need help downgrading 8525 to wm5 - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

I bought a 8525 off ebay and the wi-fi is not talking to my local network. Essentially it will connect to a secured network but you cant pull anything up from IE. You can see unsecured networks and can sometimes connect to them but pull up nothing in IE. I have tested it every which a way from home and out at a friends business location and not getting any good results..
Here is the version info:
rom 3.57.502.1
rom date 7-10-07
radio 1.48.00.00
proto ver 32.81.7020.20h
I see links on here for different versions but I am not sure which one will get me to WM5. I am experienced with a lot of Internet things but this is not one of them. I just want to have a regular phone that can get wi-fi access and all the normal extras.
Also, should I go to WM6 after I get 5 working?
thanks

found 1 fix....I disabled the proxy which seemed to allow the internet to work.
since the bluetooth and usb are acting weird i had to email myself a file to show the extended ROM.....
not sure where to go from here to get back to wm5 or even 6.

Related

official HTC wm6 problems

Hi all,
I recently flashed my X01HT used with Softbank Japan network.
I did a normal procidure
1. flash the ROM using HTC official Wm06.
It has been flashed perfect. no issues in flashing.
2. loading the Softbank AP settings.
I used the http://forum.xda-developers.com/showthread.php?t=298031&page=2&highlight=ConnSBM for getting the softbank AP settings.
these settings were working fine. without any issues. Then later i used my home Wifi lan, and then the pocket IE is not working. even if the wifi connection is connected IE give a messege "The page cannot be found. Check the name and try again."
most interesting part is, I installed opera for ppc at this point and its working fine.
When i try to connect to windows live, its connecting to gprs (which is working and connecting to server) eventhough the wifi connections is there and connected.
Now, if i delete the AP settings at this point. I can use wifi again.
at the same time now, when i try to loginn into the windows live, its give me a big error stating that the connection is not allowing me to access internet and check the settings with your service provider.
In short,
with the HTC official wm06,
I would like to use wifi connection when at home,
on the move i want to use softbank ap settings,
and i want to use windows live at home and on the move and should use the available wifi connection first, and if not available use the gprs.
guys help me, let me know if there is a sequence in which i sould be doing this or simthing like that.
POF ur the bestt person to ans this i guess.!!!

dcd 2.3.2/2.3.1 Vzw Wife doesn't look for Router

I've been noticing that when I turn on the Wifi switch on my 6800m the EV icon turns into the wifi search antenna, but the wifi radio (maybe saying this wrong) doesn't try and connect to anything (access points, adhoc) I just sits there.
Used to get the "Radar" sound affect and I would be prompted to enter my WPA key, but now it just doesn't do it.
I tried reading the thread, but its up to 55 pages and i just didn't see anything.
I've tried to install a completely rom, just what was provided, and I still cannot get the wifi radio to search for wireless networks to connect to.
Any ideal?
tharris297 said:
I've been noticing that when I turn on the Wifi switch on my 6800m the EV icon turns into the wifi search antenna, but the wifi radio (maybe saying this wrong) doesn't try and connect to anything (access points, adhoc) I just sits there.
Used to get the "Radar" sound affect and I would be prompted to enter my WPA key, but now it just doesn't do it.
I tried reading the thread, but its up to 55 pages and i just didn't see anything.
I've tried to install a completely rom, just what was provided, and I still cannot get the wifi radio to search for wireless networks to connect to.
Any ideal?
Click to expand...
Click to collapse
Try going to the connections settings and choose WiFi.
Make sure the Networks To access tab is set to Only Access Points or All Available.
While on that screen go to Menu and choose the Advanced option.
In this menu check the box that states "Turn On available network notification" and on the scroll menu choose never.
Then on the Network Adapters section make sure that the "My Network Card I connected to " is set to " The Internet " or what ever setting is made on your router.
If that doesn't work try to make sure that your Wireless Router is functioning properly. Like unplugging the power from it for a minute and letting it reset. Or if you have a Linksys router you can search for a Wifi device by pushing the Cisco Systems Button in the from ( If enabled ). This issues a broadcast to all wireless network cards but only the one with the proper key can connect to it.
I noticed that something is a little weird I guess .. besides my reference to Vzw Wife .. typing in the dark is dangerous .. especially with on contact.
Anyway
I don't think my "connections" are correct.
When I go to "Connections" with WIFI off i get
and Look at Network Nanagement I have 3 network options
Verion Wireless, My Work Network, My ISP
I have Verizon Wireless entered for both options.
I do not see "The Internet" or "Work" as options.
When I chose my network adaptor as you stated .. I can see "The Internet" and "Work".
All the other setting were as you said in regards to WIFE andthe network card.
The title of this made me laugh.
I think there is a bigger problem in that when I have the WiFi switch on ... my bluetooth disconnects. I'm going to try one of the older roms and see if it works.
Shouldn't "Internet" and "Work" be visible when I go to Network managment under Connections?
I guess there is something wrong with my phone. I tried NexVision's rom and I could search and connect to my Bluetooth headset with the WIFI switch on, but still cannot search for wifi connections.
show your wife where the router is so she doesnt have to look for it?
(sorry couldnt resist)
could you flash a stock rom and see if wifi works there? its bad news for you but i suspect hardware...
Yep ... I think its hardware also ... and the Wife has no clue what the Router is LOL.
I guess I have a semi Vogue for now.
edit:
I flashed alllll the way back to 2.1.0 and still doesnt work.
I'm downloading the radio for the stock. now and will load the stock verizon rom in a moment. I'll let cha know.
I have alltel and ever since I started using Radio 3.27 my WiFi stopped working (not sure if the radio is the issue). I hear lots of other peoples still work. When I turn the switch to on (with bluetooth off) the circle goes on around the antenna icon and then imediately turns off. I know I have several WiFi routers in the area. The laptop picks them up but the phone does not.
Any vzw users able to use wifi with the new Radio?
Ahh ... Thats interesting.
To be honest ... this is the first time I have attempted to use the wifi since on the new rom. Last nite I was at home and said, I never tested it so I tried and it did not work.
It would make since that the radio could be causing the problem, especially with the radio coming from a beta product if I'm not mistaken. Also that Beta Product being released from another carrier.
Maybe when the Official Verizon Rom is stripped down (or even the pending Sprint Rom Release), us VzW users can use the Wifi, GPS and RevA.
I'm so lazy and just dont wana reloc the bootloader, flash the stock radio, stock rom and be back at such a ... non-robust phone, just for wifi. Right now.
I wonder if any VzW users that are using the new radio and new Radio based roms are able to use wifi?
I have an xv6800 on vzw and everything works perfectly fine, including Wifi, GPS, RevA, MMS etc.
there goes my theory
Yeah that is why I stopped looking for an answer. i hear others peoples work but I have tried all the WM 6.1 roms and none of them work but I put the stock rom in and WiFi works.
Have you tryed changing the power bar for the wifi from best battery to best perforance I used to not beable to pick any thing up untill I did that then once done bam I got all kinds of routers around me. Just a thought
s10onn2o said:
Have you tryed changing the power bar for the wifi from best battery to best perforance I used to not beable to pick any thing up untill I did that then once done bam I got all kinds of routers around me. Just a thought
Click to expand...
Click to collapse
I just changed it, and rebooted and still cannot see our campus Router.
Oh well ... wifi wasn't a need right now ... just flipped the switch to give it a try.
tharris297 said:
I just changed it, and rebooted and still cannot see our campus Router.
Oh well ... wifi wasn't a need right now ... just flipped the switch to give it a try.
Click to expand...
Click to collapse
It seems as if you have a hardware issue. I have the XV6800 with a Custom ROM that enables GPS and Rev A. and it works great for me.
Other then telling you to make sure that your WiFi is searching for all access points instead of computers, I wouldnt know what else could be wrong with your phone. Might as well flash everything to stock and report it so you can get a new one, but it is very weird that it didnt work.
Who knows maybe the access point you are trying to access isn't available
I might just try putting the stock radio on and then re-flashing the 3.27 radio. Maybe it did not flash completely or maybe it got corrupted. Who knows.
Hate to say i think everones right about it being hardware problam
I forgot have you done a hard reset this has fixed alot of peoples problams in the past
I think mine is a drivers issue. I installed WiFiFoFum and it started to pick up AP's. It actually connected to my AP. I did a soft reset and it stopped working again. Not sure why it worked for that 2 minutes.
Edited: As of 3-06-08 I have installed Radio 1.40 and DCD 1.7.0 and I still have this issue. The next step is to put the stock rom back in the phone to see if it is a device issue for me.
Edit #2: Ok I put the stock rom back on the phone and my WiFi still does not work. I am figuring it is a hardware issue now. Looks like I am off to the phone store to get my replacement.
same problem, dont think its hardware...right?
my wifi was working fine VZW with dcd 2.2.6, but since the upgrade to 2.3.x ive been having issues with it. it doesnt connect to my network, or search for networks like it should. sometimes it tries to connect and stays with the wifi icon on and arrows continuously going back and forth, but wheb i tap the icon, all it shows is the cellular data connection as active and no no wifi access point. in the wireless LAN settings it lists my networks as unavailable and wheb i click add new it wont search for ones that i know are around, it just asks me to put in the name of a new one. sometimes i dont even get the flashing arrows back and forth, but just get the antenna without a circle around it.
i cant imagine it being a hardware problem that we are both having since the flash to the new rom. my phone is less than a month old and wifi was working flawlessly until i put on 2.2.3 even had remote desktop over my school network working.

Bluetooth Pan on Verizon XV6800 & Leopard Mac

Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
I've also tried a few registry edits, and used all variations of modem scripts, and got all the dialup info from verizon directly (so I know it was right ) but could not get dialup to work either. Usually not detecting a carrier, other times lockups.
I truely want to get the bluetooth-PAN working again as it did on my tilt. Anyone have this working on the MAc with a XV6800 on verizon?
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Cycomachead said:
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Click to expand...
Click to collapse
As mentioned, I have tried a ton of different methods to try and use the data connection, from using dialup settings, to trying to get the Bluetooth Pan working. I've removed and re-paired the device from my mac, flashed roms, hacked away at the registry a ton of times. Nothing seems to give so far.
I've got one more suggestion, found here: http://forum.xda-developers.com/showpost.php?p=1794133&postcount=29
I'm going to give this a shot tomorrow and will let you know how it goes.
Eponymous069 said:
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
Click to expand...
Click to collapse
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
thetaz01 said:
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
Click to expand...
Click to collapse
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Eponymous069 said:
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Click to expand...
Click to collapse
hey, ok great, i just downloaded the file, Just one question..
The file i downloaded has about a page of Reg Key changes, you didnt mention that in your "thngs to do"
Just want to see if i am to make all those changes or not.
thanks
So, your problem is in getting the internet connection to work and not connecting it to the mac, right? Does your mac recognize the phone as a modem?
If you're using MR1 I think you might need to hard reset and the soft reset right before the Verizon customizations run. You won't be able to run their apps but there won't be software to cripple the phone.
i have the same exact issue i have a new macbook pro and the bluetooth connects however the speed is slower then dial up it works perfectly however on bootcamp apple has to change the drivers
So more results.
I tried all the registry edits, (much easier with CD-Regedit so you can make the changes on your desktop) and now internet sharing does not even allow me to select a connection type, it had worked previously.
The only thing that was missing before I made the registry changes was that when I pair the phone, in the services listed, "Network Access Point" is not one of the listed services. My old phone has this service listed, and this is how I used it, where I started internet sharing on the phone, then selected the bluetooth device (phone) on the mac and selected: "Connect to Network) and it worked flawless.
Back to the drawing board. I'm going to try next to re-flash the MR1 rom and do as Cycomachead suggested and stop verizons customizations from happening.
bryanw17, what were the exact settings you used for dialup on the mac. The modem script used is probably the most important piece.
Number: #777
Username: Phonenumber (or [email protected]????)
Password: (We know this one, not sure if it's legal to post though)
Darn, I wish I could provide more help. It is indeed possible in Leopard, I had it going before I began flashing my phone - and I no longer have a data plan to test, otherwise I'd be using it a lot more!
aparently no one with a new macbook pro can get bluetooth pan to work. I have it connected however the drivers for the new macbook pro do not provide a good connection if you search the mac forums theyve been talking about it on there. I dont use a username n password however because i use the internet sharing app for the moment i am using wmwifirouter to connect online however my xv6800 doesnt charge at the same time for some reason so u can only use it till the battery dies
So some more results.
I installed ICS and all the registry edits. Then the internet Connection Sharing did not function at all. I verified the registry settings, all were fine. So no dice with me.
So back to the drawing board.
I installed a previous rom. DCD 3.2.6, and guess what? From initial flash of the phone and initial setup, no apps installed, no hacking, ICS runs and provides a network connection to my mac perfect. I also instantly notice when I pair it through bluetooth, it allows the option of "Access this device as a network port". And "Network Access point" is listed as an offered service.
I installed newer rom DCD 3.3.4, and the MR1 Rom. Neither have ICS installed initially. I can install the two files: intshare.dll and IntShrUI.exe into the windows directory without any reg edits, and then ICS works on the phone, but then pairing the phone to the Mac, and attempting to discover teh PAN service is unsuccessful. It only is discovered as a Dialup Access device, and not a "Network Access Point".
So, It appears I can get internet Sharing via Bluetooth PAN to function on the phone no matter which rom, but have not figure out how to tell the mac, or trick the mac, into thinking the "Network Access Point" service is available.
I have pulled completed registry dumps with CE-Regedit and compared the differences between the two, which there are quite a few, but not sure how to export these differences with the program so I can apply them to the other roms registry. I guess I might try a fukll backup and then restore to the new(er) rom and cross my fingers.
I'd stay with the 3.2.6 rom. and 3.42.50 Radio, with PRI 2.03, but I can only seem to make the GPS function successfully with the MR1 stock verizon rom.
Anybody want to take the two regs files compare, and see if they can find out where we can make the change to have the phone advertise the service "Network Access Point" when being paired to the mac or PC?
On one last note. I also tried the method of restoring the MR1 official rom, and then not allowing the customizations. ICS will function, but again, not advertising the service: "Network Access Point" when pairing, so it's not recognized as a valid networking method.
Where did you get those files (intshare.dll and IntShrUI.exe) to allow ICS via bluetooth?
Nevermind, I found it on PPCGeeks.
Don't know why DCD disabled the BT DUN on ICS.
I use Missing sync, and I turned on PAN then added my phone and it shoed it as a modem when I added it, but my BT connection is fairly Unrealible compared to the USB teather on Bootcamp
i was under the impression that bt pan has been whacked on macbook pro models starting from early 2008 on. anything earlier than that and it seems to work great. does anyone know why bt pan doesnt work on the newer machines and how to get it to work?

Wifi no longer visible after 6.5

I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.

WiFi not working after flashing rom

After flashing my Rose with jockyw2001's HardSPL (much thanks), my WiFi is no longer functioning. Have tried the WWE Asia rom, where I first found the problem, and then put the Orange Rom on last night to find the same thing.
The WiFi turns on, it'll scan for available networks, it'll log on to my home network, everything is fine, until I actually try and use the internet. Weather panel will not update, IE is sat on 'locating', then returns a 404.
While we're here, anyone have a working link to the O2 Rom?
Any ideas? Cheers in advance.
I can't even get this thing to work on wi-fi without flashing it. stock rom, connects to the network but refuses to connect to websites in I.E., won't connect to my exchange server over activesync, etc.
i hate this thing. it's been nothing but problems since day one.

Categories

Resources