if gprs connect function in wireless command can't work ,where i can modify to make it use?
the gprs setting is done.but some software can't connect the network still.
it's no 'internet setting' in setting panel--connections--connections,too.
atom 18538ce1938 CHS
cszdsl said:
if gprs connect function in wireless command can't work ,where i can modify to make it use?
the gprs setting is done.but some software can't connect the network still.
it's no 'internet setting' in setting panel--connections--connections,too.
atom 18538ce1938 CHS
Click to expand...
Click to collapse
have you done auto configurator after hard resetting?
without it, you wont be able to connect,.
can it be done after hard reset??
yes, most rom here, do auto configurator every hard resetting,.
Related
I am considering purchasing the T-Mobile Pocket PC Phone. I need the ability to connect a wireless device to my laptop while I travel. Can I connect the T-Mobile pocket pc phone to my laptop? If so, do I need a cable for that or can I do it via IR?
Thanks,
Brian
Wireless modem on XDA is serial cable or irda. Be sure to disable activesync before and connect your phone to laptop before pushing the "start", button.
So will W2K automatically detect it as a modem?
Well, actually not really. Regarding the infra red connection, I had to install first a virtual infra red port (http://www.cyber-mill.com/irdaw2k.zip), and then install on it the standard 33.6 Modem.
If you want, I can post how to do this, step by step, and it works.
Tekflow said:
Well, actually not really. Regarding the infra red connection, I had to install first a virtual infra red port (http://www.cyber-mill.com/irdaw2k.zip), and then install on it the standard 33.6 Modem.
If you want, I can post how to do this, step by step, and it works.
Click to expand...
Click to collapse
That would be awesome if you would do that.
Thanks!
Brian
http://xda-developers.com/phpBB/viewtopic.php?t=2643&highlight=modem
in this thread there is an url to a pdf which explane how you do it step by step
USING XDA AS A MODEM
example for GPRS connection
Before installation, note carefully (for your GPRS connection):
The access point name of your network provider
Your username and password
PS: if you don't know the access point name, open -on your device- settings/connections/internet settings
press on modify... then press on your GPRS connection
press on next: you will see the access point name.
Preliminary step: for infrared use only (skip for serial connection)
unzip irdaw2k (download from: http://www.cyber-mill.com/irdaw2k.zip)
click on setup, wait till end of installation
open your pc control panel/system/hardware/device manager
Click on ports and note on what port the infrared virtual com is installed (example: com5)
Step one: installing modem
open control panel/phone and modem options
choose modems tab. click add...
check don't detect modem
select from standard modem types: standard 33600bps
click next. install on selected port (com5 in this example)
after end of installation, click on properties for the modem
on tab Modem, confirm maximum speed 115200
on advanced, extra initialization type: AT+CGDCONT=1,"IP","xxx","",0,0
where xxx is the access point name of your network provider
select change default preferences
change flow control to none
clik OK to finish
Step two: setup the network
In control panel/network connections/ select file/new connection
select connect the internet, then manual setup
choose connect using modem. confirm the standard 33600bps
Give a name to the ISP
Choose: *99# as phone number.
write your username and password
do not use dialing rules
Step three: using XDA
Make sure activesync is disabled
Once connected through serial port or facing IR
Open wireless modem. choose connection (serial or IR)
click on start
wait for confirmation of connection on PC
Start dial-up from PC
ps: during this time, GSM phone line is disconnected
It reconnects automatically after disconnecting the modem
Hi there
I can't able to access internet using BT ActiveSync or even through cradle
when i try to access thriugh GPRS its working fine.
need help plz
Regards
Gugi
try choosing my network under connections advanced sellect network or something like that
...
Open ActiveSync if device is disconnected(maybe works also with connected device,but unable to test it now). In File>Connection Settings... Choose the option 'This computer is connected to:' to 'The Internet'. That's it.
I am looking for a driver that runs on my phone which gives access via usb to the wifi device. this would be similar to wm5storage in function (exposes phone filesystem as a usb disk).
in theory this is completely possible, and not limited to wifi, but that is all I need right now.
alternatively does anyone know of a good proxy server that can run on the phone?
thanks
could you tell us exactly what you are trying to achieve? Use your wizard as some kind of wifi modem?
In any case, you shoul check this : http://www.pocketpcmag.com/blogs/index.php?blog=3&p=453&more=1
it will maybe answer your quest about a proxy server...
AKU 3.x Roms have ICS (Internet Connection Sharing) which I know works with the GPRS but may also work with WiFi.
kyphur said:
AKU 3.x Roms have ICS (Internet Connection Sharing) which I know works with the GPRS but may also work with WiFi.
Click to expand...
Click to collapse
I hadn't thought of that I'll have to give it a try tommorow.
Kirby
I don't think ICS in AKU 3.X ROMs work with WiFi. In my device after I choose Internet Sharing, there ain't any WiFi connections to choose from. There are only BT or GPRS connections.
is there any solution bluetooth active sync over touch IX yet "Cannot find an existing bluetooth partnership with a pc that supports" even if you create one it doesn't show incoming connection.
i am having the same issue i have set up activesync to recieve incoming connections on port which i have created in bluetooth settings,and nothing happens.
webcam plus , remote amp , cool camera , R2PC , all need bluetooth active sync . i wonder if there was a registry cab or dll fix
i'm having the same problem too.. went back to vii
I'm using the same base Rom as Touch X for my own personal ROM and I had the same problem
Here is the fix for it.
Cheers
hma4 said:
I'm using the same base Rom as Touch X for my own personal ROM and I had the same problem
Here is the fix for it.
Cheers
Click to expand...
Click to collapse
thanks a lot!! it really works
ps: reset the ppc after install the fix cab
still shows same message on clicking connect via blutooth in active sync "Cannot find an existing bluetooth partnership with a pc that supports ..." i am using your rom only. com ports don't show new incoming ports which i guess is necessary.
after installing fix cab i reseted then refreshed partnership settings 3rd pic below and "serial port" changed to "active sync" but no use
screen shots below my pc is "JC" here
kamalneet said:
still shows same message on clicking connect via blutooth in active sync "Cannot find an existing bluetooth partnership with a pc that supports ..." i am using your rom only. com ports don't show new incoming ports which i guess is necessary.
after installing fix cab i reseted then refreshed partnership settings 3rd pic below and "serial port" changed to "active sync" but no use
screen shots below my pc is "JC" here
Click to expand...
Click to collapse
Worked out i had to hard reset and install this file on X rom ,thanks a million hma4.
kamalneet said:
still shows same message on clicking connect via blutooth in active sync "Cannot find an existing bluetooth partnership with a pc that supports ..." i am using your rom only. com ports don't show new incoming ports which i guess is necessary.
after installing fix cab i reseted then refreshed partnership settings 3rd pic below and "serial port" changed to "active sync" but no use
screen shots below my pc is "JC" here
Click to expand...
Click to collapse
did you overwrite your bluetooth stack before?! I AM POSITIVE that this cab will fix your problem !!! POSITIVE MEANS 100% sure.
Hard reset, run the cab, setup the com port in your computer, set the activesync on your PC, then pair your phone, then activesync via bluetooth. if my explanation is vague read the help files.
This cab is all you need to fix the bluetooth problem and will fix your problem.
EDIT :I posted this at the same time with the above post
You don't have to necessarily install this on external_rom to work. If you haven't mess around with your bluetooth stack, you can just run this cab without hard reset.
hma4 said:
I'm using the same base Rom as Touch X for my own personal ROM and I had the same problem
Here is the fix for it.
Cheers
Click to expand...
Click to collapse
thank you hma4,you are my man
p.s. if someone want to call hma4 for further support,call 01111111111111111 no matter of order of 1
hard reset and installing the file you gave does makes active sync via bluetooth possible but new problem encountered is it does not let usb active sync to initiate or work any further even if i use USB switch program and click on serial pc doesnt recoganise it any more ,but when i click on RNDIS which is set by default ,only then it recoganises and active sync animation takes place but it never connects device neither does give any messages ,i think what to do now ,do you have rndis drivers for wm6 winxp both or do i need winxp registry changes. Serial_Class in wm6 reg don't work too. although i changed it in previous time when bluetooth wasn't working .
summary : either bluetooth active sync works or usb active sync works it seems it needs a multiple registry entry to make them work properly .but they are not working together as they should.
hma4 said:
I'm using the same base Rom as Touch X for my own personal ROM and I had the same problem
Here is the fix for it.
Cheers
Click to expand...
Click to collapse
thank you so much! I tried everything this worked instantly.
Finally I can use my phone to its full potential.
hma4 said:
I'm using the same base Rom as Touch X for my own personal ROM and I had the same problem
Here is the fix for it.
Cheers
Click to expand...
Click to collapse
Does this fix also works on Crystal V4 PE ?
BR. Flemming
fschlage said:
Does this fix also works on Crystal V4 PE ?
BR. Flemming
Click to expand...
Click to collapse
I should think so.... as HMA4 is the creator of the ROM you mentioned, and he is talking about his PE (personal edition).
But I would assume that it is already build-in....
i've also installed the cab but i don't know what to do now... how can i set the things with the com-port on pc an trinity and what do i have to make in the activesync on the pc?
thanks for you help!
FallinHigh said:
i've also installed the cab but i don't know what to do now... how can i set the things with the com-port on pc an trinity and what do i have to make in the activesync on the pc?
thanks for you help!
Click to expand...
Click to collapse
ya...i would like to know that too...and,does it fix the problem which bluetooth can't be enabled after the wm6 upgrade? thanks.
Does it works on wizard wm6?
Hi Guys, I just took my old XDA2 out of retirement (it died as I broke the sim card reader) And decided I want to use it as an about the house Internet Browser and possibly media player.
I know what software to put on it to make it do what I want but I'm stuck with getting it to to connect to the net
I have tried several ROM's (I hate the official o2 rom just because of all the crap) I like the WM6 ROM as it is the latest software But when I put it back into my cradle it comes up unrecognised and wont sync with active sync.
I cant get it to sync over bluetooth either? I can pair it with my PC via bluetooth but cant synch it. As I have windows Vista I am trying to sync with windows mobile device centre and still no joy. personally i dont care f it does sync but I'm sure I need it to so that i can browse the internet on my xda????
Now I'm stuck... do I flash it with an older ROM in the hope it will start to sync with one of my 2 PC's (It really needs to work with the vista PC)
Or is there another way I can set this up regardless of the rom so I can have some kind of local bluetooth network where I can access the net and my PC via the XDA2?
I would prefer the latter as I can Use the newer WM6 ROM.
my xda2 sync just fine over bluetooth
i set the xda2 in descoverymode and add it from vista bluetooth setup
and the xda2 see the vista pc and let me add it and then
in activesync on the xda2 i pick sync over bluetooth
otherwise you can take a look at this
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
I have a lot of problems with sync over bluetooth, but my reason is really simple, I turn off microsoft firewall on my PC with WinXP and It is work fine..I can be on net and icq...
Internet over activesync???
Hi, is there a way to connect my xda to internet over activesync?
unless you have disabled it on the pc or on the pocketpc
your pda is always connected to the same network internet and otherwise when
connected to activesync
can u teach me how? after disabling connection from the pc, wat will i do nxt?
"can u teach me how? after disabling connection from the pc, wat will i do nxt?"
hhmmm at no point did i tell you to disable connection from the pc.....
settings->connections->connections->advanced->select networks
there are some texts showing "programs that automatically connect to the internet should connect using"
and a dropdownbox
select the dropdownbox item which is not called something like "my isp"
but pick the one thats called something like "my network"
then all programs trying to access the internet will be forced to use activesync as internet connection and if activesync is not connected they will fail!
Ei man, kinda misunderstood it. sorry. I'll try it later. BTW, u know how to upgrade wm2003se to wm5 or wm6? can u teach me step by step how to's? or possibly know a clear steps by steps procedure threads?
this is a copyPaste directly from the file in all the roms called READMEFIRST.txt
"Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt.exe (or HimaUpgradeUt_NoID.exe if flashing on any Himalaya other which is from than O2)
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES"
Ei man, thnx, ur advice work with activesync.
Now having prob. with upgrading stuff. cant find any ROM, can u suggest one? is wm2005 1.50 ok??? bTW, i have 02 xda II with wm2003se.
Ei myt, got a question.. u know where can i find the .exe file for on/off button???