as i've seen in : http://forum.xda-developers.com/showthread.php?t=358704
everyone in commenting about bug(the camera wont work, failed to flash,etc)
so i made this thread to help nhocbanme monitor the bug that occured in his ROM
make the report format as follows:
----------------------------------
1. HP iPAQ version : rw6828,rw6818 or rw6815
2. ROM from nhocbanme that is used : 1.1, 1.2 , 1.3, or 1.4
3. Bugs found : camera not working, or some application that's installed wont work(list the name of the application),etc
4. Suggestion : change the keyboard color into default, or add SRSWOW,etc
----------------------------------
this way nhocbanme and all of us user of his ROM could evaluate it and decide which is the best.
dj_kopral said:
as i've seen in : http://forum.xda-developers.com/showthread.php?t=358704
everyone in commenting about bug(the camera wont work, failed to flash,etc)
so i made this thread to help nhocbanme monitor the bug that occured in his ROM
make the report format as follows:
----------------------------------
1. HP iPAQ version : rw6828,rw6818 or rw6815
2. ROM from nhocbanme that is used : 1.1, 1.2 , 1.3, or 1.4
3. Bugs found : camera not working, or some application that's installed wont work(list the name of the application),etc
4. Suggestion : change the keyboard color into default, or add SRSWOW,etc
----------------------------------
this way nhocbanme and all of us user of his ROM could evaluate it and decide which is the best.
Click to expand...
Click to collapse
Thanks bro so much!!!!
I'll try to make best ROM
1. HP iPAQ version : rw6828
2. ROM used : nhocbanme's 1.4
3. Bugs found : Camera screen flickers. Autoconfiguration does not apply my MMS & GPRS settings. System volume is still soft compared to other ROMs.
4. Suggestion : Implement the battery drain improvement like homers's ROM.
Side note : My device unable to power up from standby randomly after flashing to WM6 rom. Any rw6828 users out there having the same issue as me ? I suspect is the activesync auto run during device standby. I've applied the fake server tweak but still the same.
cwwang16 said:
1. HP iPAQ version : rw6828
2. ROM used : nhocbanme's 1.4
3. Bugs found : Camera screen flickers. Autoconfiguration does not apply my MMS & GPRS settings. System volume is still soft compared to other ROMs.
4. Suggestion : Implement the battery drain improvement like homers's ROM.
Side note : My device unable to power up from standby randomly after flashing to WM6 rom. Any rw6828 users out there having the same issue as me ? I suspect is the activesync auto run during device standby. I've applied the fake server tweak but still the same.
Click to expand...
Click to collapse
OK, i'll do it
That was a nice and quick reply from you .
Btw can you try to delete all folder with "xip" in their file name in SYS & OEM folder when make image on your next rom ? Maybe that could solve some Screen Of Death (SOD) issue. Just looked into some interesting post that someone in xda-developers found here :
http://forum.xda-developers.com/showthread.php?t=339792&page=6
1. HP iPAQ version : rw6815
2. ROM used : nhocbanme's 1.4b
3. Bugs found : Camera don´t work. Autoconfiguration does not apply my MMS & GPRS settings, so i can´t send or receive messages (portugal).
4. Suggestion : keep the apps from hp camera from wm5 original rom??!!??
hi ncohbanme,.
let me try to look at your xip, the SOD issue, might come from there,.
and i think you dont need to delete the xip folder, LangDB (it is used by anopther module, if you delete it, some module will not be able to search for it, then you'll have a bug)
can you upload your XIP.bin?
Actually, XIP folder isnt necessary in the kitchen (inside ROM folder), but you need one ROM file that have a new OS, and best XIP, inside the ROM folder,.
may it help you,.
----------------------------------
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.4
3. Bugs found :
after using wm5torage and when u use file explorer the SD card is not avaliable until u take out the card and put it back into the slot again.
4. Suggestion :
SRS WOW is functioning if you install Netv3.5.cab again(since i think the rom has already got net3.5 pre-installed),its strange because it says error installing at the end...but the SRS works after reinstalling netcfv3.5...
----------------------------------
1. HP iPAQ version : rw6815
2. ROM from nhocbanme that is used : 1.4
3. Bugs found : Cam doesnt work
4: Suggestion : Nothing \o/ the cam is crap anyway. Thnx!
nphix said:
1. HP iPAQ version : rw6815
2. ROM used : nhocbanme's 1.4b
3. Bugs found : Camera don´t work. Autoconfiguration does not apply my MMS & GPRS settings, so i can´t send or receive messages (portugal).
4. Suggestion : keep the apps from hp camera from wm5 original rom??!!??
Click to expand...
Click to collapse
i fond this rom http://rapidshare.com/files/78871669/biohazard.rar.html, from pda hack for rw6815, and i´ve flashed mine with this rom and the camera works just fine.
the camera app is the one from nhocbanme ver 1.04a for 68x8, and works great.
however my 6815 keeps freezing with this rom, it has many bugs
anyone help solve camera bug from nhocbanme ver 1.04b?
well, I am using a 6828 from Malaysia, does not have any prblem with the camera... and the camera seems having better lighting detection now anyway...
nphix said:
1. HP iPAQ version : rw6815
2. ROM used : nhocbanme's 1.4b
3. Bugs found : Camera don´t work. Autoconfiguration does not apply my MMS & GPRS settings, so i can´t send or receive messages (portugal).
4. Suggestion : keep the apps from hp camera from wm5 original rom??!!??
Click to expand...
Click to collapse
wm5storage works but when deativated must take off card
sim manager after saving contacts to sim they became unhnamed
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
3. Bugs found :
#1: USB ActiveSync disconnect in few minutes, Bluetooth ActiveSync works properly, however
#2: Some keyboard input methods do not work :-
touchpal - fail to startup
tengo thumb - nothing happens after installing
#3: PCM Keyboard (Built-in) does not work
4. Suggestion : Thx so much!
q_ware said:
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
3. Bugs found :
#1: USB ActiveSync disconnect in few minutes, Bluetooth ActiveSync works properly, however
#2: Some keyboard input methods do not work :-
touchpal - fail to startup
tengo thumb - nothing happens after installing
#3: PCM Keyboard (Built-in) does not work
4. Suggestion : Thx so much!
Click to expand...
Click to collapse
#1 I don't meet this problem, try to HardReset.
#2 I think have problem with SIP.
nhocbanme said:
#1 I don't meet this problem, try to HardReset.
#2 I think have problem with SIP.
Click to expand...
Click to collapse
It seems that it hangs at the windows mobile 6.1 screen (green) everytime after I do a hard-reset, but then the 'first start welcome screen' appears after I doing a soft reset
the problem in #1 is fixed after hard-resetting
thank you so much!
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
problem found
1 cannot change keyboard
2 camera work but some application use camera feature not work for hp model it can use with atom model
Thank .
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
problem found
1.Bluetooth earpiece asnwer the call, the sound come out from the phone & not from the earpiece.
2.Cannot copy sim contacts to the phone. No Sim manger
HP Rw6828 ROM v1.5a wifi bug
after refresh this rom, everything comes right! however, i cannot connect to wifi AP with WPA-PSK TKIP. I'm sure the Key is correct, and can be used to make connection (I did tested on my laptop). How come this happen?
tltang13 said:
1. HP iPAQ version : rw6828
2. ROM from nhocbanme that is used : 1.5a
problem found
1.Bluetooth earpiece asnwer the call, the sound come out from the phone & not from the earpiece.
2.Cannot copy sim contacts to the phone. No Sim manger
Click to expand...
Click to collapse
#1 does not happen to me, I'm using Bluetooth Plantronics, it works perfectly fine
1.4 Bugs
HP RW6818
ROM Version 1.04 68x8
Working:
Camera, flash 5-10fps video, great nightmode
BT A2DP all working including BT Keyboard and Stereo BT
Bugs:
- WM5 Storage Card Bug (after deactivate SD not detected need to rem/ins)
- Video Capture (noisy video capture)
- Transcriber hangups (initial use of transcriber toolbar hangs the phone)
- Constant screen updates with the file explorer (always refreshing)
- Fast battery drain compared to wm5
- No full battery charge notification or indicator continuously charging
- Equalizer non-functional
Recommendations:
Please include LG Today Menu WITH Menu buttons
QuickMenu start menu replacement
HTC AGC controller (Hermes works, for HP's Automatic Gain Control)
Additional Frames for Camera (i could supply, around 7mb additional)
also UPX4PPC and all added apps should be compressed by UPX
Related
Yesterday I flashed my Charmer with gullum Prophet Touch V5. beta rom. Very nice, and also it is a quick rom too. The cube is also working by pressing the lower left button ("Record Button" or "Cassette Button" or "Tape Button").
Every app is working fine... Camera is working now with FIX.
UPDATE: Camera will work with this update http://forum.xda-developers.com/attachment.php?attachmentid=45688&d=1185974087
link to the thread by gullum:
http://forum.xda-developers.com/showthread.php?t=318877
Thats what I did:
Downloads:
Prophet Touch V5. beta -- http://rapidshare.com/files/44842758/ProphetTouchV5beta.zip.html
Download the xbeta Chinese WM6 rom -- http://rapidshare.com/files/27671349/2007-03-26_Charmer_WM6_CHS_OS_msyh__plus_consam_xBeta.exe.html
1. Flash back to normal Wm5 Akku 3.3
2. unpack Download the xbeta Chinese WM6 rom to c:\charmer
3. Copy Cert_Spcs.cab and EnableRabi.cab to your charmer (itsutils folder)
4. run both cabs and than soft reset
5. turn phone off (not the charmer - go to flight mode)
6. copy the os.nb from touch V.5 beta to c:\charmer folder
7. besure that there is a connection to pc and pda
8. go to c:\charmer and run xBeta cmd
9. typ in the number witch the os.nb has
10. wait for the app till it gets green again (ca. 15 minutes)
11. make hard reset
12. do not allow to install the extended rom -- soft reset
ENJOY
Sorry for my poor english!
Great thanks to gullum, adexxx and the boys and girls from xbeta,
also to all the developers around here.
GREETS from germany
camera might work
Charmer Touch rom
Charmer Touch rom
can any one try to see if this one works on Charmer it is almost the same as the Prohpet Touch rom I made but with Charmer drivers and camera.
but I do not have a Charmere and therefor can not test it
thanks gullum
I will try tonight
ps. this is the "best charmer rom" ever made
anja31 said:
thanks gullum
I will try tonight
ps. this is the "best charmer rom" ever made
Click to expand...
Click to collapse
hehe and I didn't make it for charmer
gullum said:
someone might try changing or deleating 1 regestry
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\Captparam\ExifInfo]
"Make"="HTC"
"Model"="PM300" <-- change this to the model number of charmer
if it doesn't work try to delete it
Click to expand...
Click to collapse
this rom are the best news of the day for me
did this registry-hack work?
I don't think so, this key configures EXIF data in photo files.
---
update
I tried to delete this registry key and camera won't work. I think because driver on Prophet I slighty diffrent than driver in Charmer. To make camera work we must create a CAB with driver and registry setting and maybe other camera application.
cheers.
great ROM
I've just tried this rom and think it is really good, thanks.
I've tried the camera fix on this thread and also the cab file on the other recent wm6 thread, neither work.
I've also noticed that my screen ok button does not work. I have to use a hardware button. Any ideas?
thanks
pjam
I need to find what camera driver Charer uses... the Prophet & Hermes uses S5K3BAFX.dll and wizard uses OV9650.dll so I need to figur out which Charmere uses then maybe I could make a cab for the original Charmer camera for you guy to use
pjam said:
I've just tried this rom and think it is really good, thanks.
I've tried the camera fix on this thread and also the cab file on the other recent wm6 thread, neither work.
I've also noticed that my screen ok button does not work. I have to use a hardware button. Any ideas?
thanks
pjam
Click to expand...
Click to collapse
That is because the alignment of the Touch.dll thats been modified from the elf(HTC Touch) touch.dll you will need to align the screen a bit differantly
on the left side align spot on to the + but on the right side align the bottum + a bit abow and the top + a bit beneth
Thanks for that. It seems to work some times but not always.
The fix in this thread allows the camera to start but then a message is displayed saying that it could not be configured.
http://forum.xda-developers.com/showthread.php?t=319151
pjam
pjam said:
Thanks for that. It seems to work some times but not always.
The fix in this thread allows the camera to start but then a message is displayed saying that it could not be configured.
http://forum.xda-developers.com/showthread.php?t=319151
pjam
Click to expand...
Click to collapse
That's because the new camera uses s5k3bafx.dll and the charmer uses ov9650.dll
I'll make a cab of the camera used in Essentials 000.2 distrib 1 for you guys... It will take some time because there are quite a lot og regs that I need to tap in by hand to be prisise it 1133 lines
so be patiand anyway I'm sending V5 beta 2 for testing now so it might work for you guys too
That would be great.
I think i have the screen issue sorted. It has to be aligned quite accurately.
Many thanks
pjam
Charmer camera
could someone try this cab and see if it works?
View attachment Charmer_Gullum_camera.CAB
if it works I'm verry happy then I can make cab's 00 times faster then before
Just tried it. Can't see the camera app in programs anymore. Pressing the camera button shows the timer for a second then nothing.
pjam said:
Just tried it. Can't see the camera app in programs anymore. Pressing the camera button shows the timer for a second then nothing.
Click to expand...
Click to collapse
could you try to see if it works from the windows folder
maybe I have forgot some shortcut in the cab
if that works I'll make a new cab with shortcuts
Camera isn't working from windows directory. You must change registry settings to new camera driver.
Hi
have the same problem camara dont start then i try this fix
k0ster_WizaCharmCamFix.cab
after this the software start but device driver cant load
can anyone upload the charmer driver cab for the camera?
jerry
CAMERA WORKS!!! (not at all)
Install Charmer_Gullum_camera.CAB (Gollum Post) & k0ster_WizaCharmCamFix.cab (last post) & my regfix (HTC_Camera_regpath.zip) from attachment and camera works, but camera preview is flipped. But in other ROM this issue is solved. There is another bug, when you close Camera app, screen stays in Landscape.
I try to solve this bugs today.
ps Install regfix with registry app, for example: Resco Exporer, using Import function.
Cheers.
-----
I solved flip-bugs, will upload instructions soon.
I can confirm that the camera now works with the above fixes. I would really like the fix for the flipped view and screen rotation though.
thanks
pjam
FINAL PATCH (I think )
There is a final FIX for CAMERA (attachment: charmer_cam_fix_touch.zip) . You don't have to install other patches (Gollum, k0ster) for Camera. Install this CAB only. Camera is working propertly. If anyone have problems - please post.
How to Install:
1. Download ZIP file. Unzip.
2. Copy CAB to PPC
3. Install on PPC
4. Softreset PPC
5. Voila! Camera is working.
PS I can upload fix without Picture Themes (more free space on storage) if anyone wants.
WARNING: ROM Updating is NOT without risks. Please read the instructions carefully!
Preclude:
I haven't expected my ROMs will still frerquently updated today. I want to thank all of you who help me. You can donate me if you like my rom. Even $0.02 will satisfy me and encourage me to further support the rom.
Acknowledge:
Bepe for great tools. wuqiyu007 for porting XIP part. Garmin for great tutorials. abusalza for useful reference ROM. Homer285 for useful reference ROM. l3v5y's for great oem packages.
All people who help me testing this rom especially hochengsoon, kusanagi, slys3171989 and edywanwan.
ogel2, Tabbe and ronalddo for testing the atom rom.
Special Thank to BesFen, he helps me making an Manila 2D enabled new ROM and give me many good suggestions.
Rom Selection Guide:
There are so many ROMs on my thread that the new comers can hardly find which one fit their needs. This section will describe each ROM concisely and state my suggestion.
->If you want a stable ROM with Chinese support:
The main series of "clean and stable" ROM will fit you best. This ROM is also well supported by me and the stability is evaluated by time. I recommend you the b221 ROM.
->If you want to try something new and bleeding edge versions
The WP 6.5 series ROM fit you best.
->If you want to try Manila 2D enabled ROM:
There are 2 versions: Jade version and Besfen version. I do not support the Jade version very well due to time limitation. Besfen version is newer and supported by him. I think you can try Besfen's version first.
->If you want to make your own customization:
Try my kitchen. It is supported by me and you can ask questions about it.
->If you want ROMs of other languages:
There are CHS, CHT, GER versions.But they are unsupported and a little old. The stability is OK.
->If you want Atom ROM:
THere are Atom-R2 Rom here. But it is not supported. You can try it.
HP6828 Clean and Stable WM6.1 WWE rom:
The rom have Jade's kernel and kaiser's system as the base. The pagepool is 6M for stability as well as performance.
If you want to know what is good about Windows Mobile 6.1 comparing to 6.0, you can read this small PDF file: http://www.mediafire.com/?xdlgomziwtq
HP 6828 Clean and Stable WWE ROM:
Features of this rom :
1. Almost the same as the MS's Emulator's stable ROM.
2. Add some of O2 and HP's OEM apps like camera and wireless manager.
3. The HP's driver mixed with other enhancement.
Known bugs of this rom :
1. The Bluetooth PAN is not working at all. I include Bluetooth DUN support as a workaround.
2. In a very very rare case wi-fi will be on after reset.
3. Battery life is slightly shorter but better performance. A patch is needed to get longer battery life. (Download patch from the second thread or use Schap's Advanced Configuration tool).
4. The sound volume is a little low. SRS WOW HD will increase the volume dramatically.
5. The Bluetooth A2DP auto connection is working but one need to turn the device's BT on first then headset's or it will not work.
6. MMS program can not capture pictures and video.
7. Ipaq audio's headset ability will be disabled when powered off then on. Click on the slide will activate it.
8. Can not copy SMS to SIM card.(Thanks whtwww for notifying me the bug)
9. The screen may shift after flashing the ROM. Workaround: Do a soft reset on the welcome screen and then recalibrate the screen.
10. Bluetooth problem in WM 6.5 ROMs.
Update 20: 20081012,b189
1. SYS: Brand new 19971 system bringing many new changes from M$'s newer stable system. Visible changes are "close icon", "alarm setting", "menu font size". There are also many internal changes.
2. SYS: Memory management imporved.
3. OEM: Bluetooth BPP removed. As it consume memory and ROM space but not useful.
Update 21: 20081028,b196
1. SYS: Re-porting the 19971 XIP. It will be more stable. The shifted screen problem seems to be fixed. Memory will go down slower overtime. (This is a minor update without registry. You can restore backup from previous update)
2. OEM: Remove "Activesync mode". It is the same as settings->Connections->USB to PC
Update 22: 20081209,b199
1. SYS: Fix some VGA->QVGA problem in last release.
2. OEM: Add bluetooth security.
Update 23: 20090129,b229
1. Archsoft MMS update to latest version
2. Internet Explorer Mobile 6
3. Adobe Flash Lite 3.1 that is compatible with flash 8 and 9.
4. Microsoft Touch. You can touch and scroll now!
5. Windows Live updated to the latest version.
6. Fix Button Lock Issue
Update 24: 20090517,b294
1. Initial release based on WP 6.5
Note: The bluetooth is not working very well. Some previously added OEMs has been deleted due to ROM space problem.
Update 25: 20090519,b299
1. Fix some module addressing problems.
2. Fix the sound problem after disconnecting bluetooth A2DP device.
3. Windows Widget is left out in update 24, now it returns.
4. Fix the ringtone mode setting problem. It will now save the user settings on ringtone and vibrate.
Update 26: 20090528,b307
1. Fix the system sound problem after making bluetooth headset phone call.
2. Fix some more module addressing problems. (Some software compatibility)
Update 27: 20090605,b317
1. Rebase on the M$'s official emulator release.
2. Now windows live is working.
3. Now widget is linked correctly, try: http://rapidshare.com/files/240982956/Money.widget and http://rapidshare.com/files/240982612/Weather.widget
Update 28: 20090610,b318
1. Stability Fix.
Update F: 20091012,b-f
1. Rebase on M$'s new official system.
2. Release with full set of kitchen including the XIP porting tools.
Update 30: 20100218,b337
1. Rebase on M$'s new official 6.5.3 release.
Other ROMS:
HP 6828 Simplified Chinese ROM Special Release
1. Based on b92 of WWE Rom with fixes and VoIP support. All OEM are Simplified Chinese.
HP 6828 Traditional Chinese ROM Release 2
1. Include .NET Framework 3.5
2. Notification sound fix.
3. Camera importing function fixed.
HP 6828 German ROM Release 1
1. Initial Release based on b137 of WWE Rom. Some OEM apps are still English.
Atom(WWE) release 1 ROM
1. initial atom release based on b95 rom of HP's.
Atom(WWE) release 2 ROM
Based on 6828's B156.
20270 Kernel!
Some HP Apps replaced with atom's.
6815 Camera Patched ROM
The camera works. But the picture is upside-down.
Jade version.
I add a "secret" before just want to suprise you.
This ROM conatains many resourses from HTC Jade aka HTC Touch 3G.
It tries to resemble the HTC Jade in 6828.
It is pure WWE ROM, and your location in reginal setting does not have your location, please ask me for a more complete wince.nls.
It also does not have Microsoft Yahei font and the Windows Live.
The changelog are long but most things are coming from HTC Jade.
Besfen's Effort to Add Manila 2D to WM6.14 ROM Update to B229:
Thanks Besfen to enhance the Manila 2D experience in my ROM.
Manila 2D in B221 Hellowordl1's ROM:
1. Change HTC album to previous version, this fix HTC Album bug on Jade Secreet ROM (take from M2D thread).
2. Fix Power/battery indicator in Setting System.
3. Registry tweak, change the Task Manager Low memory of auto close app from 9MB to 3MB, so any app don't frequent close.
4. Registry tweak, add M2D ass exclusive app in Task Manager, make M2D not frequent close.
5. Change Internet Widget plugin to Internet Explorer.
6. Change Internet Widget’s default Web Site to…of course this 1st page thread…ha…ha…ha…
Removed App in Original ROM:
1. Transcribber, I get more free memori and ROM space.
2. Adobe Flash.
Note:
• Install Google Map to make Location Widget Work properly, you can download it from M2D forum.
• Install You Tube App, You Tube Plugin in Internet widget will work properly, you can download it from M2D forum.
B229 updates V3:
Based on clean ROM b229 and
* Fix WMP problem in previous release.
Download Link M2D B221
http://www.mediafire.com/download.php?ygd5libzymy
Download Link M2D B229 V3.1
http://www.mediafire.com/?ki0n2odnmel
Kitchen World:
The kitchen is a set of tool and files to rebuild and customize the ROM for convinence. I hope cookers enjoy these tools. I also released the non-supported 20273 system in hope of external force to stabilize it. Atom's kitchen is a little old. But it is still a good base to build atom's ROMs. Update f is essentially a new 6.5 kitchen. You can enjoy that more.
Donation
Thank you very much for those who has donated and supported me. You do not need to donate as 6828 is not exciting any more. You can show your thanks by following this thread.
Download:
HP 6828 WWE ROMs:
WM6.0:
20080119b29:http://www.mediafire.com/?7mnvog2nycl
20080216b30:http://www.mediafire.com/?0ymzgmgeeab
20080219b35:http://www.mediafire.com/?fho2xl3zi1k
20080305b36:http://www.mediafire.com/?cziyhxeywfz
20080309b39:http://www.mediafire.com/?ic2lz4nkvgo (Very Old recommended version)
20080314b45:http://www.mediafire.com/?mykgxdda51m
20080321b46:http://www.mediafire.com/?hxoemfu2whx
WM6.1:
20080405b85:http://www.mediafire.com/?mjlmvmmnjdb
20080407b92:http://www.mediafire.com/?bfz5yjoxmay
20080411b95:http://www.mediafire.com/?lljgzmmzzkg
20080514b99: http://www.mediafire.com/?1vxjdxgar2y
20080524b101: http://www.mediafire.com/?gxjy95tjmxd
20080614b105: http://www.mediafire.com/?ztzmtkqb3mx
20080614b110: http://www.mediafire.com/?i9xbfz9mrk4 (Old Recommended version)
WM6.1 new:
20080623b134: http://www.mediafire.com/?qojwjmtbtg1
20080624b135: http://www.mediafire.com/?bddhmlwo2hj
20080627b137: http://www.mediafire.com/?cbyijrmi2yu
20080701b142: http://www.mediafire.com/?y2xjxymfdx9
20080802b153: http://www.mediafire.com/?ge69olz7mli
20080806b155: http://www.mediafire.com/?ymf9y0lte9z
20080810b156: http://www.mediafire.com/?ltjczyzryxn
20080920b165: http://www.mediafire.com/?0xmzntky9tz (Recommended old version)
20081012b189: http://www.mediafire.com/?33a2dmo5eig
20081028b196: http://www.mediafire.com/?zmzzoozjmoj)
20081201b199: http://www.mediafire.com/?lo1erfd3g0o
20090107b229: http://www.mediafire.com/?xjihw4wmmoh (Recommended Stable release)
20090422b279: http://www.mediafire.com/?wdy32tngzd3
WM 6.5:
20090413b251: http://www.mediafire.com/?th1nticzj2d
20090517b294:http://www.mediafire.com/?rn2zmmz2jnt
20090519b299: http://www.mediafire.com/?uzqf2cmzlov
20090528b307: http://www.mediafire.com/?uzdmnw5zwmz
20090605b317: http://www.mediafire.com/?zjnjyhzelzj
20090610b318: http://rapidshare.com/files/243529642/6828-WM65-20090610-b318.tar.gz http://www.mediafire.com/?1521mnng3ru
20091012b-f http://www.mediafire.com/?bxlz1xo3fts
20100218b337: http://www.mediafire.com/?y2yiegmizb5
Other Roms:
6828 2D Manila Enabled Jade ROM: http://www.mediafire.com/?4m2ydgltdad
Chinese simplified WM 6.1 Clean ROM: http://www.mediafire.com/?hqtwjmygdlt
Chinese Traditional WM6.1 Clean ROM R2: http://www.mediafire.com/?mtnjs0t0gzn
German WM6.1 Clean ROM R1: http://www.mediafire.com/?xi4n20z4wlp
6815 camera patch may work version r2: http://www.mediafire.com/?lihy0vcvnxd
6815 camera patched version R3: http://www.mediafire.com/?2mjhtgjox0x
Atom release 1: http://www.mediafire.com/?xixrdywxnjy
EXTROM(Should be installed on Atom if you want Atom's ROM working properly):http://www.mediafire.com/?tjyzmvific9
Atom release 2: http://www.mediafire.com/?jxfm09sbces
(Thanks ogel2 for uploading)
Kitchens:
6828-kitchen: http://www.mediafire.com/?xmwm0lxtdxc
atom-kitchen: http://www.mediafire.com/?3z0gmzjmkzm
20273 system: http://www.mediafire.com/?5m0dbdf5271
How to flash using SD Card(Recommended):
Extract diskimg.nb0 to a sd card (<1G is better), insert it into 6828, press&hold 2 soft key(-) and reset. After a while, it will be in PBL mode, wait 15-20min, it will hard reset itself and flash done. The first boot time is very long so be patient , you may click the screen so that the device will not auto-off.
How to flash from PC with Windows XP (It is ok to run it in vmware)
Thanks Knave and rcperez for posting their detailed experience so I can write this section. Also thanks jimmyspa for improving the addheader's performance greatly.
1. Check your Boat loader version
(do a soft reset, and check the value printed at the bottom during the HP logo screen)
2. If you noticed that the last line states BL 1.00.05, it means you have boat loader 1.05 installed. You will need to download and flash your phone back to 1.01 via ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34053.exe (VERY DANGEROUS, FLASHING VIA SD IS MUCH SAFER!)
3. After successfully downgraded your phone's boatloader, or your version was already v1.01, you can proceed to flash your phone to the rom.
With the check done, proceed with the required files.
1. Go to download section to download the rom file.
2. Download the file pcupdate.zip attached in this thread and unzip the contents to the same folder you used in step 1.
3. Download the latest Rom file and extract to the same folder
4. Run BuffereAddHeader.bat. It will take seconds to generate a diskimage_Ver.nb0. (You should have Java Runtime > 1.50 installed, http://www.java.com/en/download/manual.jsp)
5. Move your phone to boatloader mode ( press the two - keys, follow by a poke at the soft reset hole with your stylus )
6. Connect the phone to the PC
7. Execute the Device Utility Update program and wait till it verifies the state. Click on Update Item "All" use cursor keys to change it to "OS ONLY" then hit next **** SELECT "OS ONLY", if you cant change it to "OS ONLY" DONT PROCEED!!! It should detect your device as Model 0 etc.
8. Press Next to begin flashing.
9. Once completed, the phone will reset by itself. Wait for a while for it to startup.
Here are the notes & files provided by hochengsoon with README for flashing via Windows XP
PC flashing using BL1.0.1 must be done from C:\Windows\Temp, so why not start everthing from this folder ie PCUpdate + ROM + missing file(s).
PCUpdate1.rar - http://www.mediafire.com/file/k5jumzzg1mm/PCUpdate1.rar
PCUpdate2.rar - http://www.mediafire.com/file/zqykwmteizz/PCUpdate2.rar
How to downgrade to WM5 using PC
1. download wm5 rom from http://h20000.www2.hp.com/bizsuppor...ng=8&taskId=135&swEnvOID=2067&hpappid=NextGen
2. run it and after entering the updating screen cancel it.
3. replace the hpRUU.exe in c:\IPAQ(default install) with the attached file hpRUU.exe in archive hpRUU.zip
4. Connect device to PC, then press and hold two "-" button and reset.
5. Run hpRUU.exe and do a normal update.
Note: you may delete eboot*.nbf to prevent bricking the device.
How to downgrade to WM5 using SD Card
1. Download this file: http://www.mediafire.com/?mbwxx9szmyz
2. Extract diskimg.nb0 to your sd card.
3. Enter bootloader mode by pressing two "-" keys.
4. Wait .
How to recover from semi-brick state:
1. Prepare a sd card with proper diskimg.nb0.
2. Pull out the batter for a few minutes.
3. Press and hold two "-" button and at the same time, put the battery in.
4. Wait a few second and release the button, then after a while, the device will be in bootloader mode.
How to use kitchens (NEW writen by besfen):
Req: .NET2.0+
1. Download Kitchen Tools and extract it.
2. If you have diskimg.nb0 file that you want to modified, copy it to the TOOLS directory and ROM directory.
3. In "cmd", "cd" to the TOOLS directory.
4. Run prepare_imgfs.exe diskimg.nb0, it will dump the .nb0 file.
5. Run viewimgfs.exe imgfs_raw_data.bin, it will make dump folder in the TOOlS directory.
6. Run pkgtools.exe, select the dump folder and build package, it will make 2 folder, SYS and OEM.
7. Sometime some files don't move to that folder, you can open missing.txt file to know where the location of that file, move the files to the location said in the missing.txt. Finally, there isn 't files in the dump folder, all file are in the SYS and OEM. Delete missing.txt and OS.bat in OEM folder. SYS is M$ related, OEM is oem added things.
8. Replace the original SYS and OEM folder in the kitchen with new extracted ones.
User can change the OEM at will except the OEMDriver folder. I have modified it many times to get it stable on new ROM.
To add a new OEM Software, you need:
1. Extract the cab file of the app, you can use wincab manager to do this.
2. Put the extracted files to the new folder in the OEM. The folder name don't contain space, you can use _ (underscore).
3. Type the registry in the one of .rgu file. There are many .rgu file there, you can edit it with notepad. if you finish save as, choose all file and unicode type, but don't change the name of that .rgu file.
4. Make a shortcut, open initflash.dat file with notepad, the location is in the OEM_lang folder, type the shortcut name. You can read the existing shortcut in that file to know how to do it. Remember to make the shortcut file first in the folder of each app.
After that, just run build.bat file in the kitchen directory, follow the instruction and your ROM already created in the FLASH FOLDER.
GOOD LUCK.
Useful apps for this rom:
http://www.mediafire.com/?sharekey=2c6d733c38f6ee1ed5a101cf914073b49519981328cd602c
Description:
addheader.jar: add 12 byte header and generate diskimage_Ver.nb0 from diakimg.nb0
hp_files.zip: Files for downgrading to wm5.
hpRUU_patched_from_language_and_model.rar: patch hp RUU.
BQ27200Expert: Battery Calibration software.
Good job !!!
Try upload to http://www.mediafire.com
I think many peoples need it
nhocbanme said:
Good job !!!
Try upload to http://www.mediafire.com
I think many peoples need it
Click to expand...
Click to collapse
Thanks for your advice, I have uploaded.
Hi,
May I know where's the link to download?
Thanks
dejazz said:
Hi,
May I know where's the link to download?
Thanks
Click to expand...
Click to collapse
Here:
http://www.mediafire.com/?7mnvog2nycl
As I had expected, there're few people want this rom. So I will stop uploading the updated versions.
wait a minute,i wan this rom..it is a nice but have you figure out how to solve the wifi flash light not on problem??i wan the update version of this rom.
but this flash rom abit troublesome,can u pls help to cut the 12bytes header n upload for us??
thanks~
hhhh3 said:
wait a minute,i wan this rom..it is a nice but have you figure out how to solve the wifi flash light not on problem??i wan the update version of this rom.
but this flash rom abit troublesome,can u pls help to cut the 12bytes header n upload for us??
thanks~
Click to expand...
Click to collapse
First, the wifi light is working on my 6828. The camera flash light do not work though.
Second, I have ALREADY cut the 12 byte header, so it is safe to flash using a SD card. I said that if you need to flash using RUU you need to ADD 12 BYTE.
Thanks for your interest in my rom.
helloworld1 said:
First, the wifi light is working on my 6828. The camera flash light do not work though.
Second, I have ALREADY cut the 12 byte header, so it is safe to flash using a SD card. I said that if you need to flash using RUU you need to ADD 12 BYTE.
Thanks for your interest in my rom.
Click to expand...
Click to collapse
cool,thanks for this nice rom
This is interesting. Can people report whether this is a stable ROM, other than the noted bugs?
Also, will it flash with a 2gb miniSD card? That's all I have.
Thanks.
i need a clean rom too, nhocbanme's rom is great but it's not clean. Dirty with HTC applications and full of black which i don't like.
i'm currently using this rom since a month ago, i think this is a stable and great rom. work flawlessly.
thanks helloworld1
i'm waiting for ur next update rom
Hellooow....helloworld1,
I ve flash this ROM today. It took about 15 minutes. Very good and clean ROM. Everything works perfect, Bluetooth stereo working nice, JAVA midlet also okay, camera works good with flash automatically light during photography. High memory after install 70 applications still got 42MB internal memory left. Hmmm....what else to comment...nothing , all perfect
When are you going to release WM6.1 with this type of super clean ROM....waiting....waiting
Keep up the good work!!!
I've splatted my 6815 with this ROM today, and thankfully it works a treat! It takes a while for its first boot but then I started to breath again when it came up.
The camera doesn't work at all though. The program loads but errors with "failed to get jpeg stream" or similar when clicking the cam's hw button. However that's a small sacrifice to pay when the pay off is WM6, that HP can't be bothered to provide.
Many thanks to helloworld1, and here's hoping you release WM6.1 in due course. \o/
ruffage said:
I've splatted my 6815 with this ROM today, and thankfully it works a treat! It takes a while for its first boot but then I started to breath again when it came up.
The camera doesn't work at all though. The program loads but errors with "failed to get jpeg stream" or similar when clicking the cam's hw button. However that's a small sacrifice to pay when the pay off is WM6, that HP can't be bothered to provide.
Many thanks to helloworld1, and here's hoping you release WM6.1 in due course. \o/
Click to expand...
Click to collapse
6815 may need a patch to get camera working. You may need to search around.
I do not have a 6815, so I will not embed it in this rom.
ehaezar said:
i'm currently using this rom since a month ago, i think this is a stable and great rom. work flawlessly.
thanks helloworld1
i'm waiting for ur next update rom
Click to expand...
Click to collapse
I haven't find any solution in the bugs in "bad section". So maybe I will not do minor update to this rom. Also, it will, maybe, save your time updating something worthless.
What about 6.1:
Due to the reason that 6.1 haven't been official released, I do not have a strong will to make a unstable rom.
I will release a 6.1 rom if it is stable and no clean one have released.
ruffage said:
This is interesting. Can people report whether this is a stable ROM, other than the noted bugs?
Also, will it flash with a 2gb miniSD card? That's all I have.
Thanks.
Click to expand...
Click to collapse
No, NEVER TRY TO UPDATE IT WITH CARD MORE THAN 1GB!!
It will almost surely brick(not badly) your device that causes some unnecessary trouble. After that you can still flash again.
So there are 10(!) choices for you:
01.Buy a 256m or 512m card.
11.Add 12 byte header and flash using RUU.
10.Simply do not update
helloworld1 said:
No, NEVER TRY TO UPDATE IT WITH CARD MORE THAN 1GB!!
It will almost surely brick(not badly) your device that causes some unnecessary trouble. After that you can still flash again.
So there are 10(!) choices for you:
01.Buy a 256m or 512m card.
11.Add 12 byte header and flash using RUU.
10.Simply do not update
Click to expand...
Click to collapse
Too late! I used my 2gb card yesterday (after a clean FAT format) and it worked fine.
helloworld1 said:
What about 6.1:
Due to the reason that 6.1 haven't been official released, I do not have a strong will to make a unstable rom.
I will release a 6.1 rom if it is stable and no clean one have released.
Click to expand...
Click to collapse
ok
i'll wait ur 6.1 rom. thanks so much
Windows Mobile 6.1 Professional AKU 1.0.0
5.2.19199 Build 19199.1.0.0 WWE (ENG)
v1g
Author:
- pArtizAn (Erofich)
Thanks to:
- Alex[DFR] - WM6.1 Pro XIP, a lot of useful info
- GreateVK - betatesting, advices, SmartPhone->PocketPC device id changing, rewritten keyboard driver
- Jony_aa - betatesting
What's included:
- NET Compact Framework v2.0
- xT9 Eng/Rus
- StarTrek settings applet
- Short Home button press to Win
- Long Home button press to OK/Close
- MS Office deleted
- Windows Live deleted
- Esmertec Jbed 3D java
Known issues:
- software keyboard required to write is some text fields
How to flash:
0) READ A README.DOC FILE located in RUU folder in the archive!!!
1) make an application unlock
1.5) make a SuperCID (optional)
2) copy content of SSPL folder to the root (\ folder) of your device
3) run SPL.lnk from the root (\ folder) of your device
4) run ROM Update Utility.exe (from RUU directory in the archive) on your PC
5) follow the instructions
6) wait until flash process will be completed
7) READ A README.DOC FILE located in RUU folder in the archive!!!
You can flash it over ANY (Qtek, Dopod or Cingular) rom!
Download:
https://disk.yandex.ru/d/NuX0TfNy3Przs
REUPLOADED in 2023
Erofich!
Looks amazing... Although the link is dead
Churchill said:
Erofich!
Looks amazing... Although the link is dead
Click to expand...
Click to collapse
link fixed
OK I downloaded it via the russian Forum...
It is mentioned that some fields need onscreen keyboard... Do you need it in messaging?
And how fast is the device with the PRO version??
link is dead again
It's WM61ProV1g.7z, not WM61Prov1g.7z.
Anyway, it's finally here, cant wait to flash it. Totally awesome.
I was waiting for this but I cannot flash right now. Can't wait to find time for flash and test.
Thanks a lot Erofich, you are the best!
Thank You!
It's already running on my Qtek 8500! At moment I've done only my first phone call with new OS
Thank You!!
im backing up my phone now and i will be joining the WM6.1 PRO community soon! ETA 90min. thanks Erofich!
backup done! preparing to flash... fingers crossed..
Beautiful ROM
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Really nice ROM
I like it a lot. Everything with Active Sync seems to be working great. Great work. I would like to donate something via paypal. is this possible.
woobieman75 said:
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Click to expand...
Click to collapse
i think you can change the language in regional settings. im not 100% sure, my phone is still backing up. cant wait to try it.
woobieman75 said:
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Click to expand...
Click to collapse
Change it to yours in regional settings
most likely, you only need to change it in settings-system-regional settings
Update on Russian Language
Update: Sorry it was be default in Russian. I just set it to English.
Why should somebody change from standard WM 6.1 to WM 6.1 Pro? - The Pro Version has not so much funktiones - as i see...
What are the advantages of the new version?
Thanks!
Bug(s) List
OK i finally flashed WM6.1 PRO to my startrek. so *****ing as always (sorry Erofich, i just want to help you guys iron out the bugs), here is the bugs list. (to be updated as frequently as needed, so please check back this post)
Bug List (updated 20th Mac 08)
=======================
1. Microphone AGC does not work. enabling will only get a white display with nothing (doesnt hang the device though). and when you check it again, it is still not enabled.
UPDATE : Will be removed in future version
2. When in fake cursor mode, if you leave the device there for a while and it does into standby, the device wakes up in a black dark screen, with only cursor working and the rest of the buttons disabled. cannot access anything too. (i have the owner information displayed on power up optoion checked)
UPDATE : According to Erofich, new cursor coming soon!
3. Camera software is not displaying properly. no menu can be seen, or message from the software cannot be seen. settings keys not working too.
UPDATE : Currently in development by Erofich
4. I noticed bluetooth light is flashing when device is switced on, however, when the OS is fully loaded, bluetooth is not ON. not really an issue, just an observation.
Suggestion(s)
==========
1. back key for smartphone to be enabled so we can map it to close/OK instead of having to hold home key. (will it affect phone dialing backspace? im not sure)
UPDATE : As suspected, nothing can be done here. Holding home key for OK/Close is a bit troublesome,but i guess we just have to sacrifice this for WM PRO
2. where can i download abode reader LE 2.00.261818 cab that i can choose installation path? can you please make a cab for this program?
Annoying Issues with using WM PRO without touchscreen ( Not the author's fault )
=============================================================
1. Old programs that are not designed with soft key feature is a really a PAIN. have to depend a lot on fake cursor. hopefully GreatVK will have a better solution for cursor.
UPDATE : Discovered an easier way of minimizing. double click on home key will minimize any running program.
P/S :All these testings and getting used to is giving me a headache.. will do further testings later. Great work Erofich and your team! By the way, you just appeared in engadget! http://www.engadget.com/2008/03/20/windows-mobile-6-1-professional-running-on-an-htc-startrek/
Witch Type of t9 i have to install? The default cab for smartphone doesen't work...
slavix said:
Witch Type of t9 i have to install? The default cab for smartphone doesen't work...
Click to expand...
Click to collapse
this is WM6.1 PRO, smartphone softwares wont work with it (not fully compatible)
alexnvidia said:
this is WM6.1 PRO, smartphone softwares wont work with it (not fully compatible)
Click to expand...
Click to collapse
Yes tes.. but i think the Xt9 for pocket pc works.. but witch pack of xt9? I try something... i try to change mssp2 and statdict.0409 and dictprob.0409 file to italian.. but i have no results! My girls write and write message.. I think i have to Keep his hands occupied with my one eyed snake.. hahahah!
Based on helloworld1's Jade ROM (LINK) I made an ROM with more of the HTC Jade software.
Since the HTC Jade had an bigger ROM memory than the HP iPAQ RW68xx i have made CAB files of the software to install ftom the SD card automatically, it is software witch is useful but not so hard needed. So after a hard reset orso you can use the device but you need te reinstall the rest of the software.
When you had tried the ROM by helloworld1 before you can see that it is just an Minilla 2D ROM but i wanted to go a step further so here it is...
The difference between the RW6815 and RW6828 download are not more than that the RW6815 use the HP camera app and have no radio software in the ROM and the RW6828 has the O2 camera app and radio software.
How to install?
1. Download the right ZIP for your phone.
2. unpack all the content of the ZIP (the nb0 file and the 2577 folder) to the root of an FAT32 formatted MiniSD card.
3. put the SD card in you RW68xx
4. press the two softkey buttons (the keys with the "-" symbol) and the reset buton, don't unpress before you see a white screen with the HP logo in the center
5. wait for 12 minutes.
6. now your phone is resetting to factory defaults and you can now do the things you will allways do with a Windows mobile phone like calibrate the screen...
7. the HTC autostart software will start and install some program shortcuts and other stuff and afterward it will reset the device. let the phone do its thing...
8. The last step is to start the autorun from the SD card to install the last pieces of software. It will start and install automatically and afterwards (about 4 minutes or so) you will be asked to reset the device, choose yes. You can underwhile reset your device and work with it. It will install in the backgroud (it is possible you think that the system feelf not so stable, the best is just to leave it)
9. Now you can use your device and use the advantage of the HTC software.
if you want to pre install some software of you own choice to the device add them to the INSTALL folder... See the subfoldernames and the items in that folders to see how it works (hint: the folders with the prefix "my" are installed silently)
Download
Version 02
HP RW6815 - 15M2D02 - [email protected]
HP RW6828 - 28M2D02 - [email protected]
Version 01
HP RW6815 - 15M2D01 - [email protected]
HP RW6828 - 28M2D01 - [email protected]
Just in case: My MediaFire directory
If you find any bugs or you have some ideas post them please.
ToDo list for next releases:
Code:
Make speakerphone button to work while calling
Remake the HP animated splash screen
Make camera and video link work in TouchFlo Photos and Videos tab
Change HTC opera splash screens to HP
Remove HP Photosmart (image viewer) (RW6815)
fix the file extensions for images and photos to HTC Album
a none realistic branwave (I think), make HTC camera app work for RW68xx
Bugs found:
Code:
for RW6815: zooming with camera causing strange screen.
playing video with the HTC Album software is not OK (press hang-up key to go back to the main screen)
Video rotation in HTC Album is wrong
Cannot chage backlight with the HTC Power program, use old Backlight software witch is present
Clear Storage (HTC software) doesn't work
Greetings,
Michel
P.S. You can donate me for the effort i put in this ROM via THIS link. If you donate you support me in making it a better ROM.
placeholder...
placeholder number 2...
Version 2 is almost uploaded (RW6815 is finnished, RW6828 is uploading and you can find him later on in my MediaFire folder or tomorrow with an direct link in the start post).
changes:
changed some of the HTC logo's for HP logo's (the splash screen is a new old style HP animated logo)
added some extra OEM packages of the HTC JADE
removed the HTC keyboard from the ROM and repacked it in a CAB
did a remake of the autorun for the CAB and REG files. You can now reset your device while the software is installing, it will go further where it was ended.
Some small cosmetic things (Youtube shortcut was not working on the programs tab on TouchFlo)
thanks alot i started to use.seems everything ok.looking very good mate good job
when got any notification touch flo is disabled.it auto launchs or says tap here to launch.
devilunix said:
when got any notification touch flo is disabled.it auto launchs or says tap here to launch.
Click to expand...
Click to collapse
The RW68xx is sometimes a bit low at RAM so the HTC software stops Manilla so u can use other software without problem. I don't think there is any solution for
thanks anyway ill try also version 1
Thanks for this rom, downloading now. been trying some other roms but i've got camera problem hope this will work.
thanksssssssssssssssssssssssssssssssssssssssssssss sssssssssss
thankssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Is there a way to root this rom without using miniSD card??
Rom OK but WiFi not working
I have flashed thi rom on my HP 6815, and looks great, but WiFi does not work.
launching HP asset manager The Wireless LAN section reports:
Driver REV: N/A
Firmware Ver: N/A
Hardware Rev: 1.0
IP Address: N/A
Mac Address: N/A
Radio present. Yes
I belive there is something wrong in the wifi radio firmware (different hardware revision?)
Please help me
Thank you
I copy all the files to root of my SD card... But when i reset my rw6815 to that hp logo in the middle, it passes about 5-6 minutes then my HP just resets it self but no ROM rooted to it just that ougly WM5.0
kemoba said:
I copy all the files to root of my SD card... But when i reset my rw6815 to that hp logo in the middle, it passes about 5-6 minutes then my HP just resets it self but no ROM rooted to it just that ougly WM5.0
Click to expand...
Click to collapse
i am truing manu rooms , but result is always the same
Phone is off , on settings have mesage : ¨wireless radio must be attached to use the phone ¨
Please help !
Thanks in advance
Brief Introduction
Code:
As what I've promised before, it's right here. Please report for any existed
bugs.
For guys who think that the automatically running ActiveSync is a bug, you can
use the "patch" attached - but I myself don't think that it is.
ROM Information
MWG Atom Life WM6.1 ROM WWE_080410_B2_DS
OS Core: CE OS 5.2.21057 (Build 21057.1.6.10)
Pagepool Size: 6 MB
OEM Softwares Removed
Aplix Jblend
Quanta Image Editor
Quanta Media Album
Quanta Setup Wizard
Visual On Streaming Media Player
Westtek ClearVue PDF Viewer
OEM Softwares Implantated
All the MWG OEM softwares (Except those listed above)
Adobe Flash Lite 3.1 (IEActiveX version: 9.1.122.270)
Adobe Reader LE 2.5.1.0.404840.06
Arcsoft MMS Version 5.2.2.66
Cyberon Voice Speed Dial Version 1.2 Build 100303
Esmertec Jbed 20090506.2.1
HTC Boot Launcher Version 1.0.1915.2530.2
LockStream Version 1.2.20100721
Microsoft .NET Compact Framework Version 3.5.9198.0
Microsoft Internet Explorer Mobile Version 7.11
Microsoft Office Mobile Version 6.1
Microsoft SQL Server Compact 3.5.5692.0
Microsoft Windows Live for Windows Mobile Version 10.7.0059.0600.1000
Microsoft Windows Media Player 10 Mobile for Pocket PC Version 10.3 Build 21057
Visual On Streaming Source Filter Version 2.7.2014.1626.00
Downloads
MWG Atom Life WM6.1 ROM WWE_080410_B2_DS (52.54 MB)
Try it first..........
Could U give a screenshot ? And how many Free RAM with this ROM ?
( The 1st tester Lol......... )
Abhy-Boy said:
Could U give a screenshot ? And how many Free RAM with this ROM ?
( The 1st tester Lol......... )
Click to expand...
Click to collapse
Sorry, I can't. I've applied a lot of changes in settings and installed a couple of softwares into my device already...
But it is MWG-like. It can be regarded as an official update from MWG.
You're really the first one!
About the free RAM at startup... I can get over than 24,000 KB at the moment(I had installed a lot softwares). I didn't apply any changes to the cache of file system, which means the cache size is still 2 MB as default.
It's as much as you can get in the latest official WM6 ROM, right?
aa125690 said:
About the free RAM at startup... I can get over than 24,000 KB at the moment(I had installed a lot softwares). I didn't apply any changes to the cache of file system, which means the cache size is still 2 MB as default.
It's as much as you can get in the latest official WM6 ROM, right?
Click to expand...
Click to collapse
I hope Your new ROM can give more Free RAM. Your Build 21056 only give me about 13Mb Free RAM after install all application that I need. So hard download from Mediafire Lol..................
Have finished download, and now I'm using your ROM and add all Apllication ( and games too ) that I need. About 14,55 Mb Free of RAM and only have 651,71 Mb Free of Storage. Cool..............
Downloaded!!!!
how to install this .DIO file
Shoaib.Khan said:
Downloaded!!!!
how to install this .DIO file
Click to expand...
Click to collapse
Like Bajok! says :
HOW TO FLASH THE ROM:
1. You must have at least 70% battery.
2. Use mini-SD card and format it to FAT16 (use only 2GB capacity and below, don't use SDHC card!)
3. Copy AL1.DIO to card.
4. Insert card to memory slot of your device. Press and hold record button (beside the camera button) then push reset button with your stylus. Wait until BOOTLOADER mode appears saying "SD CARD DETECTED", release the record button.
5. Wait 'til it finishes until the O2 logo and splash screen appear. Follow the on screen steps. HAPPY FLASHING!!!
Thanks your ROM is very light, fast and battery usage is very good with this..
I surprised!! solved my problem for years on battery usage problems.
Just had to say thanks, sadly last week my old faithful HTC TYTN died, and i almost cried, and i had to get another PDA.
The one i got was an 02 Atom Life, however the stock rom wouldnt run some of the apps i use and depend apon, and couldnt do some basic stuff like send the USSD to get credit info (*100#), so i tried the official 6.1 update which still didnt run my app, or allow me access to my info, then i tried this Rom.
Everything goes again, (including USSD) ive tried your 6.5's but frankly I prefer this one alot much more, I just wanted you to know I appreciate your effort to the community.
The problem i have it they layout for the 6.5, do you have a 6.5 with the 6.1 Setup? If so i would gladly test it for you.
Regards
Andrew (New Zealand)
sastyh said:
Just had to say thanks, sadly last week my old faithful HTC TYTN died, and i almost cried, and i had to get another PDA.
The one i got was an 02 Atom Life, however the stock rom wouldnt run some of the apps i use and depend apon, and couldnt do some basic stuff like send the USSD to get credit info (*100#), so i tried the official 6.1 update which still didnt run my app, or allow me access to my info, then i tried this Rom.
Everything goes again, (including USSD) ive tried your 6.5's but frankly I prefer this one alot much more, I just wanted you to know I appreciate your effort to the community.
The problem i have it they layout for the 6.5, do you have a 6.5 with the 6.1 Setup? If so i would gladly test it for you.
Regards
Andrew (New Zealand)
Click to expand...
Click to collapse
I'm sorry, but I couldn't understand your last question... I beg your pardon?
Sorry, ill phrase it better,
with your WM6.5 roms i noticed they didnt have the standard start menu, like the WM5.0 / WM6.1, it instead your WM 6.5 has the touchflo type menu.
Is it possible to make a 6.5 rom without the touchflo ?
or can the touchflo be turned off so the old start menu works?
sastyh said:
Sorry, ill phrase it better,
with your WM6.5 roms i noticed they didnt have the standard start menu, like the WM5.0 / WM6.1, it instead your WM 6.5 has the touchflo type menu.
Is it possible to make a 6.5 rom without the touchflo ?
or can the touchflo be turned off so the old start menu works?
Click to expand...
Click to collapse
Yes... There're two ways that you could be able to use WM6.1-styled Start Menu, but both are not perfect neither:
1. Use the QuickMenu instead.
2. Recook a WM6.5 with a hexed shell32.exe file(by Sun_Dream in DFT) and other WM6.1 DPI and Lang *.dll files. I have just cooked one and that was under tweaked, but unfortunately my device broke again in the day before yesterday... So I'm afraid that you may have to cook it yourself.
My device is fixed now. I've got the thing you meant done, but themes of WM6.5 or later are not applicable for this ROM. The WM6.5 lockscreen and Titanium are not present as well...
So does anyone want to try that?
hi aa125690, been almost a year but this rom is fine!
I have a problem here =
1. when i flash the rom back to MWG original rom (.exe) through dsuu I can't find "wireless tab" under setting-connection-wifi.
2. same thing happen using original O2 wm5 or wm6 rom. no wireless tab inside.
I thought this was DSUU problem so I did =
3. using modified flash.dio as al1.dio from both original O2 rom (miniSD mode) resulting the same.
4. using modified flash.dio as al1.dio from original mwg rom (miniSD mode) resulting the same.
many hard-resets but they solve nothing. strange thing is = all rom from this xda-developer site (from you, bajok!, chrisch, etc, which are all minisd mode) are free from this problem. do you have any idea?
I just wanted to feel the "old feeling" when the atomlife was still on wm5 just like old time.