Related
This program is for those of you looking for HTC Cube program which -
1) Runs on O2 ATOM
2) Which works fully without using FlashLite or FlashPlayer
3) Which is low in memory requirement and does not increase battery consumption.
4) Has a Contact page on cube that is fully working and integrates with HTC Home plugin
5) Which is tested on ATOM and is considered relatively 'stable' code
THIS IS ONLY TESTED ON O2 ATOM
NOTE: All other PDAs can try but please test it at your own risk and feedback if it works for you.
HTC Touch Cube working on O2 ATOM(WM6 AKU0.7.0)!
================================================================================
LATEST UPDATE - NOV 18th 2007
+++++++++++++
Touchflo Alpha 2
+++++++++++++
PRE-REQUISITE: This program needs HTC Home Plugin, HTC Music Plugin, and HTC AudioManager to be fully integrated.
The latest Alpha 2 cab file is downloadable now!
(See one of the attachments here labelled - Touchflo alpha 2.zip)
Instructions
1) Install this cab file
2) Delete APL, Biotouch, and HUB from the /Windows/Startup first to avoid black screen problem.
3) Soft-reset
Features in this cab file -
1) Finger activation of cube
2) Efrost's 'activation icon' at the top bar is no longer visible.
3) All efrost's finger scrolling features available and functioning.
FOOTNOTE:
1) You must uninstall the old version of this cab first. Then soft-reset before installing this one.
2) This cab does not include Touch Settings - for this feature, you can still download the Touch Settings V1.22.cab attached below.
3) You can ignore all the other archive information below to avoid confusing yourself!
4) You can ask for help in this thread but don't expect me to help you troubleshoot unless you're using an O2 ATOM!
5) Please share your ideas and findings here on how to improve it further.
=====================================================================================
TO GET FULL CONTROL MOVEMENT OF CUBE
THIS CUBE WILL NOT BE COMPLETE WITHOUT MENTIONING THE BREAKTHROUGH THAT KONA MADE FOR THE HTC CUBE ON NON-TOUCH DEVICES LIKE THE O2 ATOM. THANKS KONA AND GANG FOR DOING THIS!
To learn more, visit Kona's thread here: http://forum.xda-developers.com/showthread.php?t=343583.
NOTE: Kindly donate(any amount, no matter how small) to these WONDERFUL DEVELOPERS who solve so many problems for us in O2 ATOM!!!
=====================================================================================
ARCHIVE INFO - from previous postings.
Hi guys,
I've managed to get the HTC Touch Cube working with jiggs's WM6 AKU 0.7.0. Not sure if anyone was previously successful in doing this. But unfortunately, at the moment, it is using the ButtonFlo method of turning the cube.
I dont have the expertise to get this thing working using the Finger or stylus to get the touchscreen to turn the cube yet.
Maybe one of you geniuses out there will be able to take this one step further and get it working fully! (I'm hoping)
To get the HTC Cube working with finger touch-screen capability (using eFrost's FTouchFlo) - just follow the steps in post #150 - http://forum.xda-developers.com/showpost.php?p=1598731&postcount=150
The files needed for this installation is also located in this post.
============================
ALTERNATIVE INSTALLATION METHOD
============================
ALTERNATIVELY, if you want to configure using the long-way; and using the attachments below, please follow the steps listed here:-
INSTALLATION STEPS -
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
PART 2 - Customizing Your Cube using Touch Settings!
Step 1: Install Touch settings V1.22.cab, then soft reset.
Step 2: Go to windows\startup and delete file called "Mediahubmini"
Step 3: Soft reset (I don't think it's neccesary though, but i do perform
this step.
Step 4: OH YES! Also install the missing ICON files for the APLauncher - AL_xx_Touch.zip into a separate directory (eg. \Touch).
Step 5: Copy the same ICON files(from Step4) into \Windows. (these files were missing in Part1).
Step6 - Soft-reset and you should see everything working!
CHECKLIST ON HOW TO AVOID BLACKSCREEN AFTER YOU INSTALL THIS APPS
1) Make sure that you have HTC Home, HTC Audio Mgr & Plugin installed and activated in Today settings.
2) Make sure you install all the missing AP_xx_Touch.zip ICON files.
3) If you have Touch Settings program installed -
a) Make sure you DELETE MediaHubMini.lnk from \Windows\Startup &
b) Start Touch Settings and click SAVE to save the settings once after missing icons are installed.
Once you have Steps 1-3 done properly, just do a SOFT-RESET and the cube should be working.
NOTE: Below is a photo of Touch Settings V1.22.
( and here's the official link from the author - http://ww2.fatattitude.com/software/software-item.aspx?appid=10 )
If you're happy with his work, you can buy him a beer - http://www.fatattitude.com/buybeer)
Additional info available here - http://forum.xda-developers.com/showthread.php?t=324556
(Pls note that this is still in Alpha testing stage so install at your own risk)
ADDENDUM - (POSTED on OCT 16, 2007)
TOUCHSCREEN ACTIVATION FOR TOUCH CUBE
Thanks to efrost's FTouchFlo (Alpha 3 version) with application launcher function, I can now use my finger to 'activate' the cube without using button!
For efrost's program FTouchFlo, please refer to his posting and donate if you're happy with his contribution! Here's the link - http://forum.xda-developers.com/showthread.php?t=334965
Pre-requisite - you MUST have a working Touch Cube on yr ATOM.
Step 1 - Install efrost's FTouchFlo ( and follow his instructions to calibrate and then try making sure u can scroll).
Step 2 - Replace the default FTouchflo config file under /Program Files/FTouchFlo_a3/FTouchFloConfig.txt with the one I've posted here.
Step 3 - Restart FTouchFlo - under Programs, select Start FTouchFlo and then u try to test the scrolling.
Step 4 - You're ready to test the activation -
a) You must first put Ftouchflo into launcher mode (IMPORTANT STEP) - swipe your finger from down-to-up-and-down again in one swift motion. (you will hear a *beep* on your PDA to let you know that you've toggled into launcher mode.
b) Just swipe your finger from LEFT to RIGHT and then it will automatically launch the cube on your screen!
Step 5 - Once the cube is on yr screen, you can then continue to swipe from LEFT to RIGHT and be able to turn the cube.
TO ENSURE RESPONSIVENESS IN YOUR DEVICE
To ensure responsiveness in your device, do not specify too many applications to launch using gestures - I've modified FTouchFloConfig.txt to only launch the cube.
The touchscreen functionality for this Touch cube will improve as efrost improves his program!
Thanks efrost!
(Pls note that this is still in Alpha testing stage so install at your own risk)
NOTE: NO OFFICIAL SUPPORT IS PROVIDED FOR ANY OF THESE SOFTWARE POSTED HERE!
That good news if it can work. Will try it out when i'm free.
http://forum.xda-developers.com/showthread.php?t=333163
this is the one ur asking right? same touchflo? the author of that program is on that thread. He visited there & u may ask some question to him.
Hi mikewtw. May i know the installation steps?
wonder12 said:
Hi mikewtw. May i know the installation steps?
Click to expand...
Click to collapse
please try to read http://forum.xda-developers.com/showthread.php?t=328010 i never try to me also..
Installation steps I used to get Touch Cube working.
Here are the steps I used:-
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
Everything should work beautifully when you press the button for the old O2 Media Plus ( which has now been mapped to Touch Flo program).
Everything in the Touch Flo Cube should work.
And I believe there's also a Touch Flo Cube Customizer program available. I will try to repost it here if I find it working well.
I'm hoping someone will get the touchscreen interface working so that we can swipe and activate the cube using our fingers or stylus! Thats what I'm waiting for!
The ultimate "O2 Touch" is coming!
Mike
I will stick with my Iphone look O2 Atom, much cooler must say
Phone goes missing / Touch Settings V1.22 not working on this Touch Cube yet.
PROBLEM #1
I notice that my Phone button is missing from the HTC Home Plugin after I installed this Touch Cube. So instead of 6 buttons on the Home Plugin, I'm only left with 5 button!
Luckily the Touch Cube (using buttonflo) works and I can put my 9 favorite contacts in the contact page on the cube
When I reinstall Home Plugin again and reset, the 6buttons comes back, but my Touch Cube blanks out Then when I reinstall Touch Cube again, my Home Plugin is missing the Phone button...Oh well...
PROBLEM#2
Also, when I install Touch Settings V1.22, my Touch Cube blanks out when I try to launch it.
Tried installing Touch Settings before Touch Cube and vice-versa, but that didnt help either
If anyone can get Touch Settings V1.22 working with this Touch Cube, please post your files and installation instructions. THanks.
this touchflo is still on demo version, alot of programs have conflict here.
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Ultimate Chicken said:
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Click to expand...
Click to collapse
You must have HTC Audio Mgr and HTC Audio Mgr Plugin installed and also HTC Home Plugin running first.
Then install Touch Flo(alpha).cab and lastly the JTButtonFlo.cab file. Map a O2 Atom button to Touch Flo and then do a soft-reset.
After that, it should work.
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Ultimate Chicken said:
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Click to expand...
Click to collapse
the CREATOR IF THIS program is BYKA.. he is on this thread
Try this in your ATOM..Touchflo...
http://forum.xda-developers.com/showthread.php?t=333163
Byka's Cool Touchflo 3D Cube
http://forum.xda-developers.com/showthread.php?t=328010
try to ask question on that thread..
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Ultimate Chicken said:
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Click to expand...
Click to collapse
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
gives black screen , will wait for touchflo rom ,if it is possible
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
Click to expand...
Click to collapse
I can't, because it blackscreens my device. <.<
I'll try again when I get home, tho, but don't expect a miracle. This needs to be worked on.
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Exellent
jiggs said:
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Click to expand...
Click to collapse
I can smell TouchFlo on our MightY AtoM soon
GO HERE
NOT FOR ATOM EXEC NOR HP6800 SERIES.
First of all this ROM is basically an extension over JIGGS AKU 0.7A ROM ..
Thanks to Jiggs (Thanks Mate!), abusalza for his kitchen and all the other community members
This new ROM is much faster than the old one thanks to some more tweaks and newer versions..
The Rom is 6MB PAGEPOOL.... and includes the following.. :-
1. HTC DIALER
2. Total Commander
4. HTC communication manager
5. HTC Action Screen
6. Network wizard
7. WM5torage 1.78
8. HTC keypad , HTC Keyboard(with T9 Input )
9. HTC CUBE , works AGAIN this time FASTER , MORE RESPONSIVE and as before the Installation is SEMI-AUTOMATIC..(Senses left-right movement ,Very similar to the real HTC TOUCH) Thanks to Kona_Mtbkr
11.HTC Audio Manager and the Plugin..
12.FINGER SCROLL CONTACTS , comes pre configured with default softkey etc..(icontacts )
13.Many other Misc. add-ons also included
14.X-Button
15.HTC calculator
16.HTC Windows Media Player SKIN
Removed
1.Photo Editor
The free RAM is about - 20 -22 MB(with cube ,and HTC HOME running)
Free Storage :- 35 Mb.
Known Bugs:-
1.Extended ROM does not get unlocked(looking for a solution)
2.A2DP problems
3.Disabling Or Enabling Home Plugins Requires Soft Boot now..
RAPIDSHARE
4SHARED
INSTALLATION
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Run the executable DSUU.EXE
4. Follow on-screen procedure
After installation is complete , on the first boot you will be asked to install programs , please dont skip any one of them as this may result in malfunction .. , and also install 1 ,2 ,3 ,4 ,5 ,6 ,7 .cab files on your phone memory when prompted ..
IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..(sry forgot to edit..)
PLEASE DONT SKIP ANY INSTALLATION..
After all the programs are installed and you have rebooted once ..
Go to Programs MENU and open SIM MANAGER ,copy all your contacts to phone memory .
NOW REBOOT AGAIN..
You might notice bit slowness during first few startup but dont worry ...it will only be for a few seconds after which everything works smoothly..
After this you are all set to go , the left softkey opens up Action Manager which gives you quick access to new messages etc.. , the right key opens up the new contacts application .
A DOWN TO UP MOVEMENT ON THE SCREEN WOULD RESULT IN OPENING OF THE CUBE.
WHEN THE CUBE IS OPENED YOU CAN CLOSE IT BY SNIPPING YOUR FINGER UP TO DOWN.
FURTHER NOTES :-
1. I have also included Flash Video Bundle in an seperate folder when you UNRAR the rom ... you can install it along with TCPMP player(also included.) to view sites like Youtube etc..
2. In the Previous ROM Slide to Unlock was included by default ,this time i have included it as an optional .cab setup so incase you are interested you can simply install it , Note - You don't need to change the skin as thats all preconfigured in a custom CAB
So i am now uploading and the link will be up soon also , will be posting some screenshots..
Special Note:
This is NOT an OFFICIAL ROM. You can not expect support from O2 by bringing in your device with this ROM. Neither should you contact them for support on this ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
Side Note: This will not SIM unlock or change your mobile serial no. (IMEI) in any way. You can flash back to original ROM anytime! Do not attempt to flash this on ATOM EXEC! If you get COUNTRY ID ERROR, you did not follow steps above. Do NOT restore from spb / sprite full backup, this will overwrite system files and make your device unstable; worse, unusable.
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
I am currently using, jiggs rom 0.7a. and i'd like to give a try on yours but where can i get that mate? Cpacubo...
Rapidshare mirror is up now..mate..
Please READ THE INSTALLATION INSTRUCTIONS CAREFULLY
MMS problem solved?
Does this ROM solve the MMS problem on the previous version?
In the previous version of this ROM, I am having problems receiving MMS even after I do Auto COnfiguration and a Soft-Reset. I did not have this problem when I was on JIGG's AKU070.
I can't really say...but i think it should..man coz nothing at all related to MMS has been touched from the AKU.7A ..so i guess it will..
Sorry i can not check as i dont hv MMS activated..
hi too all
Great work
Hope in this one UNknown contact problam has been sort out.
good rom.
but i have a few questions.
1. is it compatible with atom life?
2. after updating to this rom. can i still use the wisbar to make my phone look like an iphone?
3. does this rom include touchflo already?
4. if i am on the "iphone" theme of wisbar, can i still use touchflo?
thanks!
@t3dong
1.NO
2.Yes
3.Yes
4.-Dont Know-
Thanks , this one works very well..
Ok, thanks a alot. I've downloaded it and will soon reflash my atom with this one... Can't wait to see the cube on mine..
Remember to read instructions carefully, sorry for repeating again but this is very important..
...IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..
Thaks 4 quick replay mate. I will follow your instructions...
wow awesome! what a good-looking rom. i love it very much. You've done a great job mate... keep up the good work. so far there's no problem with this rom. the cube turn nicely to the left and right. the other htc application are good as well. Oh ya, one thing, after i install Audio Booster, the skin of audio manager return to blue not black anymore but it's functioning well. Once again thank you for giving a new look and life to black atom!
can't seem to make the cube work...also the icontacts show nothing...am I missing something?
Yes , you are ..did you care to read the instructions..........please read them
Icontacts works after you have copied all contacts to phone memory..
As for the cube i would suggest you to read the instructions carefully , install all application..in phone memory..
No need to reflash just to a HARD-BOOT(Power +RESET) and follow instructions..
Hope it works this time
Yeah I read them very much..before running the ROM anyway, I did try to do Hard Reset to redo the installation of the cab files but it always hangs up after the 4.cab installation...I'm doing a reflash of the ROM from bootloader to try..
Thanks responding..will let you know
I reflashed...I don't get it...I get the Quick Launch Soft Key on the left but as per instruction it supposed to be the Action Manager
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
cool!
now u become rom creater. hehe. power!!! must pass down ur skill to me.
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
yup..a few times..also I noticed it hangs so much..it only responds to up and down movements..not the left and to the right...
WARNING: ROM Updating is NOT without risks. Please read the instructions carefully!
Preclude:
I haven't expected my ROMs will still frerquently updated today. I want to thank all of you who help me. You can donate me if you like my rom. Even $0.02 will satisfy me and encourage me to further support the rom.
Acknowledge:
Bepe for great tools. wuqiyu007 for porting XIP part. Garmin for great tutorials. abusalza for useful reference ROM. Homer285 for useful reference ROM. l3v5y's for great oem packages.
All people who help me testing this rom especially hochengsoon, kusanagi, slys3171989 and edywanwan.
ogel2, Tabbe and ronalddo for testing the atom rom.
Special Thank to BesFen, he helps me making an Manila 2D enabled new ROM and give me many good suggestions.
Rom Selection Guide:
There are so many ROMs on my thread that the new comers can hardly find which one fit their needs. This section will describe each ROM concisely and state my suggestion.
->If you want a stable ROM with Chinese support:
The main series of "clean and stable" ROM will fit you best. This ROM is also well supported by me and the stability is evaluated by time. I recommend you the b221 ROM.
->If you want to try something new and bleeding edge versions
The WP 6.5 series ROM fit you best.
->If you want to try Manila 2D enabled ROM:
There are 2 versions: Jade version and Besfen version. I do not support the Jade version very well due to time limitation. Besfen version is newer and supported by him. I think you can try Besfen's version first.
->If you want to make your own customization:
Try my kitchen. It is supported by me and you can ask questions about it.
->If you want ROMs of other languages:
There are CHS, CHT, GER versions.But they are unsupported and a little old. The stability is OK.
->If you want Atom ROM:
THere are Atom-R2 Rom here. But it is not supported. You can try it.
HP6828 Clean and Stable WM6.1 WWE rom:
The rom have Jade's kernel and kaiser's system as the base. The pagepool is 6M for stability as well as performance.
If you want to know what is good about Windows Mobile 6.1 comparing to 6.0, you can read this small PDF file: http://www.mediafire.com/?xdlgomziwtq
HP 6828 Clean and Stable WWE ROM:
Features of this rom :
1. Almost the same as the MS's Emulator's stable ROM.
2. Add some of O2 and HP's OEM apps like camera and wireless manager.
3. The HP's driver mixed with other enhancement.
Known bugs of this rom :
1. The Bluetooth PAN is not working at all. I include Bluetooth DUN support as a workaround.
2. In a very very rare case wi-fi will be on after reset.
3. Battery life is slightly shorter but better performance. A patch is needed to get longer battery life. (Download patch from the second thread or use Schap's Advanced Configuration tool).
4. The sound volume is a little low. SRS WOW HD will increase the volume dramatically.
5. The Bluetooth A2DP auto connection is working but one need to turn the device's BT on first then headset's or it will not work.
6. MMS program can not capture pictures and video.
7. Ipaq audio's headset ability will be disabled when powered off then on. Click on the slide will activate it.
8. Can not copy SMS to SIM card.(Thanks whtwww for notifying me the bug)
9. The screen may shift after flashing the ROM. Workaround: Do a soft reset on the welcome screen and then recalibrate the screen.
10. Bluetooth problem in WM 6.5 ROMs.
Update 20: 20081012,b189
1. SYS: Brand new 19971 system bringing many new changes from M$'s newer stable system. Visible changes are "close icon", "alarm setting", "menu font size". There are also many internal changes.
2. SYS: Memory management imporved.
3. OEM: Bluetooth BPP removed. As it consume memory and ROM space but not useful.
Update 21: 20081028,b196
1. SYS: Re-porting the 19971 XIP. It will be more stable. The shifted screen problem seems to be fixed. Memory will go down slower overtime. (This is a minor update without registry. You can restore backup from previous update)
2. OEM: Remove "Activesync mode". It is the same as settings->Connections->USB to PC
Update 22: 20081209,b199
1. SYS: Fix some VGA->QVGA problem in last release.
2. OEM: Add bluetooth security.
Update 23: 20090129,b229
1. Archsoft MMS update to latest version
2. Internet Explorer Mobile 6
3. Adobe Flash Lite 3.1 that is compatible with flash 8 and 9.
4. Microsoft Touch. You can touch and scroll now!
5. Windows Live updated to the latest version.
6. Fix Button Lock Issue
Update 24: 20090517,b294
1. Initial release based on WP 6.5
Note: The bluetooth is not working very well. Some previously added OEMs has been deleted due to ROM space problem.
Update 25: 20090519,b299
1. Fix some module addressing problems.
2. Fix the sound problem after disconnecting bluetooth A2DP device.
3. Windows Widget is left out in update 24, now it returns.
4. Fix the ringtone mode setting problem. It will now save the user settings on ringtone and vibrate.
Update 26: 20090528,b307
1. Fix the system sound problem after making bluetooth headset phone call.
2. Fix some more module addressing problems. (Some software compatibility)
Update 27: 20090605,b317
1. Rebase on the M$'s official emulator release.
2. Now windows live is working.
3. Now widget is linked correctly, try: http://rapidshare.com/files/240982956/Money.widget and http://rapidshare.com/files/240982612/Weather.widget
Update 28: 20090610,b318
1. Stability Fix.
Update F: 20091012,b-f
1. Rebase on M$'s new official system.
2. Release with full set of kitchen including the XIP porting tools.
Update 30: 20100218,b337
1. Rebase on M$'s new official 6.5.3 release.
Other ROMS:
HP 6828 Simplified Chinese ROM Special Release
1. Based on b92 of WWE Rom with fixes and VoIP support. All OEM are Simplified Chinese.
HP 6828 Traditional Chinese ROM Release 2
1. Include .NET Framework 3.5
2. Notification sound fix.
3. Camera importing function fixed.
HP 6828 German ROM Release 1
1. Initial Release based on b137 of WWE Rom. Some OEM apps are still English.
Atom(WWE) release 1 ROM
1. initial atom release based on b95 rom of HP's.
Atom(WWE) release 2 ROM
Based on 6828's B156.
20270 Kernel!
Some HP Apps replaced with atom's.
6815 Camera Patched ROM
The camera works. But the picture is upside-down.
Jade version.
I add a "secret" before just want to suprise you.
This ROM conatains many resourses from HTC Jade aka HTC Touch 3G.
It tries to resemble the HTC Jade in 6828.
It is pure WWE ROM, and your location in reginal setting does not have your location, please ask me for a more complete wince.nls.
It also does not have Microsoft Yahei font and the Windows Live.
The changelog are long but most things are coming from HTC Jade.
Besfen's Effort to Add Manila 2D to WM6.14 ROM Update to B229:
Thanks Besfen to enhance the Manila 2D experience in my ROM.
Manila 2D in B221 Hellowordl1's ROM:
1. Change HTC album to previous version, this fix HTC Album bug on Jade Secreet ROM (take from M2D thread).
2. Fix Power/battery indicator in Setting System.
3. Registry tweak, change the Task Manager Low memory of auto close app from 9MB to 3MB, so any app don't frequent close.
4. Registry tweak, add M2D ass exclusive app in Task Manager, make M2D not frequent close.
5. Change Internet Widget plugin to Internet Explorer.
6. Change Internet Widget’s default Web Site to…of course this 1st page thread…ha…ha…ha…
Removed App in Original ROM:
1. Transcribber, I get more free memori and ROM space.
2. Adobe Flash.
Note:
• Install Google Map to make Location Widget Work properly, you can download it from M2D forum.
• Install You Tube App, You Tube Plugin in Internet widget will work properly, you can download it from M2D forum.
B229 updates V3:
Based on clean ROM b229 and
* Fix WMP problem in previous release.
Download Link M2D B221
http://www.mediafire.com/download.php?ygd5libzymy
Download Link M2D B229 V3.1
http://www.mediafire.com/?ki0n2odnmel
Kitchen World:
The kitchen is a set of tool and files to rebuild and customize the ROM for convinence. I hope cookers enjoy these tools. I also released the non-supported 20273 system in hope of external force to stabilize it. Atom's kitchen is a little old. But it is still a good base to build atom's ROMs. Update f is essentially a new 6.5 kitchen. You can enjoy that more.
Donation
Thank you very much for those who has donated and supported me. You do not need to donate as 6828 is not exciting any more. You can show your thanks by following this thread.
Download:
HP 6828 WWE ROMs:
WM6.0:
20080119b29:http://www.mediafire.com/?7mnvog2nycl
20080216b30:http://www.mediafire.com/?0ymzgmgeeab
20080219b35:http://www.mediafire.com/?fho2xl3zi1k
20080305b36:http://www.mediafire.com/?cziyhxeywfz
20080309b39:http://www.mediafire.com/?ic2lz4nkvgo (Very Old recommended version)
20080314b45:http://www.mediafire.com/?mykgxdda51m
20080321b46:http://www.mediafire.com/?hxoemfu2whx
WM6.1:
20080405b85:http://www.mediafire.com/?mjlmvmmnjdb
20080407b92:http://www.mediafire.com/?bfz5yjoxmay
20080411b95:http://www.mediafire.com/?lljgzmmzzkg
20080514b99: http://www.mediafire.com/?1vxjdxgar2y
20080524b101: http://www.mediafire.com/?gxjy95tjmxd
20080614b105: http://www.mediafire.com/?ztzmtkqb3mx
20080614b110: http://www.mediafire.com/?i9xbfz9mrk4 (Old Recommended version)
WM6.1 new:
20080623b134: http://www.mediafire.com/?qojwjmtbtg1
20080624b135: http://www.mediafire.com/?bddhmlwo2hj
20080627b137: http://www.mediafire.com/?cbyijrmi2yu
20080701b142: http://www.mediafire.com/?y2xjxymfdx9
20080802b153: http://www.mediafire.com/?ge69olz7mli
20080806b155: http://www.mediafire.com/?ymf9y0lte9z
20080810b156: http://www.mediafire.com/?ltjczyzryxn
20080920b165: http://www.mediafire.com/?0xmzntky9tz (Recommended old version)
20081012b189: http://www.mediafire.com/?33a2dmo5eig
20081028b196: http://www.mediafire.com/?zmzzoozjmoj)
20081201b199: http://www.mediafire.com/?lo1erfd3g0o
20090107b229: http://www.mediafire.com/?xjihw4wmmoh (Recommended Stable release)
20090422b279: http://www.mediafire.com/?wdy32tngzd3
WM 6.5:
20090413b251: http://www.mediafire.com/?th1nticzj2d
20090517b294:http://www.mediafire.com/?rn2zmmz2jnt
20090519b299: http://www.mediafire.com/?uzqf2cmzlov
20090528b307: http://www.mediafire.com/?uzdmnw5zwmz
20090605b317: http://www.mediafire.com/?zjnjyhzelzj
20090610b318: http://rapidshare.com/files/243529642/6828-WM65-20090610-b318.tar.gz http://www.mediafire.com/?1521mnng3ru
20091012b-f http://www.mediafire.com/?bxlz1xo3fts
20100218b337: http://www.mediafire.com/?y2yiegmizb5
Other Roms:
6828 2D Manila Enabled Jade ROM: http://www.mediafire.com/?4m2ydgltdad
Chinese simplified WM 6.1 Clean ROM: http://www.mediafire.com/?hqtwjmygdlt
Chinese Traditional WM6.1 Clean ROM R2: http://www.mediafire.com/?mtnjs0t0gzn
German WM6.1 Clean ROM R1: http://www.mediafire.com/?xi4n20z4wlp
6815 camera patch may work version r2: http://www.mediafire.com/?lihy0vcvnxd
6815 camera patched version R3: http://www.mediafire.com/?2mjhtgjox0x
Atom release 1: http://www.mediafire.com/?xixrdywxnjy
EXTROM(Should be installed on Atom if you want Atom's ROM working properly):http://www.mediafire.com/?tjyzmvific9
Atom release 2: http://www.mediafire.com/?jxfm09sbces
(Thanks ogel2 for uploading)
Kitchens:
6828-kitchen: http://www.mediafire.com/?xmwm0lxtdxc
atom-kitchen: http://www.mediafire.com/?3z0gmzjmkzm
20273 system: http://www.mediafire.com/?5m0dbdf5271
How to flash using SD Card(Recommended):
Extract diskimg.nb0 to a sd card (<1G is better), insert it into 6828, press&hold 2 soft key(-) and reset. After a while, it will be in PBL mode, wait 15-20min, it will hard reset itself and flash done. The first boot time is very long so be patient , you may click the screen so that the device will not auto-off.
How to flash from PC with Windows XP (It is ok to run it in vmware)
Thanks Knave and rcperez for posting their detailed experience so I can write this section. Also thanks jimmyspa for improving the addheader's performance greatly.
1. Check your Boat loader version
(do a soft reset, and check the value printed at the bottom during the HP logo screen)
2. If you noticed that the last line states BL 1.00.05, it means you have boat loader 1.05 installed. You will need to download and flash your phone back to 1.01 via ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34053.exe (VERY DANGEROUS, FLASHING VIA SD IS MUCH SAFER!)
3. After successfully downgraded your phone's boatloader, or your version was already v1.01, you can proceed to flash your phone to the rom.
With the check done, proceed with the required files.
1. Go to download section to download the rom file.
2. Download the file pcupdate.zip attached in this thread and unzip the contents to the same folder you used in step 1.
3. Download the latest Rom file and extract to the same folder
4. Run BuffereAddHeader.bat. It will take seconds to generate a diskimage_Ver.nb0. (You should have Java Runtime > 1.50 installed, http://www.java.com/en/download/manual.jsp)
5. Move your phone to boatloader mode ( press the two - keys, follow by a poke at the soft reset hole with your stylus )
6. Connect the phone to the PC
7. Execute the Device Utility Update program and wait till it verifies the state. Click on Update Item "All" use cursor keys to change it to "OS ONLY" then hit next **** SELECT "OS ONLY", if you cant change it to "OS ONLY" DONT PROCEED!!! It should detect your device as Model 0 etc.
8. Press Next to begin flashing.
9. Once completed, the phone will reset by itself. Wait for a while for it to startup.
Here are the notes & files provided by hochengsoon with README for flashing via Windows XP
PC flashing using BL1.0.1 must be done from C:\Windows\Temp, so why not start everthing from this folder ie PCUpdate + ROM + missing file(s).
PCUpdate1.rar - http://www.mediafire.com/file/k5jumzzg1mm/PCUpdate1.rar
PCUpdate2.rar - http://www.mediafire.com/file/zqykwmteizz/PCUpdate2.rar
How to downgrade to WM5 using PC
1. download wm5 rom from http://h20000.www2.hp.com/bizsuppor...ng=8&taskId=135&swEnvOID=2067&hpappid=NextGen
2. run it and after entering the updating screen cancel it.
3. replace the hpRUU.exe in c:\IPAQ(default install) with the attached file hpRUU.exe in archive hpRUU.zip
4. Connect device to PC, then press and hold two "-" button and reset.
5. Run hpRUU.exe and do a normal update.
Note: you may delete eboot*.nbf to prevent bricking the device.
How to downgrade to WM5 using SD Card
1. Download this file: http://www.mediafire.com/?mbwxx9szmyz
2. Extract diskimg.nb0 to your sd card.
3. Enter bootloader mode by pressing two "-" keys.
4. Wait .
How to recover from semi-brick state:
1. Prepare a sd card with proper diskimg.nb0.
2. Pull out the batter for a few minutes.
3. Press and hold two "-" button and at the same time, put the battery in.
4. Wait a few second and release the button, then after a while, the device will be in bootloader mode.
How to use kitchens (NEW writen by besfen):
Req: .NET2.0+
1. Download Kitchen Tools and extract it.
2. If you have diskimg.nb0 file that you want to modified, copy it to the TOOLS directory and ROM directory.
3. In "cmd", "cd" to the TOOLS directory.
4. Run prepare_imgfs.exe diskimg.nb0, it will dump the .nb0 file.
5. Run viewimgfs.exe imgfs_raw_data.bin, it will make dump folder in the TOOlS directory.
6. Run pkgtools.exe, select the dump folder and build package, it will make 2 folder, SYS and OEM.
7. Sometime some files don't move to that folder, you can open missing.txt file to know where the location of that file, move the files to the location said in the missing.txt. Finally, there isn 't files in the dump folder, all file are in the SYS and OEM. Delete missing.txt and OS.bat in OEM folder. SYS is M$ related, OEM is oem added things.
8. Replace the original SYS and OEM folder in the kitchen with new extracted ones.
User can change the OEM at will except the OEMDriver folder. I have modified it many times to get it stable on new ROM.
To add a new OEM Software, you need:
1. Extract the cab file of the app, you can use wincab manager to do this.
2. Put the extracted files to the new folder in the OEM. The folder name don't contain space, you can use _ (underscore).
3. Type the registry in the one of .rgu file. There are many .rgu file there, you can edit it with notepad. if you finish save as, choose all file and unicode type, but don't change the name of that .rgu file.
4. Make a shortcut, open initflash.dat file with notepad, the location is in the OEM_lang folder, type the shortcut name. You can read the existing shortcut in that file to know how to do it. Remember to make the shortcut file first in the folder of each app.
After that, just run build.bat file in the kitchen directory, follow the instruction and your ROM already created in the FLASH FOLDER.
GOOD LUCK.
Useful apps for this rom:
http://www.mediafire.com/?sharekey=2c6d733c38f6ee1ed5a101cf914073b49519981328cd602c
Description:
addheader.jar: add 12 byte header and generate diskimage_Ver.nb0 from diakimg.nb0
hp_files.zip: Files for downgrading to wm5.
hpRUU_patched_from_language_and_model.rar: patch hp RUU.
BQ27200Expert: Battery Calibration software.
Good job !!!
Try upload to http://www.mediafire.com
I think many peoples need it
nhocbanme said:
Good job !!!
Try upload to http://www.mediafire.com
I think many peoples need it
Click to expand...
Click to collapse
Thanks for your advice, I have uploaded.
Hi,
May I know where's the link to download?
Thanks
dejazz said:
Hi,
May I know where's the link to download?
Thanks
Click to expand...
Click to collapse
Here:
http://www.mediafire.com/?7mnvog2nycl
As I had expected, there're few people want this rom. So I will stop uploading the updated versions.
wait a minute,i wan this rom..it is a nice but have you figure out how to solve the wifi flash light not on problem??i wan the update version of this rom.
but this flash rom abit troublesome,can u pls help to cut the 12bytes header n upload for us??
thanks~
hhhh3 said:
wait a minute,i wan this rom..it is a nice but have you figure out how to solve the wifi flash light not on problem??i wan the update version of this rom.
but this flash rom abit troublesome,can u pls help to cut the 12bytes header n upload for us??
thanks~
Click to expand...
Click to collapse
First, the wifi light is working on my 6828. The camera flash light do not work though.
Second, I have ALREADY cut the 12 byte header, so it is safe to flash using a SD card. I said that if you need to flash using RUU you need to ADD 12 BYTE.
Thanks for your interest in my rom.
helloworld1 said:
First, the wifi light is working on my 6828. The camera flash light do not work though.
Second, I have ALREADY cut the 12 byte header, so it is safe to flash using a SD card. I said that if you need to flash using RUU you need to ADD 12 BYTE.
Thanks for your interest in my rom.
Click to expand...
Click to collapse
cool,thanks for this nice rom
This is interesting. Can people report whether this is a stable ROM, other than the noted bugs?
Also, will it flash with a 2gb miniSD card? That's all I have.
Thanks.
i need a clean rom too, nhocbanme's rom is great but it's not clean. Dirty with HTC applications and full of black which i don't like.
i'm currently using this rom since a month ago, i think this is a stable and great rom. work flawlessly.
thanks helloworld1
i'm waiting for ur next update rom
Hellooow....helloworld1,
I ve flash this ROM today. It took about 15 minutes. Very good and clean ROM. Everything works perfect, Bluetooth stereo working nice, JAVA midlet also okay, camera works good with flash automatically light during photography. High memory after install 70 applications still got 42MB internal memory left. Hmmm....what else to comment...nothing , all perfect
When are you going to release WM6.1 with this type of super clean ROM....waiting....waiting
Keep up the good work!!!
I've splatted my 6815 with this ROM today, and thankfully it works a treat! It takes a while for its first boot but then I started to breath again when it came up.
The camera doesn't work at all though. The program loads but errors with "failed to get jpeg stream" or similar when clicking the cam's hw button. However that's a small sacrifice to pay when the pay off is WM6, that HP can't be bothered to provide.
Many thanks to helloworld1, and here's hoping you release WM6.1 in due course. \o/
ruffage said:
I've splatted my 6815 with this ROM today, and thankfully it works a treat! It takes a while for its first boot but then I started to breath again when it came up.
The camera doesn't work at all though. The program loads but errors with "failed to get jpeg stream" or similar when clicking the cam's hw button. However that's a small sacrifice to pay when the pay off is WM6, that HP can't be bothered to provide.
Many thanks to helloworld1, and here's hoping you release WM6.1 in due course. \o/
Click to expand...
Click to collapse
6815 may need a patch to get camera working. You may need to search around.
I do not have a 6815, so I will not embed it in this rom.
ehaezar said:
i'm currently using this rom since a month ago, i think this is a stable and great rom. work flawlessly.
thanks helloworld1
i'm waiting for ur next update rom
Click to expand...
Click to collapse
I haven't find any solution in the bugs in "bad section". So maybe I will not do minor update to this rom. Also, it will, maybe, save your time updating something worthless.
What about 6.1:
Due to the reason that 6.1 haven't been official released, I do not have a strong will to make a unstable rom.
I will release a 6.1 rom if it is stable and no clean one have released.
ruffage said:
This is interesting. Can people report whether this is a stable ROM, other than the noted bugs?
Also, will it flash with a 2gb miniSD card? That's all I have.
Thanks.
Click to expand...
Click to collapse
No, NEVER TRY TO UPDATE IT WITH CARD MORE THAN 1GB!!
It will almost surely brick(not badly) your device that causes some unnecessary trouble. After that you can still flash again.
So there are 10(!) choices for you:
01.Buy a 256m or 512m card.
11.Add 12 byte header and flash using RUU.
10.Simply do not update
helloworld1 said:
No, NEVER TRY TO UPDATE IT WITH CARD MORE THAN 1GB!!
It will almost surely brick(not badly) your device that causes some unnecessary trouble. After that you can still flash again.
So there are 10(!) choices for you:
01.Buy a 256m or 512m card.
11.Add 12 byte header and flash using RUU.
10.Simply do not update
Click to expand...
Click to collapse
Too late! I used my 2gb card yesterday (after a clean FAT format) and it worked fine.
helloworld1 said:
What about 6.1:
Due to the reason that 6.1 haven't been official released, I do not have a strong will to make a unstable rom.
I will release a 6.1 rom if it is stable and no clean one have released.
Click to expand...
Click to collapse
ok
i'll wait ur 6.1 rom. thanks so much
Windows Mobile 6.1 Professional AKU 1.0.0
5.2.19199 Build 19199.1.0.0 WWE (ENG)
v1g
Author:
- pArtizAn (Erofich)
Thanks to:
- Alex[DFR] - WM6.1 Pro XIP, a lot of useful info
- GreateVK - betatesting, advices, SmartPhone->PocketPC device id changing, rewritten keyboard driver
- Jony_aa - betatesting
What's included:
- NET Compact Framework v2.0
- xT9 Eng/Rus
- StarTrek settings applet
- Short Home button press to Win
- Long Home button press to OK/Close
- MS Office deleted
- Windows Live deleted
- Esmertec Jbed 3D java
Known issues:
- software keyboard required to write is some text fields
How to flash:
0) READ A README.DOC FILE located in RUU folder in the archive!!!
1) make an application unlock
1.5) make a SuperCID (optional)
2) copy content of SSPL folder to the root (\ folder) of your device
3) run SPL.lnk from the root (\ folder) of your device
4) run ROM Update Utility.exe (from RUU directory in the archive) on your PC
5) follow the instructions
6) wait until flash process will be completed
7) READ A README.DOC FILE located in RUU folder in the archive!!!
You can flash it over ANY (Qtek, Dopod or Cingular) rom!
Download:
https://disk.yandex.ru/d/NuX0TfNy3Przs
REUPLOADED in 2023
Erofich!
Looks amazing... Although the link is dead
Churchill said:
Erofich!
Looks amazing... Although the link is dead
Click to expand...
Click to collapse
link fixed
OK I downloaded it via the russian Forum...
It is mentioned that some fields need onscreen keyboard... Do you need it in messaging?
And how fast is the device with the PRO version??
link is dead again
It's WM61ProV1g.7z, not WM61Prov1g.7z.
Anyway, it's finally here, cant wait to flash it. Totally awesome.
I was waiting for this but I cannot flash right now. Can't wait to find time for flash and test.
Thanks a lot Erofich, you are the best!
Thank You!
It's already running on my Qtek 8500! At moment I've done only my first phone call with new OS
Thank You!!
im backing up my phone now and i will be joining the WM6.1 PRO community soon! ETA 90min. thanks Erofich!
backup done! preparing to flash... fingers crossed..
Beautiful ROM
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Really nice ROM
I like it a lot. Everything with Active Sync seems to be working great. Great work. I would like to donate something via paypal. is this possible.
woobieman75 said:
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Click to expand...
Click to collapse
i think you can change the language in regional settings. im not 100% sure, my phone is still backing up. cant wait to try it.
woobieman75 said:
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Click to expand...
Click to collapse
Change it to yours in regional settings
most likely, you only need to change it in settings-system-regional settings
Update on Russian Language
Update: Sorry it was be default in Russian. I just set it to English.
Why should somebody change from standard WM 6.1 to WM 6.1 Pro? - The Pro Version has not so much funktiones - as i see...
What are the advantages of the new version?
Thanks!
Bug(s) List
OK i finally flashed WM6.1 PRO to my startrek. so *****ing as always (sorry Erofich, i just want to help you guys iron out the bugs), here is the bugs list. (to be updated as frequently as needed, so please check back this post)
Bug List (updated 20th Mac 08)
=======================
1. Microphone AGC does not work. enabling will only get a white display with nothing (doesnt hang the device though). and when you check it again, it is still not enabled.
UPDATE : Will be removed in future version
2. When in fake cursor mode, if you leave the device there for a while and it does into standby, the device wakes up in a black dark screen, with only cursor working and the rest of the buttons disabled. cannot access anything too. (i have the owner information displayed on power up optoion checked)
UPDATE : According to Erofich, new cursor coming soon!
3. Camera software is not displaying properly. no menu can be seen, or message from the software cannot be seen. settings keys not working too.
UPDATE : Currently in development by Erofich
4. I noticed bluetooth light is flashing when device is switced on, however, when the OS is fully loaded, bluetooth is not ON. not really an issue, just an observation.
Suggestion(s)
==========
1. back key for smartphone to be enabled so we can map it to close/OK instead of having to hold home key. (will it affect phone dialing backspace? im not sure)
UPDATE : As suspected, nothing can be done here. Holding home key for OK/Close is a bit troublesome,but i guess we just have to sacrifice this for WM PRO
2. where can i download abode reader LE 2.00.261818 cab that i can choose installation path? can you please make a cab for this program?
Annoying Issues with using WM PRO without touchscreen ( Not the author's fault )
=============================================================
1. Old programs that are not designed with soft key feature is a really a PAIN. have to depend a lot on fake cursor. hopefully GreatVK will have a better solution for cursor.
UPDATE : Discovered an easier way of minimizing. double click on home key will minimize any running program.
P/S :All these testings and getting used to is giving me a headache.. will do further testings later. Great work Erofich and your team! By the way, you just appeared in engadget! http://www.engadget.com/2008/03/20/windows-mobile-6-1-professional-running-on-an-htc-startrek/
Witch Type of t9 i have to install? The default cab for smartphone doesen't work...
slavix said:
Witch Type of t9 i have to install? The default cab for smartphone doesen't work...
Click to expand...
Click to collapse
this is WM6.1 PRO, smartphone softwares wont work with it (not fully compatible)
alexnvidia said:
this is WM6.1 PRO, smartphone softwares wont work with it (not fully compatible)
Click to expand...
Click to collapse
Yes tes.. but i think the Xt9 for pocket pc works.. but witch pack of xt9? I try something... i try to change mssp2 and statdict.0409 and dictprob.0409 file to italian.. but i have no results! My girls write and write message.. I think i have to Keep his hands occupied with my one eyed snake.. hahahah!
READ THIS FIRST
Finally Working Bluetooth problem
For ATOM/ATOM PURE ONLY
Download link moved to post #2
Step by step upgrading
NOTE: These steps only apply if you have an ATOM/ATOM Pure.
Basically, there are three steps to flash a custom ROM to your ATOM.
1. Choose and download your choice of custom ROMs
2. Flash the custom ROM to your Atom using the Device Software Update Utility (DSSU)
3. Flash the custom ROM using MiniSD
Preparation
Backup your personal information using a program such as PIM Backup (freeware). Also make sure your phone has at least a 50% charge. You need M$ ActiveSync 4.5 for XP or Windows Mobile Device Center for VISTA and 7 to upgrade your device through PC.
Please read through this guide and download the all the necessary files beforehand. That way, you know exactly what you're getting into.
Choose and download your custom ROM
There are many, many custom ROMs out there for the Atom.
Look through the threads and find a ROM that you like. Custom ROMs differ in their preinstalled software, system settings, performance tweaks, and more.
ROMs usually come compressed in a .zip file. Extract the downloaded ROM file to somewhere on your hard drive temporarily in preparation for the next step.
Flash Custom ROM Using DSSU
Copy the custom ROM file (usually came with 6 files) to C:\WINDOWS\Temp folder you just extracted.
Once you've got everything hooked up correctly, run the Device Software Update Utility (DSSU).exe program inside of the C:\WINDOWS\Temp folder you just copied. Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
In case you can't update the ATOM in active mode, you may need to update by entering bootloader mode. Hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. Then connect your phone via USB cable to your computer.
Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
Flash Custom ROM Using MiniSD
*Not recommended
Here's the step how to flash your Atom using MiniSD.
1. Extract downloaded custom ROM to somewhere on your harddrive.
2. Cut first 12byte header of diskimage_Ver.nb0 using hex editor.
3. Rename diskimage_Ver.nb0 to diskimg.nb0
4. Rename ExtendedROM.img to extended.img
4. Copy both files diskimg.nb0 and extended.img to your miniSD
Now, hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. The Atom will flash the new ROM automaically. Once it done, setup the device and enjoy the new custom ROM.
Big thanks to HelloWorld, [email protected], Tj's and all atom tester...
WM6.5
Build 28205
Mediafire Clean-New UI 04/23/2010
Build 21895
Mediafire Clean 04/15/2010
Mediafire Neo Shadow 04/15/2010
Build 23016
Mediafire Clean 02/15/2010
Mediafire Neo Shadow (Bluetooth not Working) 02/12/2010
WM6.1 latest WM6.1 Core OS
Build 21056
Mediafire Clean 03/08/2010
4Shared Mirror, thanks to Vincentshjuan
Build 21054
Mediafire Clean 02/19/2010
Upgrade instruction:
Download and execute downloaded file, if something goes wrong, extract it and copy all files to C:\Windows\temp.
If you already running wm61 or wm65 go for OS+ExtendedROM, for wm5 user go for ALL option.
Not expected for DONATION, but always appreciated it.
Thanks Glossy.....wow first one in line..........
Downloading now and will flash it later.....will update you from the try outs.
Good work though!
I'm wondering and really hope if this is very CLEAN, FAST & STABLE WM6.5 ROM in LOW BATTERY CONSUMPTIONS for O2 XDA Atom. Thanks before GlossyX1, you're the Atom ROM masterpiece too!
Wow! Great!
Thank you for this new build. Will try soon...
Have a try and gimme some report...
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
vincentshjuan said:
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
Click to expand...
Click to collapse
What do you mean by unlock the EXTENDEDRom? I use this ROM for several days and found no problem on my device. Now I uninstalled PersianBluetooth to save more memory.
Did you found another issue? Has anyone else try this ROM?
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
cwiggler said:
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
Click to expand...
Click to collapse
Waiting for your feed. I'm not tested yed to install SPB mobile, but there's no issue when I install another cab application. You have to try it by your self and give us a report. ATOM is QVGA device. thanks
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Add application
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
I mean WM6.5(this ROM)....
vincentshjuan said:
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Click to expand...
Click to collapse
I see, you can't unlock the EXTRom as it is configured automatically in a file named config.txt. So, every chef has configured it depend on what it is configured in config.txt to EXTRom. Another thing, don't ever use other EXTrom but what is it included on ROM package, it wont work.
For the Ring mode, I can set it as usual in ring mode. Just go to setting->sound and notification->incoming call. Not working??? Try this, set to ring and vibrate, restart and set to ring.
Bluetooth??? Need some magic
I just tried to install SPB 3.5 and it works as well
vincentshjuan said:
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
Click to expand...
Click to collapse
No you cant, while run standalone application (.exe) you wont see any shorcut because it not registered to registry and doesn't have any shortcut (lnk). You can try to build CAB file and set all shortcut in (initflash.txt) for eq to put TorchLight.exe then write it down Directory("\Windows\Start Menu\Programs\"):-File("Torch.lnk","\Windows\TorchLight.lnk"), it will show Torch on Start Menu->Programs
Try this to make a CAB file http://forum.xda-developers.com/showthread.php?t=400221
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
So bluetooth handfree is not working again
vincentshjuan said:
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
Click to expand...
Click to collapse
Thanks, glad to hear you'd loved the ROM.
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
cwiggler said:
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
Click to expand...
Click to collapse
It usual happen while atom run out of memory. My ROM preinstalled with PersianBluetooth, when you try to install custom home screen eq SPB then your screen goes white. Here is a tip for you: Try to remove PersianBlue and see what happen. I'm not recommended to use any custom Home Today screen because WM6.5 use more resource than you can expected.
dragon man said:
So bluetooth handfree is not working again
Click to expand...
Click to collapse
I don't have any bluetooth device, test it by your self and give me feedback.
Cheers...
Dragon,
Bluetooth handsfree is fine, working. Only issue is choose your bluetooth devie wisely as you can only add 2 bluetooth device only at the moment. So for me, luckily 2 is just enough, one for activesync and one for handfree(bluetooth). The reason is after you added the 2nd bluetooth device, you can't see add new device tap anymore.
Good luck....