Hi!
I've a problem with my SPV C550. I flashed radio from C600, and now my phone don't turn on normal or in bootloader. Any propositions?
Regards!
haker3o5
Sorry for my English, i'm from Poland.
You have a shiny brick with buttons now. JTAG points are the only way but are inaccesable on these models I've heard.
Related
this morning when i tool the phone out the chager it waz frozen. when i soft reset it it went off and it's not cuming on. i tried a hardreset, the lights under the talk and end butons light up but it did nuthing. is there a way that i can reflash the phone in it's present state? or is it dead? can someone help me please cuz the phone isn't mine....
I upgraded my himalaya to WM5 using llbasha's rom. Everything was ok, all functions of my device was working. But one day i saw my devices screen was shaking like a old tv near a ringining cell phone. When i reset my device i see screen become white and device dont turn on. I charge battery on cradle and try about 4-5 times to turn it on i turns on but turn it on is really hard. I tried to downgrade it to WM2003 or some other roms but himaupgradeut doesnt recognise my devices rom and extrom or ce version. I tried to go on to flash the rom. Flashing finished but it was still WM05 but with WM2003se splash screen. And still screen was shaking ang still i was living white screen problem. I checked sccren connector and it was ok. Whenever i look bootloader it shakes too. I think problem is about device, not about display because when i live white screen problem any of lights turn on or any buttons work. If anyone can help me or give any advice i thank a lot.
Best regards
Azkuhraad
Solved
I solved problem by changing mainboard of device.
Hi guys
I have a dead prophet in my hands. It came dead already and I dont know what happened to it. Basicly, screen flashes when I put the battery in. Cant go on bootloader by pressing the keys. Can only go in bootloader by shorting the charger to the pins ( 1 and 5 ). Bootloader dosnt stay on if I take the cables on. It stays on only shorting it. I manage put this rom from the imate
JAMin_WWE_213923_2139123_022021_ship.zip and had no luck . ROM update sucess but phone still in the same way. Im going to try a couple of more roms to see if I have any luck. Did anyone had a similar problem ? its a G4 so there is a chance that someone previouly tried a bad rom or even can be hardware problem.
Still .. any sugestion is good.
Thanks guys
Try the ORIGINAL wall charger and then put the battery in. That might work and once th accu has charged enough you can boot.
Might be the charging-bug.
My S200 is back for repair, crashd a couple of times and now it turns on, but see no display, no LED's.
Looks like a hardware defect, on active sync the S200 seems to work.
Hard reset's didn't work out.
The Phone is equiped with an original latest WWE ROM.
It seems to be a problem of these phone's, this is the second time it broke with this problem....
There is a difference with the former problem and my latest, the former my screen never came up, with the latest it came up after removing the battery for 15 minutes, but after an hour usage the S200 crashd or didn't show any display...
Hope they are able to repair the damn thing..., it wasn't a cheap device...
Another one here!
I'm the most stupid guy in the world. I was unlocking my G4 device with Lokiwize, and it killed my Prophet . I can't Turn it on without Charger. While trying to turn it on the LCD and LEDs just blinking and nothing will happened. I Need My Device, Anyone who can help me?
I think it's IPL Problem.
Before The Update:
IPL 2.x.x.xxxx
SPL 2.x.x.xxxx
After The Update:
IPL 1.x.x
SPL 2.x.x.xxxx
Please somebody Helppppppppppppp Meeeeeeeeeeeee
I have the same problem
i have the same problem - need help
just a flashing screen after some unlock procedure!!
ivocosta said:
Hi guys
I have a dead prophet in my hands. It came dead already and I dont know what happened to it. Basicly, screen flashes when I put the battery in. Cant go on bootloader by pressing the keys. Can only go in bootloader by shorting the charger to the pins ( 1 and 5 ). Bootloader dosnt stay on if I take the cables on. It stays on only shorting it. I manage put this rom from the imate
JAMin_WWE_213923_2139123_022021_ship.zip and had no luck . ROM update sucess but phone still in the same way. Im going to try a couple of more roms to see if I have any luck. Did anyone had a similar problem ? its a G4 so there is a chance that someone previouly tried a bad rom or even can be hardware problem.
Still .. any sugestion is good.
Thanks guys
Click to expand...
Click to collapse
hey frnd 1st of all charge your phone completely then upgrade your old wm5 rom through bootloader mode .....hope it works .....best of luck
Dear all,
I just got a Dopod 838pro, it seems totally dead as i can't turn it on, i can't make it enter the bootload mode. the only thing i can see is the LED is in red when i charge it.
does any one know what's the problem and how to fix the problem?
many thanks.
I just received an s740 (Orange branded) that I bought on ebay. All worked well, but the theme was pink, from it's last owner. I thought I'd do a factory reset instead of simply changing the theme.
So I turned it off, held the vol down and central nav button, powered up, hit vol up to restore settings... everything said it was doing it's job...
Now when I boot up, I get the orange boot screen, the version numbers etc in the bottom corner, then the black screen with the orange logo for about 20 seconds, then all I get is a white screen with 'mobile operator' written in a circle and nothing else.
What's going on?
I've just tried it again, and now all I get is the orange logo on a black screen and nothing else. I can't power down or anything.
Help!! Do I need to reflash it somehow? TBH I was looking to reflash it to remove the orange branding anyway (I'm waiting for my unlock code to arrive from an ebay seller to use my t-mobile sim)
I hope someone can help, I've only held this phone for 5 minutes, not even made a call on it yet!
Typical!! As soon as I posted...
I reset it again for a 3rd time and now it seems to be installing it's software again as it should!
... and now it works again!! Phew!! Panic over!
Anyone point me to how I to about de-branding it?
Thanks