HELP PLEASE
I tried to do DCD's upgrade method to get me GPS and what not, and I got stuck at #3
1. Copy down your infromation from PST (more below)
2. Update your Hard-SPL to 2.40-olipro
3. Flash new ROM
4. Flash new Radio
5. Reprogram PST settings from earlier if necessary.
Click to expand...
Click to collapse
THEN when it was restarting it froze at the sprint splash. so i reset, and still it froze. I tried doing a hard reset and I tried the power+camera+reset combo with the stylus in
ahhhhh! please please any help is appreciated
TIA
Power+Camera then SoftReset, Just press the reset button while the power and camera are both pressed down and let them go and then the boot loader should show up
ahghhh! okay i did that and got the lovely bootloader
i hate to be retarded sounding but what next?
THANKS for your help its greatly appreciated!
OKay i tried to continue but now it says NO RADIO under the sprint logo! ahh its getting worse?
edit: of course now i can still get into the bootloader though, so what to dooo
if its of any help the bootloader says:
TITA100 MFG
SPL-2.40 Olipro
CPLD 9
u said u loaded the radio in there right, well if so go head and load the dcd rom in there now, if u dont have either go do the radio, then it will restart then freezes again if that happens do the power, camera and reset button thing and load the dcd rom then after that it will load fine
No radio means no radio. Install the full blown 3.16 to get it all, then install DCD's rom if you want.
heres a small idea. it might just work.
READ
this question has been asked a million times. geez people. if you are not willing to read and do general troubleshooting wtf are you flashing roms for?!
cluttering forums..
for the record. i want world peace as much as the next guy, but not as much as i would like to have a forum community of people who read and thought for themselves. unfortunately...much like the real world..you can idiot proof a forum
Load the image on a Fat 32 sd card, name TITAIMG and soft reset to BL, It works every time.
watson540 said:
heres a small idea. it might just work.
READ
this question has been asked a million times. geez people. if you are not willing to read and do general troubleshooting wtf are you flashing roms for?!
cluttering forums..
for the record. i want world peace as much as the next guy, but not as much as i would like to have a forum community of people who read and thought for themselves. unfortunately...much like the real world..you can idiot proof a forum
Click to expand...
Click to collapse
Don't be an effing jerk... Posts like are a waste of space* and should be considered "clutter"
At any rate... I myself had this same issue so I just tell you what I did. As you have already done, when it freezes on the splash screen, enter the bootloader. I had an issue where my pc didnt recognize my device anymore, but I was able to find an app (here on xda) that stopped Activesync. Once I did that I was able to flash a diffrent rom and start over (I used dcd's 1.6.10 Sprint)
When starting over go very slow making sure not to overlook any step. Start with http://forum.ppcgeeks.com/showthread.php?t=16806 flash it
Then flash dcd's 2.0 beta.
I'm going to be honest, between being stuck in bootloader, frozen splash screen, reading an ungodly amount of useless posts* and listening to my girlfriend tell me to "Marry the effin phone" the whole thing took me about 10 hours. So if this helps great, let me know
Load radio and os rom from micro sd!
Ok, for all sprint users that are stuck because you loaded a cooked rom without loading the correct radio first. Or you have some how overwritten the radio rom, dont ask me how I did it but i did.
Here it the fix!
I was running the 2.40 Olipro boot loader when I preformed these steps. I do not know if they will work with other boot loaders.
download the Official 3.25 rom from HTC. ftp://Mogulrom:[email protected]_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship.exe
Use winrar to unpackages it.
Format a microsd card as FAT32.
Copy Special_4350.nbh, and RUU_signed.nbh from the unpackaged 3.25 rom to the freshly FAT32 formated microsd. Rename "Special_4350.nbh" to "TITA100.nhb. Rename "RUU_signed.nbh" to "TITAIMG.nbh". Inset the microsd. Put device in bootloader mode, press and hold both power, and camera then softreset while holding the buttons. Follow on screen instruction from boot loader mode.
Hope this helps...
Related
Hey, I just tried to install DCD's newest ROM and it looks as if i may of bricked my phone. When i connect it to my PC, Active Sync will not even pick it up. this happened right after i ran Hard-SPL-MFG to unlock the phone... I did try and run the titan_exitbl but no luck. I also attempted to run the relocker but i would not even run.. any ideas?
thanks!
recover from flash
Are you at the 3 color screen? If so you need to unplug the USB and replug it again as per the instructions. You MUST follow the instructions EXACTLY or your flashing will be very scary experience.
If you are not at the 3 color screen, you need to get back to the bootloader by pressing power+camera and soft reset. This will get you to the 3 color screen. Then have a look at the version of bootloader you have. If it doesnt say Olipro 1.20 or 2.40 you still have the locked bootloader and you can flash a stock carrier rom. If you have 2.40 you can flash to the 3.16+ rom and then flash the new radio this way or via sd card install which will be more painless and less scary.
If you dont know what an sd card flash is, I would search the forums here. Over at ppcgeeks you can look up imcokeman's posts and see instructions how to do a sd flash.
If you are are real noob, I would suggest staying with non gps roms at this stage because the change of radio rom needed to enable you to flash a gps rom will almost certainly lead to sleepless nights wondering if you have bricked your machine.
Most important thing to realise is that the machine is almost certainly not bricked. But you might have a few more scary moments before you get your machine back working again. You might also need to call your carriers service desk a number of times to get your provisioning data back working.
Check all the way through these two posts and dont sweat too much. With effort you will get your machine back. The answer to your problems is listed in one of these threads, but you need to dig a fair bit to find it. The posts contain lots of problems that people had flashing this rom, and I am sure your exact problem was there and solved. Its I believe somewhere in the second link I have listed here.
Good luck. i feel for you.
http://forum.xda-developers.com/showthread.php?t=371314
http://forum.xda-developers.com/showthread.php?t=362566 particularly this bit http://forum.xda-developers.com/showpost.php?p=1856032&postcount=216
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
optyhtp said:
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
Click to expand...
Click to collapse
It doesn't need to active sync. Once it switches to USB you are ready to flash.
Stuck at Verizon Screen/HTC Mobilty Screen
If you are stuck at the VZW screen then you have only flashed one of the two essential parts. You need both (ROM and RADIO) to make it work. 3.16+ ROM will not work with the old radio. You need 3.27 radio.
Use the camera+power+soft reset and you can flash the one (new radio or new ROM) that you are missing.
See dcd's thread about the 2.3.2 rom. He has added a HUGE new disclaimer.
http://forum.xda-developers.com/showpost.php?p=1952956&postcount=1
Well nothing really worked so i used a sd card to flash back to the stock verizon ROM, i then attempted it again and got it all working!!!
Hi All,
I flashed my HTC Fuze with the below ROM
Calkulin's Visual HTC Kitchen v4 for Touch Pro and my mobile is dead now. I missed to unlock the phone before running this update (although very clearly mentioned in the instructions )
Since the mobile is not booting I am not able to flash it with any other ROM or revert back what I did. Computer does not recognize the mobile through ActiveSync. I tried resetting the mobile (Power button + volume down button + OK button), it even says restoring to factory settings, but after restart still hangs at the AT&T screen.
Can anyone please help me out here or I need to take my phone to AT&T service, but that would be the last thing to do as I think the warranty is void with this tampering.
Well, I'm pretty sure that Calkulin cooks for the Herman (aka cdma touch pro). This is your problem (and maybe not your only one).
Flash a stock rom off your sd card.
Edit: Wow, that link takes you to the cdma Diamond forum at ppcgeeks. What were you thinking?
Thanks a lot Ted...!
Thanks a lot Ted. You are my "knight in shining armor". Atleast I have some hope, I think
You just said "Flash a stock rom off your sd card.". Can you please let me know or direct me to a post that tells how to flash rom off the sd card? I am however searching for the best fit for my set.
Also, I think i need to search for an appropriate ROM for my fuze this time.
Thanks again.
Um yeah...you might've just bricked your phone. Your best bet is trying to reflash your phone with an OEM ROM via a MicroSD card, then going to one of the cooked GSM roms on this forum.
Look at the stickied threads in this forum for the procedure and links to an ATT rom.
If that doesn't work, you could try going to an ATT store and playing dumb...there's a small chance they'll replace it under warranty if it hasn't expired yet. If all else fails...you might be able to score a fuze from ebay on the cheap...I'm sure there's a lot of people upgrading to touch pro 2.
Thanks for your reply.
streetlight22 and Ted, Thanks for your reply. I will try this today. Keeping my fingers crossed . If this works, I would be happier than ever (not because I could save some bucks.. but because I love my fuze and can't see it dying).
Every where the step says "renaming the ROM nbh file to RAPHIMG.nbh or something like that. I am wondering if I also need to rename the .nbh file to something before running the update.
The rom image will be named ruu_signed.nbh (if it's a custom rom) or something longer if it's a stock rom. You should try a stock ATT rom image. Just rename it, stick it on the root of your sd card (must be FAT32), and see if you can go into bootloader. If you can't get into bootloader, you're screwed. Remember to hold volume down for several seconds after soft resetting. Press it down before soft resetting. If the tri-color screen doesn't appear, you're in trouble. It should appear briefly, then go grey with a message like 'loading image,' then it will tell you to push power. But if you flashed a diamond cdma rom, you may have totally screwed things up. Most people seem to recover from cdma touch pro roms, but if it's from a different device, you may be screwed.
Hi, if the tri colour screen appears you can try flashing trough your PC, it should find new hardware (htc hot sync or similar), then there should be USB written in the lowest part, then you can flash watever you want from the PC in the manner you are used to.
It worked.. it worked.. my fuze is now up and running WM 6.1. Thanks to all...! Special thanks to Ted for his quick reply and the tip "Remember to hold volume down for several seconds after soft resetting. Press it down before soft resetting". This is what I was not trying inorder to connect fuze with my laptop. My set is back to normal, up and running cool...
Once again thanks to everybody. xda-developers is really really a life saver . Great job guys, keep going...keep helping newbies like us.... we really need u
I've been searching on how to completely restore my (T-Mobile) HD2 on this forum for a while and haven't came to it, so sorry if I'm repeating any threads.
Basically I'm fairly novice in flashing and things in that nature. I've been flashing updating Energy ROMs on my HD2 for about six months since I got the phone. Which was fairly simple to do. Since WP7 ROMs, I've switched over to flashing those. The problem is that 99%, it'll flash fine, then won't get past the boot screen. And on the rare occasion it does get past it, I can't turn it off, or else I'll have to trying getting past the screen 1000 more times to be successful. I think I have all the requirements to run WP7, but not exactly sure.
So I would like to know what to download and flash/ install for it to be as if I bought this from T-Mobile today.
Thanks!
I need help with this too..I craked my screen and am going to send it to t-Mobile so they can send me a new one, but I want to put it to factory reset. Ive looked all over cant find them...the post a couple up...links are dead
you do realize that if you cracked your screen your warranty is already void. it doesn't matter what software you are running at this point.
diazjohn said:
you do realize that if you cracked your screen your warranty is already void. it doesn't matter what software you are running at this point.
Click to expand...
Click to collapse
Maybe they have the insurance feature?
Late answer, but go herehttp://www.t-mobile.com/wmupgrade/ to get stock ROM.
follow steps here http://forum.xda-developers.com/showthread.php?t=623402
your done.
how_weird said:
Late answer, but go herehttp://www.t-mobile.com/wmupgrade/ to get stock ROM.
follow steps here http://forum.xda-developers.com/showthread.php?t=623402
your done.
Click to expand...
Click to collapse
Sorry for MY late reply, but I put this phone away for a while and now my dad wants to use it. I've gone though the steps, but I can't get past "6. Hold the volume down key and power on your phone. As soon as the coloured screen changes to grey, RELEASE volume down." It never turns grey. I'm one step from taking this phone and throwing it out my window to see it shatter.
art0605 said:
I've been searching on how to completely restore my (T-Mobile) HD2 on this forum for a while and haven't came to it, so sorry if I'm repeating any threads.
Basically I'm fairly novice in flashing and things in that nature. I've been flashing updating Energy ROMs on my HD2 for about six months since I got the phone. Which was fairly simple to do. Since WP7 ROMs, I've switched over to flashing those. The problem is that 99%, it'll flash fine, then won't get past the boot screen. And on the rare occasion it does get past it, I can't turn it off, or else I'll have to trying getting past the screen 1000 more times to be successful. I think I have all the requirements to run WP7, but not exactly sure.
So I would like to know what to download and flash/ install for it to be as if I bought this from T-Mobile today.
Thanks!
Click to expand...
Click to collapse
I have done a dozen of flashings on my Tmobile HD2 and works fine so far. Thanks to XDA forum all the tools I need are available right here on XDA !!! You just to search them out yourself (sorry I don't have the links ....... ).
I suppose you know how to flash your phone so I will not explain details how to do it.
In brief, to install WP7 this is what I suggest you should do -
1. Update flash radio to the latest available update from Tmobile US website, regardless of what ROM you have at present (version 2.15.50.14 is the latest, I think).
2. Flash HSPL 2.08 to your phone to maximize 576 RAM usage, if you have it (do not use SPL 2.08.000 as this will recognize only 448 RAM size).
2. Use Task29 to clean out the existing the existing ROM on your phone (this will erase your OS and you will only be booting on the white HTC logo screen). This will clear out those ROM leftovers on your phone.
3. Flash magdlr 1.12 or 1.13 on your phone (press power button on boot to show magdlr menu).
4. On magdlr menu scroll down to no.5 USB flasher, connect your phone to pc and run dwi.exe on your WP7 installer and wait till installation has completed.
I have done these procedures a dozen times already I have not encountered problems so far. I have been flashing and flashing to choose the best ROM (WP7 or WM6.5.x) I want. On personal note, I think I would settle for WM6.5.x cooked ROMs because of usability and handiness (I find WP7 too complicated to deal in terms of tweaks and handling of personal videos/photos file security).
Some notes:
a. You need to flash radio and HSPL only once.
b. Use Task29 every time you need to install a new ROM (your choice, but recommended).
c. After Task29 you can start out clean and flash to stock ROM or any other rom you choose.
d. There are dozens of videos on YouTube to help you flash but I have not seen one using Task29 to start the process of flashing.
This works for me, hope it does to you as well. Good luck !!!
Hello,
this will be a pretty extensive post, but I want to give you as much info as I can so you can help me
I got a second had EU HD2 with a stock bootloader, radio, rom, ect.
Bootloader: 1.42.0000
Rom: 1.66.479.2 (76641) WWE
Radio: 2.07.51.22_2
Protocol: 15.32.50.07U
I read the forum for a couple of years now and I'm pretty familiar with all the procedures for flashing (I own a couple more htcs,
flashed in every possible way)
The problem is that the battery life is very poor: after a hard reset, so no previously installed apps, not using gps, BT, WiFi, or
anything (even phone in airplane mode), I get 6-7 hrs battery life. Even in standby the battery drains at almost the same rate.
SpoonCharge says -140ma - -150ma with no app or anything in airplane mode. I tried 2 more batteries known to go over 2 days with other
hd2s.
So, I decide the problem might be in the rom and go ahead to flash to a new one:
I chose the Artemis v.65 - http://forum.xda-developers.com/showthread.php?t=612580
I read all the instructions and all other linked to them threads. Started flashing to the stock LEO-S 3.14 with the instructions here -
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Flashed to SPL 1.66.0000, as said in step 2.
Tried to enter bootloader with VolDown and PowerOn, but it just starts the OS. From inside the OS I can enter bootloader with the EndKey
from johcos but ONLY that way! I tried another bootloader, 1.66HSPL, 2.08 SPL and HSPL, 3.03 SPL - nothing - I cant enter bootloader
manually - only through the EndKey with booted OS.
SO - why the hell??
I can go into bootloader through the EndKey, but I fear flashing because if something happens and the flashing doesn't go as expected I
wont be able to enter bootloader and fix things, no matter with USB sync or SD!
At one (brave) point I tried to flash the RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship from here -
http://forum.xda-developers.com/showthread.php?t=623283 - but it got to 1% and displayed an error: "Update utility not compatible with
device" or something similar.
So, bottom line after this long read:
1. Why/How can't/can I get into bootloader manually?
2. Why at the first place the batt life is so poor with all processes around 0%?
Thank you for the time spent reading my story!
and
Thanks in advance for any help!
here's some "hepl"
1- post in the corect section. The general forum is for these questions you know. it's quite odd for someone who've read the forums for years to make such mistake.
2- Since it's a second hand device, god knows what the previous owner did to it.
3- Does the volume down hardware key work when WinMo is running?
4- Do you turn on the device while holding down the volume down key, or do you press it after it starts, or release it before it starts?
5- I'm pretty sure the artemis build you're trying to get needs SPL 3.03 which you can get here: http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
6- try your device with SD removed. And make sure you haven't installed any program that runs in the background on the SD.
that's all I can help with
I'm very sorry for the wrong section. I was late and I was frustrated with many hours of struggling with the hd2. Please someone move it where it belongs.
@Dr.Move - thanks for trying to help!
I got it from a friend of mine and can assure I has handled well and it's never been to any kind of repair. It was never even flashed.
All keys work in WinMo.
I hold the VolDown key before pressing the PowerOn key. Tried also holding both keys together, holding VolDown and reseting with the reset button. Manual hard reset with VolUp and VolDown and PowerOn also doesn't work.
Artemis does need SPL3.03, but the flashing instructions say flashing SPL 1.66.0000, than stock 3.14-S which flashes to SPL 3.03.0000 and radio 2.15 .50.14, than Artemis. But that doesn't really matter right now, as it has nothing to do with me not being able to manually enter bootloader or hard reset.
Tried with SD in and out, formatted it (not quick) - all the same.
A thing I forgot to mention. My friend said the hard buttons didn't work, before I got the device. It happened a year ago, when we had no htc service in our country (Bulgaria) and the device had to be sent abroad, so he ditched it and got a new one. He couldn't remember what was wrong with the buttons, but it surely wasn't not being able to enter bootloader, as he doesn't even know what that is.
When I power up the device all the buttons worked and still work. (He was surprised and said "Well - good for you ).
So I'm starting to think the problem might be in the VolDown button, but the PowerOn obviously works. How can it be the buttons work in the OS and not before it boots up??
Ok, update.
I know what you're going to say, I did probably the dummest thing I could. I know now...
I did task 29, wiped the NAND. VolDown + PowerOn still doesnt work.
So empty nand and cant enter bootloader.
Is there anything I can try, what can be the reason the VolDown doesn't work (the button itself DID work in WinMo).
Can something be done or i got myself a shiny black brick?
damn
Sorry for that bro, I think you should move to the general forum now and ask there.
make sure you state your problem in the title clearly, much like you did here.
I'm sorry I can't help you any further as I'm not a developer/electrician. but seems I don't need to tell you that you shouldn't have done that before making sure the buttons worked.
Hey guys im new to this so this is my first post as you will be able to see.
Q1..So i have the HTC HD2 and im looking for a WP7 theme that actually works.
Q2..Id also like to be able to play facebook games through this phone but as i live in the UK i cant get skyfire, and help on that ??
Q3.. id love to run android on my phone but my volume down button doesnt work and all the tutorials ive seen require you to hold that button down, and tips on this
Thanks for your help and i apoligise if ive wrongly posted this thread as i said im new to this.
jd85jd said:
Q3.. id love to run android on my phone but my volume down button doesnt work and all the tutorials ive seen require you to hold that button down, and tips on this
Click to expand...
Click to collapse
since you currently have a running winmo 6.5 rom, you could in theory flash hspl, then the radio, and then the magldr flash (in that order) whilst winmo is running, meaning you wouldn't have to use the voldown button to enter bootloader.
BUT BUTBUTBUTBUT, ,
once you flash magldr (or cLK) there will no longer be a winmo rom to flash from, and since the ONLY other way to flash anything, task29, radio, magldr, stock roms, other winmo roms, hspl etcetera, requires teh voldown button, you would be stuck. And what if the magldr flash doesn't take properly? fairly often people find they have to reinstall magldr for one reason or another,, you couldn't, because you couldn't enter bootlaoder.
You would get no second chance, it would be one-shot, all-or-nothing , and i'd lay 50:50 on you ending up with a phone stuck with no rom, and no way to flash one without vol-down.
My advice would be to stay a long way away from flashing and just use haret to run sd card versions of android.
Hi and thanks for your reply, very usful info as if i didnt know that i proberly would of ended up going ahead and flashing my phone sooner or later, now that i know that ill stay away from that end of it.
So how do i go about using haret to run sd card versions of android, and is it just the same as using android but just running it from my SD card.
Thanks for your advice
i did abit of lookin about i think i get the gist of it, just a couple of questions, i only have a 2GB memory card do i need to get a bigger one, and my radio is xx.x51.x is that compatible ? thanks
Sorry i never had any success using sd android, (but it was a good long time ago) so i cant really help., however i know that 2gb will be fine at least till you know what youre doing,
The usual advice really,read as much as you can.
Ok thanks, ive just updated my radio so now running a new version so think im gonna give it a try, thanks again