I didnt write down the settings, and now I cant make calls...Can sprint give me this information?
Cytranic said:
I didnt write down the settings, and now I cant make calls...Can sprint give me this information?
Click to expand...
Click to collapse
Yes. Just call them and tell them you are having problems.
Find the "getspc" application.
Now enter ##3282# in the phone app, click "edit" and enter the
code the SPC app gave you.
In EPST click "view info" then Advanced.
In most cases the MSID will simply be your phone number.
ScottC said:
Find the "getspc" application.
Now enter ##3282# in the phone app, click "edit" and enter the
code the SPC app gave you.
In EPST click "view info" then Advanced.
In most cases the MSID will simply be your phone number.
Click to expand...
Click to collapse
exactly. I didnt bother writing anything down, since Sprint's setup is pretty easy. your MSID is your phone number, you just need getspc, punch in your ESN and it gives you your 6 digit MSL number.
telus is ever easier ... just dial the OTA programming line and it i will put it back in.
hey
i dont remember the telus # anyone have it so i can reprogarm my phone sucks not havein it workin with the new rom
well nvm i just found the telus number and sweet the net is so fast now
Related
Hi guys...
I upgraded a guys phone here at work and can't reprogram the number on it..
was alot easier on TELUS.
updated radio and added new firmware...
dialed ##441005# and get fast busy and nothing in the backgroud ! please advise!
##778# and edit would not except the MSL I got from getspc..
AvatarReborn said:
Hi guys...
I upgraded a guys phone here at work and can't reprogram the number on it..
was alot easier on TELUS.
updated radio and added new firmware...
dialed ##441005# and get fast busy and nothing in the backgroud ! please advise!
##778# and edit would not except the MSL I got from getspc..
Click to expand...
Click to collapse
DId you enter the decimal ESN or the HEX ESN to get your MSL. If you entered your DEcimal one then it would give you the wrong number.
AvatarReborn said:
Hi guys...
I upgraded a guys phone here at work and can't reprogram the number on it..
was alot easier on TELUS.
updated radio and added new firmware...
dialed ##441005# and get fast busy and nothing in the backgroud ! please advise!
##778# and edit would not except the MSL I got from getspc..
Click to expand...
Click to collapse
I did my Bell 6800, and it's working good.
It seems like you are doing everything right. I just rechecked the paper I had written down the reprogram number on, and it is definetely ##441005#.
Not an insult or anything, but are you sure you are hitting the # key and not the * key? I know that I did that the first time out of force of habit.
The MSL you are using should simply be the user's cell phone number, including area code. Same for the MDIN.
Hopefully this is in the right place, but I cannot put it in a specific area since I am new to the forums. THANKS ALL!
HELP…
I need to enter my MSL to “fix” the SiriusXM app (or other streaming apps). Before I was able to use the instructions below. With this new rom (I am thinking any 2.3, but I am running Fresh EVO 2.3.3) , it takes the code, but nothing comes up. Does anyone have a work around???
1) Dial ##3282#
2) Choose Edit Mode
3) Enter MSL
4) Choose Advanced
5) Change HTTP PD Proxy Port to: 0 (old 8085)
6) Change HTTP PD Proxy Address to: 0.0.0.0 (old pd.vog.sprintpcs.com)
Same problem here. I've been looking for an alternate, but I haven't seen anything yet. Any one had any success getting into the MSL menu with 2.3???
Reading Msl
I saw the method for reading msl code via cdma workshop but the pics showed cdma ws 3.5 and i have 2.7 will that proccess still work
u can get the msl from programs like dfs tools cdma workshop and qpst as well as msl reader from the market but i always find it easier calling your carrier and telling them you want to do a data restore or something like that.
as for it not recognizing the ##codes the person who made the rom couldve taken the epst apk in order to save room.
Ok, I opened chat to sprint support and asked for msl code. They told me that my device doesn't have MSL but then gave me what they called a 6 digit security code to reprgram my phone. Is this security code the MSL and they just didn't want to tell me.
llcobbs said:
Ok, I opened chat to sprint support and asked for msl code. They told me that my device doesn't have MSL but then gave me what they called a 6 digit security code to reprgram my phone. Is this security code the MSL and they just didn't want to tell me.
Click to expand...
Click to collapse
yea thats probably it.
also, for anyone stuck in a 2.3 rom, try these codes
*#*#3282#*#* Data Restore
*#*#786#*#* Reverse Logistics Support (device wipe)
*#*#(your msl)#*#* reprogram phone # and msid
these are the codes we use at my store for the nexus s 4g. hope it helps
I have an issue. I have my msl and enter it. Using getprop (ril.MSL 123456) then use *#*#3282#*#* enter the msl. Always get invalid code. Using the number given to me by getprop.
Would being unrooted cause this?
Sent from my Nexus S 4G using XDA Premium App
Now it doesn't say invalid anymore after reboot. Now it just exits back out to menu to select what data setting I want to edit. I select wimax and it asks for msl again.type it back out to the menu I go.
Any suggestions?
Sent from my Nexus S 4G using XDA Premium App
hello any answers
Someone please read this!
Sent from my Nexus S 4G using xda premium
So, I went into the Sprint store and I sweet talked the girl at the store to give me my MSL for my phone.. is there a way i can change my antenna PRL like you use to on the HTC EVO and similar phones to get the 3G hack?
What are you talking about "3G hack"?
I imagine we'll be able to eventually...I guess you could try flashing PRL if you are rooted and have the CWM Recovery flashed. Not sure if possible while bootloader is locked still.
Do you mean the data hack to bypass the proxy server?
If that's what you are wanting to do go to the dialer and type ##3282# and click multimedia and then click menu and edit change both IP's to 0.0.0.0 and both ports to 0.
acoleman1981 said:
Do you mean the data hack to bypass the proxy server?
Click to expand...
Click to collapse
For anyone else wondering what this is for, Sprint downsamples and caches images going to/from phones, and this disables that.
acoleman1981 said:
If that's what you are wanting to do go to the dialer and type ##3282# and click multimedia and then click menu and edit change both IP's to 0.0.0.0 and both ports to 0.
Click to expand...
Click to collapse
what's the passcode it asks for?
brianez21 said:
what's the passcode it asks for?
Click to expand...
Click to collapse
Your MSL number.
Sorry didn't see your question till now.
This is what im Referring to.
brianez21 said:
What are you talking about "3G hack"?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=696073
Is there a way to do this Hack with the Photon if I have the MSL of my Phone?
Also is the EPST capable of doing it, or do I need to downgrade my EPST to 2.1?
manekineko said:
For anyone else wondering what this is for, Sprint downsamples and caches images going to/from phones, and this disables that.
Click to expand...
Click to collapse
Not doubting since doing that increased my speeds, but where did you get this information?
Just curious where you read that.
MultiDev said:
Not doubting since doing that increased my speeds, but where did you get this information?
Just curious where you read that.
Click to expand...
Click to collapse
Do an XDA search on "sprint http proxy." This has been well-documented and discussed countless times with numerous other Sprint phones.
Beknatok said:
Your MSL number.
Click to expand...
Click to collapse
How do I get my MSL number on Android? I tried using "getprop ril.MSL" but that doesn't return anything. Thanks in advance.
I just traded my EVO 4G for a new Photon.
Would my MSL be the same, or does a new phone mean a different MSL?
brianez21 said:
How do I get my MSL number on Android? I tried using "getprop ril.MSL" but that doesn't return anything. Thanks in advance.
Click to expand...
Click to collapse
There's a MSL reader on the market that requires root or you can call Sprint CS.
Jeffrey_L said:
I just traded my EVO 4G for a new Photon.
Would my MSL be the same, or does a new phone mean a different MSL?
Click to expand...
Click to collapse
New MSL. Root and get it with the market app.
Even though I'm rooted, the new MSL reader still doesn't work since it says that the /dev/smd0 folder is missing.
TS
twospirits said:
Even though I'm rooted, the new MSL reader still doesn't work since it says that the /dev/smd0 folder is missing.
TS
Click to expand...
Click to collapse
Call CS and ask them if they can please give you your MSL Code, If they try to say they cannot give it to you, tell them that your not getting service and you need to restart your antenna keys. Works 9/10 time if not just hang up and call again.
I think the op is asking if its possible to get in to diag mode and use qpst to write a new prl such as the 000001 prl that makes the phone run off Verizon towers. The proxy hack works sometimes but it doesn't really help if you have ****ty coverage like I do. Also it disables Sprint TV. So if anybody knows the code for diag mode that would be great.
Sent from my PG86100 using Tapatalk
for someone who has a photon!
can you dial ##775# and let me know what happens?
im looking into getting this phone just have a few simple things im looking for first.
thanks.
I'm looking for the 21083 prl. Can someone point me in the right direction? Thanks.
Here you go. NOT flashable, extract the prl file.
http://db.tt/c717FNnb
sitlet said:
Here you go. NOT flashable, extract the prl file.
Click to expand...
Click to collapse
Sweet thanks.
Is there a tutorial to change this on the 3D?
1- Download the prl file and place it on the root of your sdcard
2- download Msl reader from the market
3- dial ##PRL# and enter your MSL password on a sense rom and make sure the EPST.apk app is present on the system/app with the right permission
4- on the list, Select the PRL/Press Menu/Commit.
5- reboot and enjoy..
im running 0001.prl and get great service..
I had my msl for my other 3D. Just got a new 1. MSL reader said my serial number wasn't present. And asked if my device was CDMA. Which it is.
I don't want to call Sprint for the MSL. But looks like I have to.
Anyone know of another way to get the MSL or about my error?
My PRL is 21085 in Sacramento CA
TrofeoSC said:
My PRL is 21085 in Sacramento CA
Click to expand...
Click to collapse
That's the new PRL. Which is what I have. And I'm getting awful data speeds.
Just got a new 3D. I was SOOO upset when the guy activated and upgraded everything right in front of me. I was like NOOO!
eyeisdasteve said:
I had my msl for my other 3D. Just got a new 1. MSL reader said my serial number wasn't present. And asked if my device was CDMA. Which it is.
I don't want to call Sprint for the MSL. But looks like I have to.
Anyone know of another way to get the MSL or about my error?
Click to expand...
Click to collapse
Do a chat with Sprint online. Their chat is outsourced to India, so it's fairly easy to just ask them for it, since they really have no clue what they are talking about.
eyeisdasteve said:
I had my msl for my other 3D. Just got a new 1. MSL reader said my serial number wasn't present. And asked if my device was CDMA. Which it is.
I don't want to call Sprint for the MSL. But looks like I have to.
Anyone know of another way to get the MSL or about my error?
Click to expand...
Click to collapse
MSL Reader requires root. You can also use cdma workshop to get your SPC.
louforgiveno said:
MSL Reader requires root. You can also use cdma workshop to get your SPC.
Click to expand...
Click to collapse
I am rooted.
Idk why but I just tried it again and it worked.
I had my evo 4g on Straight Talk, so I knew how to do it but the rezound is different because it has two ports.
I copied all the information from my evo 4g to rezound because I was not able to *228 activate like with the evo 4g. ( I have two phone now with the same esn number on straight talk, I keep the evo turned off with battery out.)
* you will not be able to *228, so you have to manually put in the settings.
What you need:
* CDMA Straight Talk donor phone & service plan (phone model ends in C for CDMA), and a 30-day unlimited service plan. For example, you can get the LG 220C for $50 with a 30-day plan, makes the phone cost just $5 bucks http://www.walmart.com/ip/Straight-T...ished/17113676 Never turn this phone on or put the battery in it. You just need the red card with the esn number on it.
HTC Sync to install drivers (after you have drivers you can uninstall):
http://www.htc.com/us/support/htc-rezound-verizon/software-updates
HTC Diag Drivers
http://www.filedropper.com/htcdiagdrivers
CMDA WS 2.7 (3.8 is ideal if you have the cash to buy it! I think you could do the whole phone with the full version.)
http://www.filedropper.com/cdmaworkshop27fullfree-gsm-unlockblogspotcom
DFS - download from http://cdmatool.com/Download and register for Demo account at http://cdmatool.com/Register it shouldn't expire and a Demo account will work fine, just has a nag screen making you wait 60 seconds every time you run it. After you download & install make sure to enter your login that you registered.
http://www.filedropper.com/dfs4006
QPST 2.7 build 366
http://www.filedropper.com/qpst27366
PRL and DFS settings: Contains the Straight Talk PRL for VZW/Sprint phones, and screenshots for how the DFS settings should look on a phone to get 3G working: I am using prl - 59299
http://www.filedropper.com/rezoundphone
This guide was for Flash VZW HTC Rezound/Vigor Full Flash to Cricket Wireless but it works the same and credit does to jtheis23 at XDA. from kr8zeivan's post.
First make sure you install HTC Sync for your drivers, put phone is DIAG mode (##3424#) and pull up you device manager to unsure your phone is recognized. You should see two ports:
HTC Diagnostic Interface
HTC Diagnostic Interface 9k
I understand that 8k (HTC Diagnostic Interface) is voice and 9k is net/web. If you are all good its ok to uninstall HTC Sync. Make sure you disable any anti-virus that may be running as it will remove CDMA WS it will think it a trojan because of key generator. Next I used CDMA WS to unlock phone, write NV only, write NAM 1 & 2 and write prl. If you are using the cracked version click on the yellow round icon with a small star and it will launch key and open program. WS 2.7 can use ports 1-25 so make sure you have your device connected to ports 25 or under.
1. Connect to HTC Diagnostic Interface port from the MAIN tab. Go to SECURITY tab look for SPC area (Do not read) just
enter 000000 click on SPC then click send. You should get a message saying your phone is unlocked.
2. Go to OTHER tab look for R-UIM Config: Select NV only then click on write. Should get a message saying change was successful. You can now write your prl.
3. Look for PRL on the OTHER tab should be just above R-UIM. Make sure it stays in "universal" and NAM1 and click write
load your preferred prl it should say prl written successfully. Then do the same for NAM 2. Click on MAIN tab and disconnect.
4. Connect to HTC Diagnostic Interface - 9k port from MAIN tab. Go to SECURITY tab look for SPC area (Do not read) just enter 000000 click on SPC then click send. You should get a message confirming you are unlocked. Repeat steps 2 and 3.
5. Go to MAIN tab and disconnect. Reboot phone. On my first reboot I notice it did not write but reverted the prl back to Verizon's 58008 prl. However when I continued to write the Nam info on the next steps it stuck. I don't know why.
6. After reboot put phone back into DIAG mode and reconnect to 8k port go to SECURITY and unlock the phone. Go to NAM tab. From here I was able to read from phone and write without errors. Read from Nam 1. Update MIN/MDN, MCC (310) MNC (00), local SID (whatever yours is)/NID (65535)/IMSI (xxxxxxxxxxxxxxxx) make sure you replace the X's with your area code and MIN. I used PRL enabled, System Standart, Otapa enabled. Write to phone. Repeat steps for Nam 2. Go to MAIN tab and disconnect.
7. Connect to HTC Diagnostic Interface - 9k port. Go to SECURITY tab and unlock phone. Go to NAM tab and repeat step six. Write to phone. Go to MAIN tab and disconnect. Reboot phone. After reboot from phone go to settings >Wireless networks> Mobile Networks> Network mode> Change to CDMA only. Go back to home screen. From dialer press *#*#4636#*#* and call. Go into Phone information and set preferred network type to CDMA auto (PRL). Press turn off radio (this may take a few seconds) then turn radio on (this may take a few seconds) exit. You should now have talk and text. (My rezound is rooted and I downloaded LTE switch here to change the radio to cdma prl auto)
8. Put phone back into DIAG mode ##3424# call and to to WS 2.7 to unlock only. Go to QPST and connect to 8k port. Read from phone .For me I was able to follow the QPST tutorial with no problem and update both profiles did M.IP and PPP and wrote to phone with no issues. Reboot. When I tried doing the same on 9k port I got "Serious error encountered write aborted". I tried doing it without reading just writing and still got the error message. So I finished the EVDO settings for 9k port in DFS.
Follow the pics for dfs settings.
9. Put phone in DIAG mode go to WS 2.7 to unlock phone. Launch DFS 3.3.0.7 (I used Demo version and it worked for me) connect only to port 9k do not read! Go to PROGRAMMING tab select DATA tab enter PPP UID (your#@vzw3g.com.com) pwd (vzw) write. Then Go to M.IP go to Selected Profile Settings enter NAI (your#@vzw3g.com). Set Prim HA address to 0.0.0.0, set Sec HA address to 0.0.0.0 go to Share Secret User Profile. AAA shared secret (verizon) HA shared secret (verizon). Write current profile settings. At this point you may get failed to write messages at the bottom. Just ignore them. Repeat these steps for NAM2. Press Reset upper right hand corner. If your phone does not reboot on its own reboot it. If you want you can go back into DFS and read phone from PROGRAMMING and DATA tab to see if your PPP settings stuck. Do the same for M.IP if they did not try repeating the process. I had to do it a couple of times got error messages but sure enough they wrote to phone and I was successful in getting data 3g on phone.
Grats on getting it to work on Verizon. I also have thought about doing this but just wish there was a way to get their 4g service
I got it working on straight talk with an att sim on hspa. Still want to tweak with it more to get my speeds better and connection more stable.
Sent from a galaxy far..far..away....
anubis2k3 said:
Grats on getting it to work on Verizon. I also have thought about doing this but just wish there was a way to get their 4g service
I got it working on straight talk with an att sim on hspa. Still want to tweak with it more to get my speeds better and connection more stable.
Sent from a galaxy far..far..away....
Click to expand...
Click to collapse
I have a at&t sim card from straight talk on order. I was going to give it a try also, since all you do is transfer the number over. I want that 4g too, but like the $45 for everything.
watt19 said:
Update MIN/MDN, MCC (310) MNC (00), local SID (whatever yours is)/NID (65535)/IMSI (xxxxxxxxxxxxxxxx) make sure you replace the X's with your area code and MIN.
Click to expand...
Click to collapse
Where do I get the info to update these fields if I never turn on the donor phone to obtain it's phone number/info?
Straight talk gives you the phone number after you activate the phone with the meid. Phone doesn't need to be on to do this I don't think.
Sent from a galaxy far..far..away....
isn't this cloning the esn, which is illegal?
rjuds82 said:
Where do I get the info to update these fields if I never turn on the donor phone to obtain it's phone number/info?
Click to expand...
Click to collapse
The min is all you need and you can get it when you call straight talk and activate, like the post by anubis2k3 states.
When you get ready, I will help with that part.
nrfitchett4 said:
isn't this cloning the esn, which is illegal?
Click to expand...
Click to collapse
That's what flashing is. I pay for the service but use what phone I what, so How is that wrong? I payed for the phones, so I use what I want.
watt19 said:
That's what flashing is. I pay for the service but use what phone I what, so How is that wrong? I payed for the phones, so I use what I want.
Click to expand...
Click to collapse
Agreed. Not illegal. In fact, it was ruled that modifying any electronic device by the user is legal. However, the manufacturer has the right to not accept the device under warranty after said modifying.
Sent from my ADR6425LVW using Tapatalk 2
Followed the guide and at the end of step 7 I do NOT have talk and text. Not working.
nrfitchett4 said:
isn't this cloning the esn, which is illegal?
Click to expand...
Click to collapse
Per the FCC, yes it is.
Sent from my Honey Badger
rjuds82 said:
Followed the guide and at the end of step 7 I do NOT have talk and text. Not working.
Click to expand...
Click to collapse
You was able to get the esn and prl saved, correct. When you look at the settings what do you have. It should look like the pictures for the zip file.
At step 7 did you go to the market and download the lte switch and change to CDMA prl auto only?
I looked at the guide and I did not explain how to change the esn on the phone. This was the only way I was able to change my esn on my rezound.
Part2
Changing the MEID...
1.Dial ##3424# on your phone and plug it into your computer.
2.Open QPST Configuration and connect to the HTC COM port.
3.Open the EFS Explorer client using QPST Configuration
4.Make a folder called "open sesame door" in the root directory of the phone.
5.Restart your phone and connect to it again the same way. This time, the "nvm" folder will be unlocked in EFS Explorer.
5.Open the "nvm" folder and copy the "0" and "1943" files to your computer. The file named "0" contains your flipped ESN, and the file named "1943" contains your flipped MEID.
6.open with a hex edit.Change the ESN/MEID to whatever you like (make sure it's flipped) in the files and copy the files back to the phone. Restart the phone, and you're good to go!
Note: A "flipped" ESN or MEID means that the ESN or MEID is reversed in groups of two. For example, if your phone's MEID were A1000012345678, it would become 78 56 34 12 00 00 A1 when flipped. The same applies for the ESN.
7. Delete file 0 and 1943 on the phone. The drag your edited files back to phone.
8. Refresh to make sure you copied the files.
9. “adb reboot” to reboot the phone.
10. Delete the “open sesame door” folder.
11. After done, check whether esn is good.
Still nothing. No voice. Try to send a text and I get cause code 65535 error class 3. Pretty sure it did that before anyway though.
rjuds82 said:
Still nothing. No voice. Try to send a text and I get cause code 65535 error class 3. Pretty sure it did that before anyway though.
Click to expand...
Click to collapse
Change those setting that I sent to you and let me know.
Update: Watt19 has been helping me with this. Tonight I finally got 3G working nicely but still can't call or text. Is it possible for data to work while having the wrong meid?
What happens if I turn on the donor phone to copy settings?
rjuds82 said:
Update: Watt19 has been helping me with this. Tonight I finally got 3G working nicely but still can't call or text. Is it possible for data to work while having the wrong meid?
What happens if I turn on the donor phone to copy settings?
Click to expand...
Click to collapse
I just sent you a reply,
Where can I get PRL 59299?
Thanks
TJ
dviperbigt said:
Where can I get PRL 59299?
Thanks
TJ
Click to expand...
Click to collapse
should be in the zip file.
If anyone has an MEID starting with a letter A, can you look in settings/about phone/phone identity and see if the letters are uppercased or lowercase? Not sure if it even matters but mine are lowercase and just seems odd.
rjuds82 said:
If anyone has an MEID starting with a letter A, can you look in settings/about phone/phone identity and see if the letters are uppercased or lowercase? Not sure if it even matters but mine are lowercase and just seems odd.
Click to expand...
Click to collapse
That does not matter. Mine is the same way.