after installing any of the new roms my phone constantly crashes, and i dont know why...
is there a way to pull up an error log? or someone who would know how to stop it from crashing?
ive tried, DCD 2.1, and nueROM v2, they both crash on me.
searched around, and it said i need to use a relocker after flashing the custom rom?
but i cant find a relocker for the titan.
Berserk87 said:
searched around, and it said i need to use a relocker after flashing the custom rom?
but i cant find a relocker for the titan.
Click to expand...
Click to collapse
Have you thought about searching for the term...relocker...? Just a guess.
actually i searched "titan relocker"...
and im actually wanting someone to confirm that could be the problem before i waste another 40 minutes of my life.
now im sad, are you happy?
Yes, yes I am. I had the same problem day one. If the SPL doesn't match up right, your phone will freeze minute or two after it starts up. Mine would not as long as a USB cable was plugged in. Try using this.
Hard-SPL-240-MFG.exe
yes, mine seems fine, then i unplug it and it crashes over and over again...
ok...so im using that as an unlocked which is flashing the spl.
then install the ROM, then flash the radio and it should stop crashing?
yes.
(a post must have 10 characters)
rigg419 said:
yes.
(a post must have 10 characters)
Click to expand...
Click to collapse
hahaha
k, ty, i was using Hard-SPL-240-MFG before, but i'll try this one, even though they look the same.
WOW>.........
ive been trying to run "ROMUpdateUtility" in that folder....i was supposed to be using "titanunlocker"
k i ran it.
its now telling me, "cannot open usb" after i disabled activesync through usb
oo ya, im on vista
*Sigh* Honest helpful suggestion...don't mess with you're phone anymore. It was written in quite a few threads that Windows Vista is harder to do certain things with and will need special drivers.
i have a pc running xp, i was just being lazy, ill wait till tomorrow then redo this stuff.
limezednem said:
*Sigh* Honest helpful suggestion...don't mess with you're phone anymore. It was written in quite a few threads that Windows Vista is harder to do certain things with and will need special drivers.
Click to expand...
Click to collapse
"when all else fails, read the instructions"
everytime i run this new unlocker it reboots in tricolor screen with spl-1.20 instead of 2.4
Used titanunlocker.bat and worked
Related
My rom update failed, i tried 2 recover but it doesn't work.
1. i tried to reinstall the rom with ROMUpdateUtility,
but he says their is no previous version
2. i press update, again no current image
3. more then 0% i can't get
4. after 30 minutes still 0%, then suddenly
This keeps on going, a restore doesn't work
PLEASE HELP ME!!
please read the hardspl carefully ... then try again!
Are you using Vista? If so Vista cannot communicate with the device in Bootloader mode meaning you cannot update your phone. Get XP you will have alot less problems and it will work. Vista is just not worth hassel as its only really a fancy XP with some extras chucked in.
Kurt
NetrunnerAT said:
please read the hardspl carefully ... then try again!
Click to expand...
Click to collapse
where can i find the notes about hardspl?
rumble291 said:
Are you using Vista? If so Vista cannot communicate with the device in Bootloader mode meaning you cannot update your phone. Get XP you will have alot less problems and it will work. Vista is just not worth hassel as its only really a fancy XP with some extras chucked in.
Kurt
Click to expand...
Click to collapse
not true, I have used 3 different vista machines to flash roms on many occasions and have never encountered any problems, i also have read messages from several other people that have never had a problem
NetrunnerAT refers to this post http://forum.xda-developers.com/showpost.php?p=1777082&postcount=1
oké this one was fixed until an hour ago now i can't boot
HTML:
http://forum.xda-developers.com/showthread.php?p=2092039#post2092039
kerrance76 said:
not true, I have used 3 different vista machines to flash roms on many occasions and have never encountered any problems, i also have read messages from several other people that have never had a problem
Click to expand...
Click to collapse
Yes but you need to follow a tutorial to get it to work on Vista. Basically its easier on XP and you will have the least problems. You using Hard-SPL?
A friend of mine complained to me he could't phone with his hermes, which he had gotten from someone he knew..
It didn't take me long to find out that Hard SPL was installed and the radio was damaged - no GSM.
Eventually I managed to update to HSPL v7, but I still can't flash a radio.
I tried downgrading to MFG, flashing an original ROM (WM5 & 6), using the SD-card, using the pc (with a Windows Server 03 OS), tried 5 different Radio ROMS, and so on. The only thing I haven't tried yet was the Hermesloader for Linux - mainly because I don't use linux and wouldn't know what to do (although I might have a Suse live cd somewhere).
Anyways, point is, when I update from PC it loses the connection before it starts updating and when I use the SD card it stops at 11%
Any ideas? Please don't tell me to read the forum or the wikis, because I've read anything I could find and I know a fair amount of what I'm doing, after having owned 4 HTC phones. Unless I've missed something (which is what this post is for) I've tried just about everything, but I don't want to give up on it unless I know I've tried everything I can.
Oh and I can boot into the OS btw, so it's just the radio. Bad blocks maybe? Anyway I can defragment or format them or so??
All help greatly appreciated. thx
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
check this link u find the solution
rakesh_behrani said:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
check this link u find the solution
Click to expand...
Click to collapse
You mean using a rom with KITL?
Where could I get a rom like that?
According to this page (http://forum.xda-developers.com/showthread.php?t=369434) I've got a 1a-type brick
I know, I know: First use the board-search and google...
I did that and I couldn't find anything useful for my issue.
I'm trying to update my HTC Prophet G4 to WM6.1...
I wanted to use SoftSPL and after executing the SPL.lnk the screen turns white as it should, but after that Windows XP doesn't recognize my phone anymore as connected.
I tried different USB-Ports, but the "ROMUpdateUtility_NV_G4.exe" keeps telling me "Error 260" which means it couldn't connect to my phone.
I'm really desperate cause I've already tried to upgrade for some days...
So if anyone knows how to fix that plz write =D English and German are okay with me
mickgrand said:
I know, I know: First use the board-search and google...
I did that and I couldn't find anything useful for my issue.
I'm trying to update my HTC Prophet G4 to WM6.1...
I wanted to use SoftSPL and after executing the SPL.lnk the screen turns white as it should, but after that Windows XP doesn't recognize my phone anymore as connected.
I tried different USB-Ports, but the "ROMUpdateUtility_NV_G4.exe" keeps telling me "Error 260" which means it couldn't connect to my phone.
I'm really desperate cause I've already tried to upgrade for some days...
So if anyone knows how to fix that plz write =D English and German are okay with me
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547
Thanks for posting, but as I already told you: I did my research...
So I already tried different FlashingTools, like ProphetTools etc.
When I SoftSPL, I get to the whitescreen but i cannot make my pc recognize the phone at my usb-port.
When I enter the 3-Colored-Screen manually it shows the usb-connectivity, but I cannot update the ROM...
There was a way (I cannot remember anymore which way I did it, cause I really tried very often) I entered the 3-Colored-Screen and there was "RUU" written in the right upper corner of the screen. But then again the connectivity doesn't work...
Also tried different usb-ports and cables...
I could say that I'm feeling like a weirdo, cause upgrading a rom seems easy and still makes my day miserable xD
//EDIT:
Didn't see the "Lazy_Tool" at the first glance, but now after trying I still get the same error...
//EDIT2:
Realized that the error-code could be useful^^ --> "Error[260]: Update Error" (Sth like that^^)
I had a similar issue. When your PC reports it cannot connect to the phone - does the phone restarts?
mickgrand said:
Thanks for posting, but as I already told you: I did my research...
So I already tried different FlashingTools, like ProphetTools etc.
When I SoftSPL, I get to the whitescreen but i cannot make my pc recognize the phone at my usb-port.
When I enter the 3-Colored-Screen manually it shows the usb-connectivity, but I cannot update the ROM...
There was a way (I cannot remember anymore which way I did it, cause I really tried very often) I entered the 3-Colored-Screen and there was "RUU" written in the right upper corner of the screen. But then again the connectivity doesn't work...
Also tried different usb-ports and cables...
I could say that I'm feeling like a weirdo, cause upgrading a rom seems easy and still makes my day miserable xD
//EDIT:
Didn't see the "Lazy_Tool" at the first glance, but now after trying I still get the same error...
//EDIT2:
Realized that the error-code could be useful^^ --> "Error[260]: Update Error" (Sth like that^^)
Click to expand...
Click to collapse
260 IS A KIND OF CONNECTION ERROR,
PLEASE SOFTRESET AND TRY AGAIN!!!
1. FLASH NVID FIRST,
2. LAZY TOOL TO HAVE THE JOB DONE.
dwizard said:
I had a similar issue. When your PC reports it cannot connect to the phone - does the phone restarts?
Click to expand...
Click to collapse
If u want to know if I bricked the phone then no =) I can restart it and everythings fine^^
If u meant sth else plz specify your question a bit
@ dioxda2:
Ok I'll experiment a bit^^ I'll get my new hardware soon, so maybe the error won't be a problem^^ We'll see =)
mickgrand said:
If u want to know if I bricked the phone then no =) I can restart it and everythings fine^^
If u meant sth else plz specify your question a bit
Click to expand...
Click to collapse
OK, rephrasing: the problem I had with my phone was that while a ROM update was running the phone would restart and I got the same error you did.
It turned out the battery was at fault, after replacing it with a new one - it works great.
If u do as dioxda2 says all should be fine. He is right in saying 260 is a connection error. That means unplugging all usb devices out of ur machine. It also means disabling all other connection software, like my raspberry program that display device screen when active sync'd. I always disable my anti virus and firewall (make sure ur not connected to internet at time).
i always ensure that the flashing tool is on the root drive, not in many folders (so place flash tool direct on ur main hard drive in its folder as uve unzipped) this itself can cuase connection errors. Ensure battery is 50% min too.
Good luck
Hi guys,
my htc hd2 is giving a white screen at the startup since today,
when I press volume down and start it shows this:
PB81100 HX-BC
SPL-3.3.0000 XE
I can connect it through usb to the pc,
when trying to run hspl4 it gives me
critical error
flow 00000001
Error code 000000002
Description: USB Connect Failed.
any idea how to make it work again>
Thanks!
Are you sure it does not say SPL 3.03.0000 lol just picking I know it does as there is no SPL 3.3.0000. Any way sounds like you may need to update your drivers. You can either go to control panel and device manager and find your phone click on it to make the device drop down then right click on the dropped down device and select update drivers and then select from the internet, or go and download the latest ActiveSynce or WMDC versions as the have the updated drivers.
If this does not work try changing USB ports, changing USB cables, or even change computers. Also are you right clicking on the HSPL.exe and selecting run as administrator?
I followed all your steps, updated everything, and used hspl4 as admin
now I have this
Critical error
flow 00000006
error code: 00000014
description: unknown
any ideas
rpedro82 said:
I followed all your steps, updated everything, and used hspl4 as admin
now I have this
Critical error
flow 00000006
error code: 00000014
description: unknown
any ideas
Click to expand...
Click to collapse
Are you flashing using ActiveSynce or are manually putting your HD2 into bootloader and then flashing?
Try hspl2 (or 3 for tmous), I've seen once or twice where hspl4 fails for no known reason. (And vice versa,,, sometimes hspl4 works where hspl2/3 doesn't)
T-Macgnolia said:
Are you flashing using ActiveSynce or are manually putting your HD2 into bootloader and then flashing?
Click to expand...
Click to collapse
doing it manually
samsamuel said:
Try hspl2 (or 3 for tmous), I've seen once or twice where hspl4 fails for no known reason. (And vice versa,,, sometimes hspl4 works where hspl2/3 doesn't)
Click to expand...
Click to collapse
doesnt work with version 3 or 2 since my firmware is 3.03 he gives an error saying he doesnt find the firrmware
rpedro82 said:
doesnt work with version 3 or 2 since my firmware is 3.03 he gives an error saying he doesnt find the firrmware
Click to expand...
Click to collapse
This is a long shot here but run a Task 29 and then while you do not have a ROM on the HD2 try to run the HSPL.exe as administrator agian. Be warned that any info that is not backed up or save will be lost when you run the Task 29, so if you do not want to do it I understand.
T-Macgnolia said:
This is a long shot here but run a Task 29 and then while you do not have a ROM on the HD2 try to run the HSPL.exe as administrator agian. Be warned that any info that is not backed up or save will be lost when you run the Task 29, so if you do not want to do it I understand.
Click to expand...
Click to collapse
trying this one!
can also try downgrading the spl by flashing a correct but lower version stock rom, which would then allow you to try hspl2.
Of course, the quickest easiest (and often very successfull) thing to try would be a different PC. there are dozens of threads where people try everything for hours, no luck, but 2 minutes on a different machine and hspl is installed.
rpedro82 said:
trying this one!
Click to expand...
Click to collapse
first time it did around 14% then gave an error message saying it was corrupt,
then second, third, fotrth time it stays at 0% and says recovery failed.
rpedro82 said:
first time it did around 14% then gave an error message saying it was corrupt,
then second, third, fotrth time it stays at 0% and says recovery failed.
Click to expand...
Click to collapse
There is something that is not right here and I can not put my finger on it.
There is something not right hear but I can not put my finger on it. I got another digestion, but aftercthis one I think I am going to be tapped out. Take and run the HSPL 4 again but instead of flashing HSPL flash SPL 2.08.0000 and see if it will let you do that. If it will the you should be able to flash. SPL to it then.
T-Macgnolia said:
There is something that is not right here and I can not put my finger on it.
There is something not right hear but I can not put my finger on it. I got another digestion, but aftercthis one I think I am going to be tapped out. Take and run the HSPL 4 again but instead of flashing HSPL flash SPL 2.08.0000 and see if it will let you do that. If it will the you should be able to flash. SPL to it then.
Click to expand...
Click to collapse
tried it still error :
Critical error
flow 00000006
error code: 00000014
description: unknown
now with Task29 I get error 270 when trying to do it.
Tried on two different pcs, one vista, one xp same thing.
if someone has another idea it would be great!
rpedro82 said:
if someone has another idea it would be great!
Click to expand...
Click to collapse
Hey rpedro82, I have one more suggestion for you. Now if you don't want to try thisI totally understand as I would be a little leiry about doing it myself. Some of the other members here on XDA that have had the same issue as you of not being able to get past the splash screen and not able to flash anything. This is what they did, they toke and placed their HD2 in a sealed plastic bag and set it in the freezer for 10 to 20 minutes then as soon as they took it out they flashed their HD2. I think this helps for two reasons, one if you are having overheating issues it will of course help with that temperarily. Two cold makes things contract so if you are having a issue with the processor and the main board loading connection for whatever reason the cold allows them to restablish the connection at least temporarily.
put it in the freezer, then retried, still stays at 0%
aaarg, its so frustrating,
any more ideas someone?
samsamuel said:
can also try downgrading the spl by flashing a correct but lower version stock rom, which would then allow you to try hspl2.
Of course, the quickest easiest (and often very successfull) thing to try would be a different PC. there are dozens of threads where people try everything for hours, no luck, but 2 minutes on a different machine and hspl is installed.
Click to expand...
Click to collapse
Have you tried Samsamuels above quoted suggestion you might have luck with one of these suggestions.
Hello guys...
I really need help with this HSPL...And some expert advice too..
I have problem with my EU HTC HD2 with HSPL...
I try to put 1.42.HSPL with HSPL2_run so i can put beck stock rom but after that all thing is stuck...
My bootloader screen look like this
SYSTEM DON'T ALLOW ME TO PUT SOME LINKS..
and if i try to put beck 2.08.HSPL with HSPL2_run or HSPL4 he pop-up me some CRITICAL ERROR
Flow: 00000003
Error code: 00000004
Description: Bad model ID!
Do you know what can i do? I really need help...
Thanks a lot again..
Hi rpedro82
did you find any solution for your problem ? I'm facing the same problem and I'm still on the same point even if I tried all the members' suggestions here (even for the freezer) :/
Cheers,
GJ.
I'm stuck on waiting for all devices in adb.. My phone screen has a menu with three choices, one of them is flash unlock.bin. Should I keep waiting for all devices for how long in adb?
What procedure are you using to unlock? The WTF process is the one that I believe has worked the best for most people... and that doesn't have anything special on the phone screen, so I'm thinking you're using some app or script?
dsk1000 said:
I'm stuck on waiting for all devices in adb.. My phone screen has a menu with three choices, one of them is flash unlock.bin. Should I keep waiting for all devices for how long in adb?
Click to expand...
Click to collapse
Yea, I'm following that one. I read somewhere about AMD PCs causing problems. My phone shows when I use adb devices. So should I be a little more patient or what?
No, the processes are quick. AMD Ryzens typically have issues, but it's only because of the USB driver they use. I've heard a few Intels have issues sometimes as well.
The key is, you just need to try other computers... this is the "hardest" thing to do, but it's really the only solution to that issue. The process takes under a second, so it's not a patience issue.
For the record, my older laptop with an AMD A9 CPU did the process fine... so, again, it's not a CPU issue, but a driver issue for the USB, apparently...
schwinn8 said:
No, the processes are quick. AMD Ryzens typically have issues, but it's only because of the USB driver they use. I've heard a few Intels have issues sometimes as well.
The key is, you just need to try other computers... this is the "hardest" thing to do, but it's really the only solution to that issue. The process takes under a second, so it's not a patience issue.
For the record, my older laptop with an AMD A9 CPU did the process fine... so, again, it's not a CPU issue, but a driver issue for the USB, apparently...
Click to expand...
Click to collapse
Thanks for the reply..I'm super new to adb..but I am following wtf instructions. I will keep researching..and asking questions. Thanks. PS I haven't rooted anything since my lg g3..
dsk1000 said:
Thanks for the reply..I'm super new to adb..but I am following wtf instructions. I will keep researching..and asking questions. Thanks. PS I haven't rooted anything since my lg g3..
Click to expand...
Click to collapse
Some people had to use 2 or 3 computers. An older one with Intel CPU works best (especially if it has USB 2.0), but yes an AMD can work. As noted by @schwinn8 Ryzens are no go. One guy was upset because he had superfast gaming computer and we kept telling him to try another computer. He borrowed his brother's mediocre laptop and BOOM, worked. Another guy dug some old laptop out of his closet and it worked.
Thanks for the reply...i was just reading about adb making sure it wasn't something i was doing wrong. Even tried on an old iMac that i had installed linux on. "Waiting for device..." So..still reading and learning to be patient. Thank you
dsk1000 said:
Thanks for the reply...i was just reading about adb making sure it wasn't something i was doing wrong. Even tried on an old iMac that i had installed linux on. "Waiting for device..." So..still reading and learning to be patient. Thank you
Click to expand...
Click to collapse
Also, try the steps mentioned in Wtf troubleshooting section.
Other than that you may have to mess around in the device manager section to see if the phone is detected properly or not.
(if there's a problem with the driver the device will show up as unknown android device or something)
dsk1000 said:
Thanks for the reply...i was just reading about adb making sure it wasn't something i was doing wrong. Even tried on an old iMac that i had installed linux on. "Waiting for device..." So..still reading and learning to be patient. Thank you
Click to expand...
Click to collapse
You said "patient"... just to reiterate, this process doesn't take longer on a computer that says "waiting for device". It's a fast process, so if it's not happening within a few seconds, it won't work on that setup, period. Don't waste your time waiting - get another machine/cable/etc (check the troubleshooting steps to find other possible issues... the computer is usually the biggest problem to overcome, but the most successful).
Good news, i unlocked my phone and installed twrp, then i had to stop the process (wtf)
i still need to make a backup in TWRP and flash two more files from wtf notes. I cannot seem to be able to reboot into TWRP from ADB. thanks in advance
The oem is greyed out in developer mode and says its unlocked. Idk?
Glad to hear you got it unlocked.
In the WTF post it says that the developer mode may remain grayed out after being flipped... this is normal. It comes back after some time. Of course, you don't want to toggle it again anyway, since you're unlocked...
When i go to use an app to boot into twrp..it tells me its not rooted.
dsk1000 said:
When i go to use an app to boot into twrp..it tells me its not rooted.
Click to expand...
Click to collapse
Used getvar..unlocked.
Well its done..used an old hp A6 with linuxmint. I found linux to be straightforward and easy when trying to root my phone. No jumping thru hoops and juggling stuff.
Any recommendations for remodeling the phone? Boot to twrp..roms..ect?
dsk1000 said:
When i go to use an app to boot into twrp..it tells me its not rooted.
Click to expand...
Click to collapse
Bootloader unlocked is not rooted. It's just the prerequisite to being rooted. Then you install TWRP custom recovery and then use that to flash Magisk. It's all in the WTF Instructions. Also be sure to use the version of Magisk in the WTF Instructions, at least initially.
Thanks..ive got magisk from the instructions. It wants to update..should?
Once you are booted into Android, you can update Magisk to some degree. I forget the last version I had but I recall I could go to 20.x or something without issue. But there is always a risk of having issues if you update to the latest version... so be prepared to go back to the one on the WTF thread if the phone has issues. In other words, don't do this last minute or without a PC to work from... because it could fail.
The only time you have to use the old Magisk is during that first boot with it... once you're booted through, you have been able to update to newer versions. But unless you need some specific feature of the newest version, I might suggest leaving it alone...
I read somewhere..when i upgrade on US 998 20b, i need to move up to 20c?
Also, do i use the "twrp version. 20c"?