Related
Dear Master
I try to flash my xda2 from english to chinese but when i flashing my place back down ,the phone now show serial v1.06 but can't on ,any solution to soft this problem??pls help ..
rgds
i use the serial cable and downloaded a new rom from myxda.com or tmobiles version 1.72 and installed it but the pda will shut off so just make sure it is on ..if it does shut off right bfore the up grade just take out the battery and reinstall and hit ower button without removing the serial cable and u will be or should be lol fine....
sesso900rr said:
i use the serial cable and downloaded a new rom from myxda.com or tmobiles version 1.72 and installed it but the pda will shut off so just make sure it is on ..if it does shut off right bfore the up grade just take out the battery and reinstall and hit ower button without removing the serial cable and u will be or should be lol fine....
Click to expand...
Click to collapse
hey friend
i had tried wht you saying but the phone still off n its show connection eror ??
rgds
you have to turn the phone on yourself. i can get the rom upgrade done which is stage 2 but then it freezes and loses connection at stage 3 the extended rom... so i have a functioning pda without a camera which sux.
sesso900rr said:
you have to turn the phone on yourself. i can get the rom upgrade done which is stage 2 but then it freezes and loses connection at stage 3 the extended rom... so i have a functioning pda without a camera which sux.
Click to expand...
Click to collapse
i try to do wht u said ,the system start to erase the rom from ppc but its erase untill 1-2 hours still under erase ???
sesso900rr said:
you have to turn the phone on yourself. i can get the rom upgrade done which is stage 2 but then it freezes and loses connection at stage 3 the extended rom... so i have a functioning pda without a camera which sux.
Click to expand...
Click to collapse
need your help pls ...
Hey guys and gals,
In desperate need of help. Tried to upgrade my himalaya with the Asia O2 XDA II WM 2003 SE Upgrade.
Upgrade was unsuccesful; upon turning on the XDA there are only two things on the screen; near the top, it says 'Serial", and near the bottom, "v 1.06".
The xda will not respond to hard resets nor soft resets. What can I do to recover from this disaster? When cradled, it will not connect via usb to activesync.
If this is not user servicable, does anyone know a good place in Melbourne, Australia to fix the himalaya?
Any help is appreciated!
When it's docked in the cradle, does SERIAL change to USB?
Try this:
Take out the memory card (if you have one) and the battery. Not sure why the memory card, but mine had problems with it in when I tried to upgrade.
Wait 30 mins or so for the battery backup to flatten/wipe everything (You loose everything on a ROM upgrade anyway)
then plug the battery back in and recradle it and simply try starting the flash again.
I've had similar problems, but this has always worked here and we have different devices, but I feel confident that the same solution may work.
had the same problem... my solution was docking it in the cradle (it does not show connected) and reinstall the ROM
Failed upgrade of XDAII
Hello I was in the process of updating my XDA rom and after 50% was copied to the device it dropped out.
Now when I power on the XDA it hangs on the O2 screen and my rom flash program cannot talk to it.
I have tried taking the battery out and leaving it for an hour but this has no effect.
Any ideas?
Installing rom from the SD card on boot
Is it possible to do this and if so how would I go about it?
If I cant get an OS on it its going to have to go away for repair for 3 weeks.
Also have you done a few upgrades on your XDA2 and on the same PC?
I had the same issue with my XDA2 as I was upgrading to 2003SE (before getting a 2i) and I could not get any further than the USB 1.01 screen.
I installed Activesync on a laptop, put the USB in and put my 2i in to complete the installation. Then, I put the 2 in and tried rerunning the upgrade...worked first time! I'd spent 6 hours on my PC trying to get it working.
Worth a try, certainly!
Cheers
Anthony
screen shows USB at the top and v1.06 at the bottom. HELP !!
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
forgot to mention that I tried the things posted earlier !
I tried taking battery out for 1/2 hour and then the hard reset. Still nothing
Help !!!!
My wife is going to kill me because I just bought this XDA 2 and now it is dead ! (like me soon !)
disastrous xda upgrade
try consulting dr. stein or toenailed or xda jojo and zeroxtreme. these are the tech guys in southeast asia. they're very good! :lol:
Have you tried rebooting into Bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time), then trying to rerun the upgrade?
Re: screen shows USB at the top and v1.06 at the bottom. HEL
maij said:
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
Click to expand...
Click to collapse
When you started the upgrade did all seem to go as planned? Did you have the power cable plugged in whilst upgrading? Did you notice any strange messages when it started to upgrade, and how far roughly did it get before you started having problems?
Also, what was the software version before you upgraded? Any ideas?
Cheers
Anthony
Hi Anthony: Everything seem to be going ok and then..
the screen went blank. I did have the AC plugged in during the attempted ROM conversion from Chinese to English and I tried rebooting into bootloader mode and nothing.
Do you think my 02 XDA2 can be fixed ?
Thanks
downgrade XDAII failure
Pals ,
I also facing the same problems , now my XDA II is blanked and only
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ?
thanks
if the screen shows you something like serial1.something you're still okay. do a couple of hard resets; then put the unit back on the cradle. as expected activesync will not recognize the device BUT double click the upgrade file again.
this happened to me when i went to wm2003se; forgot to do a soft reset and proceeded with the upgrade. what i did was uncradled the unit, did a hard reset (screen still showed serial1.06), cradled her back (nothing happens here) then doubled clicked on the upgrade file. it proceeded accordingly until the entire process was completed.
dont' fret, as long as something's still showing on your screen you're still a-ok.
Thanks Robs..
I will try...
Yeah, after hard-resetting the unit, it seems that it did not reset because the serial/usb letters & v1.07 at the bottom of the screen is still there. But if you drain the battery, then put it back in the cradle & restart the ROM upgrade, it will work. At least it did for me.
As I've also said but seems to have been ignored, try running the upgrade on a different PC...you may be surprised!
Cheers
Ant
thanks Anton ...
I tried so many times in my pc until the sync wont work anymore , so i tried to do at my laptop ... still same .... should i change to another pc again ? pls advice , thanks man.
Dear O2inCN
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Re: Dear O2inCN
sbudiarta said:
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Click to expand...
Click to collapse
Hi, did you manage to downgrade to WM2003? Was your bootloader version 1.06? I had problem in downgrading from WM2003SE. Hope to hear from you. thanks.
Hi Guyz
I'm trying to upgrade my friends O2 ATOM to any new software .
the problem is that when it reaches RADIO UPDATE
it stays on 0%
PDA Screen says ( UPDATE RADIO STACK ,,,, PLEASE WAIT ... )
IF I REMOVE THE USB CONNECTION , THE ATOM STICKS ON WINDOWS SCREEN , AND SOMETIMES ON SCREEN ALIGNMENT .
i tried three different roms ad got the same result , even thru BOOTLOADER screen, it is very imbarresing , as i promised him a better performance device , now it is not booting .
hhhheeeellllppppp
pleaseeee
he is looking at me and only flames are showing from his eyes
just keep flashing the device, it fails sometimes on the first flash at the radio section, simply disconnect it and then reflash it for the 2nd time.
How long you've wait the process?
I've upgrade my atom more then 10 times and when in Radio Updates it's also not showing the progress as what you've seen.
But it doesn't mean the process is stopping. Just wait and the process will finished. (Usually in it shows the progress in your PDA screen)
Don't unplug your usb cable before it finished.
unfortunatly i had to unplug the ATOM
now it gives only one massege
UPDATE UTILITY
did i brick it ?
for me, I'd take out battery a while and then connect USB and try to flash with wm5 rom like "Xda-Atom-ENG-20060105" (you can found on this forum under "Collection of All O2 XDA ATOM ROM AKU *** (WM5(2*->3*) & WM6 (0.3*->0.7*))" post).
And then upgrade to wm6 rom by ... jiggs, homer285 & udayrulz .....
hi konanda
will this resolve the problem?
yeah, I have done alot of time to solve this problem on other xda atom also .... if you want, I'l upload this wm5 rom on mediafire ....
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Just keep flashing the device.. take a bit longer time and then will complete the updating ....
abuawab said:
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Click to expand...
Click to collapse
Allow the projected 30 mins for the update, if you plan to update via SD Card be sure to read, ALOT! good luck, oh you could have a little read in the Atom Wiki too.
could be your cable or connection?
ATOM ROM update problem
I had the same problem & tried different ways explained in this thread.
No success.
I tried with old original ROM and all new ROMs as well, it stucked on updating RADIO BURN message on computer and ATOM displays Updating RADIO STACK.
I tried removing battery and kept for some times and tried back but same result. Please anyone can help me
i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.
Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?
Thanks in advance.
max20041988 said:
i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.
Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?
Thanks in advance.
Click to expand...
Click to collapse
try to update to any WM6 or if you still want the WM5, there are a lot of ROM
's available. I had this tradgic experience aswell with o2 default ROM. Im contented with the WM6 although no a2dp support yet =)
abuawab said:
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Click to expand...
Click to collapse
i'll agree with the others, better change USB cable as well =) It could be faulty you can use cable from canon digicam/motorola phones et. al.
I would suggest reflashing the ROM with cooked ROM's available here like WM6 or WM5 if you still want to stick with it. o2 default ROM gives me a headache before. No1 rule before upgrading ROM...... Read the WIKI hehehehe
Hey guys I had the same problem, I went through the procedure as here http://forum.xda-developers.com/showthread.php?t=358442
Hope u can also flash 'OS+EBoot' part of it and then after ur Atom Exec restarts u can go in bootloader and flash the original WM5 from O2 ‘Xda-AtomExec-ENG-20060614_R060428N_EX0028.exe’.
Hello everyone
( sorry 4 my bad english )
I have a small ( big ) problem.
I upgradeted my XDA1 with the upgrade from T-Mobile (GER)
Everything was good, till the XDA stoped working and the Active-Sync brocke the conaction to the XDA. On the XDA the screen showed me, that the upgrade will take 5 min. to finish, and that was all. Full stop. Now after i did started the Bootloader the screen shows just strips and nothing more... Oh yeah, i did not make a boot sd, so i could not start from the sd-card.
what can i do??? i tryed allready the super tips in hear, but i'm not realy a pc freak, so nothing worked ...
If someone of ( out there ) understood what i mean, pls help me...
Huffen
PS: Bootloader 5.15 / GSM OK
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
flash it using the sdcard then
Hello
@ Rudegar:
I did it that way, and now the thing does not atart in the bootloader anymore.
Not ure fould... Was my own risk!!!
Now nothing works....ahhhhh, what can i do now???
HELP... i get crazy... Please, if anyone can help to bring it back to life.
Thank u all very much...
huffen
when the rom is correctly on the sdcard using a sdcard reader
the reader stops being able to read the sdcard as a valid sdcard
but when in the bootloader the pda autobegin the update
if you are unsure how to get it in bootloader read xda-wiki for wallaby
the pda should at all times be connected to power
Hello,
My xda will not start at all. nothing happens anymore. just off. I switch on the and nothing happens any more. No bootmanager, just the red and green lights for the telefon are on. What can i do now? Is the xda now totaly dead? Or is it possible to restore the xda and bring it back to life?
Thanks Huffen
only think i can think off on the top of my head is
hardreset button
well i m using HP rw 6815, n last night i had flashed a O2 6.5 rom , later i was unsatisfied with tat rom,
so i went 2 change it, n during tat process, my phone turned off, n now it doesnt switch on, 1ce i managed 2 go 2 boot screen thr i cud see hp logo n bl-0.0.0 can ne1 help me out with it, how do i put bootloader in phone.. neither my pc detects the phone... NOW IT DOESNT EVEN TURN ON ... I HAD CHARGED IT COMPLETELY,STILL IT DOESNT TURNS ON. help appriciated
SOME PLEASE HELP
uzi21 said:
well i m using HP rw 6815, n last night i had flashed a O2 6.5 rom , later i was unsatisfied with tat rom,
so i went 2 change it, n during tat process, my phone turned off, n now it doesnt switch on, 1ce i managed 2 go 2 boot screen thr i cud see hp logo n bl-0.0.0 can ne1 help me out with it, how do i put bootloader in phone.. neither my pc detects the phone... NOW IT DOESNT EVEN TURN ON ... I HAD CHARGED IT COMPLETELY,STILL IT DOESNT TURNS ON. help appriciated
SOME PLEASE HELP
Click to expand...
Click to collapse
Firstly copy a rw6815 rom into MiniSD card (like installing a rom).
Put away the battery for 10 minutes. After 10 minutes insert the battery again.
Pres - and - button and the reset button with your stylus. Take the stylus back but continue to press - and - until something changes on the screen. This could be 1 or 2 minutes. After something changes you can release the - and - buttons and then new rom should start to install. After 20 minutes, you can use your rw6815.
Note: If this fails, maybe you need to install the bootloader before the new rom.
Use 68xx Bootloader 1.0.1 => HP_BL1.0.1.rar (instead of 1.0.5)
Good luck.