Hello everybody!
I unlock my S300 with the Wizard_CID_tool Lokiwiz02. It's a big mistake.
then,my S300(with SIM card in it) reset and says "data crashed,please contact your service center"(without SIM card is OK,not problem). So I want to update ROM to repair it. I use pdocwrite.exe to write the OS file,but failed and my s300 became a brick,it can't get into the OS,standing at the first flash picture.My s300 can get into three-color interface yet,but it can't be update with RUU,when RUU run to 4%, it stop automatically and say "ERROR[294]:INVALID VENDER ID(This Update Utility cannot be used for your Smartphone.Please check your Update Utility.)". I write the STARIMG.nbh file into a T-flash card to update S300,but s300 get into the three-color interface after says "checking SD contents".I don't know what to do with my s300.
Anybody can help me???
Are you using a genuine Dopod ROM? I think you need to use a genuine Dopod ROM. Nothing else is going to work due to CID checking.
Related
hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
just need ideas
as my xdaII is ****ed
i have now many choices to play with
game starts.... :x
i cant flash radio rom to my O2xdaII
it hangs on o2 splash screen wit nogsm message
itried already all verions except winows2003se
i dont know how to flash with sd card
as i dont have sd card but i have mmc card
thanks and regards
dun think you can flash the 1.03--> 1.06 BL
sa any one knows how to flash boot loader
could you be more precise, as in:
1. What was the directory contents when you started your upgrade
2. What did your devicedata file say before the upgrade?
3. What are the operator id & language of the NBF files?
4. Did you previously upgrade?
i dont know i got unit in totally dead condition
with mmc card and some rom image
Reflashing
Hello everyone, hope you're having a good Xmas.
I have the same problem but it's partly of my own making. I was upgrading my O2 XDA II to the lastest ROM (obtained from O2 website) and my laptop went into sleep mode after 46% of the upgrade was complete. Now all I have is the O2 blue screen. Soft and hard resets do nothing.
I did backup all my data (which I'm not sure includes the OS) to SDIO before starting the update and don't know if I can recover from that.
I will need to send it back to have it re-flashed if I can't find a solution but any advice you guys can give would be most welcome. At the moment my PC can't see the usb connected XDA and there's no activity on the XDA screen.
Thanks for your support people!
I have an Atom Exec with ROM 20060721B1WWE, Radio RS00011. In the seeO2 website I saw an upgrade (Xda Atom Exec ROM Upgrade (ENG) 20060721B1WWE_RS00013) which is the same ROM but different Radio, supposed to improve quality of calls.
Anyway I went to upgrade it, followed the steps until it said it was uploading it and it would take up to 30 minutes. I went to do something else and when came back the pc screen was saying that the process finished successfully, saying that I had to do a hard reset of the Atom, wait for 30 seconds and then soft restart. I did all of that and all I got it's the O2 screen and doesn't go any further.
Following indication on this forum I launched the bootloader (camera button+reset), conected the usb cable, killed activesync and run again the updater.
The DSUU can see the Atom, says 'Device CE image version:0, Device Radio Image version: (blank) to CE Image version: 7210621, Radio Image version: R060822N_MN2ARC_RS00013.
When I click on Upgrade I get an Error message: Connection error, also on the Atom says '!!! Please use DSUU in OS mode and sync with Pc first !!! USB transfer Fail'
The only backup I did prior to this was using SPB Backup, nothing for the ROM. Is there any other way to upload the ROM?
From the Windows/Temp folder I got the files used by the DSUU:
Device Software Update Utility.exe
diskimage_Ver.nb0
EBOOT.nb0
ExtenderRom.img
nova_pda_033105.mot
vl1d_pda_Ver.mot
I've seen in other forums people recovering iPaqs or Axims using these files and software like romupdate, but I'm afraid it could get worse uploading the diskimage_Ver.nb0 as it is.
Anybody knows a workaround for this?
I ended copying diskimage_Ver.nb0 and eboot.nb0 to an miniSD card. Inserted it in the Atom and lauch the bootloader. It recognized the card and Rom file, started downloading it. After that I got few messages saying some files were missing.
Screen went blank and that's it. Now is completly dead, it won't restart or anything.
I'll have to send it to Hong Kong I guess.
edunon said:
I ended copying diskimage_Ver.nb0 and eboot.nb0 to an miniSD card. Inserted it in the Atom and lauch the bootloader. It recognized the card and Rom file, started downloading it. After that I got few messages saying some files were missing.
Screen went blank and that's it. Now is completly dead, it won't restart or anything.
I'll have to send it to Hong Kong I guess.
Click to expand...
Click to collapse
I experience the same and now my atom is dead. Please help, anyone???
Get in contact to O2 in the region you bought it, I bought mine in Hong Kong, I contacted them via seeo2.com.
edunon said:
Get in contact to O2 in the region you bought it, I bought mine in Hong Kong, I contacted them via seeo2.com.
Click to expand...
Click to collapse
So what's their instruction? Do we really need to bring to to their service center? Can it still be recovered? Can we do it by ourselves?
You need to replace processor. Cost about 200$ in Moscow.
Ok. Thanks.
I cant find this rom at google. My bad hands flush the 6.1 rom and forgot to unlock the cid. so right now the phone cant enter to the system. only RED DOPOD letter appear after switched on. Is there any way to fix this problem? Thanks a lot in advance
PS i am thinking that if i have the same rom as mine, i can flush it again using memory card, maybe it will work....
Does anyone have the official WM5.0 iMate Smartflip ROM? I managed to almost brick my Smartflip, but I can get it to recognize the micro-SD card and start the flash process. Every install I've tried, though, returns an "Invalid Certificate" error. The clubimate.com site appears to be no longer in existence.
Found it....
ssn04 said:
Does anyone have the official WM5.0 iMate Smartflip ROM? I managed to almost brick my Smartflip, but I can get it to recognize the micro-SD card and start the flash process. Every install I've tried, though, returns an "Invalid Certificate" error. The clubimate.com site appears to be no longer in existence.
Found it....
Click to expand...
Click to collapse
Read the STRTRK CID Unlock...