Can't get MediaNet/GPRS settings to work. - HTC Startrek

I recently upgraded to the new WM6 ROM, for the StarTrek and now I can't use PIE or any other web browser. There were no ATT factory settings with this ROM so I had to enter all the GPRS and Proxy settings manually. I looked them up and entered them exactly as they were written and I still can't use it. PIE just says connecting then Locating for a while and then says: "The page cannot be found. check the name and try again." It can connect (although other apps still can't access the internet) so I think the problems with the proxy. Any suggestions would be greatly appreciated.

me too.Is anyone can save us?

You can try the cingular Rom from the other thread. That works for me (although there are other issues).

Deckard99 said:
You can try the cingular Rom from the other thread. That works for me (although there are other issues).
Click to expand...
Click to collapse
Thats what I did and it works perfectly, GPRS is working!

Cingular ROM
What Cingular ROM?

DaMilky said:
What Cingular ROM?
Click to expand...
Click to collapse
Just go to the other thread about boring and clean ROMs.
Bye

Related

No 3G after upgrading to WM6

Hallow.
I have upraded my Vario2 to the following settings:
IPL-1.04, SPL-2.10.Olipro,
with Radio V-1.41.00.10 and WM6 pro Black 3.0.1 ROM .
The upgrading went perfect with no problems.
The device boot properly.
The only problem is that the data connection stays on GPRS where I know there is a 3G connect.
T-Mobile support dont want to help solving this problem.
Any Idea anyone?
Regards
Lior Lavon.
umm to my understading T-MOBILE only has EDGE not 3G...at least in the U.S.
LunaWizard said:
umm to my understading T-MOBILE only has EDGE not 3G...at least in the U.S.
Click to expand...
Click to collapse
Well it is not the case in holland, TMobile has 3G and UMTS.
Any way I had 3G before I upgraded the device.
Have you tried putting your Radio Rom back to 1.40 just to see if that makes a difference?
llavon said:
Hallow.
I have upraded my Vario2 to the following settings:
IPL-1.04, SPL-2.10.Olipro,
with Radio V-1.41.00.10 and WM6 pro Black 3.0.1 ROM .
The upgrading went perfect with no problems.
The device boot properly.
The only problem is that the data connection stays on GPRS where I know there is a 3G connect.
T-Mobile support dont want to help solving this problem.
Any Idea anyone?
Regards
Lior Lavon.
Click to expand...
Click to collapse
I take it you had 3G before you upgraded? I would point the fault at the operator settings have you reinstalled these since the upgrade? You will need to search on xda for the operator settings there are cab files for them.
Have you tried flashing black 3.0.1 again? I know this sounds weird but I had the same problem at first, when I reflashed it, I had 3G again
Cheers
Jygar said:
Have you tried putting your Radio Rom back to 1.40 just to see if that makes a difference?
Click to expand...
Click to collapse
can I use an old radio with the same ROM of WM6? or I need also to change the ROM to older one?
boz said:
I take it you had 3G before you upgraded? I would point the fault at the operator settings have you reinstalled these since the upgrade? You will need to search on xda for the operator settings there are cab files for them.
Click to expand...
Click to collapse
1) Yes I had a 3G before and I lost it after the upgrade process.
2) I followd the instruction in T-Mobile site about the requested configuration.
3) I will look for the cab files you mentioned about the operetor setting.
What would be a good test? to change my Radio or my ROM version?
And to what version?
Regards.
llavon said:
1) Yes I had a 3G before and I lost it after the upgrade process.
2) I followd the instruction in T-Mobile site about the requested configuration.
3) I will look for the cab files you mentioned about the operetor setting.
What would be a good test? to change my Radio or my ROM version?
And to what version?
Regards.
Click to expand...
Click to collapse
Here is the cab file you require below. Have you checked with t-mobile that the service is ok where you are? If this is not the problem, I would first try a soft reset, if no improvement try a hard reset. Failing that try downgrading your radio to 1.40 as I found this radio version better than 1.41. (remember to soft reset after, and remember the radio upgrade/downgrade will not cause you to lose anything you have saved on your device). If this does not work then try reinstalling the black rom.
But I would bet it is the operator settings.
Close, but no cigar......
boz said:
Here is the cab file you require below. Have you checked with t-mobile that the service is ok where you are? If this is not the problem, I would first try a soft reset, if no improvement try a hard reset. Failing that try downgrading your radio to 1.40 as I found this radio version better than 1.41. (remember to soft reset after, and remember the radio upgrade/downgrade will not cause you to lose anything you have saved on your device). If this does not work then try reinstalling the black rom.
But I would bet it is the operator settings.
Click to expand...
Click to collapse
The Dutch settings for T-Mobile (not the UK ones, @boz ) can be found >HERE< - this is by far the easiest thing to try before you get stuck in with downgrading radio versions or reflashing the ROM....well, IMHO it is
Cheers,
Mark.
Mark Crouch said:
The Dutch settings for T-Mobile (not the UK ones, @boz ) can be found >HERE< - this is by far the easiest thing to try before you get stuck in with downgrading radio versions or reflashing the ROM....well, IMHO it is
Cheers,
Mark.
Click to expand...
Click to collapse
Just shows that even I need to read properly sometimes!
make sure the ROM ur using has 3g as some roms dont

IOTA Problem With New Sprint ROM

I am having problem with the internet after flashing the new rom. I've tried resetting the profile, client IOTA (No response), hard reset, soft reset, reflashed and to no avail. Please advise.
did u let sprint install all the customized software after 1st flash?
Problem solved. I installed IOTA.cab separately so that it can run. Thanks.
can you link us to iota.cab? thanks
fusQer said:
can you link us to iota.cab? thanks
Click to expand...
Click to collapse
the iota cab is in your extended rom folder...if you have your er unlocked just select it from there...
i'm sorry i dont understand. where is the extended rom folder? i have dcd 3.0.0 and internet doesnt work so i want to run iota.cab.
Someone mind rapidsharing this? I dont have the tools to get to my extended ROM, I made my own IOTA cab from bits I copied back out of the Sprint ROM after it was flashed.
fusQer said:
i'm sorry i dont understand. where is the extended rom folder? i have dcd 3.0.0 and internet doesnt work so i want to run iota.cab.
Click to expand...
Click to collapse
yeah i just ran into that problem when flashing to dcd 3.0.0
Yay 4 Juggs said:
yeah i just ran into that problem when flashing to dcd 3.0.0
Click to expand...
Click to collapse
you said to check in the extended rom if its unlocked. how do i unlock it?
http://forum.ppcgeeks.com/attachment.php?attachmentid=5022&d=1202108628
from the 3.0.0 ROM Thread...
I also have extremely slow data transfers and high latency after installing DCD's kitchen 3.0. I'll give IOTA a try and hopefully it will fix it.
Edit: IOTA errors out for me, guess its back to the stock rom for me.
ilogik said:
I also have extremely slow data transfers and high latency after installing DCD's kitchen 3.0. I'll give IOTA a try and hopefully it will fix it.
Edit: IOTA errors out for me, guess its back to the stock rom for me.
Click to expand...
Click to collapse
I flashed the new Sprint ROM. I then did the ##728# stuff and changed to Rev. A. I let the Sprint Customizations Run as it booted the first time. I I took a drive and tested the GPS. It worked great. I also tried the Rev. A. I could see no difference in performance. Latency seemed down.
Then I used the "Clear Storage" program under Settings/System. While it was rebooting, I soft reset as soon as the Sprint Customizations began loading. I didn't want the bloatware installed.
Evidently I cleared the IOTA. It would be great if someone could post that cab here so we could try. The device did seem to work without the Sprint stuff loaded. Latency was poor.

Help flashing ntelos 6800

I've flashed DCD's 3.3.4 rom to my ntelos ppc6800... I used the sprint carrier cab, but now don't have any data connection. Do I have to manually edit settings? I did record my EPST settings before flashing. Help?
EDIT: Ive reflashed to 3.2.6, sprint cab still not working for me. Is there a way I can put in the settings myself, or does somebody have a carrier CAB for ntelos? I'm seriously screwed here...
Alright, after a few trips to nTelos I finally got my internet connection working. If anyone else has this problem I'll try and explain everything I did the best I can.
After flasing a new rom i have no internet i would love to know how you got it to work
Sorry I didn't see this earlier. If you still need help could you tell me which rom you tried and send me your epst settings?

[Q] ParanoidAndroid (and other) JB ROMs - Can't get mobile network to work

I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
alchemist83 said:
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
Click to expand...
Click to collapse
Thank you for the suggestion. The APN settings on a fresh install, all wiped, are correct and the same as in a working setup.
Any other ideas? Am I really the only one with that problem?
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
JJEgan said:
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
Click to expand...
Click to collapse
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
DF5JT said:
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
Click to expand...
Click to collapse
Possible hardware problem then .
jje
JJEgan said:
Possible hardware problem then .
jje
Click to expand...
Click to collapse
Very unlikely since it works on stock ROMs and [email protected] 0.6.
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
d4fseeker said:
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
No, that's not what I said. Stock ROMs work just fine; I actually just flashed the latest leak (DLI5) and had no problems with the network. The problem hasn't changed, so it's what I wrote in the OP: Only JB to work ist latest leak and [email protected] 0.6. All others can be installed but have not network connection other than WiFi.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
EDIT: If it helps, I speak/write fluent german ('Cause I live in germany ^^)
familyguy59 said:
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
Click to expand...
Click to collapse
Thanks for trying to help.
Yes, I have been playing around with all kinds of basebands, trying to flash modems etc. but that does not seem to be the reason for it. I have had different modems working and the very same modems simply did not work with PA at all. Best example ist yesterday's leak DLI5 which I flashed and had a virgin like system working just fine with my network. I then flashed the PA ROM, which then had the same baseband as the latest stock ROM, but, alas, same story: No network.
The weird thing is the brief connect it always shows in the status bar. It lasts roughly 4-5 seconds and then disconnects again, only showing the empty network status display.
It really sucks, because I find the idea of hybrid ROMs really appealing, in fact, this seems to me as a truly superior way of making use of the 720p display.
Need to try logcat next to see whether the connect/disconnect somehow can be monitored from there. Will report on that.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Bump.
Nearly the same prob to me! I loose data if I change my location, also provider "3" in Austria! Stock is working, CM10 nightly also. I tried different Modems tomorrow the ODIN Leak.
Andi
me too
no data network after flash on two diffrent galaxy s2's
kaos7 said:
no data network after flash on two diffrent galaxy s2's
Click to expand...
Click to collapse
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
WiFi works, Mobile Networks do not
2Fast 2Low Customs said:
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
Click to expand...
Click to collapse
I just installed ParanoidAndroid. I'm kind of a noob to all of this.
I understand some, but not all.
My mobile networks are not working.
I don't get any notification at the top of the screen either saying I'm on a mobile network.
I've messed around with the APN settings. It seems that every now and then it'll connect for a brief moment, but I can't really do anything unless I'm connected to WiFi.
Any help would be appreciated.
I came from a stock phone rooted.
Installed this and now I'm here.
Please HELP!!
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
BHARGAV33 said:
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
Click to expand...
Click to collapse
Turns out I just had crappy reception at home.
I wanted to get 3+ but something got in the way and had to go with the 2.+
Sorry for not understanding, but what is AOSP? I see that, but I don't get what is what.
ASOP = Android Open Source Project.. They are best but not that much good at battery
Spend some time on xda and Google your doubts.. You'll surely understand everything from android

[Q] [XU] Can't download internet&MMS settings

I just flashed terrarom v5 but I can't download internet&mms settings (either sliding or trancendence kernel). It works for me when I just flashed it before but now it doesn't.
I try to flashed stock roms and it works. I don't know what the problem is, any help or suggestions?
HollowCrown said:
I just flashed terrarom v5 but I can't download internet&mms settings (either sliding or trancendence kernel). It works for me when I just flashed it before but now it doesn't.
I try to flashed stock roms and it works. I don't know what the problem is, any help or suggestions?
Click to expand...
Click to collapse
Well, which carrier are you using? If you are not able to download the settings, contact your carrier operator and tell him your phone model and ask them to send settings for it. If they refuse, don't worry, the best option is to search your APN settings on Google of your carrier and enter them manually.
moli2398 said:
Well, which carrier are you using? If you are not able to download the settings, contact your carrier operator and tell him your phone model and ask them to send settings for it. If they refuse, don't worry, the best option is to search your APN settings on Google of your carrier and enter them manually.
Click to expand...
Click to collapse
I thought the problem is from my carrier. They are upgrading their 3G. For now, I can download it as before.

Categories

Resources