I used to have a prophet. I tend to buy a 8525. I am searching hole hermes topics. I have I few questions.
First Question: Any G3 G4 like wizard and prophet?
Second: Do all mainboards herm100 herm200 are the same and only differences is out the key layout?
thirdly: All/ANY rom are suitable for 8525 on this pages?
Is it easy to cook a rom? For example I take a rom and dump it and take out second camera, voip feautures and flash 8525?
last: it is the same question as my second question. 8525 mainboard has a empty socket for second camera or it is different and has no circut and socket for it. If we find camera and plug it and of coarse cover it with and open window faceplate, do we have a common hermes?
Related
Has anyone seen a kaiser yet? the spec sheet sounds exactly the same as the tytn xcept for the "addition" of gps and of course the auto slide keyboard.
Next time I pin down an HTC rep at a meeting im gonna try and find out more about the kaiser, I have a sneaking suspiscion however that the kaiser is rev 3 of the hermes platform and ay even be a hermes itself.
perhaps the rom of the kaiser will shed some light upon the confusion of hermes GPS.
what do yall think?
I have a phone here, the Niki touch dual with a qwerty keyboard. The device ID is NEON200 and im unable to to flash it? wrong device ID. There are many differences such as, the stilus is colapsable and goes in the bottom left, the usb is behing a rubber door at the botton of the phone, power button is on the right hand side of the phone, sim card enters a door under the volume button.
very strange, going to have to cook my own rom to get one in there,
for interest its Telstra Australia branded (one of our major phone carriers) and it supports 850MHz and 1200Mhz HSDPA and UMTS !
Dave.
http://www.theunwired.net/?item=approval-bluetooth-sig-approves-the-htc-neon-200-an-indication-for-a-umts-touch
yes thats the one, I have dumped the rom if any one is interested, with the exception of part03
so the variant that telstra is selling can not be flashed with new ROMs unless it is specficially designed for it?
It seems that HardSPL cannot be flashed unless the device ID matches. This makes the ROM flashing difficult if not impossible. Unless a HardSPL flash file could be customised to suit the NEON200 device ID I believe. I may be wrong, I am still new to this.
My advice would be to AVOID all rom's and tools designed specifically for the NIKE and wait until someone finds out more about the NEON
Dave.au said:
I have a phone here, the Niki touch dual with a qwerty keyboard. The device ID is NEON200 and im unable to to flash it? wrong device ID. There are many differences such as, the stilus is colapsable and goes in the bottom left, the usb is behing a rubber door at the botton of the phone, power button is on the right hand side of the phone, sim card enters a door under the volume button.
very strange, going to have to cook my own rom to get one in there,
for interest its Telstra Australia branded (one of our major phone carriers) and it supports 850MHz and 1200Mhz HSDPA and UMTS !
Dave.
Click to expand...
Click to collapse
Please dump the SPL:
pmemdump 0x8c000000 0x80000 spl-niki-neon200.bin
(pmemdump is part of itsutils by itsme, run it on PC with a activesync connection)
I will do, Ill get this phone back, its Danoss who owns this phone, see post no #5, here is the rom dump for anyone interested in adding it to their collection 57.8Mb RAR no password at
http://rapidshare.de/files/38517912/HTCNEON200_romdump.rar.html
Hi Jockyw2001, here is the dump you requested, Thanks for your interest!
http://rapidshare.com/files/90050852/spl-niki-neon200.bin.html
The SPL dump is okay. If I have some time left I will develop a SSPL and HardSPL for the NEON guys.
I think we need a new forum for NEON.
Different Hardware and same forum will be very confusing..
Like Elf an Vogue..
That might be a good idea, as it seems there is a new package in the same phone (nearly) and im sure it is going to throw off a few when they first start playing with it.
I would third that motion for a new NEON forum.
I support the new NEON Forum
Yes, my neon arrives today. I vote for a seperate forum also. Cut the confusion.
I agree with the new forum too. There are quite a few differences in the specs on these phones compared to the Nike/niki. After lugging around a Hermes for the last 2 years my wife loves this phone. Haven't told her theres no wifi yet.
Update: She knows about the wifi :-(
A few things I have discovered about the phone.
HHC (Htc Home Customiser) Doesn't work correctly. You can install and load it, change the settings but it never completes when you hit the save button.
CE Star Chinese character recognition and keyboard screws up the slide out keyboard functions.
hi there,
1) after upgrading ny hermes-200 the ear speaker 9nit the loud speaker from the rear) stopped working. Now I cannot make phone calls and put the phone near my ear.
Does anyone familiar with such a problem? Or is it just a hardware failure?
Is there some way to Diagnise or solve this issue?
My cuurent rom is: Schap`s 3.60a
2) I`ve read almost every word In the hrmes wiki and I couldnot finde any WM6.1 cooked Rom for the hermes-200. IS there one availeable?
Or i`ll have to cook one by myselfmad:don`t like being in the kitchen)
Regards
You looked but ddn't read then as THIS IS A HERMES FORUM.... EVERY ROM on it is compatible with a Hermes device.... In the WM06 section any ROM that says 6.1 is compatible with your HERMES...
However, there is no OFFICIAL wm6.1 ROM as HTC don't support the Hermes anymore.
As for the speaker, did you drop your phone as this could have jarred the connection and the speaker connection may no longer be in contact. The front speaker connection is a mongrel to get to as the phone has to be completely broken apart.
Here is the tutorial on what you need to look for - http://forum.xda-developers.com/showpost.php?p=2001027&postcount=5
You will need to open your Hermes.
Cheers...
Tnx
Appreciate your reply.
I`ll try to open and fix the speaker.
Can you direct me to a wm6.1 rom.
I could not find it.
I think that a new organization of this wonderfull project
can help a lot new users
TNX
Okay so I recently purchased an i-mate Spartphone I have a couple of questions that I couldn't find thru the search feature.
1st I was wondering is the phone I have a Qtek 8500 (I think thats what I read on here) it only says imate on the outside and smartflip below the inner screen and say's imate on loading.
2nd when I use the camera all I see is static no picture... is there a way to fix this or should I load a different rom? I am thinking of running the rose or neo rom anyways (I have to get on my home computer and do the unlocks first I believe)
3rd I am also new to Winmo phones so I was wondering if there was any nice apps that anyone could point me towards.
Thanks in advance
spinn360 said:
Okay so I recently purchased an i-mate Spartphone I have a couple of questions that I couldn't find thru the search feature.
1st I was wondering is the phone I have a Qtek 8500 (I think thats what I read on here) it only says imate on the outside and smartflip below the inner screen and say's imate on loading.
2nd when I use the camera all I see is static no picture... is there a way to fix this or should I load a different rom? I am thinking of running the rose or neo rom anyways (I have to get on my home computer and do the unlocks first I believe)
3rd I am also new to Winmo phones so I was wondering if there was any nice apps that anyone could point me towards.
Thanks in advance
Click to expand...
Click to collapse
The phone is made by HTC but is also sold as other names such as i-mate smartflip.
I have an i-mate smart flip that I purchased on e-bay and was able to use the camera just fine with the original WM5 ROM. Though I must admit that after upgrading the ROM to Erofoch's Windows Mobile 6.1 Professional for HTC StarTrek the camera works even better with the camera night mode option.
This version of WM6 works amazing on this phone, it also has BatteryStatus set up with safe and quick overclocking.
It took me a while to figure out all the steps, there is so much great information in this forum that it can be a bit overwhelming. I was directed to this wiki web page which outlines the ROM upgrade process step by step. http://wiki.xda-developers.com/index...Trk_ROM_Update
For the Mobile 6.1 Pro ROM that I installed I only had to stop at step 2 because this ROM does the rest.
I hope this helps.
Kind regards,
Rudydb.
Okay I installed the Rose Rom by pampooh??(probably mispelled hope does not offend) anyways still just static on the camera not a huge deal for me I have a different camera phone for that purpose just was hoping it would fix it may be that I just got one with a bad camera but oh well
Yep, sounds like a bad camera. In general, when there is a driver issue, you will either get an error message when you launch the camera, or else a blank screen, but definitely not static.
iMate, Startrek, 3185, and a few other names are all the same phone. HTC sells the phone to Cellular carriers, and they can name it whatever they want. With the phone nerds here at XDA, the easiest way to refer to it is as "StarTrek", since this was the HTC code name for the phone. All the phones are basically alike, except for the Cingular/AT&T 3185, which has a larger battery, and twice the ROM (64MB instead of 32MB). You can buy the extended battery and associated back plate on eBay if you want it. All the versions of the phone run the same software and operating systems.
Software:
Tons of good software out there. What you will like is a matter of opinion. I can't live without:
1. Microsoft Voice Command 1.6 - Gives you text to speech, and awesome voice recognition.
2. Coreplayer - An actual working media player for the phone (not crappy like WMP).
3. Replacement calandar/tasks program - Tons out there, but I don't like the MS one.
4. Games - Again, find ones you like.
Hello,
I'm new here and I wanna get my 8GB SDHC card working in my SDA II.
I already tired several ROMs and several SDHC drivers for the Hurricane, f. e. hxxp://forum.xda-developers.com/showthread.php?t=351586 or hxxp://forum.xda-developers.com/showthread.php?t=344338 , but at anyway none did work after all
So I have a SDA II with inside a microSD 8GB Kensington with miniSD Adapter and atm hxxp://forum.xda-developers.com/showthread.php?t=475286 that ROM (WM 6.1) patched with some SDHC drivers but my SDHC card is not recognised by the phone...
Anyone got an idea?
Thanks in advance
Keyno(t)
Ouw and btw: is there any ROM for this phone with WM5 or WM6.5 in English? I only found the 6.5 Chinese version... or how to change it to English?
I doubt you will find anything for SDHC on this device. Only for Tornado - after a long wait - someone found out that OMAP850 drivers for the Startrk could also be used for the Tornado.
I don't know how the Startrk drivers were created, but for sure there are HTC devices using OMAP 850 which have SDHC support on WM6. So it was sure that the Tornado can support it as well from HW point of view.
If you do not want to create a low level driver for OMAP 750 yourself, you could invest in finding a device with OMAP 750 (like the Hurricane uses) that has WM6 and SDHC support. It is however not likely you find one :-(
If you like your Hurricane - don't worry. You can replace the PBA inside the Hurricane with a Tornado PBA without any other change to the device. They are 1:1 compatible (mechanically: identical size in any regard and electrically: LCD, keyboard, Camera).
So if you find a broken Tornado (no matter how worn or cracked) where the PBA is still alive - get it and give it a new live in your housing of the Hurricane.
Hey tobbbie!
Thanks very much for your reply! Und ach ja, ich bin auch Deutscher :-D
Hmm soooo, it would be very hard to find/create a driver for the Hurricane, right? But why are there topics with drivers made for the hurricane?
And otherwhise I'd have to open the phone and change the PBA with a Tornado one, right? But can I take that PBA out so easily? I won't have to solder or anything like that?
Again, thanks for your help!
Keyno(t)
There are no Hurricane specific driver threads. It is a re-use of generic WM 6 variant drivers on top of the low-level drivers.
And yes - if you manage to open the case (be careful when opening not to rip away the flex cables for camera and keyboard) then there is no soldering required.
Look up the service manuals for either Tornado or Hurricane (even Typhoon will do) to get an idea which screws to remove and how to remove the antenna cover. Challenge is to swap the LCD if you need to - some delicate handling of the flex connector as well there.
No impossible mission, but you need some mechanical skills and a rainy day without time pressure if you do it the first time.
Depending on your budget the cheapest solution may be to wait for a good opportunity on ebay to buy a used Tornado - they get sold for 20+ euros. If you do not need WLAN, then go for the SPV C600 (France) or the O2 XDA phone - but these are rare species these times.
Hmm at anyway I don't find anything in ebay I could need...
So you also said it could be possible to write my own driver? Is that true? And you know any How-To's that could help me a bit by this?
And really thank you for your help!
Keyno(t)
Finding this on ebay will require a few weeks - so be patient and keep on looking. How much would you want to spend for a Tornado (XDA phone - no WIFI, or the 8310 with Wifi)?
Regarding the drivers: Seems like you did not get the irony in my comments Writing low level drivers is something very special. It is virtually impossible to write a driver on your own - so forget this option!
Ouw okay, and yes I didn't exactly understand it
So I have only one choice
I think it shouldn't be more than 20€, max. 30€.
And could I really have also WiFi in my Hurricane, or why you ask all the time about WiFi?
I don't really need it, but if the price just change about 5-10€ I'd rather buy one with WiFi
And again: thank you very much for your help!
Greetings
Keyno(t)
Did you get it? If you replace the PBA - then you may still have the case of a Hurricane (despite in the US or China the same case carries a Tornado) - but the device is a Tornado then - bye bye Hurricane.
The Tornado was built in two flavours with and without Wifi - more common in Germany was "without" as the O2 XDA phone has no WLAN. The other device is the Qtek 8310 (also in silver as Vodafone VDA 2) which has WLAN. It will only rarely happen that broken devices are sold (people just put them in the waste or return them to the shop for recycling) - but keep on watching.
If you get a fully working Tornado I would not bother to replace the PBA but use it as it is - unless you disassemble it for fun and learning.
Okay thank you very much for all your help!
Now I got it
Greetings
Keyno(t)
...just to close the query: It IS (!) possible to have SDHC in the Hurricane working. read about it in my related kitchen thread (post 4) http://forum.xda-developers.com/showthread.php?t=1553132
Kitchen is not updated yet - but who cares anyway...