Hello,
I'm new here and I wanna get my 8GB SDHC card working in my SDA II.
I already tired several ROMs and several SDHC drivers for the Hurricane, f. e. hxxp://forum.xda-developers.com/showthread.php?t=351586 or hxxp://forum.xda-developers.com/showthread.php?t=344338 , but at anyway none did work after all
So I have a SDA II with inside a microSD 8GB Kensington with miniSD Adapter and atm hxxp://forum.xda-developers.com/showthread.php?t=475286 that ROM (WM 6.1) patched with some SDHC drivers but my SDHC card is not recognised by the phone...
Anyone got an idea?
Thanks in advance
Keyno(t)
Ouw and btw: is there any ROM for this phone with WM5 or WM6.5 in English? I only found the 6.5 Chinese version... or how to change it to English?
I doubt you will find anything for SDHC on this device. Only for Tornado - after a long wait - someone found out that OMAP850 drivers for the Startrk could also be used for the Tornado.
I don't know how the Startrk drivers were created, but for sure there are HTC devices using OMAP 850 which have SDHC support on WM6. So it was sure that the Tornado can support it as well from HW point of view.
If you do not want to create a low level driver for OMAP 750 yourself, you could invest in finding a device with OMAP 750 (like the Hurricane uses) that has WM6 and SDHC support. It is however not likely you find one :-(
If you like your Hurricane - don't worry. You can replace the PBA inside the Hurricane with a Tornado PBA without any other change to the device. They are 1:1 compatible (mechanically: identical size in any regard and electrically: LCD, keyboard, Camera).
So if you find a broken Tornado (no matter how worn or cracked) where the PBA is still alive - get it and give it a new live in your housing of the Hurricane.
Hey tobbbie!
Thanks very much for your reply! Und ach ja, ich bin auch Deutscher :-D
Hmm soooo, it would be very hard to find/create a driver for the Hurricane, right? But why are there topics with drivers made for the hurricane?
And otherwhise I'd have to open the phone and change the PBA with a Tornado one, right? But can I take that PBA out so easily? I won't have to solder or anything like that?
Again, thanks for your help!
Keyno(t)
There are no Hurricane specific driver threads. It is a re-use of generic WM 6 variant drivers on top of the low-level drivers.
And yes - if you manage to open the case (be careful when opening not to rip away the flex cables for camera and keyboard) then there is no soldering required.
Look up the service manuals for either Tornado or Hurricane (even Typhoon will do) to get an idea which screws to remove and how to remove the antenna cover. Challenge is to swap the LCD if you need to - some delicate handling of the flex connector as well there.
No impossible mission, but you need some mechanical skills and a rainy day without time pressure if you do it the first time.
Depending on your budget the cheapest solution may be to wait for a good opportunity on ebay to buy a used Tornado - they get sold for 20+ euros. If you do not need WLAN, then go for the SPV C600 (France) or the O2 XDA phone - but these are rare species these times.
Hmm at anyway I don't find anything in ebay I could need...
So you also said it could be possible to write my own driver? Is that true? And you know any How-To's that could help me a bit by this?
And really thank you for your help!
Keyno(t)
Finding this on ebay will require a few weeks - so be patient and keep on looking. How much would you want to spend for a Tornado (XDA phone - no WIFI, or the 8310 with Wifi)?
Regarding the drivers: Seems like you did not get the irony in my comments Writing low level drivers is something very special. It is virtually impossible to write a driver on your own - so forget this option!
Ouw okay, and yes I didn't exactly understand it
So I have only one choice
I think it shouldn't be more than 20€, max. 30€.
And could I really have also WiFi in my Hurricane, or why you ask all the time about WiFi?
I don't really need it, but if the price just change about 5-10€ I'd rather buy one with WiFi
And again: thank you very much for your help!
Greetings
Keyno(t)
Did you get it? If you replace the PBA - then you may still have the case of a Hurricane (despite in the US or China the same case carries a Tornado) - but the device is a Tornado then - bye bye Hurricane.
The Tornado was built in two flavours with and without Wifi - more common in Germany was "without" as the O2 XDA phone has no WLAN. The other device is the Qtek 8310 (also in silver as Vodafone VDA 2) which has WLAN. It will only rarely happen that broken devices are sold (people just put them in the waste or return them to the shop for recycling) - but keep on watching.
If you get a fully working Tornado I would not bother to replace the PBA but use it as it is - unless you disassemble it for fun and learning.
Okay thank you very much for all your help!
Now I got it
Greetings
Keyno(t)
...just to close the query: It IS (!) possible to have SDHC in the Hurricane working. read about it in my related kitchen thread (post 4) http://forum.xda-developers.com/showthread.php?t=1553132
Kitchen is not updated yet - but who cares anyway...
Related
As a regular contributor to various motor car forums I am always amazed at how idiots destroy perfectly serviceable cars in an attempt to 'improve' them. Anyway - today, I am one of those idiots.
I recently purchased a QTEK 2020 which I got a bit cheap on account of it not having 'iMate' written on it. Before I get really into it and put software and stuff on it, I'd like to upgrade my ROM from 1.66 to 1.72, which I have found on this site. Do I have to go through all of the xda2nbftool stuff (which I more or less understand)? Presumably yes, to change the Operator (only?). I'm quite happy for the machine to think that it is an iMate, but presumably this does not work!
I am happy with my machine. It hasn't crashed yet. But it annoys me that it might not be quite as good as yours...
(I so feel like one of those people who wants to remove his cylinder head and replace it with pineapple's to make the engine run sweeter)
i dont really understand what you are asking
are you asking
1 about changing operator and so sim locking ?
2 are you asking if you need the pretty manual xda2nbftool way to upgrade xda2's ?
3 are you asking if it will work upgrading to 1.72 ?
1 you can sim unlock your device without changing rom
a rom never require you to use a special operator but the preset settings will be the operators who put out the rom
2 yes currently it's the only way with time people are likely to make it a bit more gui like the xdatools for xda1
3 it should work but some people are reporting issues with it or maybe that was the beta of 1.72
read about the exp of others in the posts about 1.72
Sorry - it's a simple question.
If I had an iMate I could just use the RUXXX upgrade without any fuss to upgrade to 1.72
However, I have a QTEK 2020. I guess therefore I have to use xda2nbftool to modify the operator name to QTEK - otherwise it will not work (despite the 2 devices being identical). I do not want to unlock a SIM or anything else (it is unlocked by default).
Just looking for confirmation of the above paragraph!
I read about the experience of others using the 'official' 1.72 and it seems okay (better battery life etc.)
Cheers
there are 2 errors i think which stop people from just flashing their xda2 flavor with any rom update in the form of an exe file
1 is country code error if the rom is released in one country it often have a block which will stop people from upgrading their another country xda2 with it, not sure why they do that
2 maybe a form of device block so you dont upgrade your qtek with the imate
i'm sure if you had an imate and the country code dident differ you would be able to upgrade without using xda2nbftool
with time a GUI tool like xdatools for xda1 will come and you'll be able to get around all these blocks without having to type
and such
If you want to upgrade your Qtek to Imate's 1.72 ROM, yes, you need to do all that stuff.
It's actually quite simple, the description on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing is full, accurate, and is actually suited to Qtek owners without changing a single instruction.
I flashed my device (though on the first go it ended up in a dead-ish screen and I had to re-flash) and it works swimmingly.
However, you might get somewhat nervous encountering such dead-ish screens; and for good reason, flashing is dangerous after all.
Perhaps it's best to wait for a Qtek upgrade, they seem to be holding back a bit, so perhaps they're waiting to integrate WM2003 Second Edition, which should be a much larger upgrade. Also, you'll still be covered by warrantee.
If you're having specific problems with your 1.6x ROM, it could conceivably be a good idea to upgrade to the iMate ROM (using the instructions on the wiki), but if you're not having any problems, or problems that also occur in 1.72, or which are a result of 3rd party software you're using; don't bother.
You are right that QTEK seem to be a little slow in releasing anything. In fact I can't find any detailed 'official' support on QTEK outside the pages of this forum. Their website appears to be in swedish and is of very little use!
The QTEKCorporation website doesn't even list the 2020! Strange, as I understand that HTC own QTEK.
Most vendors (Expansys for example) list the 2020 as 'discontinued' (which is how I managed to negotiate a big discount!)
I tried to gatecrash club-iMate but they didn't like my IMEI number, and when I asked why not they said that they don't support my device.
I don't really care (assuming that my machine never has a problem...) and is it seems to do everything I want it to, I'll wait before updating the ROM. Maybe something will come from QTEK eventually - although I am not sure from where!!
Cheers
well qtek were the first ones out with 1.66 it came on my device before most people had gotten 1.60
beljames said:
As a regular contributor to various motor car forums I am always amazed at how idiots destroy perfectly serviceable cars in an attempt to 'improve' them. Anyway - today, I am one of those idiots.
Click to expand...
Click to collapse
Who am I to contradict you? ;-)
Seriously: don't do the upgrade yet. Why?
- 1.72 has well-known problems. First, ClearType has become much worse - text just doesn't look as good as with older versions. Second, quite a few people report hangs that needed a hard reset (and cause a loss of all data). See, for example, the pages 45 - 50 of the PocketZenPhone thread in this forum. With my ROM version (1.60) I never had to hard-reset a single time. And I tried quite a few programs, some less buggy, some more buggy.
- also, although there are detailed instructions, things can always go wrong. And if that happens, you may need a bit of experience to sort them out. So wait a few more week, enjoy your device, read forums, and gain experience.
Cheers
Daniel
I have 1.72 for some time now and:
- it *never* crashed (I have to do soft reset from time to time like in any other release though, but no hang or anything)
- clear type is fixed. There's a post about a .cab to install which fixes the problem. ClearType is now great on 1.72
- my battery life improved over previous versions and I have a unit that can stand up to three days connected to my BT headset (a bluetrek G2) with me talking 2 to 3 hours a day and doing PDA stuff
so I would recommend you move on
Hi beljames, really I can understand you! I've almost destroyed a lot of good working car engines trying to "improve" them... :lol:
So: if you want to do this with your brand new QTEK 2020 go there
http://forum.xda-developers.com/viewtopic.php?t=9060
and read carefully.
All worked fine for me. I upgraded from 1.66 ITA to 1.70 EN and my QTEK works perfectly!
About the cleartype problem you can find a fix in this forum: it works too.
I've also added a N2Ox system and a small turbocharger... it's a little bit heavier, yes, but it runs like a rocket! :lol: :lol: :lol:
Good balanced opinions!!
I think I'll wait a while to see if it annoys me. One single hang and I'll upgrade. Screw it up in Ghana and you don't get a lot of 1 to 1 technical support!!
By the way - I find it far easier to read the screen with Cleartype switched off (and mine is 1.66). Cleartype makes me squint!
An Loxodont - assuming that you are Italian, you will be amused to hear that the one car I used to lunch very frequently was an Alfa 33. Used to blow the inlet manifold clean off almost weekly.
- 1.72 has well-known problems. First, ClearType has become much worse - text just doesn't look as good as with older versions. Second, quite a few people report hangs that needed a hard reset (and cause a loss of all data).
Click to expand...
Click to collapse
in defence of 1.72 then i have had both these issues with 1.66
Go for it....
Hi all,
just to let you know I also upgraded my Qtek 2020 from 1.66 to i-mate 1.72 following the "manual steps" to overryde the country code error and it works fine. The steps are simplier than it seems and i did it in 5 minutes. The upgrade itself is quite boring....it took almost one hour to complete the upgrade on all stacks.
One thing i can tell you: after the upgrade the device gets faster and it seems it has a "new" battery.
The cleartype prob is solved and forgotten with the right patch.
The only problem i still get is the stupid i-mate logo at startup and i can't seem to get rid of it. I want my old qtek logo back....
If i can give advise on this: Just go for it.....
Portuguese do it better....and we will win Euro2004 !
The only problem i still get is the stupid i-mate logo at startup and i can't seem to get rid of it. I want my old qtek logo back....
Click to expand...
Click to collapse
maybe this guide can help you get your old pic or a new and more fancy one as bootImage
http://forum.xda-developers.com/viewtopic.php?t=3759
In last weeks i worked to unlok my wallaby, when i wrote xda-developers cooked version i discovered that test menu (when tou make a warm and/or cold reset) didn't work anymore. I 've been reading in this and other forums looking for solution in my hard purpose to use again my xda wallaby.
I used SD card method unsuccesfully. I can´t initialize OS and only i got it's a T-Mobile logo and starting these numbers:
G324e4
R6.25.02
4.01.16
i got anymore else... people say to me that using a serial cable and mtty11a.exe i would get some results but i'm building a serial cable because here in mexico, support and to buy international is not a good and cheap option.
Somebody tell me that i need a byteblaster cable to fix but it is a little bit confuse (too much!!!) for me.
I hope anybody help me please. I 've been reading a lot but or a'm a real idiot or this problem is in XDA play off's.
I think a lot of people have or had this kind of trouble and i think would be great build a solid tutorial to fix these structural problems inthe way to make less difficult its fix.
Thanks a lot....
excuse my bad english it is not my native language. :roll:
I have a phone here, the Niki touch dual with a qwerty keyboard. The device ID is NEON200 and im unable to to flash it? wrong device ID. There are many differences such as, the stilus is colapsable and goes in the bottom left, the usb is behing a rubber door at the botton of the phone, power button is on the right hand side of the phone, sim card enters a door under the volume button.
very strange, going to have to cook my own rom to get one in there,
for interest its Telstra Australia branded (one of our major phone carriers) and it supports 850MHz and 1200Mhz HSDPA and UMTS !
Dave.
http://www.theunwired.net/?item=approval-bluetooth-sig-approves-the-htc-neon-200-an-indication-for-a-umts-touch
yes thats the one, I have dumped the rom if any one is interested, with the exception of part03
so the variant that telstra is selling can not be flashed with new ROMs unless it is specficially designed for it?
It seems that HardSPL cannot be flashed unless the device ID matches. This makes the ROM flashing difficult if not impossible. Unless a HardSPL flash file could be customised to suit the NEON200 device ID I believe. I may be wrong, I am still new to this.
My advice would be to AVOID all rom's and tools designed specifically for the NIKE and wait until someone finds out more about the NEON
Dave.au said:
I have a phone here, the Niki touch dual with a qwerty keyboard. The device ID is NEON200 and im unable to to flash it? wrong device ID. There are many differences such as, the stilus is colapsable and goes in the bottom left, the usb is behing a rubber door at the botton of the phone, power button is on the right hand side of the phone, sim card enters a door under the volume button.
very strange, going to have to cook my own rom to get one in there,
for interest its Telstra Australia branded (one of our major phone carriers) and it supports 850MHz and 1200Mhz HSDPA and UMTS !
Dave.
Click to expand...
Click to collapse
Please dump the SPL:
pmemdump 0x8c000000 0x80000 spl-niki-neon200.bin
(pmemdump is part of itsutils by itsme, run it on PC with a activesync connection)
I will do, Ill get this phone back, its Danoss who owns this phone, see post no #5, here is the rom dump for anyone interested in adding it to their collection 57.8Mb RAR no password at
http://rapidshare.de/files/38517912/HTCNEON200_romdump.rar.html
Hi Jockyw2001, here is the dump you requested, Thanks for your interest!
http://rapidshare.com/files/90050852/spl-niki-neon200.bin.html
The SPL dump is okay. If I have some time left I will develop a SSPL and HardSPL for the NEON guys.
I think we need a new forum for NEON.
Different Hardware and same forum will be very confusing..
Like Elf an Vogue..
That might be a good idea, as it seems there is a new package in the same phone (nearly) and im sure it is going to throw off a few when they first start playing with it.
I would third that motion for a new NEON forum.
I support the new NEON Forum
Yes, my neon arrives today. I vote for a seperate forum also. Cut the confusion.
I agree with the new forum too. There are quite a few differences in the specs on these phones compared to the Nike/niki. After lugging around a Hermes for the last 2 years my wife loves this phone. Haven't told her theres no wifi yet.
Update: She knows about the wifi :-(
A few things I have discovered about the phone.
HHC (Htc Home Customiser) Doesn't work correctly. You can install and load it, change the settings but it never completes when you hit the save button.
CE Star Chinese character recognition and keyboard screws up the slide out keyboard functions.
Hi,
I have installed WM6 on my Qtek 8500. Is it possible to use SDHC 8GB microSD on it?
/JR
If you have one, try it out and see. Let us know if it works!
I tried my 4G card and it didn't work
Oh well. At least we know the answer to that question, the 3125/Startrek doesn't have SDHC hardware.
Jozer99 said:
Oh well. At least we know the answer to that question, the 3125/Startrek doesn't have SDHC hardware.
Click to expand...
Click to collapse
hardware isnt problem. you need new MicroSD-card driver
...and are the drivers available? Current WM6 devices all support SDHC.
Erofich said:
hardware isnt problem. you need new MicroSD-card driver
Click to expand...
Click to collapse
@JesperRas,
As Erofich notes, the many people have gotten SDHC to work on WM6 ROMs that didn't initially support SDHC by installing the right driver. See the following thread for a .cab file download that worked on many devices:
http://forum.xda-developers.com/showthread.php?t=310456&page=4
I think the original device this driver came from may have been a PocketPC, but I recall in the thread that it worked in some Smartphones too. The cab file was even reported to work on some WM5 devices, so I tried it on my WM5 StarTrek, but no workee. However, I think this is worth another try now that we have WM6 on the StarTrek (thanks Erofich, and everyone else who worked on this - you rock!). I have no idea if it is the "right" driver or not, but maybe worth a try. So, anybody feel brave today and want to try this one? I haven't had time to flash WM6 yet (gonna get to that soon), but if anyone gives this a try, please let us know how it goes!
When the cab file didn't work on my WM5 StarTrek, it also removed regular microSD from being seen. But I just uninstalled the cab and restarted the phone and regular microSD came back. So probably not a lot of risk to try this, but who knows...?
If anyone wants to try a ROM w/SDHC support, let me know. I don't have any MicroSDHC cards to try.
GnatGoSplat said:
If anyone wants to try a ROM w/SDHC support, let me know. I don't have any MicroSDHC cards to try.
Click to expand...
Click to collapse
i'll be a guinea pig for the sdhc test, GnatGoSplat. it's been fun to be able to do something with this phone again. it's been collecting dust since i picked up my kaiser.
I'll whip one up tonight.
I'd be happy to test it in a couple of days aswell, i've got a 6gb microsdhc in my kaiser and I've just bought one of these phones of expansys for £69.95!!! great value if you ask me, especially for just carrying for work when i don't need all the functions of my kaiser but still like to have winmo. anyway first thing i'm doing when it arrives (should be friday hopefully) is cid unlock and winmo 6 so might aswell kill 2 birds with one stone and test this aswell if you want
DTMc
Here's a first effort:
http://rapidshare.com/files/93338388/sdhc_test1.rar
It's based on the ROM with Cingular bloatware.
GnatGoSplat said:
Here's a first effort:
http://rapidshare.com/files/93338388/sdhc_test1.rar
It's based on the ROM with Cingular bloatware.
Click to expand...
Click to collapse
damn, bloatware
update: no go. finds a 1gb microsd, but not a 4gb class2 microsd hc.
try this
http://ren.redsys.ru/_private/WM6StrTrk/SDHC Support Kit.cab
only for wm6
hey, just to let you know, tried both sdhc cabs, (the one at the begging of the thread and erfich's SDHC support kit) and thats a no go on both. running Erofich's wm6 v5c rom, task manager just reads storage card, unknown unknown unknow, and file manager dosen't have any folder for memory card any more. normal sd still works fine with the cabs installed though.
Tested using a normal 1gb MicroSD and a 6GB class 4 microSDHC
Thanks
Damian
(also a big thanks to Erofich for the great ROM, and for try to help and to support )
I've tried experimenting with several other drivers from different devices and no go (many won't even read regular SD).
It looks like the possibility of SDHC on the StarTrek might be as hopeless as the Tornado.
damiantmc said:
I'd be happy to test it in a couple of days aswell, i've got a 6gb microsdhc in my kaiser and I've just bought one of these phones of expansys for £69.95!!! great value if you ask me, especially for just carrying for work when i don't need all the functions of my kaiser but still like to have winmo. anyway first thing i'm doing when it arrives (should be friday hopefully) is cid unlock and winmo 6 so might aswell kill 2 birds with one stone and test this aswell if you want
DTMc
Click to expand...
Click to collapse
369.95 FOR 6Gb is good? :|
I prefer http://www.mobymemory.com/products/...SDHC)-memory-card-with-Sandisk-USB-reader.asp
but as they don't work in the Startrk it's fairly academic...
lol no I think you've read me wrong, I paid £69.95 for my 8500, the 6gb microsdhc I already had out of my kaiser, bought that back in december for £32 delivered from moby memory. Works great in my kaiser and my nikon d40, but no go for the 8500 unfortunetly
oh well, keep trying and as long as we don't give up we shall find a way... maybe lol
Damian
That's right, let's keepour fingers crossed. Something might break very soon (not meant figuratively!)
damiantmc said:
lol no I think you've read me wrong, I paid £69.95 for my 8500, the 6gb microsdhc I already had out of my kaiser, bought that back in december for £32 delivered from moby memory. Works great in my kaiser and my nikon d40, but no go for the 8500 unfortunetly
oh well, keep trying and as long as we don't give up we shall find a way... maybe lol
Damian
Click to expand...
Click to collapse
lol - I thought it unlikely anyone hadn't heard of Moby! Just ordered a 2Gb card for my 8500 as nothing bigger works at the mo.
Hopefully one of the clever buggers on here will get them working!
Having read a lot of posts... both potentially apropos and perhaps diverse... from this August company of Ameo sages and mages, I have been moved to write to you to ask if there is something you can advise with respect to WM6 on our Ameo.
We have two such similar devices, both in T-Moble livery... with the nice leather book binding and the peculiarly useful pen pointer.
One arrived well-used with HTC Windoze mobile 2.21.405.2 on it, and the accompanying larger sized HTC home module, apparently of that period.
The other arrived practically new and boxed, with Windoze Mobile 2.35.110.4 on it, and the HTC Home characteristically implemented in the task bar area.
Being housebound disabled, the Tom Tom which came with it is virtually useles to me as well... so if anyone is desperately seeking one then we might arrange something.
The new unit came in and came up from cold. Not having a method whereby you can stop the branding process, as we do on our XDAIIs units, we were forced to permit that to continue... which was our first surprise. However that seems to bring in some benefits... in the shape of Opera and Tru-Flo... as well as a bit of T-Mobile dross too.
The HTC unit functions pretty well as far as I can see, and takes more or less everything you can give it to try. And it also starts on keyboard contact too.
The T-Mobile does not, and also needs to be re-set fairly often.
Too often for my money.
The HTC unit is unlocked as far as I know. The T-Mobile is awaiting a Pay-As-You-Go Card from me, and the use of the unlock code, which was obtained for us by the person who sold it to us.
The real tell for us (as mere users rather than mavens) was oddly enough, not with a performance tool kit or with any kind of enhancer, but with Hidden Expedition Titanic... of all things.
It works fine on HTC, but appears to glitch on the sound on the T-Mobile, and then hangs. Other similar softwares appear to do the same immediately after install, and then sometimes seem to operate as they should after a re-set. Astraware Solitaire WE and Robo, to name but two.
Going on from there, we got hold of Syberia. As big a test as you might want for this type of device I thought. That works pretty well again on the HTC, but inexplicably stalls on the T-Mobile far too frequently... necessitating a re-set. It is my impression that it does so if run from a previously closed session involving more or less any other task or purpose but can sometimes function adequately from a warm boot. (There are occasions with this unit when I'd like to implement the old MSDOS computer users saw... and give it a warm boot... AND also a HOT Wellie.)
Again, it is only my impression, but it seems that if I run Pocket Mechanic Ram Reclaimer on this unit, and then run Syberia, we seem to get a longer run without a freeze... sometimes to where I have to close in the normal course of events.
The same sort of thing... system hangs... happens now I have tried it... in Word. Especially when using Transcriber.
I have to say that I had perhaps unreasonably high hopes of that, having had a Toshiba Portege Tablet for a while now also, and having been quite surprised at how good the Tablet version of Windoze is at handwriting recognition on that. Most unlike Microshaft...
Then I thought that problems we had (and still do occasionally, albeit not requiring a re-set however) with the Tosh might be similar on the Ameo.
On the Tosh, as it arrived, we found the startup to be inundated with little Toshiba software modules... many of which were uneccessary. We improved boot times no end by taking a lot of them out... although live processing sometimes still has slow periods.
Notwithstanding however I tried to look at the Ameo in the same way.
In the startup there are around a half dozen files, aside from the obvious... Magic Button and X-Scalar that are there due to my efforts. And there seems to be little or no information as to what these are, or what they actually do... or more importantly... if they can be safely left out.
I've no doubt, from my reading here, that a simple answer from you all would be to install the unlocker and the forthcoming cooked ROM.
End of problem... perhaps.
However I tend to be a little more conservative (or timid perhaps?) with this concept... also noting those poor folks who have "bricked" their units too.
We have had excellent service from our XDAIIs units over the years, and they have been good companions when we needed them, as well as just phones. They are still operating with WM2002SE and still most software that I "find" seems to work on them... including the Ameo-Glitching Hidden Expedition Titanic I might add.
This week the chap next-door-but-one also got an Ameo... having seen ours and liked it.
His came out of the box with WM5 on it... possibly old stock?
However it set me thinking again and this has finally moved me to ask the assembled wise old Ameo-ers... if perhaps we would be as well reverting our new Ameo to WM5 too... for the time being at least... or if we might be better employed seeking something like the HTC version on our HTC unit?
Or perhaps some other solution presents itself to you from my description?
I'd like to get the new unit starting from keyboard connect also, if anyone has the fix.
The HTC unit came with a restore CD with WM5 on it... and not the HTC version which is presently installed on it's ROM. So I cannot just mirror it to the new unit.
There must be a concensus surely?
The units are manufactured similarly, by the same processes, and using basically the same internals.
We need a windoze version for these which settles down and does what it is supposed to with most of the software that is available.
At the present moment I have "ancient-egyptian" XDAIIs, which seriously outperform at least one new Ameo... in most respects... and that can't be right.
QF
Ameo
XDAIIs
HP Jornada 720
Atari Portfolio
Cliff Notes version? In 5 sentences or less, what are you asking?
Cliff Notes?? Who he??
I want the second to run as well as the first... and I'd like to know why it doesn't.
QF
techntrek said:
Cliff Notes version? In 5 sentences or less, what are you asking?
Click to expand...
Click to collapse
quinbus_flestrin said:
Cliff Notes?? Who he??
I want the second to run as well as the first... and I'd like to know why it doesn't.
QF
Click to expand...
Click to collapse
Hi
I feel you have lots of time to write on here. therefore you must have time to read about these threads before you try to mirror anything. If you do not understand fully you may brick your ameo.
To unlock the CID: http://forum.xda-developers.com/showthread.php?t=315831
Read the above thread fully
upgrade the radio: http://forum.xda-developers.com/showthread.php?t=372904&highlight=radio
Upgrade to AP3 DUAL Rom: http://forum.xda-developers.com/showthread.php?t=346221
Both of your devices need to be unlocked if you want to upgrade another rom other than original ones. If you do not understand clearly please do not do any changes and read everything about athena.
Good luck
Microshaft Windoze,that's great.