Related
Hey guys and gals,
In desperate need of help. Tried to upgrade my himalaya with the Asia O2 XDA II WM 2003 SE Upgrade.
Upgrade was unsuccesful; upon turning on the XDA there are only two things on the screen; near the top, it says 'Serial", and near the bottom, "v 1.06".
The xda will not respond to hard resets nor soft resets. What can I do to recover from this disaster? When cradled, it will not connect via usb to activesync.
If this is not user servicable, does anyone know a good place in Melbourne, Australia to fix the himalaya?
Any help is appreciated!
When it's docked in the cradle, does SERIAL change to USB?
Try this:
Take out the memory card (if you have one) and the battery. Not sure why the memory card, but mine had problems with it in when I tried to upgrade.
Wait 30 mins or so for the battery backup to flatten/wipe everything (You loose everything on a ROM upgrade anyway)
then plug the battery back in and recradle it and simply try starting the flash again.
I've had similar problems, but this has always worked here and we have different devices, but I feel confident that the same solution may work.
had the same problem... my solution was docking it in the cradle (it does not show connected) and reinstall the ROM
Failed upgrade of XDAII
Hello I was in the process of updating my XDA rom and after 50% was copied to the device it dropped out.
Now when I power on the XDA it hangs on the O2 screen and my rom flash program cannot talk to it.
I have tried taking the battery out and leaving it for an hour but this has no effect.
Any ideas?
Installing rom from the SD card on boot
Is it possible to do this and if so how would I go about it?
If I cant get an OS on it its going to have to go away for repair for 3 weeks.
Also have you done a few upgrades on your XDA2 and on the same PC?
I had the same issue with my XDA2 as I was upgrading to 2003SE (before getting a 2i) and I could not get any further than the USB 1.01 screen.
I installed Activesync on a laptop, put the USB in and put my 2i in to complete the installation. Then, I put the 2 in and tried rerunning the upgrade...worked first time! I'd spent 6 hours on my PC trying to get it working.
Worth a try, certainly!
Cheers
Anthony
screen shows USB at the top and v1.06 at the bottom. HELP !!
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
forgot to mention that I tried the things posted earlier !
I tried taking battery out for 1/2 hour and then the hard reset. Still nothing
Help !!!!
My wife is going to kill me because I just bought this XDA 2 and now it is dead ! (like me soon !)
disastrous xda upgrade
try consulting dr. stein or toenailed or xda jojo and zeroxtreme. these are the tech guys in southeast asia. they're very good! :lol:
Have you tried rebooting into Bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time), then trying to rerun the upgrade?
Re: screen shows USB at the top and v1.06 at the bottom. HEL
maij said:
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
Click to expand...
Click to collapse
When you started the upgrade did all seem to go as planned? Did you have the power cable plugged in whilst upgrading? Did you notice any strange messages when it started to upgrade, and how far roughly did it get before you started having problems?
Also, what was the software version before you upgraded? Any ideas?
Cheers
Anthony
Hi Anthony: Everything seem to be going ok and then..
the screen went blank. I did have the AC plugged in during the attempted ROM conversion from Chinese to English and I tried rebooting into bootloader mode and nothing.
Do you think my 02 XDA2 can be fixed ?
Thanks
downgrade XDAII failure
Pals ,
I also facing the same problems , now my XDA II is blanked and only
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ?
thanks
if the screen shows you something like serial1.something you're still okay. do a couple of hard resets; then put the unit back on the cradle. as expected activesync will not recognize the device BUT double click the upgrade file again.
this happened to me when i went to wm2003se; forgot to do a soft reset and proceeded with the upgrade. what i did was uncradled the unit, did a hard reset (screen still showed serial1.06), cradled her back (nothing happens here) then doubled clicked on the upgrade file. it proceeded accordingly until the entire process was completed.
dont' fret, as long as something's still showing on your screen you're still a-ok.
Thanks Robs..
I will try...
Yeah, after hard-resetting the unit, it seems that it did not reset because the serial/usb letters & v1.07 at the bottom of the screen is still there. But if you drain the battery, then put it back in the cradle & restart the ROM upgrade, it will work. At least it did for me.
As I've also said but seems to have been ignored, try running the upgrade on a different PC...you may be surprised!
Cheers
Ant
thanks Anton ...
I tried so many times in my pc until the sync wont work anymore , so i tried to do at my laptop ... still same .... should i change to another pc again ? pls advice , thanks man.
Dear O2inCN
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Re: Dear O2inCN
sbudiarta said:
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Click to expand...
Click to collapse
Hi, did you manage to downgrade to WM2003? Was your bootloader version 1.06? I had problem in downgrading from WM2003SE. Hope to hear from you. thanks.
Hi Mods and all
I am new in this forum .... and new with PDA in general ,.. although i have experience in regular cell phones ,,,
I have come up with an issue that i need help with from you guys who seem to be experts...
I have an XDA Atom which turns on upto O2 screen and freezez right there .. i tried to hard reset the phone but failed..
When i press power on and reset button .. screen asks me to press green and red key when i do it says clean boot .. and than do u want to reset your phone ? and than after that i tried to press all keys but nothing happens ,,,
I dont know wht is the problem but i think or assume that i have lost bootloader and or Rom ,,, Please help with this part
Also what tools do i use to flash what i have to flash as the PDA cannot connect with the USB becuase it is not turning on ,,, Please help with this part
Also what do i need to flash to this phone to revive it ,,,? please help with this issue ,, and where can ii download this files ,,
please explain step by step and or direct me to a link where i can geet this information
thank u in advance ,,,
Mike
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Drat. Got to this one too late. Sorry
Anyways, the Atom does have the tendency to lose track of its own extended ROM (You can actually see this happening if you use the WM5 hidden storage revealer - which ironically happens to cause the problem sometimes as well).
Symptoms include:
- A phracking long boot time (>7 minutes, seems to hang)
- Screen goes out of alignment
- Camera, Autoconfig, Equalizer don't work.
- Hard reset doesn't help.
- EXTROM info is missing from device settings (shows as blank) - tho sometimes the device works without this anyhoo.
- CMOS version is also missing (the device definitely won't work in this case)
Probable cause:
- Someone or something just tried to write to your hidden storage root. (Eh?)
Far as I know there's no method to recover other than flashing your phone again. Just one of the design flaws of the Atom, I guess...
(Yes, I feel for you. I had to solve this myself too, and I didn't want to send it in. Thankfully, this isn't a common problem. )
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
would you plz tell here which rom u used for this ????????
Well, my Atom Exec will do the same sometimes.
But the following method works everytime!!!
Take out the battery. Charge it with a charger until full !!!!
Put it back to the machine, it works every time !!!
Or you may try just charge it in the machine for a few hours and see if that works. Since I always have a spare battery charged, every time that dumb thing stuck, I just changed the battery and it waked up again.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
Hi mun66;
I've got the same problem with my Atom. But I dont know how to flash the phone like what you mentioned. Could you plz show me step by step??
Thanks,
Your ATOM Exec
edunon said:
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
Click to expand...
Click to collapse
You guys just need to go into bootloader mode before performing an upgrade. For the XDA Atom just press Power+Dpad(center)+stylus reset momentarily, and its now in bootloader mode. RUN again the Update program. If you still experience the same thing, the update file you downloaded might be corrupted. You have to download again and flash your device again.
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
wilak81 said:
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
Click to expand...
Click to collapse
You might want to send it in the the service centre for a check, just in case it's a hardware problem.. If you still face the same issue even without installing any software..
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
wilak81 said:
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
Click to expand...
Click to collapse
Do keep us posted..
I will face the same problem if i install too much programs.. I guess it's either Pocket Plus, Diary 2 which is causing my problem.. Now wondering if i should change to Atom Life, since they announce WM6... If only there's a perfect phone.
Thank God, it's working after 5x flashing but it still had bug.
I still have to take the battery off for at least 15 minutes if I try to reset the Atom.
Sure 1 thing for ATOM, IT SU**S!!!
i have a friend also has a trouble like this ,but he has solved the problem when he charged the exec. do not you have a try ?
I just picked up one of these to play with.
Mine gets by the O2 screen but if I have a few apps on it it loads the Today screen but then freezes and won't let me access anything either by hard key or screen. Soft reset just repeats the cycle.
This is with only around 4 apps loaded. One of them must be a culprit?
By the way, it came shipped with WM6.0 (ROM: WWE_RC2170507B2).
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dioxda2 and claudy fa for such hard work Thank you guys,
crazy_luv said:
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dia_dxo and claudy fa for such hard work Thank you guys,
Click to expand...
Click to collapse
..
..
..
Please check you battery..
..
..
..
what do u mean by checking my battery it's fully charged 98%
crazy_luv said:
what do u mean by checking my battery it's fully charged 98%
Click to expand...
Click to collapse
1. How long have you been using your battery?
2. 100% charged is not equal to a healthy battery,
3. normally, the longer year the battery you use, the weaker the battery performs.
4. just .... if you have the other new battery, test the result, or
5. you can also check if the your problem will be the same if AC charger is plugged.
just wanna assist.
1. i have been using my battery for 2 years.
2. battery lifetime varies from 1.5-2 days.
i dont have my AC charger close, so do u know another way to check battery health ?
crazy_luv said:
1. i have been using my battery for 2 years.
2. battery lifetime varies from 1.5-2 days.
i dont have my AC charger close, so do u know another way to check battery health ?
Click to expand...
Click to collapse
1. you may connect the usb power to make a softreset, and to see you problem exists or not,
if no more problem, that means the battary MAY BE not healthy enough to bear the
high(for micro electronics) electric consumtion for prophet rebooting.
Good Luck. Just one of the ways to find your answer logically.
By the way, for monitoring your battery, you may use the battery status.
I can't help you with the boot issue, but your DTMF problem is already covered in the CE thread. Just open that thread and use "search this thread" from the top-bar using DTMF as keyword. Your answer will be presented within a split second.
SUCCES!
As for your dialog with dioxda2, I think you are talking about totally different things......
rondol1 said:
I can't help you with the boot issue, but your DTMF problem is already covered in the CE thread. Just open that thread and use "search this thread" from the top-bar using DTMF as keyword. Your answer will be presented within a split second.
SUCCES!
As for your dialog with dioxda2, I think you are talking about totally different things......
Click to expand...
Click to collapse
Dear rondol1,
He has 2 problems, I am helping only one of them (not rich enough..... )
and you, you had completed his answers.
dioxda2 said:
Dear rondol1,
He has 2 problems, I am helping only one of them (not rich enough..... )
and you, you had completed his answers.
Click to expand...
Click to collapse
Together we will manage... But you are talking about battery condition as a solution for his "stuck in bootloader" problem? I am under the impression that you misunderstood his question. But then again, it could also be me who misunderstood!
I think the 'battery' may be something to do with the power provided by the USB port.
Try entering bootloader with the AC supply in.
RE:1. am not able to send DTMF during the phone call
crazy_luv said:
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dioxda2 and claudy fa for such hard work Thank you guys,
Click to expand...
Click to collapse
About this "1. am not able to send DTMF during the phone call "
try to find in registry this key (EnableDTMF) and change it to 0
i know is very strange, but it works...
hi
i recieved one xda atom black from my friend and this atom is facing with unkonwn problem after upgrading to wm6
the problem is hanging after going to standbye mode
when u i want to wake uo device with pressing power button my device goes to hang and it need to replace battery for coming back to life.
i changd rom but result is same.
i read many treats in here i think with replaceing eboot file then i can fix it
any comments?
thanks
KEYVAN-GSM said:
hi
i recieved one xda atom black from my friend and this atom is facing with unkonwn problem after upgrading to wm6
the problem is hanging after going to standbye mode
when u i want to wake uo device with pressing power button my device goes to hang and it need to replace battery for coming back to life.
i changd rom but result is same.
i read many treats in here i think with replaceing eboot file then i can fix it
any comments?
thanks
Click to expand...
Click to collapse
I had the same problem. My only solution - was to buy a new phone. I tried everything, including:
Downgrading to WM5
Upgrading to WM6
WM6.1
Chinese WM5
Arabic WM5
Slowing processor down
Speeding processor up
Opening it up and cleaning all contacts
same with my friends ATOM, any solution yet? this thread was from last month of march.
please help!
please can someone HELP me by sending me the instructions how to restore dead bootloader on my O2 atom life after a failed WM6.5 upgrade.
the device is not switching on, not entering bootloader screen.
when the battery is inserted and charger connected, orange led light is lit
PLEASE HELP, i love my atom life
pblair said:
please can someone HELP me by sending me the instructions how to restore dead bootloader on my O2 atom life after a failed WM6.5 upgrade.
the device is not switching on, not entering bootloader screen.
when the battery is inserted and charger connected, orange led light is lit
PLEASE HELP, i love my atom life
Click to expand...
Click to collapse
Please describe what you can see now in the screen of bootloader.
I think I've faced the same problem on my Atom Life before(my device has been dead(due to flashing error), but then cured by myself)... Maybe I can help.
check the site's wiki
there should be something about this.
additionally, have you tried the mini sd card flashing method (you can enter it's bootloader by holding the camera button - if thats the bootloader you're not talking about)
help me to revive my dead o2 atom life
my o2 atom life is not going in bootloader mode after mismatch rom upgrade(it has complete black sceen, i tried all buttons and battery remove and reinsert). please help me
you bricked your device .... try to open the device and remove this "cmos" battery
TRY THIS
manmohan0339 said:
my o2 atom life is not going in bootloader mode after mismatch rom upgrade(it has complete black sceen, i tried all buttons and battery remove and reinsert). please help me
Click to expand...
Click to collapse
hi manmohan
First thing Dont Panic. There could be several things which might be responsible together making things difficult and confused.
1) Battery have not enough power.
2) Rom installation failed in the middle due to ROM file corruption.
Possible solution (Worth trying out)
----------------------------------
1) For first thing to confirm. Keep battery on charge for 1 hour though nothing is on screen. This will charge no only the main battery but also the internal CMOS battery, which is important. The redlight of charging will show that phone hardware is charging your battery. You are done with BATTERY.
2) Download fresh copy of any compatible rom on your pc. Connect any USB CARD-READER to your PC. Format SD Memory Card in FAT format (also known as FAT16) on your pc. Be sure the card is less than 2GB. If its 1 GB it is better. Copy the AL1.DIO file on SDCARD. You are done with SDCARD.
3) Try installing ROM exactly as mentioned in this THREAD
4) If still this fails, that means your battery is not yet fully charged or not working properly. Go to any mobile shop and ask them to charge the battery to full with thier charging unit and again start from step 1. Also ask the mobile technician if your battery is fine or not.
If battery is above 70% and card is FAT and ROM file is not corrupted, the installation again will go fine and you will be with your mobile again.
THIS MAY HELP, I M NOT SURE, BUT WORTH TRYING OUT THESE BASIC STEPS. HOPE THIS HELPS.
BEST OF LUCK...
Mahendra C
Mumbai, India
can you tell me the steps you took to cure your atom life.....thanks for your help
aa125690 said:
Please describe what you can see now in the screen of bootloader.
I think I've faced the same problem on my Atom Life before(my device has been dead(due to flashing error), but then cured by myself)... Maybe I can help.
Click to expand...
Click to collapse
i am not getting to the boot loader screen at all. when i press the power button, it phone doesnt power up.
when i connect charge...the amber light blinks and when remove charger its the same until battery runs out.
greatly appreciate your help
pblair said:
i am not getting to the boot loader screen at all. when i press the power button, it phone doesnt power up.
when i connect charge...the amber light blinks and when remove charger its the same until battery runs out.
greatly appreciate your help
Click to expand...
Click to collapse
Try charging your battery until the amber light turns green (it means it is fully charged).Then try to do a hard reset (pressing the power and reset button simultaneously). It will bring your phone to the last ROM that was installed.
Dear ManMohan
No need to send private emails. May be you are assuming most of us as mobile hardware experts but trust me many of us are not. I am just trying to help.
I am sure, you are very near to solution which you can do on your own. And yes, discussing all this in forum, will help many other people too now and in future, than in private emails.
--------------------------------------------
Try to find Original ROM from O2 website here http://www.myxda.com/romupgrade.aspx Select Atom Life and download Rom Installer for XP version and VISTA version both. Write them on blank CD for future reference, just in case you may need in future. DOWNLOAD THEM AS SOON AS POSSIBLE BEFORE THEY CLOSE THE SITE AS O2 IS ALREADY TAKEN OVER BY MWG (www.mwg.com)
Try installing this official ROM from your PC with this installer, while your O2 Atom life connected to PC with USB Cable. Even this method also restores many phones from boot error.
Hope this helps. Best of luck.
Mahendra
same problem
I have the same problem. what happens is that i include eboot.nbo in the mini sd. when flashing is done, i have a dead set.
searching for jtag what I found is that the software out there that is compatible for exec and flame. when used with life will result with errors.
also trying some key combinations but never come up with flashing/boot screen.
same problem
asunta said:
I have the same problem. what happens is that i include eboot.nbo in the mini sd. when flashing is done, i have a dead set.
searching for jtag what I found is that the software out there that is compatible for exec and flame. when used with life will result with errors.
also trying some key combinations but never come up with flashing/boot screen.
Click to expand...
Click to collapse
hi,
can you give photo showing jtag poins for atom life and how to prepare its cable, i want to try for my dead atom life.
juliuscezar said:
Try charging your battery until the amber light turns green (it means it is fully charged).Then try to do a hard reset (pressing the power and reset button simultaneously). It will bring your phone to the last ROM that was installed.
Click to expand...
Click to collapse
i charged for 3 days and the orange light just keeps blinking...do you have any more ideas i could try
aa125690 said:
Please describe what you can see now in the screen of bootloader.
I think I've faced the same problem on my Atom Life before(my device has been dead(due to flashing error), but then cured by myself)... Maybe I can help.
Click to expand...
Click to collapse
after charging phone....i remove the battery and replace and when i press record+camera buttons + power and reset the orange lights comes....does this info help in you helping me
Yap Atom Dead bootloader is very annoying
Almost 1 year my Atom life dead or brick.I already Searched even to Service Center in our country and Atom central service in Singapure and china but none of them can fixed this this problem. They Said : "The Only way for fixing this brick atom life just Replace mother board".The Atom which has dead bootloader can not fix with Just press whatever button in your atom or even install New ROM.Cause the one of term for installing the new rom to The ATOM life is port must be detected by USB Computer port.But in this condition your atom life nothing detected by USB Port computer.Reasonly you can not nothing to do.But FYI if you have contact person in China precisely in Quanta Computer Manufacturer especially in Maintenance or engineering, I think there's only hope.But In the world there's nothing imposible to do.Until now I am still keeping my brick atom dead life, waiting someone can solve this problem. many thx.
jtag
blankavail2009 said:
Almost 1 year my Atom life dead or brick.I already Searched even to Service Center in our country and Atom central service in Singapure and china but none of them can fixed this this problem. They Said : "The Only way for fixing this brick atom life just Replace mother board".The Atom which has dead bootloader can not fix with Just press whatever button in your atom or even install New ROM.Cause the one of term for installing the new rom to The ATOM life is port must be detected by USB Computer port.But in this condition your atom life nothing detected by USB Port computer.Reasonly you can not nothing to do.But FYI if you have contact person in China precisely in Quanta Computer Manufacturer especially in Maintenance or engineering, I think there's only hope.But In the world there's nothing imposible to do.Until now I am still keeping my brick atom dead life, waiting someone can solve this problem. many thx.
Click to expand...
Click to collapse
I am building jtag hardware. I will try to flash boot loader using linux taken from this site.
HTML:
http://www.nrs.pt/pub/projects/acuv2/doc/mel-colibri/html-chunk/mel.bininstall.html
It is also possible to use windows, but some parts of the program is missing. Still, I am having a hard time to build the jtag hardware, taken some parts from nokia dct3 flasher.
Had the same problem and after about 15 days of its brick status I took it out and charged and after 100 % charged installed the official "Xda_Atom_Life_WM6_WWE_RC2140907B2" and then subsequently the PDAVIET ROM 6.1 with AL1.DIO.
can you explain the procedure in detail.?
Carbideman said:
Had the same problem and after about 15 days of its brick status I took it out and charged and after 100 % charged installed the official "Xda_Atom_Life_WM6_WWE_RC2140907B2" and then subsequently the PDAVIET ROM 6.1 with AL1.DIO.
Click to expand...
Click to collapse
please explain in detail, how did you repiar it ? where you able to go in bootloader mode?
JTAG
asunta said:
I am building jtag hardware. I will try to flash boot loader using linux taken from this site.
HTML:
http://www.nrs.pt/pub/projects/acuv2/doc/mel-colibri/html-chunk/mel.bininstall.html
It is also possible to use windows, but some parts of the program is missing. Still, I am having a hard time to build the jtag hardware, taken some parts from nokia dct3 flasher.
Click to expand...
Click to collapse
I think the problem not from the JTAG Software.Officially Intel PXA 270 can be flashed by reguler flasher software with jflashm or even HJTAG and I already read detailly in the intel section site,but we can not find the right position so we can not flush directly eboot this processor.Now I am unfolding this atom for searching The right JTAG Position.But I don't know how identify this jtag point.In this side board there are many point, I think I must try one by one, do u have any idea?
help
i also have same problem... my atom life brick...i cannot power on at all.. nothing appear on the screen... i have done the charging tricks.. please help me