Related
Hi to all, my problem is that I can't enter the bootloader. in other words I can enter it(power+navigation buttom and reset) but i only see the word Serial and v1.01, and when usb is connected I see USB v1.01 , i can't see d2s or any other information and options. I wanted to flash my rom to SD using Multi-Port/USB TTY . I did a search on this forum but no luck so if anybody can give me a hand I'll appriciate it. Ciaoz Mine is XDAII the german verwsion.
Please anybody can give me a step by step info on how to copy the original rom to SD card, I need to change language from german to english and I want to keep the original german rom just in case. Thx
Does it have to be on sd there are other way of doing it which I will be able to talk you through (I think) if you need a hand
Well I was thinking to flash it to the sd in case the phone goes dead and you're out of activesync so the only way of flahsing it will be through SD. But another way of flashing is more than appriciated so I'll be waiting for ur guide.. do u happen to know why I can't see the options in the bootloader? thanks really
1st ... I have no idea why you cant get into the bootloader. On my xda 2 after a cold reboot i just get the serial and then when in the cradle I get usb, from their I dont know what to do. I would class myself as a newbie as well but I can talk you through what I did.
Which rom is it that you want to flash?
The extended rom or the Os rom?
i'm willing to flash the OS rom and not the extended. My version is 1.03.00 Ger and I want to flash to the "Dangaard (Qtek) 1.60" or RUU16006WWE_T-mobile_NL version which is an english one although I heard some people had their phones dead while doing so. I must find a way to back my rom 1st.. Did u do the update urself??
Yes I did the update using a programme called
HimaUpgradeUt.exe
I was originally after flashing the extended rom only, but due to not fully understanding the instructions at
http://forum.xda-developers.com/viewtopic.php?t=6470&highlight=
I made a mistake and flash the Radio Stack - the OS and the extended rom as well. After this I worked out how to use HimUpgradeUt.exe to flash the extended rom only. I am guessing that if you follow the same procdure for flashing the rom and flash the OS you will get the same results.
However I haven't tried it yet. I am hoping to get the radio rom and the OS rom for O2 xda2 and try it but until them I cant confirm it. I am only guessing that it will work?
So its up to you I have successfully updated the extended rom 4 time but I just dont have the files to do it?
Where did you get you Os file from?
I already tried Multi-Port/USB TTY program , but in the instructions it says"
3. boot the machine into bootloader mode (hold the Power and directional pad , then push reset)
4. Run the rompdate utility, select the comport as "wceusb001" or something like that as the default comport." The problem is that After going into bootloader mode I launched the romupdate utility but in the com-ports I only see com1 and com2 ,there is no wceusb001!!. And where did u see the d2s that I hear about??
I've got the downloads from the forum this one http://forum.xda-developers.com/viewtopic.php?t=6214&sid=0dad85b97d280219dc51962a01a4997b and the other form here http://shop.store.yahoo.com/cellpoint/tmobilemdaii.html
It seems that we are taking cross purposes here.
Using HimaUpgradeUt.exe you can update the roms using .NBF files,
hence the way in which I updated all 3 of my roms in one go.
Radio.nbf
Ms.nbf
Exteneded Rom.nbf (can’t remember the actual name) it looks like you are using a different up loader or have different files to upload. I can only really help with advice on the process that I followed. I can provide you with the files that I had, if you want it will change your 02 format to I-Mate in English.
Does this help?
well I know we have differnet purposes but we should use the same tool I guess if we followed this link. http://forum.xda-developers.com/viewtopic.php?t=6470&highlight= and the tool is Multi-Port/USB TTY program to back up rom or extended rom. Please provide me the info to back up the rom no matter if to SD or HD. Thanks for ur time man.
I think that you can try using ositools I will find the link and then post it, but again I am still not sure how you reinstal it afterwards
whafni77 said:
Hi to all, my problem is that I can't enter the bootloader. in other words I can enter it(power+navigation buttom and reset) but i only see the word Serial and v1.01, and when usb is connected I see USB v1.01 , i can't see d2s or any other information and options. I wanted to flash my rom to SD using Multi-Port/USB TTY . I did a search on this forum but no luck so if anybody can give me a hand I'll appriciate it. Ciaoz Mine is XDAII the german verwsion.
Click to expand...
Click to collapse
I am in the same situation with you, have you solved yet?
Serial / USB V1.01
I had the same problem, and I found the cause to be a USB Hub. I found that when I plugged the cradle directly into my PC I managed to load the update without any further problems.
I hope this helps
you have to disable usb or com port in activesync, before trying to connect with mtty, or terminal program.
see http://wiki.xda-developers.com/wiki/HimalayaBootloader
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
@all
anyone have a solution on how to downgrade rom..
i have a ATOM and upgraded to ATOM EXEC rom..
theres some guide in here but its inside of other thread and its not working..
please help us..i know im not the only one have a problem like this..
thanks in advance..
-=[serialzs]=-
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
jiggs said:
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
Click to expand...
Click to collapse
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
serialzs said:
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
Click to expand...
Click to collapse
press camera+reset button. you should see bootloader screen. From here, upgrade using the procedure I discussed in the aku3.3 thread.
cheers,
Jiggs
thanks for the help but i figure it out on my own now..i done it with something i dont think earlier because im too excited..hehe..
now i have a atom rom back again..
i will guide people have same problem..hope i can help..
-=[serialzs]=-
o2 atom upgrade problem
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
all_brother2002 said:
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
Click to expand...
Click to collapse
what version of atom exec you use?
-=[serialzs]=-
Well, I managed to downgrade my ROM back to the original Atom (my sig isn't updated - had problems with the extROM wiping itself) - but I was kinda lucky.
Y'see, the AE hack rom I use has an updated bootloader that won't let you do a USB firmware update unless you're activesync'd.
The only way to solve an ExtROM wipe was to reflash the device, so I did. Using the hack ROM DSUU - at this point, the original ROM won't recognize the device - I found that it usually takes a few tries for the extROM update to go through (extROM format fail) - when it fails, your phone will be stuck in bootloader (Connect a USB cable). Repeated attempts to flash the phone solves the problem.
So when my extROM inevitably disappeared again, and I hit the extROM format fail again, I decided I had enough and tried using the original Atom0426-0822 ROM.
It went through this time.
Seems that the only way to bypass the bootloader lock is to semi-brick your device. >_>
Just a question to all of you who are more experienced than me
I want to change my atom exec wwe to cht, can anyone tell me how to bypass the device country id error. do i use an spl? and are these spl programs device specific? or do i use the bootloader mode? Can someone explain that to me?
Thanks all in advance.
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Ultimate Chicken said:
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Click to expand...
Click to collapse
Strange, i already did that, and got the "0" from DSUU, but when i start upgrading, the bootloader spits out a message saying that i should connect with OS mode.
Anyway, I've edited the diskimage_Ver.nb0 file to do it.
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
bedav said:
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi guy the main key on the file call EBOOT everytime when you want dowgrade your OS to normal ATOM just put this file to you SD card then use the bootloader mode you can see "imge downloading" just wait for a second it will reboot again . then you can use the DSU mode to flash your device
thats work !
Thank you very much !
HELP on my atom exec
w/o reading, i downgraded my atom exec to atom...
hw can i bring back my atom exec default WM5 ROM?...
am planning to upgrde to WM6 aftr...
Hi Jiggs,
Really really need your help...
I've accidentally flashed my O2 atom life to a wrong rom, and it was recovered by a rom named AL1.DIO & ExRom.img which downloaded from xda FTP sites.
The rom was recovered,however for the warranty reason i need to flash back to O2 original firmware. And when try to flash to it I encountered "Wrong Customer ID", can you advise how to bypass the CID check and flash to original ROM?
I've tried on the post stated on http://forum.xda-developers.com/showthread.php?t=293632 but the screen didn't show anything after execute the .exe file.
I do not wish to unlock the CID just intend to bypass it, can you enlightened me?
Your help is greatly appreciated.....
First off sounds like you have some idea what you're doing? (bootloader working?)
Secondly there is no jiggs anymore, he's gone, retired, moved on!
Last but not least he left a torrent of info in the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Atom start here and read, you may find a solution! good luck bro!
homer285 said:
First off sounds like you have some idea what you're doing? (bootloader working?)
Secondly there is no jiggs anymore, he's gone, retired, moved on!
Last but not least he left a torrent of info in the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Atom start here and read, you may find a solution! good luck bro!
Click to expand...
Click to collapse
Hi bro,
Thanks for the quick reply.
I'm so sorry I'm a newbie didn't know bout Jiggs already retired
Btw I still manag boot into bootloader, the problem is due to the warranty reason, i need to dump my atom life back to its original state before i send in.
Now I'm still able to use the phone, it's just not in original rom.
Had tried to look around the thread you post to me, but i couldn't find any solution at all. Sigh, hope that someone can englighten me as i totally lost...
so you get the "CID error", whether you flash in bootloader or DSUU mode correct?
what is your bootloader version?(if not original Atom Life?)
<-and have you tried the EBOOT SDCard (this may not work for Atom Life) method to restore bootloader if not as stated above?
homer285 said:
so you get the "CID error", whether you flash in bootloader or DSUU mode correct?
what is your bootloader version?(if not original Atom Life?)
<-and have you tried the EBOOT SDCard (this may not work for Atom Life) method to restore bootloader if not as stated above?
Click to expand...
Click to collapse
Hi bro,
My boot loader version is H3 - v0.79.
try both either to flash the official O2 rom from bootloader or window both are encountered 'Error - Customer or Model ID error'
Still have any solution?
Many thanks at all...
Cheers!
kenzojoey:: don't worry. its v simple. first connect USB, enter boot loade, RUN ur Upgrade, after finishing extrect, last STEP "NEXT" to strat up grade, after clicking NEXT immediately press u,r Keybord "DOWN ROW" it will work. good luck
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Please help me..!!!
Please help MODS..!!!
Also tell me how to use .NBH files for GENE I mean is CUSTOM RUU is ok???
& if yes then which of the 6 options is to be selected..!!!
I am using VISTAS...!!!
sugestion
hi
as per ur nos giving it is a old gene(SPL 1.10.Olip is for old gene see my sign) my suggestion is
go to the link below download the ROM for OLD GENE also download a new ROM utty besfen ROM comes with the utty u can also use these roms for ur Gene see 2nd link provided i think ur existing Rom utty is corrupted
besfen has also provided original wm6 u can also try that also
good luck
http://forum.xda-developers.com/showthread.php?t=467796 - Krazy ROM
http://forum.xda-developers.com/showthread.php?t=505156 - Besfen ROM
heartsurfer008 said:
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Please help me..!!!
Click to expand...
Click to collapse
haree said:
hi
as per ur nos giving it is a old gene(SPL 1.10.Olip is for old gene see my sign) my suggestion is
go to the link below download the ROM for OLD GENE also download a new ROM utty besfen ROM comes with the utty u can also use these roms for ur Gene see 2nd link provided i think ur existing Rom utty is corrupted
besfen has also provided original wm6 u can also try that also
good luck
http://forum.xda-developers.com/showthread.php?t=467796 - Krazy ROM
http://forum.xda-developers.com/showthread.php?t=505156 - Besfen ROM
Click to expand...
Click to collapse
Mr HAREE I tried with the "OLD_GENE_ORIGINAL_WM6" ROM but I am having same UPDATE [300] error..!!!
I am trying every ROM available for GENE please guide me..!!!
My cells manufacture date is AUGUST 2008..!!!
Can you tell me which CUSTOM RUU to use for GENE .nbh files & which option of all those is to be used cause there is no SPL1.10.Olip in it & also the CID unlocker for GENE from bootloader cause thats what only I can access now..!!!!
& another thing in "SPL Unlocking Tools-SPL updater-Orefkov"
"wcescomm.exe" in step 4
I am not getting USB in step 6. "Run mtty1_42.exe programm, and press button "USB""
NOTE: - I am using VISTA
try this
http://forum.xda-developers.com/showthread.php?t=513329
give answer to the program as follows:
step 1 no "1"
step 2 yes "2"
press no in the error message
step 3 no "n"
then mtty application will start, follow the steps thr
stupidgye said:
try this
http://forum.xda-developers.com/showthread.php?t=513329
give answer to the program as follows:
step 1 no "1"
step 2 yes "2"
press no in the error message
step 3 no "n"
then mtty application will start, follow the steps thr
Click to expand...
Click to collapse
Its not helping..!!!!
I already have old GENE..!!!
MTTY is not working on VISTAS..!!!
try this
hi
as per the ur spl mentioned and mine is the same so urs is a old gene i hope the numbers mentioned is right now try this
1.off the phone
2.take batter out press the power button for few secs around 3-4 secs
3.put battery back into the phone keep pressing camera button and power on the phone this should get u the tricolor screed if u get it good attached USB cable and flash an new ROM with ROm utty
or
press camera button and restart the phone with stylus this should also get u the tricolor
if u down load the besfenROM it also has the Rom utty with the ROm us this one and not the ROM utty u already have with u
good luck
heartsurfer008 said:
Its not helping..!!!!
I already have old GENE..!!!
MTTY is not working on VISTAS..!!!
Click to expand...
Click to collapse
heartsurfer008 said:
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2953612&postcount=2
or meet me at 8pm IST on yahoo or msn messenger pm me your id
ankit360 said:
http://forum.xda-developers.com/showpost.php?p=2953612&postcount=2
or meet me at 8pm IST on yahoo or msn messenger pm me your id
Click to expand...
Click to collapse
I am ONLINE, my GENE has started but need your help for updating..!!!
heartsurfer008 said:
I am ONLINE, my GENE has started but need your help for updating..!!!
Click to expand...
Click to collapse
Pls Explain how it could be happent?? does the update process interupted??
use windows XP
1. disconect the usb cable
2. press camera, then reset, release reset but still press camera, release it if the screen show tri color
3. connect the cable
4. if it say found new hardware, install usb driver for vista, it is in the package you download from thread to did hard SPL.
http://www.4shared.com/file/81084740/fa599d63/SPL_Unlocking_Tools.html
5. after the driver installation finish, just run Romupdateutility.exe
Still messed up..!!!
BesFen said:
1. disconect the usb cable
2. press camera, then reset, release reset but still press camera, release it if the screen show tri color
3. connect the cable
4. if it say found new hardware, install usb driver for vista, it is in the package you download from thread to did hard SPL.
http://www.4shared.com/file/81084740/fa599d63/SPL_Unlocking_Tools.html
5. after the driver installation finish, just run Romupdateutility.exe
Click to expand...
Click to collapse
Well as I said I tired to update the ROM & I messed up but now used XP & got th e the ROM to its ORIGINAL condition..!!!
I want to update the ROM, I tired all the ROM roms but having the same update 300 error, My GENE is AUGUST 2008 manufactured & has SPL 1.10.Olip..!!!
So I need a proper CID unlocker & the proper BOOT LOADER UPADTE & RUU..!!!!
Can you help me???
& are you on any networking site cause its easier to communicate..!!!
Facebook : - http://www.facebook.com/profile.php?id=1442055873
Orkut : - http://www.orkut.co.in/Main#Profile.aspx?uid=13511036999101959478
heartsurfer008 said:
Well as I said I tired to update the ROM & I messed up but now used XP & got th e the ROM to its ORIGINAL condition..!!!
....[/url]
Click to expand...
Click to collapse
Is your Gene working at the moment with the .Olip SPL? If yes, then your Gene is already unlocked.
Try any ROM you wish, just make sure that its post says that it is for "Old Gene". You may try a lot of Good ROMs from this forum, I can't suggest you any specific since its against my principle.
Best of Luck and happy flashing?
try to flash ur device on that tri color screen
if it is unlocked then it will definitely get flashed with any ROM for old gene, and if their is some problem them u probably have a new gene sso try orekfov method to unlock
Why in the world people dont want to read the tutorial properly before flashing, dont you guys give a damn to the phone that you purchased using your heard earned money, doesn't it deserve a little bit of your grey matter?.
First of all, there is no problem in unlocking phone from Vista so i request you guys to not spread this myth. In VIsta, you only need to downgrade your activesync drivers to windows xp ones and everything else goes smooth as pie. If you dont even know how to upgrade your pc drivers even after reading the guide and using the helpful driver update wizard that Windows Vista provides, i advice you to stay away from all this unlocking stuff, this is strictly not for you untill you study how driver updating works in Windows. And all this driver updating stuff is written in the Tutorial as a vital step, still people manage to skip it.
Secondly, if you had given even a little glance at tutorial you would know that if the Olipro SPL doesn't works on a phone, it is a new gene and the Orefkov's method must be used. After using that, phone gets alive right on that moment.
So as always, i wont try to help any futher, this is not a kids forum. If you consider me rude, good for you. But i just can't tolerate ignorance of this level.
Good luck.
krazy_about_technology said:
Why in the world people dont want to read the tutorial properly before flashing, dont you guys give a damn to the phone that you purchased using your heard earned money, doesn't it deserve a little bit of your grey matter?.
First of all, there is no problem in unlocking phone from Vista so i request you guys to not spread this myth. In VIsta, you only need to downgrade your activesync drivers to windows xp ones and everything else goes smooth as pie. If you dont even know how to upgrade your pc drivers even after reading the guide and using the helpful driver update wizard that Windows Vista provides, i advice you to stay away from all this unlocking stuff, this is strictly not for you untill you study how driver updating works in Windows. And all this driver updating stuff is written in the Tutorial as a vital step, still people manage to skip it.
Secondly, if you had given even a little glance at tutorial you would know that if the Olipro SPL doesn't works on a phone, it is a new gene and the Orefkov's method must be used. After using that, phone gets alive right on that moment.
So as always, i wont try to help any futher, this is not a kids forum. If you consider me rude, good for you. But i just can't tolerate ignorance of this level.
Good luck.
Click to expand...
Click to collapse
@ krazy_about_technology, sorry but I am not a NOOB, i have updated many ROM's but I am using VISTAS BLACK version by AMIT AGARA so I couldn't
update or technically DEGRADE the ACTIVE SYNC, that is the prob with it..!!!
& I have read the whole tutorial almost 10 times but still it didn't help me...
I have tried all old & new ROMs both using VISTAS & XP but my GENE is not getting updated..!!!
ERROR
Well try on different computer then. Use an genuine, clean copy of Vista or XP and you will succeed.
Done that
krazy_about_technology said:
Well try on different computer then. Use an genuine, clean copy of Vista or XP and you will succeed.
Click to expand...
Click to collapse
Do you think I haven't tried that???
I have done it on a CLEAN original valid version of XP but the same prob..!!!
Just check out that "UPDATE ERROR 300", I find that something unusual..!!!
Just see the PIC I have uploaded above this..!!!"
Hmm... Have you tried using the Orefkov unlocker method? What output is it giving? Try doing it after removing the battery, holding down the power button for 15 seconds and then then putting battery back and restarting phone in bootloader mode. I will try to get more info on this in the meanwhile.