I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Please help me..!!!
Please help MODS..!!!
Also tell me how to use .NBH files for GENE I mean is CUSTOM RUU is ok???
& if yes then which of the 6 options is to be selected..!!!
I am using VISTAS...!!!
sugestion
hi
as per ur nos giving it is a old gene(SPL 1.10.Olip is for old gene see my sign) my suggestion is
go to the link below download the ROM for OLD GENE also download a new ROM utty besfen ROM comes with the utty u can also use these roms for ur Gene see 2nd link provided i think ur existing Rom utty is corrupted
besfen has also provided original wm6 u can also try that also
good luck
http://forum.xda-developers.com/showthread.php?t=467796 - Krazy ROM
http://forum.xda-developers.com/showthread.php?t=505156 - Besfen ROM
heartsurfer008 said:
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Please help me..!!!
Click to expand...
Click to collapse
haree said:
hi
as per ur nos giving it is a old gene(SPL 1.10.Olip is for old gene see my sign) my suggestion is
go to the link below download the ROM for OLD GENE also download a new ROM utty besfen ROM comes with the utty u can also use these roms for ur Gene see 2nd link provided i think ur existing Rom utty is corrupted
besfen has also provided original wm6 u can also try that also
good luck
http://forum.xda-developers.com/showthread.php?t=467796 - Krazy ROM
http://forum.xda-developers.com/showthread.php?t=505156 - Besfen ROM
Click to expand...
Click to collapse
Mr HAREE I tried with the "OLD_GENE_ORIGINAL_WM6" ROM but I am having same UPDATE [300] error..!!!
I am trying every ROM available for GENE please guide me..!!!
My cells manufacture date is AUGUST 2008..!!!
Can you tell me which CUSTOM RUU to use for GENE .nbh files & which option of all those is to be used cause there is no SPL1.10.Olip in it & also the CID unlocker for GENE from bootloader cause thats what only I can access now..!!!!
& another thing in "SPL Unlocking Tools-SPL updater-Orefkov"
"wcescomm.exe" in step 4
I am not getting USB in step 6. "Run mtty1_42.exe programm, and press button "USB""
NOTE: - I am using VISTA
try this
http://forum.xda-developers.com/showthread.php?t=513329
give answer to the program as follows:
step 1 no "1"
step 2 yes "2"
press no in the error message
step 3 no "n"
then mtty application will start, follow the steps thr
stupidgye said:
try this
http://forum.xda-developers.com/showthread.php?t=513329
give answer to the program as follows:
step 1 no "1"
step 2 yes "2"
press no in the error message
step 3 no "n"
then mtty application will start, follow the steps thr
Click to expand...
Click to collapse
Its not helping..!!!!
I already have old GENE..!!!
MTTY is not working on VISTAS..!!!
try this
hi
as per the ur spl mentioned and mine is the same so urs is a old gene i hope the numbers mentioned is right now try this
1.off the phone
2.take batter out press the power button for few secs around 3-4 secs
3.put battery back into the phone keep pressing camera button and power on the phone this should get u the tricolor screed if u get it good attached USB cable and flash an new ROM with ROm utty
or
press camera button and restart the phone with stylus this should also get u the tricolor
if u down load the besfenROM it also has the Rom utty with the ROm us this one and not the ROM utty u already have with u
good luck
heartsurfer008 said:
Its not helping..!!!!
I already have old GENE..!!!
MTTY is not working on VISTAS..!!!
Click to expand...
Click to collapse
heartsurfer008 said:
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2953612&postcount=2
or meet me at 8pm IST on yahoo or msn messenger pm me your id
ankit360 said:
http://forum.xda-developers.com/showpost.php?p=2953612&postcount=2
or meet me at 8pm IST on yahoo or msn messenger pm me your id
Click to expand...
Click to collapse
I am ONLINE, my GENE has started but need your help for updating..!!!
heartsurfer008 said:
I am ONLINE, my GENE has started but need your help for updating..!!!
Click to expand...
Click to collapse
Pls Explain how it could be happent?? does the update process interupted??
use windows XP
1. disconect the usb cable
2. press camera, then reset, release reset but still press camera, release it if the screen show tri color
3. connect the cable
4. if it say found new hardware, install usb driver for vista, it is in the package you download from thread to did hard SPL.
http://www.4shared.com/file/81084740/fa599d63/SPL_Unlocking_Tools.html
5. after the driver installation finish, just run Romupdateutility.exe
Still messed up..!!!
BesFen said:
1. disconect the usb cable
2. press camera, then reset, release reset but still press camera, release it if the screen show tri color
3. connect the cable
4. if it say found new hardware, install usb driver for vista, it is in the package you download from thread to did hard SPL.
http://www.4shared.com/file/81084740/fa599d63/SPL_Unlocking_Tools.html
5. after the driver installation finish, just run Romupdateutility.exe
Click to expand...
Click to collapse
Well as I said I tired to update the ROM & I messed up but now used XP & got th e the ROM to its ORIGINAL condition..!!!
I want to update the ROM, I tired all the ROM roms but having the same update 300 error, My GENE is AUGUST 2008 manufactured & has SPL 1.10.Olip..!!!
So I need a proper CID unlocker & the proper BOOT LOADER UPADTE & RUU..!!!!
Can you help me???
& are you on any networking site cause its easier to communicate..!!!
Facebook : - http://www.facebook.com/profile.php?id=1442055873
Orkut : - http://www.orkut.co.in/Main#Profile.aspx?uid=13511036999101959478
heartsurfer008 said:
Well as I said I tired to update the ROM & I messed up but now used XP & got th e the ROM to its ORIGINAL condition..!!!
....[/url]
Click to expand...
Click to collapse
Is your Gene working at the moment with the .Olip SPL? If yes, then your Gene is already unlocked.
Try any ROM you wish, just make sure that its post says that it is for "Old Gene". You may try a lot of Good ROMs from this forum, I can't suggest you any specific since its against my principle.
Best of Luck and happy flashing?
try to flash ur device on that tri color screen
if it is unlocked then it will definitely get flashed with any ROM for old gene, and if their is some problem them u probably have a new gene sso try orekfov method to unlock
Why in the world people dont want to read the tutorial properly before flashing, dont you guys give a damn to the phone that you purchased using your heard earned money, doesn't it deserve a little bit of your grey matter?.
First of all, there is no problem in unlocking phone from Vista so i request you guys to not spread this myth. In VIsta, you only need to downgrade your activesync drivers to windows xp ones and everything else goes smooth as pie. If you dont even know how to upgrade your pc drivers even after reading the guide and using the helpful driver update wizard that Windows Vista provides, i advice you to stay away from all this unlocking stuff, this is strictly not for you untill you study how driver updating works in Windows. And all this driver updating stuff is written in the Tutorial as a vital step, still people manage to skip it.
Secondly, if you had given even a little glance at tutorial you would know that if the Olipro SPL doesn't works on a phone, it is a new gene and the Orefkov's method must be used. After using that, phone gets alive right on that moment.
So as always, i wont try to help any futher, this is not a kids forum. If you consider me rude, good for you. But i just can't tolerate ignorance of this level.
Good luck.
krazy_about_technology said:
Why in the world people dont want to read the tutorial properly before flashing, dont you guys give a damn to the phone that you purchased using your heard earned money, doesn't it deserve a little bit of your grey matter?.
First of all, there is no problem in unlocking phone from Vista so i request you guys to not spread this myth. In VIsta, you only need to downgrade your activesync drivers to windows xp ones and everything else goes smooth as pie. If you dont even know how to upgrade your pc drivers even after reading the guide and using the helpful driver update wizard that Windows Vista provides, i advice you to stay away from all this unlocking stuff, this is strictly not for you untill you study how driver updating works in Windows. And all this driver updating stuff is written in the Tutorial as a vital step, still people manage to skip it.
Secondly, if you had given even a little glance at tutorial you would know that if the Olipro SPL doesn't works on a phone, it is a new gene and the Orefkov's method must be used. After using that, phone gets alive right on that moment.
So as always, i wont try to help any futher, this is not a kids forum. If you consider me rude, good for you. But i just can't tolerate ignorance of this level.
Good luck.
Click to expand...
Click to collapse
@ krazy_about_technology, sorry but I am not a NOOB, i have updated many ROM's but I am using VISTAS BLACK version by AMIT AGARA so I couldn't
update or technically DEGRADE the ACTIVE SYNC, that is the prob with it..!!!
& I have read the whole tutorial almost 10 times but still it didn't help me...
I have tried all old & new ROMs both using VISTAS & XP but my GENE is not getting updated..!!!
ERROR
Well try on different computer then. Use an genuine, clean copy of Vista or XP and you will succeed.
Done that
krazy_about_technology said:
Well try on different computer then. Use an genuine, clean copy of Vista or XP and you will succeed.
Click to expand...
Click to collapse
Do you think I haven't tried that???
I have done it on a CLEAN original valid version of XP but the same prob..!!!
Just check out that "UPDATE ERROR 300", I find that something unusual..!!!
Just see the PIC I have uploaded above this..!!!"
Hmm... Have you tried using the Orefkov unlocker method? What output is it giving? Try doing it after removing the battery, holding down the power button for 15 seconds and then then putting battery back and restarting phone in bootloader mode. I will try to get more info on this in the meanwhile.
Related
Help please!
I have an T-Mobile Ameo (also known Athena X7500) and i tried the Olipro Unlocker, but the installation didnt finish, at 59% stopped. After that i turn off the device, then turn on, but my device still have a 4 colour screen,red, green, blue and white, it doesnt boot the Windows Mobile, just have the installation screen...
please help
Use olipro's tool again and then flash your final ROM
i tried it many times, but since than my Athena X7500 was dead, the Olipros unlocker doesnt work. The program said: "The Update Utility cannot connect your PDA phone"
In bootloader (coloured screen), does it say anything? if so what? when you try to flash a rom or use unlocker do you get a code? is your memory card out of the slot?
I took a photo my bootloader (coloured) screen:
http://kepfeltoltes.pirateclub.hu/pics/20090106317.jpg My device doesnt say anything.
When i used the unlocker, i didnt got any code. And my memory card was in the slot.
I also took a photo what the Olipro's said now, if i try to continous the flashing:
http://kepfeltoltes.pirateclub.hu/pics/20090106319.jpg
Have you tried flashing your carrier's original Rom?
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Thanks a lot, my athena is live again, i flash my original rom!!!
But the Olipros Unlockert isnt working, the installation go to 100%, the program said that the flashing is succesfull, but my SPL is still 1.1, and i cant flash any roms..
I can understand why. Any ideas?
The other thread was closed, you shouldn't double post.
Read the links I mentioned.
as in olis first post
"Please note: you must have .net Framework 2.0 installed with the services packs, if you don't it then it probably won't run till you download it.
SPECIAL INFO ABOUT STEP 2: When you run this step, first your device will be flashed; this is NOT the end of Step 2, you must then configure your device and set it up fully so you can access the menus etc (there will be a prompt to ask you to do this after the flash anyway). then you will be able to continue. please make sure to read ALL dialogs fully"
leave out the sim and sd card.
Some others have reported better luck with the shipped WM6 rom if they had trouble unlocking.
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
VorosAdam said:
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
Click to expand...
Click to collapse
the net framework should be on your computer.
what OS is on your computer ?
May be better if you use winXP
did you install an oficial wm6 rom ?
Read the later pages in the unlocker thread
My computer also have the NET Framework 2.0 SP2. And when the flashing didn't work, i also installed the NET Framework 3.5 SP1, but, when i flashing a ROM in my decive, it also went to 100%, but the SPL is still 1.1.
I use a 32-bit Windows XP in my computer.
My T-Mobile Ameo (Athena) is a second hand device, it was used when i bought. But the first user said me, that the original OS was the Windows Mobile 5 in my Athena, but he update from Windows Mobile 5 to Windows Mobile 6.0. He said that he update with an official T-Mobile way.
Ok all good so far
Did you use the unlocker from this thread?
http://forum.xda-developers.com/showthread.php?t=315831
The other thought i had was that you should try a different computer and usb cable
oh, thank you so mutch, i tried an another computer, and it flashed the SPL from 1.1 to 1.2!
thanks again
my htc advantaage x7500
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
sheizi said:
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
Click to expand...
Click to collapse
I saw someone with the same problem as you here awhile back and he was able to fix it. So keep your post alive or read the sticky post under the Upgrade section. I believe that was where I read it.
dead X7500
Hey Im also a sufferer of a dead X7500......this all happened wen I was trying to flash my ROM which was using a SPL !.20 OLIPRO
wen I try to re flash the device , it starts a stops at 1% and follows an error msg !
plzzzzzzzzzzzz help me out to solve this prob !
regards!
VorosAdam said:
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Click to expand...
Click to collapse
I have the same problem would be kind and tell me how you solved the problem.
[email protected]
Hello Everyone!
This is a step by step guide for unlocking the SPL of your HTC P3400 or P3400i.Please read and follow everything given here carefully and you will have your phone unlocked within 15 minutes.
This is a step taken in order to minimize the accidental bricking scenerios happening almost everyday here.
The Guide is divided into 2 Parts, A FAQ section and the Unlocking Guide Section. I request you to please read all of this before doing any furthur steps. ROM Flashing can be very dangerous if not done properly.
Enjoy!
Frequently Asked Questions
FAQ (Frequently Asked Question) Read Carefully Please
Q1. What is the basic information about my phone that i would need to get started with this process or for troubleshooting?
Ans. The basic information that you need is displayed on the white htc splash screen that shows up when you start your phone. This inludes:
ONBL version, SPL version, GSM or Radio version and OS version.
Apart from that, you will also need the serial number of your device. This can be found behind the battery on your device or on one side of the packaging box in which your device came.
An optional thing that may come handy is the version number of your ROM which can be found by going to Start > Settings > System > Device Information. Look for the ROM Version there.
Q2. What is SPL, Why it needs patching, and what are the things i need to keep in mind?
Ans. SPL or Second Program Loader is a part of your phone's firmware. Its responsible for both loading of operating system and it is also used by operating system for some low level tasks. By Default, HTC and Other Manufacturers too, design it in such a way that it does not allows custom ROMs to be flashed in the phone. It does no by checking for the Digital Signature of HTC on roms. So it need to be patched in order to flash custom ROMs made by chefs in this forum.
There are two SPLs available right now for P3400 and P3400i. One is Olipro's SPL for Old Gene and Second is Orefkov's SPL for New Gene. These should be used according to the device they are meant for. Using wrong SPL can make your device dead.
One more thing is, SPL is needed to be updated just once. Only one of the given SPLs will work for you and you will never need to patch it again. This is true for those situations too when you flash a rom and your phone does not boots past the White HTC splash screen. In that case too, As you have just flashed an incompatible ROM, you just need to use another, compatible ROM to get your phone back. NEVER UPDATE YOUR SPL ONCE IT IS PATCHED BY EITHER OF THE METHODS
Q3. How can i be sure which version i need to use, i am not sure whether i have an old gene or new gene?
Ans. Earlier it was being thought that one can differentiate between New Gene and Old Gene on the basis of Onbl and Serial Nos. But this has not found to be true as evident from many cases of bricking.
One of the possible checks for knowing that is if your phone originally came with Windows Mobile 5, its probably an old gene, and If it came with Windows Mobile 6, its probably an New Gene. However, this is also not a concrete basis to decide the version of SPL.
So i recommend to follow these steps, These should work for any Gene without problem.
1. Use the Olipro method first. It will work properly if your device is an old gene.
2. If it fails and your phone becomes dead, just follow the instructions for using Gene Unbricker for new gene and your phone will be back again. This way, your new gene will be flashed with Orefkov's method.
Q4. Are there any precautions that i need to take when selecting a ROM for flashing to my device?
Ans. Yes, there are indeed some things that you need to keep in mind before making mind to flash a ROM.
1. Make sure your SPL is patched, ie. On boot screen it should have either SPL 1.10.Olip displayed in case of an old gene OR SPL 1.07.Oref in case of a new gene. If it is not, patch it using the Guide given below. If it is, dont ever try to patch it again.
2. After patching your SPL you will become sure that whether your phone is a new gene or old, because of knowing the version of SPL that worked for you. Now, never choose a ROM which is not built for your phone. Only use ROMs appropriate for you phone. And if you ever accidently flash a ROM of wrong version, dont panic. Just flash another ROM for your version and your phone will be back.
3. In general, never try to downgrade your ROM. Means if your original ROM was WM 5 and you upgraded to WM 6 or 6.1 Dont try to downgrade to WM5. This is specially true for WM 5 because of reasons i'll explain later.
Q5. Why is it not recommended to downgrade the OS version, ie. moving to a previous ROM version?
Ans. There is no problem actually in doing so. But there are some situations that needs to be taken care of. What happens is, Somtimes, the previous version of Original ROMs from htc, contain the older version of SPL that is very specifically made for that version of ROM.So if you flash this ROM, your SPL will again become locked. This is specially true for original WM 5 ROMs
In case your phone came with WM5 originally, and the version of ROM exactly with the one that was originally on your device, It wont give any problem. But if this ROM is not exactly the version your phone originally came with, this will brick your device and you'll have to take it to service center. No homemade solutions works then.
Even bigger problem arises when your phone came with Wm 6 originally and you try to downgrade it to WM 5. This will certainly brick your device and force you to take it to service center. SO DONT EVER TRY TO DOWNGRADE A GENE TO WM5 IF IT ORIGINALLY CAME WITH WM 6.
ROMs created by users here do not contain the ONBL, SPL and GSM parts (dont worry about the names). These only contain the OS part which is safe to use.
Q6. What are the things i can try if i get a problem while this process?
Ans. You shouldn't get any trouble if you take all the precautions, but even if you do, you can try :
1. If your gene is bricked by Olipro SPL, use the gene unbricker for new gene by Orefkov.
2. If you flashed your phone with a ROM made by some user on this forum and it doesn't works, just flash another version of the ROM or some other compatible ROM. NO need to touch anything else.
3. If you downgraded/Upgraded using any of the Original HTC ROMs and your phone is bricked, try the JTAG Method by Orefkov. Search for it, you'll easily find it. If even that doesn't helps, Take your device to service center.
Q7. What is bootloader mode, and how do i enter it?
Ans. Bootloader mode is a special mode which is use to flash ROMs. Bootloader is the part of your phone's firmware that kicks in even before SPL and initializes it. You may need to enter this mode while patching your SPL or sometimes while flashing a ROM. To do that, Shutdown your phone, Press and Hold the Camera Button and press the power button or the soft reset key using your stylus. This will take you to a 3 colored screen with your Onbl and SPL version displayed on it. This is called the Bootloader mode.
Q8. What is Hard Reset and Soft Reset and how to do it?
Ans. Soft reset is a second name for restarting your phone. It can be done using power button too but sometimes, when the phone is hanged, it needs to be done by pressing the soft reset key, situated in a small hole near the mini usb port you use for charging and headfone, using your stylus. Your phone will restart immediately without any harm. But if you have any unsaved data, like an open, edited word file or a text message half written and not saved, they will be lost. But all your saved data is safe.
Hard reset is something that needs to be done when there is some problem with the phone that is not being solved using any standard method or restarting the phone. This method erases all the files and data in phone memory (not SD card) and makes your phone as it came new from factory or just after a fresh ROM upgrade. You'll loose all your emails, calender items, Todo list, sms, contacts etc. But most of the problems get solved using this. So before using this, backup your PIM data using utilities like PIM Backup by dotfred etc.
To do a hard reset, shutdown your phone, Press and hold the two soft keys (the keys above the call accept and call reject keys) and press the reset button using stylus. A black screen will appear warning you about the consequesnces. Press the Green key (call accept key) to start the process.
The Step By Step Guide
The Step By Step Guide
CAUTION: DO NOT UPDATE ROM OF A PHONE THAT IS SIM LOCKED. THE RESULTS ARE UNKNOWN BUT MOST OF THE TIMES IT PREVENTS YOU FROM USING THE PHONE ANY FURTHUR!!
If you like to backup your existing rom first, follow this guide by Ankit360 to do it : http://forum.xda-developers.com/showpost.php?p=3215838&postcount=20
Step 1: Download the Tools
-------------------------------
Download the tools zip file from here:
http://www.4shared.com/file/81084740/fa599d63/SPL_Unlocking_Tools.html
Its a self extracting file, just start it and give a path and it will unzip all the files in your chosen folder. Inside the extracted folder you will find these things:
1. SPL Updater : Inside it there are 2 folders, Olipro and Orefkov. These contain the two SPL patchers that we need to use.
2. ROM Update Utility : This contains the ROM update utility we will need to flash a ROM. Unzip it into a folder.
3. USBDriver4ActiveSyncVista : This contains a special driver for Windows Mobile Device Center in Vista that you need to use to successfully update your ROM. Unzip it in a folder too.
4. Download a ROM appropriate for your device: Which one is appropriate, you'll only know after updating your SPL. So do this step after that. But in any case, here is a link to a good ROM, created by me, which is available for both new and old gene:
Sumit's Pro Users ROM (WM 6.1, for new and old gene)
http://forum.xda-developers.com/showthread.php?t=467796
Step 2: Preparing your phone
--------------------------------
1. Copy the file gene_hspl.exe from the SPL Updater\Olipro folder that you got in step 1 to the phone memory.
2. First, on your phone, Go to Start > Settings > Connections > USB to PC. Here, uncheck the checkbox : enable advance nerwork functionality. Click OK. Disconnect and Reconnect the USB cable to your pc.
Step 3: Prepare your Computer (Please pay attention, this is crucial!)
--------------------------------
XP Users
----------
There is not much you need to do. Just open task manager and kill the Active Sync executable from the processes tab. Its named as wcescomm.exe.
Vista/Windows 7 Users
-------------
You need to take these steps :
1. Go to desktop, right click Computer, and select Manage. Go to Device Manager. Now under the section Mobile Devices, Double Click : Smartphone USB Sync.
2. On the Drivers tab, click "Update Driver..." button. On next screen click : "Browse my computer for driver software".
3. Click : "Let me pick from a list of device drivers on my computers". Click "Have Disk.." on next screen. Click "Browse..." and go to the folder extracted in step 1. There, go to USBDriverforActiveSyncVista folder. Here select the file "wceusbsh.inf" and click OK.
4. Click Next and finish the wizard.
NOte : YOU NEED TO DO THIS TO SEE THE "USB" BUTTON IN MTTY WINDOW IN LATER STEPS. DONT SKIP IT!
Step 4: Use the Olipro method first.
-----------------------------------------
Open File manager on your phone. Go to the location on phone memory where you saved gene_hspl.exe. Tap on it to run it. Your phone will restart after a short pause.
Now there are two chances :
a) If its done alright, you'll see SPL 1.10.Olip on your boot screen and your phone will boot just fine. And it confirms that you have an old gene. You do not need to do Step5. Proceed to Step 6.
b) If it doesn't boots, and only green and red keys blink, Don't worry. Your phone is bricked but you'll get it back using orefkov's method in a minute. Proceed to next step. And this confirms that you have a new gene.
Step 5: Use the Orefkov Unlocker
------------------------------------
1. Remove the battery, SIM card and SD Card of your phone and press the Power key for 20 seconds to draw out any residual power from the phone.
2. Replace the battery but not the SIM and SD card, and don't start the phone yet. Press and hold the Camera button and then press the Power button or Soft Reset button. Phone will come to boot loader mode (tricolor screen) and SPL 1.10.Olip will be displayed.
3. Connect the USB cable. The text USB will appear on the bottom of the screen.
4. On PC, go to the folder Orefkov in the folder extracted in step 1 and run the Mtty1_42.exe. Press the button "USB" in the window that opened.
5. In the window that opened, type the following command (don't use copy paste please) and press enter:
Code:
set 32 1
You'll see a response from phone.
6. Type the following command BUT DON'T PRESS ENTER YET:
Code:
ls boot.bin
Note : that is small L and small s in that command, dont mistake it with I.
Now, hold down the Camera button on phone, and press the enter key on computer. After a while, the screen will become White. Continue pressing the Camera button for 10 more seconds.
7. Now release the camera button, close the MTTY program and run ROMUpdateUtility.exe in the same folder, not the one outside it. That one is for RAM flashing that we will use later. Check the boxes in each step and click Next Next and then at last Update. Let it finish the process. Your phone will restart.
8. Now on the splash screen you'll see the info with updated SPL version. The version of SPL will be 1.07.Oref.
Congrats! you have successfully patched your SPL.
Step 6: Flash the ROM
---------------------------
Now let the phone boot once and then shutdown it. Insert your SIM card, but not the SD card. Go to the PC and copy the ROM file (it must be names RUU_Signed.nbh. Rename it if it has some other name.) into the ROM Update Utility folder that is outside the Orefkov and SPL Patcher folder.
Now press and hold the camera button and start your phone to go into the Boot loader mode once again.
Now Run the RomUpdateUtility.exe and follow her instructions. Please make sure that you are not running RomUpdateUtility inside the Orefkov folder in SPL Updater folder. You must use the one outside, in the RomUpdateUtility folder. Your phone will automatically go into bootloader mode and a progress bar will be displayed on both phone and PC. Once it completes, your phone will restart again and you'll get the phone with the brand new ROM.
Step 7 : Set your PC and Phone back to normal
------------------------------------------------
This step is only needed in case you are using Vista.
The driver we updated in Vista will not work for normal active sync operation. So you'll need to set it back to the original version. There are two ways to do that. Either, uninstall and reinstall the Windows Mobile Device Center Or Follow the same procedure gicen in Step 3 but instead on clicking the "Have Disk button", choose the driver from the list already given.
The driver that you need to install can be identified by have a newer version given in front of its name. Also, the newer driver's name includes "Microsoft Corporation" while the older one has only "Microsoft".
You can Put back your SD card now.
On your phone, again go to the Start > Settings > Connections > USB and check the checkbox there and click OK.
That's it! You are Done.
Credits
Thanks to these people whom work helped me greatly in writing this Tutorial:
Ankit360 for writing the original tutorial.
Olipro for providing the SPL for old gene.
Orefkov for providing the Gene Unbricker for New GENE.
Nevermind_me for sharing his real experience as an end user and help in updating the guide.
NEW BEE
The info being provided is very informative,there is no way i can go wrong with these steps.hope it helps unbricking my phone.thanks to the people involved for making it happen.you guys rock.gonna try these steps will let you know if i got it rite.
your fellow new bee
I TRIED THE SUMMITS STEP B STEP GUIDE AT THE POINT WHER MMTTY PROG SUPPOSE TO MAKE SCREEN ON PHONE GO WHITE IT GIVES ERROR MESSAGE SOMETHING ABOUT CAN'T DOWNLOAD IMAGE,OR SOMETHNG
My P3400i SR8XX is OLD or NEW?
Hi! Crazy & Ankit,
I am from Delhi and having P3400i with SR. HT8XXXX, onbl-1.17.000,spl-1.17.000,os-1.8.00.
In the past I have flashed several times of cooked rom by chayn & lomlom without changing to permanent HSPL. It was done by temporary CID unlock method as running jumpsp.exe while pressing and holding Camera+VoiceReco button and flashing. Presently we are using Vista Design build 20270 by Chayn and and still my onbl& spl displays 1.17.000.
Today I tried to flash Ankit M2D rom using previous method, flash completed successfully, device restarted but stuck on boot loader. Then i restore my Gene by RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship and then flashed Chayn Vista Design 20270 which is working fine.
Please confirm whether my Gene is NEW or OLD as if it were NEW then Ankit's ROM Should work. Sorry for my bad english.
Thanks..........
Yours is an old gene i guess. Using Serial No, ONBL and SPL versions for recognizing your phone as a new or old gene is not reliable. chyan and lomlom's both have provided some excellent roms for both new and old gene so i cant say about that also. But ya, if Ankit's ROM is not working then yours is an old gene, i am 99% sure.
Thanks for your quick response to our query. Further, could you please advise me better ROM for me to Flash.
Also, I have created 1% increment battery dll and tested on my gene which is working fine. Is it possible to include it in your ROM.
@krazy
Oh Boy! Now we have an old Gene (3400i) with 8 series number and 1.17 onbl. Great going HTC !
Guess you have some really busy time coming up.
BTW:
Do you know typing? Better learn it soon .
What to say brother, HTC is just making things difficult, i guess they want to sell the higher end mobiles too. But i dont understand, apart from WinMo 6.1, their higher end mobiles have faster and greater hardware. So how come flashing a gene with WM 6.1 and Manilla 2D can affect their sales? I wont go for a P3400i if i had the money to buy a diamond even if both of them can/already have WM 6.1.
I know typing very well, you might have got some idea from the amount of text i post when i post a new rom I am ready, give it to me baby! Yeah! LOL!
qasidakbar said:
Thanks for your quick response to our query. Further, could you please advise me better ROM for me to Flash.
Also, I have created 1% increment battery dll and tested on my gene which is working fine. Is it possible to include it in your ROM.
Click to expand...
Click to collapse
Hey man, its really nice! Love it. Will include it in ROM is some more users gave positive responses, as you know that the ROM is not for somebody alone, its for the community. So will have to take some feedback before including. I'll post it in recommended downloads section in both of my roms. Thanks for it mate
krazy_about_technology said:
Yours is an old gene i guess. Using Serial No, ONBL and SPL versions for recognizing your phone as a new or old gene is not reliable. chyan and lomlom's both have provided some excellent roms for both new and old gene so i cant say about that also. But ya, if Ankit's ROM is not working then yours is an old gene, i am 99% sure.
Click to expand...
Click to collapse
You are 100% right, my gene is absolutely OLD. I have downloaded and flashed your OLD Gene 1.04 rom and it is working fantastic. Thanks again your are really the Crazy Sumit.
Yeh, I know I am Krazy, but Krazy with a K not C! Got it
Rom in PTG
Hello staff of the forum can be a rom in PT to Gene 100 HTC P3400?
thanks
Phone Info:
S/N:SZ71xxxx TMN ONBL: 1.07.0000 SPL: 1.07.0000 OS:1.7.0.0
puto116 said:
Hello staff of the forum can be a rom in PT to Gene 100 HTC P3400?
thanks
Click to expand...
Click to collapse
There are no 'staffs' in this forum, we all are members just like you . Please elaborate your phone details (the details your device shows when you switch on), then someone will be able to help you out.
@qasid: The battery bar did not show up in my Gene in the top bar . Using a manilla2D version. any ideas?
@shaunak! Have you tried sdkcerts patch, I think it will solve the issue.
qasidakbar said:
@shaunak! Have you tried sdkcerts patch, I think it will solve the issue.
Click to expand...
Click to collapse
Yup! its already installed, since I am using color icons. Can you please post a screen shot ?
Rom in PTG
sorry
Hello staff of the forum can be a rom in PT to Gene 100 HTC P3400?
thanks
Phone Info:
S/N:SZ71xxxx TMN ONBL: 1.07.0000 SPL: 1.07.0000 OS:1.7.0.0
Addicted2xda said:
Yup! its already installed, since I am using color icons. Can you please post a screen shot ?
Click to expand...
Click to collapse
Please see post#8 for screen shot.
backup orignal rom
to bauckup orinal rom orefkov created small programm for it.
Programm dump_gene_os_extrom.exe do dump os and extrom from Gene to memory card. Created files are identical os.nb and extrom.nb, extracted from official RUU_Signed.nbh, and allow rom coocking with it.
Usage:
Copy dump_gene_os_extrom.exe on your device. Insert SD-card with at least 70 MB free on it. Run copied program. After some time you will see message - Dump complit. On SD-card will be files os.nb and extrom.nb.
how to flash ?
use htc rom tool
click on build tab
device = gene
u see firmware contain on right
give path Ext. ROM to extrom.nb
OS to os.nb
click on build u get new file called ruu_signed.nbh
ASP.LU
Automatic SPL Updater
This program is an automatic SPL updater for old and new gene (both included in one), it uses the olipro's and orekfov's SPL updating methods (tested and working perfectly on old GENE).
USAGE (SPL UPDATER)
[1] DOWNLOAD ASP.LU.exe.zip AND EXTRACT ITS CONTENTS
[2] EXECUTE ASP.LU.exe AND FOLLOW THE INSTRUCTIONS
Changes in V1.2
1) Added functionality to check whether the device is new or old (no user input required) (Checked on OLD & NEW GENE)
2) Program is now intelligent, it will not update the SPL if it is already updated. (Checked on OLD & NEW GENE)
3) Removed MTTY.
4) Added progress bar.
5) Made the usage and interface easier.
6) Removed PPCPIMBackup
=====================================================================
Old-New GENE Verifier
APPLICATION TO CHECK WHETHER YOU HAVE NEW GENE OR OLD.
Working fine, i had no issues with this app and it will not harm your device in any way, you can also use this if u have already updated the SPL of your device.
USAGE
1) Download SPLCHK.zip
2) Unzip and execute the extracted file on pc
Rest is automatic
i can test this without ne tension??
amolji said:
i can test this without ne tension??
Click to expand...
Click to collapse
yes u can...
it will not harm your device
kindly explain
hi
i dont get this can u expalain wat this is for
stupidgye said:
yes u can...
it will not harm your device
Click to expand...
Click to collapse
Well this program is a SPL updater for old and new gene (both included in one), it uses the olipro's and orekfov's SPL updating methods.
This is a beta version and i have not tried it on new gene yet
Hey can can anybody confirm whether hspl_geneHT8 is safe for new gene or not?
Hey buddy are you absolutely sure of the safety of this app? This can cost someone his phone which is not a small thing. I think experimenting with other people's phones is not a good idea. And if it has bugs, new people will fall very easily.
If you want, you can share the source code and people with programming experience including me can test it thoroughly without bricking any device.
Just a suggestion, no offences ok.
krazy_about_technology said:
Hey buddy are you absolutely sure of the safety of this app? This can cost someone his phone which is not a small thing. I think experimenting with other people's phones is not a good idea. And if it has bugs, new people will fall very easily.
If you want, you can share the source code and people with programming experience including me can test it thoroughly without bricking any device.
Just a suggestion, no offences ok.
Click to expand...
Click to collapse
well sumits this program is just a batch file and nothing else
it executes gene_hspl in the device after copying it to the device, and if this method fails then it uses mtty to unbrick and update SPL.
To make it fully automatic and bug free I need "bk_06_0001.img" generated by "bkondisk.exe" for both new and old gene with original SPL.
I have got it for new gene, can u help me to find it for old gene also?
and
is hspl_geneHT8 is working fine for new gene or not?
stupidgye said:
well sumits this program is just a batch file and nothing else
it executes gene_hspl in the device after copying it to the device, and if this method fails then it uses mtty to unbrick and update SPL.
To make it fully automatic and bug free I need "bk_06_0001.img" generated by "bkondisk.exe" for both new and old gene with original SPL.
I have got it for new gene, can u help me to find it for old gene also?
and
is hspl_geneHT8 is working fine for new gene or not?
Click to expand...
Click to collapse
i don't test it becoz my device is already unlock but i execute the exe its very cool if it work fine then it nice tool for noob ppl
ankit360 said:
i don't test it becoz my device is already unlock but i execute the exe its very cool if it work fine then it nice tool for noob ppl
Click to expand...
Click to collapse
thanks for your positive comments....
hey moderators
PLEASE MAKE IT STICKY
Ask here for this (thread sticky).
@stupidgye:
In the first post please mention that pple who have already unlocked their devices do not need to use your tool. Or they might just manage to screw up their devices .
has anyone tried this yet?
It's a great idea this prog. I didn't test it because my gene is already unlocked.
What will happen if we unlock an already unlocked device again?
There should be no problem if you flash the right spl. But it's better not do this.
hey buddies i have updated this application.
now its more safe to use this app and now it has less bugs.
Hey friends i have created the application that automatically tells u whether u have new or old gene and it takes less than 1 minute for that and it is purely based on date method and doesnt harm ur device. Just testing the application for any unknown bugs. I will release it in a day or two.
Happy Flashing
i tried your software...
trend-micro says that there is a mal-ware...
the mal-wares name is...
Code:
PE_CORELINK-C1
and even then, i let your program run but after i said that i have new gene...the program said it will try to update SPL with Orekfovs method...when i said "choice 1" a message keeps popping up...device not connected. would you like to copy again i say yes...obviously...but it continues to say the same thing...
this is ridiculous because windows mobile device centre detects it and says that device is already connected...
please look into the two issues...especially the mal-ware issue...because your reputation and name might be on stake here...
i m on windows vista btw
ok i'll look into it and fix it ASAP.
and i m not getting any malware issues. i m using AVAST.
BTW a new version is going to be released very soon.
creeping death said:
i tried your software...
trend-micro says that there is a mal-ware...
the mal-wares name is...
Code:
PE_CORELINK-C1
and even then, i let your program run but after i said that i have new gene...the program said it will try to update SPL with Orekfovs method...when i said "choice 1" a message keeps popping up...device not connected. would you like to copy again i say yes...obviously...but it continues to say the same thing...
this is ridiculous because windows mobile device centre detects it and says that device is already connected...
please look into the two issues...especially the mal-ware issue...because your reputation and name might be on stake here...
i m on windows vista btw
Click to expand...
Click to collapse
P3400i(Gene100) after flash bricked or suck bootloader mode
ROM file name RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship
how to solved plz help
or press on off key blink only keypad light
ok first find out if it is new gene or old . if it is new gene do a hardspl of oref , if it is old do a hard spl of olipro . u have to do this in bootloader mode . after flash ur cooked rom of old or new gene . do not upgrade ur gene with orginial rom like asia and all . u have to only put ur cooked rom or else u device again gets bricked . and ur orginal rom has spl and all so it had a chances to brick . hope u get the problem solved
rahmaneee said:
ok first find out if it is new gene or old . if it is new gene do a hardspl of oref , if it is old do a hard spl of olipro . u have to do this in bootloader mode . after flash ur cooked rom of old or new gene . do not upgrade ur gene with orginial rom like asia and all . u have to only put ur cooked rom or else u device again gets bricked . and ur orginal rom has spl and all so it had a chances to brick . hope u get the problem solved
Click to expand...
Click to collapse
how can i find out it is old or new Gene...........?
There are many ways to find out about gene that is old or new , if ur gene is shipped with orginal wm6 it is a new gene and if it is wm5 it is a old gene . Anyway another good method it hardspl loipro and install cooked room ... If it sucuessfully went inside the os it is old gene and if it again stucks in boot screen ... U need hardspl oref and to update new gene roms .. Thats all the way we can find out about old and new gene
rahmaneee said:
if ur gene is shipped with orginal wm6 it is a new gene and if it is wm5 it is a old gene .
Click to expand...
Click to collapse
no this is not the right way to identify them, one of my friend's GENE came with WM5 with sr no starting from HT8 series and it is a new GENE
one of my friend's GENE came with WM5 with sr no HT7 and it was also a new GENE.
The only way to identify it correctly before bricking is the SPL date method.
See my Sign for the tool to identify the Old-New GENE...(SPLCHK)
But this tool only works if ur device is in alive condition...
before flash my GENE(P3400i) Rom Version 1.17.720.1_4.1.13.34_02.79.90
use same version to flash my gene RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship this file n full flash dead my Gene no bootloader suck screen any option to back my GENE Normal .............?...
dude remove ur battery and put it again and then press the camera button and then power button to enter bootloader mode .
rahmaneee said:
dude remove ur battery and put it again and then press the camera button and then power button to enter bootloader mode .
Click to expand...
Click to collapse
also try this same problem only key pad light blink
@ Okay so lets start it afresh, first tell me from where did you download the ship rom you flashed, if it was posted on the forum than that would be a old gene rom as there is no ship rom for new gene available in the forum, this could help in knowing if your device is new or old.
Regds,
harry_01 said:
also try this same problem only key pad light blink
Click to expand...
Click to collapse
remove the battery for 20 seconds and press power button for 5 seconds then put in the battery again and then press and hold the camera button and then press the power button(camera button should be kept pressed at this moment) to enter bootloader mode .
vaibhav_batra_the_techguy said:
remove the battery for 20 seconds and press power button for 5 seconds then put in the battery again and then press and hold the camera button and then press the power button(camera button should be kept pressed at this moment) to enter bootloader mode .
Click to expand...
Click to collapse
and in some cases (like mine), you need to soft reset instead of pressing power button.
coolaj said:
@ Okay so lets start it afresh, first tell me from where did you download the ship rom you flashed, if it was posted on the forum than that would be a old gene rom as there is no ship rom for new gene available in the forum, this could help in knowing if your device is new or old.
Regds,
Click to expand...
Click to collapse
this rom download on this forum RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship
or flash time show replace old version 1.17.720.1_4.1.13.34 to new version 1.17.720.1_4.1.13.34 mean same full 100% flash but after full flash set dead my bad luck
can you tell which thread you got the link, or do one thing there is a stick thread in the forum as 'how to cook for gene' there are tools to download, now download the tools and follow the instructions to extract the rom which you downloaded there will be a spl.nb file extracted forom the nbh file, open the spl.nb file in a notepad and search for bootloader date if it is 12th march then its a old gene rom, this will mean that you have a new gene.do this much and reply.
EDIT: once you are confirmed that you have a new gene you can try the Orefkof Unbricker for new gene, you will find it here http://forum.xda-developers.com/showthread.php?t=472169. just follow the steps for recovering your device via Orefkov Method.I am 100% sure your device is New Gene but you have do the above steps to be 101% sure.
Attaching Nbhextract no need to download tools
coolaj said:
can you tell which thread you got the link, or do one thing there is a stick thread in the forum as 'how to cook for gene' there are tools to download, now download the tools and follow the instructions to extract the rom which you downloaded there will be a spl.nb file extracted forom the nbh file, open the spl.nb file in a notepad and search for bootloader date if it is 12th march then its a old gene rom, this will mean that you have a new gene.do this much and reply.
EDIT: once you are confirmed that you have a new gene you can try the Orefkof Unbricker for new gene, you will find it here http://forum.xda-developers.com/showthread.php?t=472169. just follow the steps for recovering your device via Orefkov Method.I am 100% sure your device is New Gene but you have do the above steps to be 101% sure.
Click to expand...
Click to collapse
this rom download on this page
http://forum.xda-developers.com/showthread.php?t=396744
harry_01 said:
this rom download on this page
http://forum.xda-developers.com/showthread.php?t=396744
Click to expand...
Click to collapse
This is a old gene rom, did you tried the above steps i told
coolaj said:
This is a old gene rom, did you tried the above steps i told
Click to expand...
Click to collapse
Tried with step 5 using Orifkov method but unable to go to Bootloader mode, tried several times. Unable to detect USB Mode Pls Help.
Read the instructions carefully and follow each and every step as said, for entering in bootloadeer hold camera button and use stylus to press the reset button which is next to the charging base, if you are using vista then follow the instruction to update the usb drivers as it is stated in the thread it wiill detect the usb
once you are done with orefkov method your device will be stuck at a white screen with htc logo and ipl,spl,radio,os details spl should be 1.07.oref now dont worry and just download a new gene rom from this forum and flash it your device will work fine,and do not try to update the Spl again.
regds,
Attached you find all you need to flash cooked ROMs on your Sedna.
This has been on my HDD for quite a long time. I nearly forgot I did this
The package includes:
sspl-1.02mfg-sedna.exe (copy it to your sedna and run it)
HardSPL-1.02-mfg-sedna.nbh (flash it after running the sspl)
CustomRUU.exe (use it to flash the HardSPL)
Once the HardSPL is installed on your device you can flash any ROM.
Have fun,
JockyW
PS: Moderators please make this a sticky. Thanks.
hurray for jocky2001.... finally we got hardSPL
so who else is cooking...? we need help and info and your experience Sedna chefs.
this forum has got to get big.. it is after all a nice big Toy..the sedna
so ill post my experiences and what i find out along the way.. so people can do it too
THANKS jockyw2001...
procedure...
to install hard spl you must do it this way...or at least i did and it worked for me
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-xxxxxx.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
(OPTIONAL, better to skip it! step 7. Have a cigarette. If you dont smoke have a cup of tea)
8. you can now flash the hardspl-xxxxxx.nbh by running CustomRUU.exe. make sure hard spl and custom are in same folder
9. after installing the hardspl you can flash any rom
i did these exactly and it worked for me... when i go into bootloader it says SPL-1.02.HARD ... YIPeee!
to get to bootloader its in this forum somewhere..
thanks JOCKYW2001
i really (really) need a WM5 rom for this device, now we have this can one be ported ?? i REALLY need help with this
im no expert but id say so...just keep the radio from a sedna rom.. it has the drivers i think... and port only a wm5 OS.nb
let me know how u get on....
did u install hardSPL... i did and now i can load any rom so far
do you knowmuch bout this stuff...? do you know how to cook these ROMs .. which tools are you using..i have cooked roms before but with different phones and those tools are not fully working here..
and do you know if you can unlock the Extended ROM..?
let me know... good to have a bit of life here.. i went looking for the HARDSPL and finally got one off jockyw .. olipro would not answer my questions
no never have, all new to me, would be very greatfull if someone fancyied building one for me
as for installing hard SPL, thats later as the battery is flat at the moment.
yeah well id like one to do my work for me too... but im a realist..#
but i like to know how other people got on with theirs .. where they suceeded and failed so i can avoid pitfalls and get my jobs done right...
let me know if you know anything..and how you get on with WM5 ..
and how you hard spl goes... do the steps above and it will work
jockyw2001 said:
Attached you find all you need to flash cooked ROMs on your Sedna.
This has been on my HDD for quite a long time. I nearly forgot I did this
The package includes:
sspl-1.02mfg-sedna.exe (copy it to your sedna and run it)
HardSPL-1.02-mfg-sedna.nbh (flash it after running the sspl)
CustomRUU.exe (use it to flash the HardSPL)
Once the HardSPL is installed on your device you can flash any ROM.
Have fun,
JockyW
PS: Moderators please make this a sticky. Thanks.
Click to expand...
Click to collapse
congratulation.....hehe..thankyou for Jocky
Thanks everyone above,especialy jockyw2001.
I flashed the SPL,so I can cooked any ROM of P6500.
Will this give me a sim unlock?
Rom updateing problem
HELLO, Please anyone help me, I have a HTC P6500, I want to flash it that means current version is windows mobile 6 professional. My product is Orange UK,,,,,I have tried All ROM version but I have failed I have used all types of manhoods. When I click ROM update after going 5% flashing a message is seeing that is your phone can't supported tis software I want to use (Duttys_2.5_5.23144.5.3.10_3.14_HD2_ML_Family_ROM_(V6)_ITA.zipx)..Please give me a ROM software link I mean Italian language or New version Link
please give me a solution for me
sedna 100 hard spl
hi guys n gals,this is my first atempt to do this procedure on my sedna100,i followed instruction to unplug and replug back in,my screen is red-green-blue and whitewith usb in the white section its been like that for a wee while now and not syncing back up,can someone pls help...vrey much appreciated
finally managed it after hrs on google etc...head was in bits....thx jocky
can someone plz give me a link to cooked p6500 sedna roms plz
Trying to flash hard spl onto p6500 so that I can flash the new ROM. CustomRUU keeps failing with Error 262. Restarting the process doesnt work.
My device is stuck on the 4 colour screen with serial/usb title.
Any help would be much appreciated as I have a lot of devices to do, so need to get the first one working first.