Related
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click on the mrvanx guide at the bottom of my signature, it will tell you how to downgrade in the guides.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have been there mrvanx guide. but he don't have the solution to this problem. Just to downgrade the rom to wm5 not the SPL.
mysharif i think we have to shout again.
Help us anybody there we are stuck here.
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
You are great. I hope it will work for my Imate JasJam. Last night I was flashing my ROM with the original ROM but modified with NBH decomplie too by dutty. Before that I wrecked my device as I used the flashing of ROM using the latest sensation of loading the SSPL to RAM by des. That was my mistake that I used the original ROM. Then I removed the USB cable as it was taking too much time and because of danger to my imate I did that. Anyhow I got the NO GSM error but then I ran the Dutty's WM6v2 cooked ROM and it fixes all the things I am using it now.
The reason for my Imate JasJam degrade is my jog is not working according to its function. You know jumping from field to field. I didn't found any of that problem solution till the page of 30 in threads and posts. I am searching but if anybody knows the link. Kindly help me. So that I will save a trip to see the warranty people. (here we don't have ladies receptionists )
Sorry for the stupid question, how do I downgrade from Oli 2.10 to Oli 1.10
Il write a guide on it...too many PMs about this.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
aquasesh said:
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
Click to expand...
Click to collapse
Ofcourse...because flashing an original RUU it doesnt recognise the new bootloader (Hence your 260 error), and HArdSPL doesnt allow itself to be overwritten by a retail RUU. IF you read through the HArdSPL threads you would know this.
mrvanx said:
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
Click to expand...
Click to collapse
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
GreatGrey said:
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
Click to expand...
Click to collapse
Just flash SPL 1.10.oli.......................then flash a vodaphone ROM, dont use 'force SSPL', just use autodetect.
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Pawel062 said:
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Click to expand...
Click to collapse
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
yea your right I just wanted to reduce your work load.
mrvanx said:
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
Click to expand...
Click to collapse
Hi mrvanx, some input to go into your guide (in case you havent come across this yet).
While flashing 1.10Oli under Vista, users may run into a problem where after loading SSPL and the phone goes into (SSPL) bootloader mode, the RUU program cannot detect the phone and returns an error.
This is due to the Vista drivers for HTC USB Sync. The driver needs to be manually "updated" just like in your Vista flashing guide. In this case, while the phone is in SSPL bootloader mode, go into device manager, replace the default HTC USB Sync driver with the USBAS one from your Vista flashing guide.
Then soft reset the phone, and try again. Worked for me.
For some reason, SSPL bootloader may appear as a different device to Windows than the hard/standard bootloader, so even if the Vista procedure has been performed before, it looks like it needs to be done also for SSPL.
My Hermes is still showing No GSM. Please inform me if I got something wrong.
I have tried to upgrade the radio rom from SPL-1.40:
http://forum.xda-developers.com/showpost.php?p=1321011&postcount=1337
That's wrong because HERM_Radinly_1.41.00.10_CustomRUU should be upgrade from SPL-1.04, right?
Because I have stuck on the tricolor screen, so I need to re-upgrade from HERM_Radinly_1.41.00.10_CustomRUU with the same choice of bootloader, right?
And then, I have succesfully upgraded to 1.41.00.10, but also showing No GSM, and the SPL is upgraded to 2.10 olipro after by using HardSPL V7.
And I can see "Upgrade instructions
Just download and execute these to upgrade; however it is recommended that users install HardSPL before flashing these radios.
" in http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms, then...I thought that I have doing right to upgrade the radio rom to 1.43.00.00.
Yes, I have upgraded to 1.43.00.00, but my Hermes is still showing No GSM. So I found from wiki, I found http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick, in the first line of the table, yes, I can boot the OS and no GSM, so I flash Hard SPL and update the rom from 1.43.00.00 to 1.40.30.00, but it showing No GSM also.
Then, I tried 1.07.03.10, no GSM also.
After that, I found I have missed a important sentance, "You can now do radio only upgrades in Bootloaders other than SPL 1.04.". Then, I try to found how can I downgrade SPL from 2.10 to 1.04. Thanks for Martinhdk and shogunmark, http://forum.xda-developers.com/showthread.php?p=1330247#post1330247.
down to 1.10 by choosing bootloader, not success....
after use Force by SSPL, success!!
and then down to 1.04 by choosing bootloader, not success....
first time not success when using SSPL....
second time also....
down to 1.04 by chooing bootloader again....not success
down to 1.04 by chooing bootloader and Hard-SPL....success!!!
Now...not HardSPL anymore!!!!
Then, I downgraded SPL to 1.04 successfully, checked by mtty also. Then, I can start to fix No GSM finally.
And then upgrade to 1.40.30.00 by method of RUU
but I can remember that, Upgrade instructions
Just download and execute these to upgrade; however it is recommended that users install HardSPL before flashing these radios.
install HardSPL V7, and then now is SPL-2.10.Olipro
After that, run HERM_Radinly_1.40.30.00_CustomRUU, choosing SSPL or bootloader version, failured sever times
When choosing the HardSPL and bootloader version SPL-2.10 in the second time....success!! But it is still showing No GSM.....
and... the PPC always cannot detect the USB connection....
What shoud I do now?
Do I made a big confuse on the concept of upgrading?
Please give me a small tip.....I really read many and many threads but....
I just want to use my PPC normally.....
I can see that you have certainly been searching the forums so hopefully others more knowldegable than me will help - rather than tell you to look even more as they so often do here on this site when the problem is simply inexperience for most of us.
In the meantime have you tried following the "No GSM" instructions on the Hermes Wiki here: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5? It looks like this will need even more reading but hopefully it will help. I am afraid I am not familiar with this procedure but others should be able to offer support.
I must admit I thought HardSPL was OK for all radio upgrades - but perhaps you have read more than me.
Good luck
Hello,
Just unlocked both sim and cid, and installed tnt 1933 touch flo rom, no problems on the install, expect for that my cell phone does not work.
I know I might have to update the radio rom, and anyone please explain the procedure and the file needed, read, but confused.
current:
G4
ipl 2.21.001
spl 2.21.olip
gsm 02.25.11
os 11.0.0.1
s.thakur
I just upgrade and notice the bug too. My phone works sometime, but I cant end the call! and some sms are not being rec'd.
TNT.1933 is known to have problems for some Radio ROMs.
Either choose other ROM or try other Radio ROMs until the problem goes away (There is no recommended radio version because it depends on your carrier)
For what I know, this is link to the newest Radio ROM available (2.71.11).
In the thread it's written it is g4 safe.
So I think you can flash it to your device plain and simple.
But I am not pretty sure if you need to use the RUU provided or the Mun's RUU from the Hard SPL thread...
EDIT:
I have flawlessy performed Radio upgrade to 2.71.11
I can now confirm it's g4 safe... just start the romupdateutility and follow the instructions...
No need to change RUU from the one included in rar archive for my G4 HardSPL.
Is there a way I can unlock my hermes whilst keeping the newest radio (1.54.00.10)?
Yes, load hard spl ver.7 on then pick a rom, any rom that doesnt upgrade the radio rom. Most cooked roms don't have the radio cooked in. Happy upgrading.
ultramag69 said:
Yes, load hard spl ver.7 on then pick a rom, any rom that doesnt upgrade the radio rom. Most cooked roms don't have the radio cooked in. Happy upgrading.
Click to expand...
Click to collapse
VERY incorrect reply.
@ TheOracle
The radio version used in pofs unlocker has been modified to allow CID/SIM unlocking so you must use the package provided in the thread there.
I can't seem to find the thread, I'll keep looking though I'm probably being stupid! Thanks for the help =D
Well I've just unlocked the phone again with CID-Unlock V3a, however it's stuck me with Radio 1.16 . Could I still use Herm_Unlock_v3 etc with the newest radio or will it brick if I don't use Radio 1.16?
Here are the steps needed
1 Download and unzip the unlocker. All of the instructions are included on the zip file. Follow it closely. Read the thread for instructions and common mistakes before you do it. The program will install radio 1.16 which you'll replace with step number 3
http://forum.xda-developers.com/showthread.php?t=293665
2. Install hardspl. Use this guide by mrvanx. Very straightforward. Use a computer with xp, avoid vista.
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
3. Download your radio rom here and install.
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Go back to mrvanx guide on installing radios. Read all the threads and understand what is needed for each step to safely upgrade your device. If you're not sure, it's better to ask again on this thread. I hope this helps and good luck
Also, I think you can ask where you bought the phone to get an unlock code? I know at&t will do it with conditions.
TheOracle said:
Well I've just unlocked the phone again with CID-Unlock V3a, however it's stuck me with Radio 1.16 . Could I still use Herm_Unlock_v3 etc with the newest radio or will it brick if I don't use Radio 1.16?
Click to expand...
Click to collapse
I always unlock using the manual method, so for the last step I transfer HERM_Unlock_v3.exe to my device and run it. Click the unlock button, then select sim and super cid unlock.
Follow the steps I've provided, you should be fine
For future reference, here's mrvanx's hermes guide.
http://forum.xda-developers.com/showthread.php?t=299462
If you decide to upgrade your rom as well, the guide will be a great help.
This thread is a supplement to the HardSPL thread, in the unfortunate case that you need to return your phone to Stock specifications (including Stock SPL), and the SPL that came with your phone didn't happen to be the 1.90 version included in the HardSPL thread. I've included the few that I have here, and as I come across others, I'll add them to this post. If anyone else has other versions, feel free to post them here as well.
Each zip file includes the Stock SPL nbh file ONLY. In order to restore Stock SPL, you WILL need the HardSPL package from this thread.
SPL 1.95 - Extracted from AT&T HTC FUZE Stock ROM
SPL 5.05 - Extracted from Official HTC ROM (WWE)
SPL 5.08 - Extracted from AT&T HTC FUZE Test ROM
SPL 5.07 - Extracted from Official HTC ROM - Southeast Asia - Sintel-English
SPL 1.90 (from HardSPL thread) - I added this one just so they're all in the same place.
EDIT: I have tired flashing several of these to my device with no success. It appears there is more that I need to do to extract these SPLs properly. In the meantime, I recommend that you use the 1.90SPL from the HardSPL thread for your warranty purposes. If you would then like to get the stock SPL on your device, re-flashing the stock ROM should accomplish that.
Thanks
Thank you so much. I have been looking for the 1.95 spl for weeks. In fact that was the only thing stopping me from flashing Da G's Windows mobile 6.5 ROM. Also could you send me a Pm with Instructions on how to flash the wm6.5 rom and the 1.95 spl.
Thanks.
assassin82492 said:
Thank you so much. I have been looking for the 1.95 spl for weeks. In fact that was the only thing stopping me from flashing Da G's Windows mobile 6.5 ROM. Also could you send me a Pm with Instructions on how to flash the wm6.5 rom and the 1.95 spl.
Thanks.
Click to expand...
Click to collapse
Before we do that, let's stop there. If you want to flash Da_G's WM6.5 ROM, you need to have HardSPL on your device. You should only be flashing a stock SPL if you are returning your phone, for warranty reasons. Can you clarify what it is you're trying to do?
Also, have you reviewed this thread, so you know how to flash your phone properly?
Thanks for compiling this. Sticky time!
Captain_Throwback said:
Before we do that, let's stop there. If you want to flash Da_G's WM6.5 ROM, you need to have HardSPL on your device. You should only be flashing a stock SPL if you are returning your phone, for warranty reasons. Can you clarify what it is you're trying to do?
Also, have you reviewed this thread, so you know how to flash your phone properly?
Click to expand...
Click to collapse
Yea I have looked at that and I know about having the hard spl. I just don't know how to flash the 6.5 rom. Thanks for your concern though.
StockSPL 1.69
Here is Stock SPL 1.69 from T-Mobile Czech ROM extracted from RUU_signed.nbh with NBHextract.exe a converted with yang back to nbh by following code
Code:
yang -F SPL.nbh -f SPL.nb -t 0x200 -s 64 -d RAPH***** -c 11111111 -v 1.00.000 -l WWE
Some Moderator can move it to first post ;-)
I have HardSPL and it says version 1.90Olinex. I think my stock was SPL 1.95 but i'm not sure. I have the ATT Fuze. I'm having a problem with the G-Sensor and need to send it back for replacement. Can anyone confirm that I need to flash 1.95 for ATT or anything else? Also If I have upgraded the radio, should I downgraded it before send back for replacement or its ok?
Thanks
chukalov said:
I have HardSPL and it says version 1.90Olinex. I think my stock was SPL 1.95 but i'm not sure. I have the ATT Fuze. I'm having a problem with the G-Sensor and need to send it back for replacement. Can anyone confirm that I need to flash 1.95 for ATT or anything else? Also If I have upgraded the radio, should I downgraded it before send back for replacement or its ok?
Thanks
Click to expand...
Click to collapse
When you flash the stock Fuze ROM, your radio will also be flashed. Be sure to follow the instructions in the Hard-SPL thread for returning your phone to stock specifications. When you get to the part about flashing back to Stock SPL for warranty purposes, the 1.95 SPL from the OP here is the one you should use (if you purchased your Fuze in the US after it was officially released - that's what mine came with).
Well, lucky me . I kept shaking the phone and my G-sensor works now. It was stuck on one side and would move. I think I will hold off with the return to stock for now, i really dont want to get refurb replacement.
Thanks for the reply.
assassin82492 said:
Thank you so much. I have been looking for the 1.95 spl for weeks. In fact that was the only thing stopping me from flashing Da G's Windows mobile 6.5 ROM. Also could you send me a Pm with Instructions on how to flash the wm6.5 rom and the 1.95 spl.
Thanks.
Click to expand...
Click to collapse
Please... for your own sake and ours... please read. This has been covered many, many times... I don't want you to end up with a bricked device, and quite frankly, I don't believe this question needs to be answered yet again. Please read, I am not trying to be rude, but if you read, you won't have to ask this question.
Hey Captain,
I'm not sure if I'm doing something wrong, but for some reason the 1.95 SPL file doesn't work. The SPL remains as HardSPL. However, the Stock 1.90 SPL file provided by Onlinex does work. Any advice?
Thanks!
custommsp said:
Hey Captain,
I'm not sure if I'm doing something wrong, but for some reason the 1.95 SPL file doesn't work. The SPL remains as HardSPL. However, the Stock 1.90 SPL file provided by Onlinex does work. Any advice?
Thanks!
Click to expand...
Click to collapse
I'm sure you didn't do anything wrong. I'll look into it. In the meantime, if you just re-flash the Stock ROM after flashing the 1.90 SPL, it should upgrade your SPL to 1.95 (since that's what's included with the Stock ROM). I'll try and figure out what I did wrong.
Great, I'll try it.
ryan_h said:
Please... for your own sake and ours... please read. This has been covered many, many times... I don't want you to end up with a bricked device, and quite frankly, I don't believe this question needs to be answered yet again. Please read, I am not trying to be rude, but if you read, you won't have to ask this question.
Click to expand...
Click to collapse
I couldn't find it. I asked the Captain because he already had the ROm installed and he helped a lot.
SPL extract attempts unsuccessful
I have tried to flash almost all of the stock SPLs I extracted, but I can't get any of them to flash using the HardSPL wrapper. I'm not sure that any of them will work. I've updated the first post with the only method that will probably work to restore stock SPL (unless someone can figure out what I'm doing wrong. I've tried htcRIE, NBHExtract, NBHUtil, & yang, and while all of the SPLs I extracted appear to have been done successfully, when I try to flash them to my phone, none of them are working. I'm getting a connection error with the wrapper. Maybe its not the SPL, but an issue with my phone, I don't know.
At any rate, I believe this thread will probably not serve the purpose for which it was intended, and should perhaps be archived & closed.
My first attempt at helping out appears to have been unsuccessful .
Captain_Throwback said:
I have tried to flash almost all of the stock SPLs I extracted, but I can't get any of them to flash using the HardSPL wrapper. I'm not sure that any of them will work. I've updated the first post with the only method that will probably work to restore stock SPL (unless someone can figure out what I'm doing wrong. I've tried htcRIE, NBHExtract, NBHUtil, & yang, and while all of the SPLs I extracted appear to have been done successfully, when I try to flash them to my phone, none of them are working. I'm getting a connection error with the wrapper. Maybe its not the SPL, but an issue with my phone, I don't know.
At any rate, I believe this thread will probably not serve the purpose for which it was intended, and should perhaps be archived & closed.
My first attempt at helping out appears to have been unsuccessful .
Click to expand...
Click to collapse
As you already suggested, it's probably best to flash back to the stock 1.90 SPL following Onlinex's guide after which one should just install the stock ATT Rom or the other stock roms with the latest stock SPL. This worked for me.
Thanks!
About the stock SPL, i am not sure which is mine. As i am from Asia (Malaysia) , which one should i get?
1) SPL 5.05 - Extracted from Official HTC ROM (WWE)
or
2)Extracted from Official HTC ROM - Southeast Asia - Sintel-English
Captain_Throwback said:
I have tried to flash almost all of the stock SPLs I extracted, but I can't get any of them to flash using the HardSPL wrapper. I'm not sure that any of them will work. I've updated the first post with the only method that will probably work to restore stock SPL (unless someone can figure out what I'm doing wrong. I've tried htcRIE, NBHExtract, NBHUtil, & yang, and while all of the SPLs I extracted appear to have been done successfully, when I try to flash them to my phone, none of them are working. I'm getting a connection error with the wrapper. Maybe its not the SPL, but an issue with my phone, I don't know.
At any rate, I believe this thread will probably not serve the purpose for which it was intended, and should perhaps be archived & closed.
My first attempt at helping out appears to have been unsuccessful .
Click to expand...
Click to collapse
So as far as i understand, it is possible to flash 1.90 SPL to my device although it had 1.69 SPL as a default by T-Mobile!?
To your problem: shouldnt you just restore your stock Radio and stock OS before flashing stock SPL ?
arvin2212 said:
About the stock SPL, i am not sure which is mine. As i am from Asia (Malaysia) , which one should i get?
1) SPL 5.05 - Extracted from Official HTC ROM (WWE)
or
2)Extracted from Official HTC ROM - Southeast Asia - Sintel-English
Click to expand...
Click to collapse
First of all, if you need to restore your phone back to stock, as tvaril noted, you MUST first flash your stock ROM/radio. Once you do that, then you should flash the stock SPL (1.90) provided in the HardSPL thread using the method indicated there.Then, re-flash your stock ROM, and it should restore your stock SPL.
tvaril said:
So as far as i understand, it is possible to flash 1.90 SPL to my device although it had 1.69 SPL as a default by T-Mobile!?
Click to expand...
Click to collapse
Yes, you should be able to flash the stock SPL 1.90 provided in the HardSPL thread, using the method indicated there, and then re-flash your stock ROM, and it should restore your 1.69 SPL.
Captain_Throwback said:
First of all, if you need to restore your phone back to stock, as tvaril noted, you MUST first flash your stock ROM/radio. Once you do that, then you should flash the stock SPL (1.90) provided in the HardSPL thread using the method indicated there.Then, re-flash your stock ROM, and it should restore your stock SPL.
Click to expand...
Click to collapse
i believe you misunderstood his question. he's asking which SPL should he download given that he got his phone in malaysia
i believe that it should be the asia-singtel one. i'm in singapore, and that is the rom that was recently released for our devices. so my guess would be the singtel spl.