Hi all,
I got a 6818 and i tried to upgrade the Latest HP Official ROM from their web site. But no luck that the upgrade is fail. After that, my 6818 hanged on a white screen with a small [HP Invent] Logo , BL1.0.5 show on the bottom of the screen. I tried to run thru this forumn and didn't got any tips.
If their anyone can give me some instructions or steps on how to re-flash my 6818 to work again?
Thanks a lot! Thousand thanks.
Related
Hi All ,
I have a problem with my xda ages ago i tried to flash it to WM2003 and it failed , and now it wont do a tihng except sit in its cradel and charge .. i tried to load a new rom onto a SD Card and it failed because the bootlaoder wont work even when i press the soft reset button can anyone helped me ? . plzz im in dire need of this phone working
love emma xx
No one ?
Already Emailed you back.
Stefan
i have pretty much same problem
So what do you guys get, when you try to flash via SD-Card?
Stefan
Where can I get a new ROM form, please? Got the same original problem, but not got this far yet.
'from' that is!
http://www.romkitchen.de/
Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?
hello everyone,
i have a little problem. i just tryed to flash the d1 rom to my neo. but in the middle of the process i got a bluescreen and everything went down the hill.
the neo just boots till bootscreen and does nothing more. the upgrade.bat included in the rom does not do anything. i just downloaded the fantastic_b4 step 1, in hope i can flash from bootscreen but the file is passwordprotectet and i have no idea where to get the pass from.
any help?
thanks in advance.
consider this solved.
found the solution in the wiki
I updated many roms without problem until today.
Today I updated to 6.5 NHOCBANME, everything works ok until my atom restarts.
The splash screnn is flashing and doesn´t start, at the bottom of the screen red letters says "1.12.00 WWE" "0.00.00 BL"
I´ve reinstalled the old rom and only changes the image of the splash screen.
Anyone can help me, please???
Thanks
If you have an Atom, then you flashed the wrong ROM, the ROM from NHOCBANME is for a HP Device and not for Atoms... I don't know what you can do now, ask some of the more experienced Folks here, or take a look in the Wiki.
Aww..So scare to hear that! You've flashed with wrong ROM.
Hi I have followed this video (youtube.com/watch?v=cvS4EvS0PAw) byfirst installing HSPL 2.8, after that installing MAGLDR. My phone didn't boot into the black MAGLDR menu. It stayed on the white screen with htc on. I've tried as you the guy said in the video to hold down the power button but it won't go beyond this white screen.
I would really appreciate someones help
Many Thanks
Ben
what rom do you run?
you need a .50 rom and not .51
this is the only thing I can think about.