mobile 6.1 on old 2.17 Rom? - Mogul, XV6800 ROM Development

I installed dcd roms and had radio issues, but I loved windows 6.1. Is it possible to get windows 6.1 on the old 2.17 rom??

It's possible, but someone would need to build it. DCD's and no2chem's work is WM 6.1 with a 3.x base. Someone would need to make a 6.1 build with a 2.17 base.

im not updating anything that was based on 2.17 until i fix bugs on the wm6.1 i have out now. but, someone who knows how could convert a wm6.1/3.16 base to 2.17 using the attached XIP.

Your right DCD, and thanks for responding. I am having issues with my mail2web account on the new radio, if someone could take the info DCD provided and apply it for us who need to use 2.17 would be very appriciated

Now, I am learn how to cook ROM.
This may take a long time, so if someone else finish before me then plz share.
Thanks,
Hiromitsu
edit: anybody know the address of OS.nb for titan?
Also, i am completely directionless... I have no idea what to do or where to go or anything. cook rom is very.... lack of documentation like other thing. So this will take a long time try to figure it out on my own
m(_ _)m

where is a link to 2.17? I tried doing a search for it but dont see it posted anywhere

Zenoran said:
where is a link to 2.17? I tried doing a search for it but dont see it posted anywhere
Click to expand...
Click to collapse
2.17 refers to build of original sprint ROM version you see on boot up the mogul. It's latest "official" ROM build by WinMo 6.0; therefore, you use that as base. Maybe use dcd kitchen.
Hiromitsu

Related

hi how do i get SPL 3.5 to run on my Athena?

hi how do i get SPL 3.5 to run on my Athena? so i can flsh up the new Rom ?
hope you can help
thanks
lidan
lidan25 said:
hi how do i get SPL 3.5 to run on my Athena? so i can flsh up the new Rom ?
hope you can help
thanks
lidan
Click to expand...
Click to collapse
You need to download AP 4.0 rom and run it as exactly told in the instructions, Follow them to the letter or you may mess up. Once thats loaded you can either run that rom or try the new AP 5.0 beta. once you have AP 4.0 on your athena you will have SPL 3.5 on as well. However you cant go back to using shipped rom's without using a SPL 3.5 type rom or swapping your SPL back, and I dont know how that is done.
Just read up first before doing anything!!!!
All the best
Jay
thanks
thanks i will look up for the info in hare so i will not have a problem to get it runing !!
lidan25 said:
thanks i will look up for the info in hare so i will not have a problem to get it runing !!
Click to expand...
Click to collapse
No worries, But I cant stress the read the instructions first bit enough. No end of people have had problems by jumping the gun, including me!! I didnt take out my SD card and by the time I had realised what had happened it was to late. You can normaly get the rom onto your athena if you mess up, but you usualy end up without WiFi. so then that has to be sorted. Pawel and Irus have made some very good roms on SPL 3.5 and irus has added an HTC shipped rom if you want to go back to basics.
Jay
AP 4.0 rom
so shud i run this rom update ?? is this Irus Rom ? http://forum.xda-developers.com/showthread.php?t=390328
are shud i be runing on the 6.0 ??
what shud i run if you are me ?
can you post the the link of Irus Rom and what do i need to do so i will have SPL 3.5 on my Athena and will not kill my Athena !!
lidan25 said:
so shud i run this rom update ?? is this Irus Rom ? http://forum.xda-developers.com/showthread.php?t=390328
are shud i be runing on the 6.0 ??
what shud i run if you are me ?
Click to expand...
Click to collapse
I'm not sure if you need WM 6.0 first, but if your ok with flashing roms then do WM 6.0 first!
Ive put the link you need on my post above.
And its a matter of personal choice if you want the roms or not. read the contents of them and make a choice. Pawels roms 4.0 and 5.0 are from the x7510 so about as good as you get. Irus roms are WM 6.1 so also very up to date. You do get a few minor bugs in cooked roms though.
Jay
i am with WM 6.0
i have no need to upged to it !!
but i was on to update to WM 6.1
and if Wifi will not work on AP4 so it is no good for me i need to know whats the best and will not be to bugy thats all !!
i have X7500
is AP 4.0
are Irus
will run on it ?
Flash AP4 - just follow the instructions and it will all work.
AP5 is still beta (but a very good one)
Or you could just flash one of irus' ROMS but I'd recommend AP4
whats the probleme with wifi in AP 4.0? i hare it isnt working
is thare a fix for it ??
lidan25 said:
i am with WM 6.0
and if Wifi will not work on AP4 so it is no good for me i need to know whats the best and will not be to bugy thats all !!
i have X7500
is AP 4.0
are Irus
will run on it ?
Click to expand...
Click to collapse
You misunderstood, if flashing AP 4.0 goes WRONG then you end up with WiFi not working till its fixed! If you do everything right then everything runs well!
You will get a bug or two on any cooked rom, even shipped roms have them. but read the thread and you can see most have a cure!
Jay
As responderman said - it only doesn't work if you don't follow the instructions. Follow them and it works.
If you can't follow instructions don't flash your phone.
Igo 8 will work i did see a post in hare that thay say it may not work have you test'd it do you know any thing on that problem ?
man i think i am in to asking it that i am new with this 1 i had flsh't all my ppc but this 1 i didn't yet so i am like on a bit confused what to do and if i do it what Rom is best i know that i had Kaiser i liket the WM6.1 on it and for me to go beck to WM 6.0 is a big problem thats why i am in to asking all of that thing's !!
I think it's better to unlock only to spl1.2 and not 3.5 because spl3.5 device cannot come back to 1.2 at the moment. With spl3.5, you can only use ap3, ap4, and ap5, not not the stock rom.AP4 and 5 has many unresolved issues at the moment, so some users found themselves having to use ap3 at the end.
A smarter strategy is to go spl1.2, and you can use pk1, pk2, pk3, irus vanilla, irus lite, irus full, irus AP4, stock rom (many versions here), wm5 (technically possible, but I know of only one user who prefers that). Irus ROM is faster than AP4 and 5, according to a user who had used both. SPL1.2 leaves you with more memory too.
Ap5 in spl1.2 will very soon be available. Many spl3.5 users are waiting for the tool to come back to spl1.2, and they would love the chance to make this choice of spl once again.
eaglesteve said:
I think it's better to unlock only to spl1.2 and not 3.5 because spl3.5 device cannot come back to 1.2 at the moment. With spl3.5, you can only use ap3, ap4, and ap5, not not the stock rom.AP4 and 5 has many unresolved issues at the moment, so some users found themselves having to use ap3 at the end.
A smarter strategy is to go spl1.2, and you can use pk1, pk2, pk3, irus vanilla, irus lite, irus full, irus AP4, stock rom (many versions here), wm5 (technically possible, but I know of only one user who prefers that). Irus ROM is faster than AP4 and 5, according to a user who had used both. SPL1.2 leaves you with more memory too.
Ap5 in spl1.2 will very soon be available. Many spl3.5 users are waiting for the tool to come back to spl1.2, and they would love the chance to make this choice of spl once again.
Click to expand...
Click to collapse
whats spl1.10.000?
if i have this what can i do ?
read this link http://forum.xda-developers.com/showthread.php?p=2236522#post2236522
lidan25 said:
whats spl1.10.000?
if i have this what can i do ?
Click to expand...
Click to collapse
Mate read this page! http://forum.xda-developers.com/showthread.php?p=2236522#post2236522
This guy had the same problem as you because he did not read the instructions
He solved it by reading the wiki and the links referenced.
We have told you what you are doing wrong as it is a common mistake.
Stop whinging and start reading!
My 2 Cents
Have a look at all the info on the several flavors of rom available for the Athena based decvices, choose the rom you feel fits your needs, take your time and follow the instructions (what ever rom you choose have a look at the ap4 wiki because it covers some issues that are WM6.1 related and are not AP4 unique) as with all cooked roms there may be some issues but if you follow instructions you should be fine (as already stated if you go with AP4 and upgrade to the new SPL 3.5 you can't go back for now, the AP team is working on a path back to the factory roms).
Cheers
BR

Cleanest/Most Popular 6.1 rom as of 2DEC08??

I'm a newbie here and considering the purchase of a used X7500 with WM6.0. The current owner has a problem with the bluetooth not functioning. I'm wondering if this might be a common problem with 6.0 and if the new cooked 6.1 (4 – if that’s the latest rom version) might solve such an issue?
Also, would someone mind directing me to the page that has the most popular /cleanest 6.1 rom? I’m tearing my hair out trying to figure out which is the safest/best one to use. I realize that such questions have been asked before, but it's still a big job trying to sift through all the possibilities. Perhaps a sticky including an on-going tally chart with download frequencies or something, together with tags that users could add about what issues their hoping to overcome with the ROM download?? Just a suggestion...
Peter (Bamse1)
Hard to say....
LATEST usually is better, generally speaking we have to choose FIRST the SPL
Unlocked AThena means SPL 1.2. The newest ATHENA (X7510) needs more ROM space so AP4 Team developed the AP4 ROM TOGETHER with a tool to increase the ROM space, and the SPL becames SPL 3.5.
WARNING: you can flash ONLY SPL compatible ROMs, this means NO ORIGINAL ROM is SPL 3.5 . You have to revert it back to 1.2 to flash any official rom
We have a sticky thread here with the ROM links, ALL WM6 or 6.1
Latest Micky's (5.1, 6.1) are the best (IMHO) 6.1 latest is WM6.1, stable build with manila 2d and newest Internet Explorer , little less stable than 5.1, rock solid. I use SPL 3.5, I like to have ALL the utility needed into the ROM.
You can choose sogarth base AND sogarth kitchen to do-it-yourself or IRUS lite-vanilla ROM (the AP4 vanilla)
I will suggest this roadmap:
Start with IRUS spl 1.2, then
Flash AP4, latest AP team release an you will have the SPL 3.5 too
Then check sogarth, or Irus Vanilla-Lite release
Michy 5.1 or 6.1 to check the manila 2d and the increased responsiveness
Wait for the next michy's release if you want really lite and newest build
Thank you for replying so quickly Sergiopi. Still, the lingo is a bit overwhelming for a newbie like me. For instance, one issue is confusing: You write that SPL 3.5 is intended for the X7510 but later on your roadmap you suggest AP4 (including SPL3.5) for the X7500. To confirm, this will not harm the X7500, correct?
If I understand half of what you say then I may 'liberate' the UNLOCKED X7500 with an OEM WM6.0 (from HTC) by
1. Flashing IRUS SPL 1.2 (No turning back now right?)
2. Then flashing AP4 (Question: is AP4 WM6.0 or 6.1?)
3. Here it gets confusing for me. If I understand correctly then "sogarth, or Irus Vanilla-Lite release Michy 5.1 or 6.1 to check the manila 2d" are all different update versions stemming from AP4?? For instance is Michy 6.1 a 'cooked' version of WM6.1, along with the rest of them?
I don't need everything tweaked to the max, just a stable and reliable system that has all the functionality the X7500 is capable of together with the basic apps... a modest aim don't you agree?
The cream on top would be to replace the stylus with TouchFLO 3D - is this possible with one of the cooked roms you mention? However, this is not really necessary - kind of gimmicky from one point of view I suppose. In fact, did I read somewhere that FLO actually slows things down?
bamse1 said:
Thank you for replying so quickly Sergiopi. Still, the lingo is a bit overwhelming for a newbie like me. For instance, one issue is confusing: You write that SPL 3.5 is intended for the X7510 but later on your roadmap you suggest AP4 (including SPL3.5) for the X7500. To confirm, this will not harm the X7500, correct?
Click to expand...
Click to collapse
SPL 3.5 is needed on X7500 to have the newest features in the ROM
bamse1 said:
If I understand half of what you say then I may 'liberate' the UNLOCKED X7500 with an OEM WM6.0 (from HTC) by
1. Flashing IRUS SPL 1.2 (No turning back now right?)
2. Then flashing AP4 (Question: is AP4 WM6.0 or 6.1?)
3. Here it gets confusing for me. If I understand correctly then "sogarth, or Irus Vanilla-Lite release Michy 5.1 or 6.1 to check the manila 2d" are all different update versions stemming from AP4?? For instance is Michy 6.1 a 'cooked' version of WM6.1, along with the rest of them?
Click to expand...
Click to collapse
If you have a "STOCK", SIM unlocked X7500, to flash a non official ROM you need to flash the SPL 1.2 FIRST ( http://forum.xda-developers.com/showthread.php?t=316846 )
THEN you need to upgrade the radio 1.57 or 1.58, I am using 1.57 http://forum.xda-developers.com/showthread.php?t=372904
THEN you can flash the newest OS, (ALL cooked ROM are OS only, no RADIO, even if I am not sure about radio in the sogarth one, and the newest RADIO is needed by WM 6.1)
1) SPL 1.2 comes from Athena Wrapper, you can revert back but isn't easy for a newbie..
2) AP4 shoulh be WM6.1 OS check the thread Michy's are WM6.1
3) NO, IRUS vanilla comes from AP4, sogarth ? (may be they used some common base ROM) michy's aren't from AP4
bamse1 said:
I don't need everything tweaked to the max, just a stable and reliable system that has all the functionality the X7500 is capable of together with the basic apps... a modest aim don't you agree?
The cream on top would be to replace the stylus with TouchFLO 3D - is this possible with one of the cooked roms you mention? However, this is not really necessary - kind of gimmicky from one point of view I suppose. In fact, did I read somewhere that FLO actually slows things down?
Click to expand...
Click to collapse
Touchflo 3d isn't available for athena, Manila 2d looks like (and works like) T3D, reducing available RAM and slowing down the system
Start testing, from your requirements I think you will like Michy's 6.1 (play with T3D clone and disable it after a while ) and the announced Michy's vanilla. AP team announced some news, but it was one month ago and they are still testing...
Well this certainly helps dry up the mist! The point about the radio seems like an important addition. I'm still not clear about one point however:
2) AP4 shoulh be WM6.1 OS check the thread Michy's are WM6.1 ... 3) NO, IRUS vanilla comes from AP4, sogarth ? (maybe they used some common base ROM) michy's aren't from AP4
Click to expand...
Click to collapse
Again, my primary aim is to get the cleanest and most fully-functional version of WM6.1 with the least amount of steps or tweaking. Assuming that A4 is 6.1 (haven't checked yet) then why is it necessary (or preferable) to flash sogarth, or the Irus Vanilla-Lite release (of A4) AND, then, add Michy 6.1 (to check the manila 2d?) which is also 6.1? It sounds like Michy's 6.1 is the way to go (with or without the T3D clone) but I don't understand why you suggest to flash sogarth/IRUS Vanilla first? Is it to get 2D? But elsewhere you suggest that Micky 6.1 includes 2D? Finally, you also suggest adding the announced Michy's vanilla... Can I do this and bypass sogarth/Irus Vanilla-Lite? I guess I'm still not clear about the difference between A4 (sogarth/irus vanilla) and Michy's work, and how or why these apparently need/should coexist on the STOCK Athena/Advantage X7500 (ie. NOT Ameo/simlocked)?
There is another question about adding apps once the cooked ROM 6.1 has been installed. Somewhere I read that these ROMs don't allow new apps, so you need to get it right the first time or redo the entire process. Is this correct? I suppose the cooks have taken this into account with their ROMs, which is perhaps one reason behind their multiplicity?!
I appreciate your patience! This is all new stuff and I'm still trying to get my head around it.
I also wish to add a private message quote from Brau0303 on the topic that helps nuance the discussion:
We were all noobes at some point so no worries. As to the best rom (my friend that is purely subjective, I was fond of the AP Teams rom and the work done by MichyPrima, you will find two main flavors of rom for the Athena, roms intended for the normal 1.2x SPL and those intended for the 3.xx SPL the custom SPL/unlocker is required for any non factory rom flashing and the main difference between 1.2x & 3.xx SPL is 1.2x retains the factory rom flash partition, 3.xx re-partitions the rom flash area to allow for larger roms like AP-4 and above. you must be careful and please read all the documentation prior to flashing or you could damage your Athena.
Click to expand...
Click to collapse
This leads me to a new question: Is there any value in retaining the factory rom partition or is it a no-brainer to reclaim the space with a 3.X partition? In other words, is it possible to have WM6.1 with the factory partition in place, e.g. in case one may want to reset the device to a factory setting for resale purposes?
bamse1 said:
Well this certainly helps dry up the mist! The point about the radio seems like an important addition. I'm still not clear about one point however:
Again, my primary aim is to get the cleanest and most fully-functional version of WM6.1 with the least amount of steps or tweaking. Assuming that A4 is 6.1 (haven't checked yet) then why is it necessary (or preferable) to flash sogarth, or the Irus Vanilla-Lite release (of A4) AND, then, add Michy 6.1 (to check the manila 2d?) which is also 6.1? It sounds like Michy's 6.1 is the way to go (with or without the T3D clone) but I don't understand why you suggest to flash sogarth/IRUS Vanilla first? Is it to get 2D? But elsewhere you suggest that Micky 6.1 includes 2D? Finally, you also suggest adding the announced Michy's vanilla... Can I do this and bypass sogarth/Irus Vanilla-Lite? I guess I'm still not clear about the difference between A4 (sogarth/irus vanilla) and Michy's work, and how or why these apparently need/should coexist on the STOCK Athena/Advantage X7500 (ie. NOT Ameo/simlocked)?
There is another question about adding apps once the cooked ROM 6.1 has been installed. Somewhere I read that these ROMs don't allow new apps, so you need to get it right the first time or redo the entire process. Is this correct? I suppose the cooks have taken this into account with their ROMs, which is perhaps one reason behind their multiplicity?!
I appreciate your patience! This is all new stuff and I'm still trying to get my head around it.
Click to expand...
Click to collapse
VANILLA-LITE SPL 1.2 means the cleanest, and no needs for SPL 3.5, BUT is an OLD WM6.1 Build. It means NO newest Internet Explorer, NO enhanced contact/messaging, NO rotation sensor enabled and some other bugs
SPL 3.5 means more complete ROM (more space, more built-in utilities) and a LATEST OS Build is commonly better
ALL ROMs allow the installation of new applications (may be you mean UPDATED version of the built-in applications isnt allowed, but a good chef knows the problem and use some tricks)
SPL 3.5 is a two way road, you can go back. My suggestion was... YOU choose the best ROM, and start testing (and stop talking ) flash some ROM and you will have more experience (and less questions )
Let me also add Lakeman's message reply:
I like michys roms and usually play with his latest creations. michy4.1 is reportably the most stable. there is a thread by sergiopi with links to all the roms at the top of the winmobile6 forum and i would recommend reading the beginers guide I wrote as well
Click to expand...
Click to collapse
Also, thanks for your consistent replies sergiopi. One comment: I don't own a X7500 yet so unfortunately I can' t begin experimenting. In fact, I want to avoid experimenting by writing and talking on this forum! Isn't that the smart thing to do anyway, rather than brick a device?
Here is a recent follow-up from Brau0303. I asked him to clarify what the SPL is:
Yes much of this can be overwhelming, SPL is not actually directly part of the device OS (think of it more as a bios type component) and you have to have the special versions of the SPL to unlock the ability to flash custom roms) I think the upgrade to 6.1 is worth it. many of the basic roms will work on a spl 1.20 olinex device, but the more feature rich roms that are based on the x7510 version require the 3.xx spl because it re-partitions the flash rom space. hope this helps.
Click to expand...
Click to collapse
You can also read more about SPL here: http://forum.xda-developers.com/showthread.php?t=296432
and of course the wiki here: http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
Hi Brau0303, I've taken the liberty to post your reply on the public thread. I hope you don't mind. In the process I came up with a new question: is there any value in retaining the factory rom partition or is it a no-brainer to reclaim the space with a 3.X partition? In other words, is it possible to have WM6.1 with the factory partition in place, e.g. in case one may want to reset the device to a factory setting for resale purposes?
Click to expand...
Click to collapse
Response from Brau0303:
Well if you go the way of spl 3.x you can only flash roms intended for 3.x, cmonex created a utility that allows you to go back to the spl 1.2x and standard factory settings/partition. I can say that it does work because i used it when I sold my Athena.
Cheers, BR
Click to expand...
Click to collapse
have that much clear now. Thanks BR. I guess the main issue for me now is wading through all the lingo to decipher what cooks refer to when they label their ROMS (which ones go with which device/rom series). One question that is still bugging me - what is the relationship between AP4 and Michy 4/5/6? Sergiopi suggested that I flash both, but doesn't one overwrite the other? They are both ROMS correct? (As you write below, I only need one rom.)
Originally Posted by bamse1
Again, thanks for your reply. I noticed in your signature that it appears like you're running a cooked SPL with a stock ROM. I didn't realize it was possible to change the SPL alone and run a stock rom, if I am assuming correctly. What is the advantage of that may I ask?
Click to expand...
Click to collapse
Originally Posted by Brau0303
Cheers, Peter
Well as I had said the SPL is not tied directly to the rom, the special spl allows you to flash cooked roms, you can not flash them with a stock spl (only allows flashing of released factory roms) here are the main components
SPL - loading the special spl version allows you to flash cooked roms (you can install this and still run stock roms)
Radio - you can flash a radio version without having to flash any other stuff (some roms require certian radio versions)
ROM - contains the WM OS and all the others required drivers and programs and such
Cheers, BR
Click to expand...
Click to collapse
Checking SPL
Hi mate
I thought I would answer your pm here
You need to have the phone in your hands to do this , but from the beginners guide
http://forum.xda-developers.com/showthread.php?t=429013
"Check Bootloader Screen
Throughout this forum you will be referred to your SPL.
This is the Secondary Program Language and on your unadulterated ppc it will be 1.1
Olipro's original unlocker upgraded this to 1.1x but the unlocker above will change it to SPL 1.2
You can see if this has already been done by putting your phone into the Bootloader screen.
This is done by holding the camera button completely in and then pressing the reset button.
You will now see a red/green/blue and white striped screen telling you the device id and SPL version.
If you see SPL 1.2 , you are good to go to load any SPL 1.2 Rom"
further to this you may also see SPL3.5.
If you have this you can only flash SPL 3.5 roms
The bootloader screen is also where you can see what radio is installed
AP4 stands for Athena Project rom no 4
there is supposed to be AP5 in the works.
regards Michael
Hi Lakeman,
Thank you. Your post helps clear things up even more. I think I understand the progression from SPL 1.2 to 3.5 as well as the Radio upgrade. But Im still confussed when it comes to the what I think is the ROM side: AP4/5, Michy, and IRUS/vanilla... and left with 1-2 questions:
-Several have seemed suggested Michy 4/5/6 on top of or together with AP4/5 (see earlier posts). Sergiopi also mentioned a Sogarth or Irus Vanilla-Lite release. I'm just not clear about how these fit together, or if they should fit together. For instance, doesn't one rom overwrite the previous?
- Also, are AP4/5 and Michy 4/5/6 all SPL 3.5 versions? Does it matter?
I guess my main issue now is wading through all the ROM lingo and labels and how these (apparently) are used together.

Do I have a new VZW STOCK radio and rom?

I just received a replacement phone from VZW and it appears to have a stock radio/rom that I cannot find the in the community.
From the right side of the boot screen:
P DCBBPZM-615010
R 1.03.09V
D 1.08
From the bootloader (tri-color) screen:
SPL-0.40.0000
From the About screen in Settings:
Windows Mobile 6.1 Professional
CE OS 5.2.20769 (Build 20679.1.4.5)
I was able to rip the flash memory from a tutorial on this site (link) but I have still yet to find a tutorial about dumping the radio. I have been doing searches on here and on PPCGeeks, but I have not found what I'm looking for. Does anyone have any help they can give?
Thanks to Mattheyu and CheezWiz on PPCGeeks for the help so far.
Link to the thread relating to this on PPCGeeks: link
would love to try a new tp radio
You can't extract a radio from a dumped ROM.... All radios are extracted from Shipped ROMS.
metalmayhem said:
You can't extract a radio from a dumped ROM.... All radios are extracted from Shipped ROMS.
Click to expand...
Click to collapse
I know for a fact that all of them aren't extracted from shipped ROMS. I know that they include them, but if you look at my first post I have the raw files dumped from my phone's memory, not just the ROM. If these raw files do not include the radio, then I would be happy to learn how to dump the radio as well. I know it can be done, I just don't have the means to do it.
just to let you know this radio is already dumped and you can use it on the tp for cdma. not sure about gsm though. i really really want a dumped shipped rom of alltel or just even the stock radio would be fine.
psycho_maniac said:
just to let you know this radio is already dumped and you can use it on the tp for cdma. not sure about gsm though. i really really want a dumped shipped rom of alltel or just even the stock radio would be fine.
Click to expand...
Click to collapse
You and me both brotha, I have a feeling now that the merger is in full swing, us Alltel peeps wont be seeing any new ROM updates or new devices. I really hope I'm wrong though.
As you mentioned psycho_maniac, VZW has released an update that was leaked to the community. I'm not giving up my pursuit, but now it has turned from me wanting to give a new radio to the community, to how much I can learn about this stuff. If anyone has any adivce on the use of QMAT, please feel free to give it.
I wish you two, and all other alltel customers luck on getting an alltel update.

Rom going to expire

I flashed my phone (HTC Fuze) and I am getting a message that is is going to expire. Is there a cab or registry setting that I can change keep the rom or do I need to flash to a new rom?
matarkin said:
I flashed my phone (HTC Fuze) and I am getting a message that is is going to expire. Is there a cab or registry setting that I can change keep the rom or do I need to flash to a new rom?
Click to expand...
Click to collapse
you need to give more information. we can't read minds anymore.. that's a special version of the phone that's not given out to the public. what rom did you install, etc..
it was a 6.5 rom I found on xda. its build 21189.5.0.0
matarkin said:
it was a 6.5 rom I found on xda. its build 21189.5.0.0
Click to expand...
Click to collapse
Still need a bit more info. Who was the cook of this ROM?
its rom wwe 5.08.502.1
Its all thats in the device info. I flashed it months ago so I dont remember any more info.
matarkin said:
its rom wwe 5.08.502.1
Click to expand...
Click to collapse
I still can't place the ROM you flashed. Just flash a different 6.5 ROM. Theres plenty to choose from.
Any rom that is 21215 or older was a final build and was not time bombed to expire, so flash a rom of 21215 or later and you should not have any problems.
5.08.502.1 was the AT&T Test ROM ... if you are looking for a stock rom, flash the latest version (5.11.502.2).
Otherwise, go with the recommendations in the previous posts as they are all excellent choices.
Cheers,
Uh, considering that you don't know the rom you're using or even which series it is (6.1 vs. 6.5), you should be very careful before the next flash. If, as Hilaireg said, you have the ATT test rom, then I suspect you may have flashed it without ever flashing hard spl. Unless you flash the newly released ATT rom, you will need to flash hard spl first. If you don't know what hard spl is, then, yes, you don't have it and you'll need it to flash any 6.5 rom.
You flashed a WM6.5 beta ROM (21189) which didn't have the timebomb removed by the cook. The 5.08 part means that it used the OEM drivers from the AT&T 5.08 stock ROM. Simple as that.
Anyways, just flash a newer (non-beta) WM6.5 ROM, as stated earlier.

[Q] Help with Cooking

Hello, downloaded a WinMo 28244 build for my HD2 and imported in OsKitchen along with a v3.14 ROM WWE. So will my cooked ROM work on HSPL or do I have to select some other base ROM to work on HSPL?? I dont want to cook a ROM which needs SPL 3.03 to work since I have HSPL and I enjoy it..
[The Punisher] said:
Hello, downloaded a WinMo 28244 build for my HD2 and imported in OsKitchen along with a v3.14 ROM WWE. So will my cooked ROM work on HSPL or do I have to select some other base ROM to work on HSPL?? I dont want to cook a ROM which needs SPL 3.03 to work since I have HSPL and I enjoy it..
Click to expand...
Click to collapse
way not SPL 3.03? nothing wrong with that.
Just use SSPL_RUU.exe for installing it and all is fine.
SPL 3.03 is working fine so do also Radio 2.15.50.14.
Edit way opening two threads with the same question? and adding the same question in a third thread? I mean ons will be enough no?
and just a question about the WM build. Way you choose the 28244 build instead of 29007? just a question.
@ OP,
This is now your main thread. The duplicates have been closed. Good luck with getting help with your question.
WB
kurt-willems said:
way not SPL 3.03? nothing wrong with that.
Just use SSPL_RUU.exe for installing it and all is fine.
SPL 3.03 is working fine so do also Radio 2.15.50.14.
Edit way opening two threads with the same question? and adding the same question in a third thread? I mean ons will be enough no?
and just a question about the WM build. Way you choose the 28244 build instead of 29007? just a question.
Click to expand...
Click to collapse
Didn't know exactly where to create this thread.. Whether in Q&A or in Chefs' section. Moving on, read many posts stating that 28244 build has better battery life. Please feel free to suggest me any other build which has advantages over it may those be performance wise or visually. Also, I prefer HSPL as it gives more control on flashing 'Splash Screens' or 'Radio' separately. So again, will I be able to use 3.14 with HSPL without the SPL 3.03 without any performance issues?? Or should I choose another base ROM to start with?
wacky.banana said:
@ OP,
This is now your main thread. The duplicates have been closed. Good luck with getting help with your question.
WB
Click to expand...
Click to collapse
Thank you
Build 2905 and 2907 are very stable and fast. (I don't have the impression that thy consume a lot.)
But personally if you would use the latest stock ROM 3.14 I would more suggest you SSPL than HSPL.
Honesty the included radio is good, spl 3.03 (beside the fact it isn't compatible with HSPL) is okay, and about the Splash screen, pff well what to say, peoples used there phone if it's turn on, the splash screen is a fraction of a moment that you will see it, and peoples don't wait to have a nice splash screen but preferring a nice, stable and fast ROM.
Thanks Kurt for your input. I will have to consider these points as well

Categories

Resources