Related
Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
rob_milton said:
Hi,
I am new to this site...
I have a Cingular 8525 which is a recent upgrade from a Cingular 8125. I installed MSVC 1.5 on my phone and then installed the upgrade to MSVC 1.6.
I just purchased a Jawbone BT headset, and basic linking/use is fine.
However, I was under the impression that I would be able to use voice to dial through the headset. This doesn't seem to be the case.
After doing some searching here I have come across a reference to a '09f fix' or '09f tweak' several times, but I can't seem to find any more information about this.
Can someone point me to more information / access to this '09f' fix or tweak?
Thanks,
Rob
Click to expand...
Click to collapse
Hey Since you're new I'll provide a link. It should be located somwhere on this page in this thread. BT Voice Command something or other
http://forum.xda-developers.com/showthread.php?t=283412&page=32
Give a man a fish and he eats for a day. BUT!!! Give a man a fishing pole and he eats for the rest of his life.
Check out this wiki. You can find just about everything you are looking for here.
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
When you get everything all hooked up join us in the Jawbone thread. I'd like to hear your experience with it. I'm gonna test mine today with the sunroof back and drivers window down doin 80+...see if they can hear me now!
X
p.s. IF you have issues getting it to work there are some great tips in that entire thread. It's great reading...especially when you get it to work in the end. BOO YA!
Xultar,
Thank you for the response...
I am finding it interesting to read through all the information on this site. I had already spent a lot of time in the WIKI that you referenced.
I guess I'm just dense, but I still can't find the file 0.9f (.cab ?). The thread you referenced says download it. But it doesn't say where? I can't seem to find it anywhere on this site or by Googling...
Can you point me in the right direction?
Thanks,
Rob
Ok... I finally found the 0.9f cab...
The instructions say to 'run' it. I don't know how to 'run' the cab file?? I unzipped the zip file I downloaded. What do I do with the cab file?
Thanks,
Rob
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
rob_milton said:
Hmmmm....
Ok.. found you can just copy cab file to phone and double click...
I've gone through the steps detailed in the thread you referenced, but no luck...
When I push the button on the headset a dialog pops up on the phone asking if I want to run BTVoiceCommand. The phone locks up at this point...
Any thoughts?
Click to expand...
Click to collapse
There should be an icon in your program menu for BT Voice command config
enable it I sent my VC duration to 20. In the bottom left corner it should say version 0.0f
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
rob_milton said:
Thanks for the time and assistance...
I did have the program enabled, and the version said 0.9f. However, when I would push the button on the headset to activate VC the following happened: VC would activate (I'd see the icon and hear a tone in the headset). But then a warning dialog would appear that asked if I wanted to run BTVoiceCommand.exe. At this point the phone would lock up. The dialog offered 'Yes' and 'No' buttons, but I couldn't click either. No function on the phone would work at this point.
I'm sure I'll come back to this in the future. But I tested the Jawbone, and I've decided to take it back. It is fantastic at general noise reduction. But it is TERRIBLE at handling wind noise. I drive a Jeep with the top down. I need to find a device that specializes in handling wind noise.
Thanks again for you help...
Click to expand...
Click to collapse
Actually no headset can handle wind noise very well.
About MS VC 16 and 0.9f...A hard reset may be necessary but if you want it to work...and it does a hard reset is worth it. For what it is worth 0.9f works in general with all BT headsets.
Good luck
X
I can say that it works great with the SE DS970
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.
Hi
I downloaded from HTC website the hotfix for bluetooth
Kai06492.CAB I installed the file and deleted the cab file now I have an icon showing the hotfix as a program!!
I have deleted the cab and soft reset my phone and i still have the icon on my program files.
does anybody has the same problem? how can I delete it from my programs
Thanxs
the icon in the programs menu is just a shortcut (in /windows/start menu/programs/) im sure you can just delete the shortcut and have it gone from the menu
defaultdotxbe said:
the icon in the programs menu is just a shortcut (in /windows/start menu/programs/) im sure you can just delete the shortcut and have it gone from the menu
Click to expand...
Click to collapse
Thank you very much!
I haven't heard of such a fix before. Does it work? I went to the HTC site and could not find it. I searched this whole site and could not find it. Does anyone have a copy please.
AGY said:
Hi
I downloaded from HTC website the hotfix for bluetooth
Kai06492.CAB I installed the file and deleted the cab file now I have an icon showing the hotfix as a program!!
I have deleted the cab and soft reset my phone and i still have the icon on my program files.
does anybody has the same problem? how can I delete it from my programs
Thanxs
Click to expand...
Click to collapse
From the name of the CAB and from this post, http://forum.xda-developers.com/showthread.php?p=1750060 it appears that this is for the Kaiser. Can anyone confirm that this works for the Titan/Mogul? If so, this might be the Holy Grail to get Bluetooth working on my PPC-6800.
Has anyone tried this, and can confirm or deny if this fixes any Bluetooth issues on their Titan/Mogul?
what bluetooth issues are we talking about now (since 2.17 came out, my BT has been perfect)?
Dishe said:
what bluetooth issues are we talking about now (since 2.17 came out, my BT has been perfect)?
Click to expand...
Click to collapse
I haven't had my Mogul that long, but with the DCD 1.6.10 kitchen and either my Blueant Z9 or my Plantronics 510, I sometimes lose my BT connection if I have my headset in my right ear and the phone on my left hip or even in my left inside jacket pocket.
With MSVC 1.6, about half the time I get asked to repeat my command, but it never accepts the repeated command. I think this is the same problem as VC confirmation, which is known not to work on the Mogul.
When VC does understand my command, it takes 5-10 seconds before it repeats it back and acts on it, and most times the voice is very low volume and scratchy.
To JimSmith94,
FYI...
Bluetooth radio waves do not travel through water and since the human body comprises of 70% water, you may lose signal if your BT headset and phone are located on opposing sides of your body.
I wear mine on the same side and never lose BT signal...
xweaponx said:
To JimSmith94,
FYI...
Bluetooth radio waves do not travel through water and since the human body comprises of 70% water, you may lose signal if your BT headset and phone are located on opposing sides of your body.
I wear mine on the same side and never lose BT signal...
Click to expand...
Click to collapse
Yes, I am aware of how Bluetooth works. The point I was trying to make, but apparently didn't, is that I had none of these issues with MSVC 1.6 and my PPC-6700. It seems that Bluetooth in general and MSVC specifically don't work nearly as well on my Mogul as they did on my Apache.
If no one else has these issues with the Mogul, could this be a kitchen issue, or a hardware problem that I need to talk to Sprint about, and see about swapping out my phone?
JimSmith94 said:
Yes, I am aware of how Bluetooth works. The point I was trying to make, but apparently didn't, is that I had none of these issues with MSVC 1.6 and my PPC-6700. It seems that Bluetooth in general and MSVC specifically don't work nearly as well on my Mogul as they did on my Apache.
If no one else has these issues with the Mogul, could this be a kitchen issue, or a hardware problem that I need to talk to Sprint about, and see about swapping out my phone?
Click to expand...
Click to collapse
The BT drivers on the titan do not work as it should and M$VC 1.6 does not work with WM6 as it should either, if you search around you will find this to be true from day one.
So, a few days ago I flashed to the 2.2.1 (and radio 3.27) release (thanks so much for all your work dcd!). I didn't really notice until today that the vibrate function isn't working. I hopped on here and searched around and came up with nada... other than 2.2.3 was released. Flashed up to that, same thing. Everything seems to work fine other than vibrate.
Anyone have any ideas?
Are you sure the vibration motor is functioning? For instance when you power it on does it vibrate for a split second?
it doesn't, that's actually how I noticed that it wasn't working.
Did you do any registry hacks or use any apps to disable the flashing LED? The vibrate function is tied to the LED flashing and disabling it in certain ways will kill the vibrate functionality with it.
negative... I have a clean install of 2.2.3 with no hacks or modifications applied to it. in my searching yesterday, I came across references to HKLM\SOFTWARE\OEM\VIB and \HKLM\Drivers\BuiltIn\AllLEDMgr but neither of these had any impact.
I had this same issue and the only workaround that I came across was to hit ok when closing the email program instead of closing it by tapping on the X. One other workaround is if you use programs like SPB Pocket Plus, add the tmail.exe to your close exceptions and vibrate will work as normal.
Hope this helps
No problems here with Vibrate
Only programs I have loaded other than the 2.2.3 rom are SPB Phone Suite and PointUI 1.02B.
I am really hoping this is something that can be fixed, I really don't want to have to flash back to stock and get a new one under warranty.
If you soft-reset your phone, does it do that quick vibrate? If so, hardware is intact
bimmerd00d said:
If you soft-reset your phone, does it do that quick vibrate? If so, hardware is intact
Click to expand...
Click to collapse
(see above) nope, no quick buzz
N715DP said:
(see above) nope, no quick buzz
Click to expand...
Click to collapse
aye, my fault. It's still early and I haven't started reading yet. That sucks about your vib, Has to be a hardware fault. i thought i had my first contribution to XDA with this one, thanks for shooting it down.
sorry about that, I am sure you'll get one soon
Great release but I found some bugs:
1.
When I hang up an incoming call on my bluetooth headset the customised ringtone is back to standard????
2.
When I hang up an incoming call on my bluetooth headset the volume is set to zero and I have to manually turn it back on....
3.
Wifi is not working with my current radio 1.57.00.
Cheers and any fixes are welcome,
HJ
All of the above problems are still here after a hard reset......any suggestions?
I have the problem that the icons in the sms/mms textmessage not work. Realvga is a just in 96 dpi. By other DPi standaards i don't have that problem I have no problem with other things.
Media Player hangs the device if try and start it
96dpi
guido oskam said:
I have the problem that the icons in the sms/mms textmessage not work. Realvga is a just in 96 dpi. By other DPi standaards i don't have that problem I have no problem with other things.
Click to expand...
Click to collapse
I believe this is a known issue with the RealVGA App.
Cheers
BR
Brau0303 said:
I believe this is a known issue with the RealVGA App.
Cheers
BR
Click to expand...
Click to collapse
Oke it's a problem with realvga. what can i do abou it. where can i find the icons. Maybe i can replace them
Before reporting bugs, please ensure you're on the new ROM then hard reset. You should perform a hard reset regardless of bugs or not to avoid some issues. Hope this helps some. Also, please update your posts and let others know if you actually did a hard reset after flashing and confirming the 4.0 installation or if the bug was discovered without doing the hard reset.
hellejoep said:
Great release but I found some bugs:
1.
When I get a call while my bluetooth headset is connected it is only transferred to the headset if I pick it up on my bluetooth headset; if I pick it up on my Athena it is transferred to the speakerphone.
HJ
Click to expand...
Click to collapse
its supposed to be like that. it assumes that if you are answering it from the phone and not the headset then you don't want the headset.
Small things:
-No automatic softreset after HR configuration. Is this normal, or is this aborted because of No SIM-Card screen (cancel)? Did HR with SIM Card and still no automatic Softreset like usual.
-Device popups (start menu) do have a small delay. Is this normal?
EDIT: No wktask problem
ltxda said:
Before reporting bugs, please ensure you're on the new ROM then hard reset. You should perform a hard reset regardless of bugs or not to avoid some issues. Hope this helps some. Also, please update your posts and let others know if you actually did a hard reset after flashing and confirming the 4.0 installation or if the bug was discovered without doing the hard reset.
Click to expand...
Click to collapse
Done, see the results in my first post.
ltxda said:
Before reporting bugs, please ensure you're on the new ROM then hard reset. You should perform a hard reset regardless of bugs or not to avoid some issues. Hope this helps some. Also, please update your posts and let others know if you actually did a hard reset after flashing and confirming the 4.0 installation or if the bug was discovered without doing the hard reset.
Click to expand...
Click to collapse
I have done a hard reset. The icoons do work with 192dpi. But i prefer 96 dpi. I hope there is a solution
PAPPL said:
Small things:
-No automatic softreset after HR configuration. Is this normal, or is this aborted because of No SIM-Card screen (cancel)? Did HR with SIM Card and still no automatic Softreset like usual.
-Device popups (start menu) do have a small delay. Is this normal?
EDIT: No wktask problem
Click to expand...
Click to collapse
the no softreset is a new feature. i cooked in EVERYTHING.
the delay could be because its loading the new enlarged start menu. if u dont mind that then leave it. if u want the regular menu in settings ull have the turn off or in the config app.
PAPPL said:
Small things:
-No automatic softreset after HR configuration. Is this normal, or is this aborted because of No SIM-Card screen (cancel)? Did HR with SIM Card and still no automatic Softreset like usual.
-Device popups (start menu) do have a small delay. Is this normal?
EDIT: No wktask problem
Click to expand...
Click to collapse
The "No Reset" after customization is Normal for this release there is a reset after the carrier settings however.
Cheers
BR
First impression? amazing even if wifi isn't working and media player crashes it.
Made a hard reset immediately after, radio 1.50, x7500, 96dpi, xp pro sp2.
I'll come back if i have more issues.
Officially now, as activesync and bt8010 declare, i have an x7510
Thank you all girls and boys
guido oskam said:
I have done a hard reset. The icoons do work with 192dpi. But i prefer 96 dpi. I hope there is a solution
Click to expand...
Click to collapse
thats one of the issues with 6.1 and realvga. we need to get tobias to fix them unfortantly.
theobabis said:
First impression? amazing even if wifi isn't working and media player crashes it.
Made a hard reset immediately after, radio 1.50, x7500, 96dpi, xp pro sp2.
I'll come back if i have more issues.
Officially now, as activesync and bt8010 declare, i have an x7510
Thank you all girls and boys
Click to expand...
Click to collapse
i wonder what would happen if u turned off htc home before starting the media player. try that and report back. wifi cmonex must fix.
Pawel062 said:
i wonder what would happen if u turned off htc home before starting the media player. try that and report back. wifi cmonex must fix.
Click to expand...
Click to collapse
What would be best to do; sent cmonex a pm?
hellejoep said:
Great release but I found some bugs:
1.
When I hang up an incoming call on my bluetooth headset the customised ringtone is back to standard????
2.
When I hang up an incoming call on my bluetooth headset the volume is set to zero and I have to manually turn it back on....
3.
Wifi is not working with my current radio 1.57.00.
Cheers and any fixes are welcome,
HJ
All of the above problems are still here after a hard reset......any suggestions?
Click to expand...
Click to collapse
were you able to find a solution for problem 1 the issue with the ringtone being set back to default ? i am going through the same thing!
Skype
Under AP4 could not start Skype. Internet connection ok.
anyone with wifi issues
I want to ask you a few questions
- does the wifi totally refuse to turn on?
- if yes, then, when flashing AP4, did you have an interrupted flash? in this case, please describe me exactly when the interruption happened and how.
also, in this case contact me on IRC at http://java.freenode.net/ (channel name should be xda-devs, and pick a nickname as well). but a program will soon be available to make the fix easier and it can be published so I won't need to help personally.
- if it does turn on, then just check your wifi settings, you set up something wrong.
Issue: dealing with menus.
The issue is when I open a menu, by defult I should be able to press certain bottons on the keyboard in order to choose certain options. For example, when I attempt opening a video in TCPMP I would press file on the screen then press the letter "O" from the keyboard in order to access the option "Open".
It doesn't work in AP4.
Hardrested after the update.