I tried hardspl but had an error.Then after we tried to download a wm shadow 2 to the device and now it always start in bootloader mode.hard reset and again bootloader...
What we have to do?
tomdas said:
I tried hardspl but had an error.Then after we tried to download a wm shadow 2 to the device and now it always start in bootloader mode.hard reset and again bootloader...
What we have to do?
Click to expand...
Click to collapse
sorry~~~~~~~
That is NOT bootloader mode, only Fake Boot,
If you don't force to bootloader manually,
you will never end...........
sorry ~~~~~~~~
can you manually enter Bootloader? if not, this might work...
download an official wm5 rom
disable 'connect through usb' in activesync, but make sure it is running.
run the wm5 update utility, and hope...
tomdas said:
I tried hardspl but had an error.Then after we tried to download a wm shadow 2 to the device and now it always start in bootloader mode.hard reset and again bootloader...
What we have to do?
Click to expand...
Click to collapse
this is very simple
soft reset and press and hold camera button
and upgrade. enjoy it.
Related
Hi to all,
please help me,
When i wana install the last atom exec rom,two days ago,everythings is ok,but after hard reset,my device stayed at O2 logo and I couldn't hard reset my device and install rom too,because didn't sync with my laptop,have you any idea for this problem?
take off the battery and try again
I take off the battry many time,but this problem exist yet.
can you enter in bootloader mode (camera + reset) ?
yes,but i see a black screen that written on it:sd detected and
"starting download ...
sdDownload:couldn't find file;diskimg.nb0;.
sdDownload:couldn't find file;eboot.nb0,.
sdDownload:couldn't find file;dm.nb0,.
..."
at the end of screen:
"SD trensfer completed."
what your idea?what things i must to do?
Once entered in bootloader mode (ignore these SDCard messages), plug de USB cable and wait the device to be detected by windows
you'll be able to upgrade a new rom
i have the same problems, i upgrade the phone still stay on o2 logo
any other solution??
thanks
have you follow the upgrade procedure correctly?
just an opinion...
remove sd card...
then enter bootloader
then run upgrade DSUU.... follow on screen instruction
should be ok to upgrade your rom...
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button
4. replace battery while still holding the buttons
This will bring you back to bootloader mode. Just flash the above DSUU.
DUN USE MEMORY CARD TO FLASH AGAIN!!!
joncy said:
just an opinion...
remove sd card...
then enter bootloader
then run upgrade DSUU.... follow on screen instruction
should be ok to upgrade your rom...
Click to expand...
Click to collapse
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
mphoneclinic said:
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
Click to expand...
Click to collapse
what ROM version that you used?
think better for you to downgrade to ORIGINAL WM5 ROM. since ATOM EXEC used the MN2 bootloader you will not able to update you rom via bootloader mode. BUT I will share my experience on my ATOM EXEC when my device in unable to boot condition.
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
3. TAKE OUT SD CARD !!
4. take out your battery, press CAMERA+RESET and plug in back your battery, you should come back to bootloader mode again (now you should have MN1 bootloader on your ATOM EXEC)
5. Run Xda-Atom-Exec-ENG-20060721-MOT0822.exe, the ROM will be intalled on bootloader mode BUT will be stack 6% on EXTENDED ROM
6. when 6% (progress bar not move anymore) just take out your USB cable from your ATOM --> on this stage you already upgrade ROM + bootloader(MN2) just the EXT ROM failed to update
7. turn on your device, you will able to enter to WM5 but the job not finish yet.
8. run one more time Xda-Atom-Exec-ENG-20060721-MOT0822.exe on DSUU mode, viola after completed the progress your device will be back on ORIGINAL WM5.
note: please read step by step, if you don't understand than better DON'T DO IT, send to service center will be good choice otherwise your ATOM EXEC can really become paper weight!
chartreux said:
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
Click to expand...
Click to collapse
What can we do if the bootloader don't start ?
it is possible to modify eboot without bootloader ?
Thanks a lot.
bedav said:
What can we do if the bootloader don't start ?
it is possible to modify eboot without bootloader ?
Thanks a lot.
Click to expand...
Click to collapse
I don't think so, if your device can not be turn on via bootloader mode, then the bootloader corrupted on your device. the key is to secure the bootloader partition. without that one will be useless
Never did anything before. Never unlocked.
Downloaded the official exe file today, update was in the middle, but the phone was freezed. I reset then stuck in bootloader.
TITA100 MFG
SPL-2.03.1000
CPLD-9
Then, I format my micro-sd to fat32, put the renamed TITAIMG.nbh to sd, use "Hold Power and Camera + Reset" to get into tricolor bootloader.
But, I can only get into bootloader tricolor screen, nothing more. Please help me, what I can do to make it load the TITAIMG.nbh? Thanks!
I tried let it at bootloader, connect it to xp, re-run the update, then the update told me not the right update for this phone. Any help?
try to get into bootloader, connect usb and see if tri color screen says USB...
then run olipro 2.40 bootloader install...unlock ur rom, then when thats done run the official rom install again, but redownload it incase u got a corrupted file
read from dcd thread
Guys help me please, i'm using xda atom life wm5. i'm trying to upgarde my rom to wm6.
Once it's start,my computer restarted and in pda screen show dssu mode....
What should i do?help..thx
teddyiskandar said:
Guys help me please, i'm using xda atom life wm5. i'm trying to upgarde my rom to wm6.
Once it's start,my computer restarted and in pda screen show dssu mode....
What should i do?help..thx
Click to expand...
Click to collapse
It's still ok I think if the extended ROM was not yet flashed by the computer. Try connecting and flashing it again. If it still does not work then there is a thread in the ATOM forum.. Dead Bootloader. Please go through it.
teddyiskandar said:
Guys help me please, i'm using xda atom life wm5. i'm trying to upgarde my rom to wm6.
Once it's start,my computer restarted and in pda screen show dssu mode....
What should i do?help..thx
Click to expand...
Click to collapse
it hanppend to me last night, here's what i did:
1. i put on my 256MB mini SD a WM6.1 PDAVIET rom for atom life. then i inserted in on my atom life
2. i entered bootloader mode (press record button then reset button)
3. at this point, your device will detect the mini sd with the rom, it will automatically flash the rom. upon completing, your device will restart. HOWEVER, it will still prompt you to enter bootloader mode since the previous DSUU failed and corrupted your IPL, EXTROM, and RADIO.
4. I entered bootloader mode again. then select ENTER OS. that is no.1 on the choices in Bootloader mode.
5. your device will now continue booting to your rom (the one you flashed thru the miniSD).
6. you will notice that your device cannot perform its phone function since the RADIO is corrupted. but since you have successfully entered your OS, you can connect your device again to your computer thru the USB activesync.
7. now that your device is connected, run your WM6 DSUU again. it will flash the rom to your device, just pray that your computer wont restart again, otherwise, you will have to repeat the whole process. mine restarted for 2 times, luckily on the third boot up, i have flashed it correctly. the DSUU will flash the IPL, EXTROM and the Radio rom, all that are corrupted due to the upgrade failure.
anyone help out a newbie?
thanks.
-Ernest.
Put it in sync before you boot it
DhaMajoR said:
Put it in sync before you boot it
Click to expand...
Click to collapse
that does not work.
Im sorta new too... whats bootloadeR? thanks
Bootloader is the Tri color screen. Wait, let me refer and tell you how to enter bootloader in Hermes.
Regards,
Carty..
Carty said:
Bootloader is the Tri color screen. Wait, let me refer and tell you how to enter bootloader in Hermes.
Regards,
Carty..
Click to expand...
Click to collapse
Yes, I am in that screen.
red, green, blue.
The white section says USB.
Ok, you can access the Bootloader by pressing both the Power button and the Side Ok button together and while you have it pressed, make a soft-reset by inserting your stylus into that hole.
Regards,
Carty..
Exactly, from that screen, connect to Desktop PC and execute the ROM Update Utility to begin flashing of the ROM.
Regards,
Carty..
i'm trying to flash a ROM via ActiveSync, and my Phone won't sync with my computer when I am in BootLoader mode.
You can actually flash without entering Bootloader! Have you tried that?
Remember, when you're in Bootloader screen, the phone will not sync with ActiveSync but can still be flashed if the RUU is executed. Did you try?
Regards,
Carty..
i will try that.
will get back to you...
One more thing, you can exit Bootloader only by flashing a ROM I guess or through a hard-reset too. If you couldn't flash from your PC, try flashing from SD Card.
Regards,
Carty..
m00b3rt said:
i'm trying to flash a ROM via ActiveSync, and my Phone won't sync with my computer when I am in BootLoader mode.
Click to expand...
Click to collapse
You actually dont need to have it synchronized. Just connect, hear that found new hardware sound, directly execute the rom update utility and it will begin flashing.
so, for the HardSPL.
i just run the RUUwraper file, and it'll work out fine?
Yup! Try it out!
But I guess hard SPL requires you to be in normal mode rather than bootloader! If you want to execute bootloader, try flashing the rom that you are about to use after hard spl and that should probably stop in the middle saying Invalid ID or something and your phone may return to normal mode. Then flash hard spl.
Thanks for telling me what bootloader is, I went through that screen but i wasnt sure what it was. Thanks
Once in bootloader mode, you can't connect with activesync...
to get connected with activesync the phone must be in normal mode.
Ok, i have gotten the ActiveSync working.
But now, my new rom, the GOLDENGLOBE by Tai,
I am stuck on the Splash Screen.
(which is the first screen that comes up, in default power on)
help.
Thanks.
Hello.
I tried to update with the ROM from SD card, but it failed.
My phone doesn't boot after that - it hangs up showing just splashscreen and some info -
ONBL 1.07.0000
SPL 1.10.0lip
GSM 02.71.90
OS 1.8.0.0
Hard reset didn't help.
I tried to flash ROM through RUU (device still goes into bootloader by pressing camera+reset/power), but it said
ERROR [200]: Invlid Update Utility
Please get newer Update Utility
Is there any way to flash my device? =\
btw, sorry for my english, i know that it's quite bad )
You need to first patch your HSPL and then flash a custom ROM.kindly read the ROM Upgrading Guide properly in the GENE forum.you can also find the link in my signature.
karan999 said:
You need to first patch your HSPL and then flash a custom ROM.kindly read the ROM Upgrading Guide properly in the GENE forum.you can also find the link in my signature.
Click to expand...
Click to collapse
If you are talking about that method -
Step 5: Use the Orefkov Unlocker
------------------------------------
1. Remove the battery, SIM card and SD Card of your phone and press the Power key for 20 seconds to draw out any residual power from the phone.
2. Replace the battery but not the SIM and SD card, and don't start the phone yet. Press and hold the Camera button and then press the Power button or Soft Reset button. Phone will come to boot loader mode (tricolor screen) and SPL 1.10.Olip will be displayed.
3. Connect the USB cable. The text USB will appear on the bottom of the screen.
4. On PC, go to the folder Orefkov in the folder extracted in step 1 and run the Mtty1_42.exe. Press the button "USB" in the window that opened.
5. In the window that opened, type the following command (don't use copy paste please) and press enter:
Code:
set 32 1
You'll see a response from phone.
6. Type the following command BUT DON'T PRESS ENTER YET:
Code:
ls boot.bin
Note : that is small L and small s in that command, dont mistake it with I.
Now, hold down the Camera button on phone, and press the enter key on computer. After a while, the screen will become White. Continue pressing the Camera button for 10 more seconds.
7. Now release the camera button, close the MTTY program and run ROMUpdateUtility.exe in the same folder, not the one outside it. That one is for RAM flashing that we will use later. Check the boxes in each step and click Next Next and then at last Update. Let it finish the process. Your phone will restart.
8. Now on the splash screen you'll see the info with updated SPL version. The version of SPL will be 1.07.Oref.
Congrats! you have successfully patched your SPL.
Click to expand...
Click to collapse
then it didn't work.
Mtty connects to the phone, it even says that bootlader patched, enters the "White screen" but RUU that is situated in the "Orefkov" folder says still the same: ERROR [200]: Invalid Update Tool
And btw, Orefkov method is for new gene only, am i right?
And I have an old one. And it's already have 1.10.0lip SPL, that allows custom ROM flashing.
LordOfFrost said:
And btw, Orefkov method is for new gene only, am i right?
And I have an old one. And it's already have 1.10.0lip SPL, that allows custom ROM flashing.
Click to expand...
Click to collapse
ya..Your SPL is patched and u have old gene
Now u can Flash Any custom rom from here(just No stock roms)
Problem was solved by deliting Active Sync, cleaning registry with CCcleaner and installing Active Sync after that...
I think that there was some driver problem or smthng >_<