I have done a cab installer for Bluetooth SAP Profile, for people that use it!
Thkx a lot man. going to try it...
thnaks man
bikertibi said:
I have done a cab installer for Bluetooth SAP Profile, for people that use it!
Click to expand...
Click to collapse
I have tried to download the Bluetooth_SAP_profile.CAB but i get an error message saying that i do not have not logged in yet i actually am logged in ...i can however download the other bluetooth protocols you have posted. Kindly assist.
Good job Man.
@bikertibi: I´ve seen you have the XDA Neo also. I have this mobile too, with the OS WM 5.0. Does the program works with this OS?
Limbacher said:
@bikertibi: I´ve seen you have the XDA Neo also. I have this mobile too, with the OS WM 5.0. Does the program works with this OS?
Click to expand...
Click to collapse
I don't tested on WM 5.0 but I think it work.
Hi,
it works! Great,thank you for your help!
regards
Jürgen
Hi,
I will use ith with my Xperia X1 Sonyerricsson, but it doen't work.
Have you any idears? I must use it in my mercedes.
thanks.
hi
i have a scirocco and the radio ( RNS510 ) have the rSAP blutooh protocol .
do you know if this upgrade will make my htc p3600 work with the radio ???
thank you very mutch .
angelo from portugal .
babaroots said:
i have a scirocco and the radio ( RNS510 ) have the rSAP blutooh protocol .
do you know if this upgrade will make my htc p3600 work with the radio ???
thank you very mutch .
angelo from portugal .
Click to expand...
Click to collapse
I don't know angelo, but you can try and told as about your experience..
hi
hello .
VW in the manual says that only Nokias and 3 siemes work in that radio .
Well for all the people out ther that have a scirocco and dont want to change cell phone ...
HtC remote acess card works fine with the radio .
Thank you .
angelo canelas
Hi!
I needed this for my Omnia to work with VW Premium handsfree bluetooth kit. I have boiled Omnia with Manila ROM. WORKS PERFECTLY!!! After long last i got it! Many thxxxx!!!!!
Next thing: is it possible to modify it to work on Samsung SGH-U600, which is PC connectable via Samsung PC Studio? My wife'd like to connect as well...
Take care!
J.
Hello,
how can I install this tool on my blackberry? I cannot install a .zip file.
Hope that somebody can help.
Zweez
bikertibi said:
I don't know angelo, but you can try and told as about your experience..
Click to expand...
Click to collapse
Hi,
I too got a scirocco and I have just tried the .CAB and
it worked!!!!
but one small problem is that u can upload the phone book
i got an X1 and got a cooked ROM from this site (cant remember whose though but it was one with 3 options of cooked rooms ) and before the .cab it was not working and no it is...
if anybody can help regarding importing the phone book, i really appreate the help...
long live xda
Disable popup menus?
Ìs there a way to disable all that upcoming popups while connecting and disconneting through bluetooth?
OldFellow said:
Ìs there a way to disable all that upcoming popups while connecting and disconneting through bluetooth?
Click to expand...
Click to collapse
I don't know any easy way to disable this popups! Can be a solution to make a windows service for checking this popups and close it, but is a programming hard work, and of course you can loose some ram and speed from your device.
Related
I see WM2k5 1.60c at Buzzdev.net but I can't upgrade because I can't create ".nbf" file. Please help me
Hi, Can you post the link on buzznet as i can't find it??
cheers
Buzz removed the upload. He will post it later on :roll:
Victor
It see it is available on the site!
The dump of 1.60c on Buzz's site is only a dump of files from his device that were used for his testing...
The installer package will be released later on this week / early next week, please be patient...
it'll be worth the wait !
I confirmed it already reposted by buzz. You can download it now. I already upgrade it to 1.60cWWE, but I didn't see any different.
Quite a bit speedier, can't see much else different tho.
Thanks for your time and effort Buzz! We appreciate it.
Hi Buzz,
Thanks Wooooo Hooooo!!!
Everything works fine!!! The speed increase is wonderful!
I have no words to express my gratitude!! You are da man.
I think a lot of people have been spoilt and miss the big picture! Buzz you have done a great job. Just a small comparison to prove this:
Still Broken:
- The buttons (I would love for these to work, its no biggie)
- MMS (Which I have no need for realy)
Fixed huge problems by using WM2005 vs WM2003:
- Bluetooth works like a dream
- Headset reliably works
- Car kit reliably works
- BT GPS reliably works
- Persistant Memory!!!!
- No lockups
- Faster!!!!
- Battery lasts at least twice as long
- We now have WMP 10
- There are several other benefits that the os brings
Respect to the man with the plan.
Regards,
Duan
hi guys
i have dowloaded the update but how do u install it, and do rekkon it will fix the tomtom5 reseting problem
Cheers
Neel
HI all,
intalled 96c but now can't get the extra 32mb storage to appear, unhide then unlock then run Hima_DOC_Tool_1.0.exe, reboot when asked but this cause hard reset and i have no 32nb storage???
can't install voice command, says i have not go enough room?????
currently have
storage 30.53 and program 120.32
any ideas.???????
Also tomtom won't install. Installation just crashes right after agreeing to the licence AAAAHHH??????
I followed Buzz's instructions so can't see what i have done wrong???
Griffy wiffy- any chance you can tell me how u installed it as i dont understand the instructions that come with it
cheers
Neel
Hi Neel, not sure what you are asking. uninstalled what??
Hmmm... I can only see forum on Buzzdev. Where did main page go?
What about the STK (Sim Tool Kit)?
Is it working as well?
I've tried 1.60h.
I worked flawlessly.
However, I have to go back to WM2003SE coz I really need and use this STK feature everyday.
Can someone tell me where can I find the cure for STK to be used in WM5.0, please?
Thanks.
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
tukmol said:
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
Click to expand...
Click to collapse
try this :
http://twosx.net/ppc/WM2k5_1.60c.00WWE_XDA2_HIMALAYA.rar
:wink: :wink:
WM 2005 v1.60C !!
hi all,
after upgrade to wm 2k5 v. 1.60C
y i cant install program to 128mb storage ??
only can install to 31mb storage
thz for ur ansss
hi
after upgrading to 1.60c.00WWE, has anyone lost there Ram disk thing
im totally confused when it comes to Ramdisk, what on earth is it? does it make the memory available on WM5 more? more than the 60 mb we get for storage??
Sorry i know it's a stupid noob question but i really wanted to know
Cheers
Ash
Found here
http://forum.xda-developers.com/showthread.php?t=401679
anyone got this working on the touch dual? I've tried to install but get an error - NOT COMPATIBLE WITH YOUR PHONE. i'm running 6.1 on my dual!
Any help is much appriciated.
weird i get the same message
i have it working on my niki. there is a modified cab available which has been de-certified.
you must then patch the meta file for each map so the map is authorised for use on your handset! it only works with v7 maps!
its pretty quick, not much has changed. the type face is a little too big for qvga, but it works.
EDIT:
there is now a QVGA version, see link in post #7 in this thread.
Minty, can you link it, I can't see it in the other thread. Cheers.
Have a look HERE....
Maybe it could work.....
thanks flavio
im not sure if that is the modified one for QVGA screens, if not, try this one
http://www.megaupload.com/?d=MJRRV63O
(not my work, so dont credit me)
minty1978 said:
im not sure if that is the modified one for QVGA screens, if not, try this one
http://www.megaupload.com/?d=MJRRV63O
(not my work, so dont credit me)
Click to expand...
Click to collapse
This one works for me
ok guys i got tomtom working on my touch dual, however cant download any maps. I installed tomtom7 on my tytn ii and managed to download the free map - it is currently working ok on the tytn. when i port this map over to the touch dual, i get an error saying that the map is not compatible?
winwiz said:
ok guys i got tomtom working on my touch dual, however cant download any maps. I installed tomtom7 on my tytn ii and managed to download the free map - it is currently working ok on the tytn. when i port this map over to the touch dual, i get an error saying that the map is not compatible?
Click to expand...
Click to collapse
You need version 7 maps, available at all good online outlets ;-) and you need to run a keygen on them to make them work with your device. I have tomtom 7 working from a straight install cab on my Niki and my Artemis, and UK map 7.20 (latest one, google for it! Or PM me, I suppose) which then needs a different keygen running on it for each device you're going to install it on, ie the activation key for the map is tied to your device, which is why you can't copy the map over from one device to another.
official purchased maps do not require a 'keygen'.
i tried to install the TomTom_Navigator_7.450.9028_repack2.cab but the setup doesn't start... i come to the questio where i want to install it but then it stops without error
Hi guys, I installed the new tomtom 7 on my dual and when I try to start the APP appair a windows that say unable to start. not enough memory is avaiable. What's the problem? I think to have a good level of free memory.... sorry for my english and thanks
fyase said:
Hi guys, I installed the new tomtom 7 on my dual and when I try to start the APP appair a windows that say unable to start. not enough memory is avaiable. What's the problem? I think to have a good level of free memory.... sorry for my english and thanks
Click to expand...
Click to collapse
which version did you install?? this one TomTom_Navigator_7.450.9028_repack2.cab ??
gatto79 said:
which version did you install?? this one TomTom_Navigator_7.450.9028_repack2.cab ??
Click to expand...
Click to collapse
yes I installed this one
it worked fine on mine, try running it after a soft reset...or makesure all your programs are closed before running it.
what ROM are you running? mine is a HTC standard one from AUS.
as for not installing..not too sure, try the above also.
I also try to install and start the app after a Hard reset but nothing.... I have always the same error... my ROM is the original TIM italy
minty1978 said:
it worked fine on mine, try running it after a soft reset...or makesure all your programs are closed before running it.
what ROM are you running? mine is a HTC standard one from AUS.
as for not installing..not too sure, try the above also.
Click to expand...
Click to collapse
i have installed this RUU_Nike_HTC_DE_1.31.407.09_Ship
it does run no problem on my dual i have black repack3, v7 maps and it works great. you must have done something wrong some were. Try it again etc
.............
Guys,
I have used a Himalaya for 3 years and a Prophet for 2 years and I have been from wm2003 till the latest wm6.1 version with touchflo 2d, but I gave my prophet to my son and now I am using a qtek8500 (aka startrek). I have 2 questions:
1) What is the difference between the standard and the pro version on this device?
2) I flashed Erofich's pro V2 version (congratulations!) which looks very nice, but I can't synchronize with my Vista laptop. Can anyone give me advice and please don't tell me to switch to a XP pc as I don't have a XP PC.
Thank you very much for your help!
Difference
The Standard ROM is optimized for smartphone controls, whereas the Professional ROM is made for touchscreen devices. If you use the Professional version on this phone, you have to use a dummy cursor with the D-pad.
eddyve said:
Guys,
2) I flashed Erofich's pro V2 version (congratulations!) which looks very nice, but I can't synchronize with my Vista laptop. Can anyone give me advice and please don't tell me to switch to a XP pc as I don't have a XP PC.
Thank you very much for your help!
Click to expand...
Click to collapse
Hi freind
you can see this guid .
Thank you for this answer. I know this trick for a long time, although it doesn't work. Did you try it yourself? For example if your device is not connected, you will not see a mobile device in the device manager!
thx anyway
eddyve said:
Thank you for this answer. I know this trick for a long time, although it doesn't work. Did you try it yourself? For example if your device is not connected, you will not see a mobile device in the device manager!
thx anyway
Click to expand...
Click to collapse
No , I use from XP
but a question : do you use from this application ?
& finally , maybe this post can help to you .
knox203 said:
VitaPSG,
You would be more likely to get help by starting a new post, rather than piggy-backing someone else's post.
Just a tip!
- Adam
Click to expand...
Click to collapse
Here it is !
(I'm french and I live in Paris, please forgive me for my bad english !)
Hello everyone !
I'm a new user of the HTC Touch Pro.
I've successfully cidunlocked my phone. (When I'm going into the bootloader, i can read "1.90 olinex")
I'm currently using this rom : "|RAPH|6.5|ROM|WWE| ★ EnergyROM 3.0 'Phoenix' (21812) ★ || Build date 2009/6/12 ||"
I'm also using "Raphael Radio 1.14.25.35"
I've got several problems with my phone :
First of all, I'd to change the hardware keyboard in order to put it in french :
Rottis said:
FOUND IT!!
I tested this myself on an swedish raphael, and it works perfectly!
1. Install a Registry Editor program if you already don't have one. I use PHM Registry Editor found here: http://pocketland.de/util/getdownload.php?regedit.Mrln_ARM.cab&id=22357
2. Go to HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD
3. Search for Curlang
4. Change the value of Curlang to 1044 (means Norwegian-bokmål)
5. Soft-Reset
6. Enjoy!
Hope this helps you guys out there to finally install those cooked roms without keyboard issues
I almost gave hopes on this one, after many many hours of googling and testing it worked, how relieved i am now!
Click to expand...
Click to collapse
I've tried : i've changed the value of Curlang to 1036 in order to put my keyboard in french but nothing has changed !
Please help me !
Black C5 said:
You may find some help on this thread...
http://forum.xda-developers.com/showthread.php?t=425045
Click to expand...
Click to collapse
I've tried this way but with no results ...
Help please !
Hattori_Hanso said:
Hello everyone
The rom turned out very well, only that trouble of mine with him, how it does not distribute the level of a battery properly. I see the good level after a reset always only. This is enough serious error because of that. Please help me.
Click to expand...
Click to collapse
We've got the same problem here ...
I'm also forced to do a phone's soft reset when i'm connecting it to my laptop (usb connection) or when i'm charging my battery's phone !
I was also wondering if you'd be king enough to indicate me a substitute for WMP, that could read videos with an "avi extension" (.avi) ?
(I've tried a cracked version of the "Pocket Player" but it wasn't functionning well on my phone ; actually it was crap ...)
Hope you'll understand what i'm trying to tell you all !
And again i'm apologizing for my bad english !
Best regards,
Thanks !
Anyone, please ?
VitaPSG said:
Anyone, please ?
Click to expand...
Click to collapse
not really sure what the issue(s) are but I think you need a FRENCH ROM.
The thing is i'd like to stay with the energy rom because it's a great rom ... but i'd also like to have a french keyboard ...
I really don't want to put a french rom on my phone, because i think there is no french rom which is as great as the energy rom.
I have another issue with my phone : sometimes when i've just end the connection with my laptop i get this message : ""nameoftheapplication".exe is not a vaild pocket PC application"
Whan can i do about it ?
Can anyone help me with a link, I want to download TomTom 7, preferably the latest version. I need this apps for my HTC HD2 Dutch version.
I already did download one version in the past , but this version does use Bluetooth only. I need a version that allowes the Phone speaker to work
use this magical link :
magical link
Dear Corwin9,
Thank you for your reply.
I already could figure out that I could find this on the Google pages.
The point is that I can Not be sure that I have the correct program (.Cab), I already did destroy 1 HD2 installation of Windows Mobile 6.5.
Furthermore, I could Not find any download in which the specs are telling me if it is a Bleutooth version or Not.
I was hoping for a direct link which leads me to the correct program, this instead of taking any risks again.
Thanks again,
Regards
Eric
well...
I can't understand how you can brick a phone installing TomTom. As nothing is putted in registry or in windows folder...
This means that after each of my hardreset, I can launch tomtom without reinstalling it.
By the way, not all version of tomtom are supporting the bluetooth. As far as I know :
version 7.917.9186 has two choices, with or without bluetooth handling.
version 7.918.9193 supports bluetooth
so, try a search with those versions.
And sorry, I will not post direct links, because TomTom leads several checks on several forums to track down such links.
Hi Corwin,
Thanks a lot, Searching on the release number will help me to determine that I have the correct version.
The Version with Bleutooth did overwrite the "BTtrayCE" in the Windows directory, this did cause Bleutooth to stop working.
Thats why I do Not want to take the risks of getting any other surprises from Tom Tom
Wise precaution not to post direct links, I agree with you you.
Regards,
Eric
Hi Corwin,
I downloaded version 7.917.9186, but this does not seem to be a compatible program for my HTC HD2.
Do you have any suggestions ??
Thanks,
Eric
well... it depends on what message error you have !
pliz note that you will need maps to be able to use tt !
Hi Corwin
The HTC HD2 gives a reply "this program is Not compatible with your device" (in my case in Dutch). When replying with an "OK" than it stops installing
Regards,
Eric
so take a version for windows mobile... not for smartphone.
tested on winmo 6.1 and 6.5 and it's ok...
The 7.918.9193 vga black works very well with HD2
Hi Corwin,
Sorry for asking again your help !
I have now a working TT 7.9 installation, but installing the Maps is apparantly different than the older versions.
I do Not know which map is compatible with the ttn7.917.9186_qvga Version. (I could not find a WVGA version). At present TT replies at start up with the message that it can Not find the maps. As I did before, I did hack the "Meta" file, so I would expect it to work !
Regards,
Eric
Hi JSB,
I did install ttn7.917.9186_qvga_blue, it seems to work fine now on the HD2.
But the next step installing the Maps is an other story.
The problem starts with : which map is compatable ?? (Western and central Europe)
And How to activate the Maps ?
Do you have any usefull suggestions ??
Thanks,
Eric
I have version 7.918.9193 vga black with map western and central europe 2GB 860.3128 and it works just fine.
To activate the map it is another issue that I believe I cannot discuss here, if you know what I mean.
Hi JSB,
Thanks for your reply !!
I understand what you mean
Is activation the same story as "7.450 (9028)" with the maps "720.1803" ?
The Meta file story ??
I just hope I do Not ask to much Now !!
Regards,
Eric
Please check your PM
dankjewel hoor
Hi JSB,
May be call me stupid, but what do you mean by : "Please check your PM"
Regards,
Eric
look there, works flawlessly on my hd2
http://forum.xda-developers.com/showthread.php?t=647096&highlight=tomtom