Related
continue of this thread.
Did you rename the file and to what? Do you use it with any of the VOX_USPL zip files I posted? Have you taken out your memory card? Have you made sure you don't autostart programs? Have you tried the VOX_USPL which works on Vox (uspl_jockyw.bat), of course rename the file accordingly?
Click to expand...
Click to collapse
I used your last version of VOX_USPL.zip (671kb)
Now, made a full app/registry unlock, renamed my splitted spl to SPL116.nb, removed a MicroSD card, launched a uspl_116_jockyw.bat, and followed instructions - pinguin->white screen->reboot (and turn off in certain cases)
The device is undiscoverable for Windows PC (mtty and ruu aren't discover an usb port/device)
btw, i also tried an early version of VOX_SPL (721 kb) too
Have you made sure you don't autostart programs?
Click to expand...
Click to collapse
Hm? I have a SmartFilter, ClockOnTop, BatteryGauge, and xBar in autostart
ps. but also tried with a clean device (after hard reset and app unlocked)
pps. Can you explain why we must take out a memory card?
Try the later version of the VOX USPL (671Kb):
http://forum.xda-developers.com/attachment.php?attachmentid=47865&d=1187847514
Run uspl_116_jockyw.bat and no need for pressing any buttons on your device. Run it with the original Vox files and also try it with the stripped StarTrek SPL and rename it to USPL116.nb
You should boot your device w/o SD card and w/o starting up any programs. Just run uspl_116_jockyw.bat when your device is fully booted. This is to ensure that WM can not pollute the memory at 0x8c000000
Where can I find some fact sheet on the StartTrek?
jockyw2001 said:
Try the later version of the VOX USPL (671Kb):
http://forum.xda-developers.com/attachment.php?attachmentid=47865&d=1187847514
Click to expand...
Click to collapse
I tried it too
jockyw2001 said:
Run uspl_116_jockyw.bat and no need for pressing any buttons on your device. Run it with the original Vox files
Click to expand...
Click to collapse
Tried - pinguin, hangs up at pinguin screen, and after ~5 seconds device turns off
jockyw2001 said:
and also try it with the stripped StarTrek SPL and rename it to USPL116.nb
Click to expand...
Click to collapse
pinguin->white screen->reboot
jockyw2001 said:
Where can I find some fact sheet on the StartTrek?
Click to expand...
Click to collapse
I don't know.. =\
Well, then I'm afraid you're on your own.
Good luck!
PS: I did find a factsheet on the US HTC site. It has the same CPU as the VOX (TI OMAP 850)
there is a working softspl for startrek
http://4pda.ru/forum/uploads/img-65469-star.rar
all thanks to Alex[DFR] aka sp3dev
That's excellent news! Thanks for the update Erofich!
Dear members
I was really very desperate to try my hands on ROM upgrading since I got my Atom life. But inspite of all ROM being available here I am not able to upgrade my ROM because it has to be done through mini-sd. I don't know whats going wrong but here are the issues I have faced:
1.I am not able to get the Record+Reset working on my Atom life.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct?
3.Can there be any alternative way to get this device upgraded like we use to do in HTC devices.
I wish to know from all the users if they are having answers for these questions.
This is a must have for a thread for Atom, but couldn't find any dedicated solution to this procedure of upgrade.
Hope to get some solution soon.
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------
What you see above were the most expected questions of a newbie to ROM upgrading in O2 Atom Life[O2 comet]
Here is the most simple guide in upgrading the device. This is based on my personal experience so any deviation ca be expected in case you do it yourself. But most of the steps are just ubiquitous in case of any attempt at upgrading the ROM in Atom Life[O2 comet]
--------------------------------------------------------------------------------------------
INSTRUCTIONS:
Formatting card & setting the file type to fat16 or fat on your PC or with the help of any pocket pc application.
Then you need to copy the file[xxx.DIO] on your memory card[not in any folder] Just reset the device pressing record[in right middle side] along with stylus in the softreset hole[in the left botton side]
Take Stylus out first & then keep pressing the record button until black screen with minisd detect appears.
Thats it. Now it will start installing the ROM from the memory card.
Things to remember:
1.get 1gb or less card[2gb won't do at times]
2.Format it in windows or in your ppc in either fat or fat16 format[don't do fat 32 it won't work]
3.Copy the file on the memory card[not to any folder in it]
Hope the guide will help you & you will have no problems in updating the phone reply if there is any problem.
Regards
Saksham Katyal
W/O RUU for Atom life it is a hard nut to upgrade ROM in Atom life. I hope develpors may have some answer for this.
sakshamkatyal said:
Dear members
I was really very desperate to try my hands on ROM upgrading since I got my Atom life. But inspite of all ROM being available here I am not able to upgrade my ROM because it has to be done through mini-sd. I don't know whats going wrong but here are the issues I have faced:
1.I am not able to get the Record+Reset working on my Atom life.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct?
3.Can there be any alternative way to get this device upgraded like we use to do in HTC devices.
I wish to know from all the users if they are having answers for these questions.
This is a must have for a thread for Atom, but couldn't find any dedicated solution to this procedure of upgrade.
Hope to get some solution soon.
Click to expand...
Click to collapse
Hi guy, can only adv you the pt(1) + (2)...
1.I am not able to get the Record+Reset working on my Atom life: You must Press Record + Reset, leave Reset first.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct: Yes, I always use 2G SD to up ROM (make sure there's no any file in SD excepted AL1.DIO)
Good luck!
I didn't get you my friend. plz be more clearer.
1. Press Record + Reset, then leave Reset first but still keep pressing Record. AL will be in Bootloader mode for yr up ROM by SD.
2. For up ROM by SD, I always use 2G SD to up ROM (make sure there's no any file in SD excepted AL1.DIO).
3. AL can support 4G SD w/o no any problem, not yet test for 8G SD.
bravedoan said:
1. Press Record + Reset, then leave Reset first but still keep pressing Record. AL will be in Bootloader mode for yr up ROM by SD.
2. For up ROM by SD, I always use 2G SD to up ROM (make sure there's no any file in SD excepted AL1.DIO).
3. AL can support 4G SD w/o no any problem, not yet test for 8G SD.
Click to expand...
Click to collapse
have u tried flashing using a 4G card?
2G cards never worked for me. I use a 512M card for flashing. Without RUU u can't flash a custom ROM.
but maniac i have seen you claiming that 2gb card does work. thats whar made me confused.thanx allover..anybody tried 8gb on life with minisd adaptor.
sakshamkatyal said:
but maniac i have seen you claiming that 2gb card does work. thats whar made me confused.thanx allover..anybody tried 8gb on life with minisd adaptor.
Click to expand...
Click to collapse
naah. i dont think I have ever mentioned that before. If I have, then its by mistake. My bad then.
@Maniac, Don't bother brother. May be it could have been because of some mistake or may be in some other context.
Anybody tried 8gb microsd with minisd adaptor. Actually I wish to post results myself but the problem is that its not available in my city so have to order from ebay so a bit reluctant if it doesn't work.
Thanks & Regards
Saksham Katyal
My suggestion. Keep a smaller mini SD for flashing and a higher capacity card for other purposes. From my personal experience of using a 4GB card. Read is quite slow at times. It could also give issues while booting if you install applications on memory card.
I think I have no other option but to buy one. Hope it won't turned out to be a bad deal.
@maniac, bro why you have this slow reading problem when I don't imagine this can be there in such a high model PPC.
Moreover let me confirm everybody once again that the 2gb minisd won't work for ROM upgradation but 1gb does work like charm so try it w/o any doubts. It is confirmed as I have experimented with few of the phones.
I don't know if this may help you:
http://forum.xda-developers.com/showthread.php?t=401336&page=1
http://forum.xda-developers.com/showthread.php?t=401336&page=2
sakshamkatyal said:
I think I have no other option but to buy one. Hope it won't turned out to be a bad deal.
@maniac, bro why you have this slow reading problem when I don't imagine this can be there in such a high model PPC.
Moreover let me confirm everybody once again that the 2gb minisd won't work for ROM upgradation but 1gb does work like charm so try it w/o any doubts. It is confirmed as I have experimented with few of the phones.
Click to expand...
Click to collapse
Speed of the processor has got nothing to do with the SD card reading speed. It all depends on the card driver. My 4 GB is a pain at times.
maniac2403 said:
have u tried flashing using a 4G card?
2G cards never worked for me. I use a 512M card for flashing. Without RUU u can't flash a custom ROM.
Click to expand...
Click to collapse
2G is working for me. Never test 4G to flash ROM.
Really bravedoan? Thats a surprise I must say for me atleast as it didn't work for me. Anyway thanx for your reply. Any idea of 8GB working on Life?
sakshamkatyal said:
Dear members
I was really very desperate to try my hands on ROM upgrading since I got my Atom life. But inspite of all ROM being available here I am not able to upgrade my ROM because it has to be done through mini-sd. I don't know whats going wrong but here are the issues I have faced:
1.I am not able to get the Record+Reset working on my Atom life.
2.I have found somewhere in this forum that 2gb minisd does work. is this correct?
3.Can there be any alternative way to get this device upgraded like we use to do in HTC devices.
I wish to know from all the users if they are having answers for these questions.
This is a must have for a thread for Atom, but couldn't find any dedicated solution to this procedure of upgrade.
Hope to get some solution soon.
Click to expand...
Click to collapse
Can you help please?. My rw6815 after upgrading to wm6.1 of Biohazard cable / pc is total block. Before I left the blue screen of Biohazard. Today, after many restarts I managed to bring up the black screen with writing "Device clean boot ...... reset to factory default !!"""". I attacked the usb to PC for power and possible connections to the PC . But an hour has not changed and the computer screen does not acknowledge it. What do I do ????? Greetings Raphael. Translated from Italian by Google.
Oh Poor dib,
Mate this handset seems to me is identical to O2 Atom phone. So its better if you just check out a similar thread catering to Atom users. Try Wiki if it can help. We are users of Atom life which is not the phone which you are asking about. I could have helped you had it been an HTC phone which I used for long time. But this is my first O2 phone so can't help much. Hope someone knows about this problem comes out with its solution. Good luck brother.
Regards
Saksham
dib0231 said:
Can you help please?. My rw6815 after upgrading to wm6.1 of Biohazard cable / pc is total block. Before I left the blue screen of Biohazard. Today, after many restarts I managed to bring up the black screen with writing "Device clean boot ...... reset to factory default !!"""". I attacked the usb to PC for power and possible connections to the PC . But an hour has not changed and the computer screen does not acknowledge it. What do I do ????? Greetings Raphael. Translated from Italian by Google.
Click to expand...
Click to collapse
Just out of curiosity, do you have an external storage card inserted?
I inserted a 1gb miniSD from FAT32.
I think you have not followed the instructions carefully. Follow the instructions by formatting card & setting the file type to fat16 or fat on your PC or with the help of any pocket pc application. Then you need to copy the file[xxx.DIO] on your memory card[not in any folder] Just reset the device pressing record[in right middle side] along with stylus in the softreset hole[in the left botton side]
Take Stylus out first & then keep pressing the record button until black screen with minisd detect appears.
Thats it. Now it will start installing the ROM from the memory card.
Things to remember:
1.get 1gb or less card[2gb won't do at times]
2.Format it in windows or in your ppc in either fat or fat16 format[don't do fat 32 it won't work]
3.Copy the file on the memory card[not to any folder in it]
Hope the guide will help you & you will have no problems in updating the phone reply if there is any problem.
Regards
Saksham Katyal
I purchased a Taiwanese Iolite (T4242), comes with Chinese version.
I used the QMAT to Change the CID to SperCID and than Just flashed it with :
_file_RUU_Iolite_HTC_Europe_1.09.401.3_Radio_Sign_12.41.30.16_0.41.30.12_Ship.exe
IT WORKS FLOWSLY... and my device is now WWE.
How to do it:
I just followed the instructions on the http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard&action=BackLinks:
• Download QMAT and MTTY from http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
o The latest copy of QMAT is also found http://revskills.de/pages/download.html
• A spare microSD card
• Optional: a card reader
Format your memory card for FAT32
• If you have a card reader, go to DOS and type:
format <volume> /FS:FAT32 /A:4096
where <volume> specifies the drive letter of the SD card. For example: format d: /FS:FAT32 /A:4096
Run QMAT to create the Gold Card
1. Put the newly-formatted SD card in the working WM device and connect to ActiveSync
2. Run QMAT, go to the Hardware Forensics menu, and then select "Generate HTC Goldcard"
3. Select your device's key (Iolite)
4. Get the SD Card Serial from WINCE Device
5. Save the Gold Card image to the SD Card
6. Put the SD card in your device and put it into bootloader mode (hold down the VolumeDown button and press the reset button).
7. Now you have a card which gives you SuperCID.
8. With the card inserted into the Iolite, which is in bootloader mode, connect the Iolite via USB to ActiveSync.
9. From your PC, run the RomUpdateUtility.exe from the RUU folder containing the WWE shipped ROM
It should start flashing if everything is configured properly!
Good Luck
Thank you for your info but the steps are hard to follow, admire your patience!
I flashed mine without making a GoldCard to unlock my Iolite. Mine was in CHS and after flashing become Europe WWE. I am looking for an Asia WWE. There is one in the forum but it can't be flash and I don't know whether it is because it is RUU .... _Test.exe and not ... _Ship.exe
Maybe the GoldCard unlock method will work and not sure it is worthwhile to try.
In fact it is very easy.... if you read it carefully you see that it is just connect your device with a formated sd and than reboot it to boot loader...
The next is flash with any ship rom.
Seems that your country id matched the rom you flashed.. however you will not be able to flash any-rom.
As it seems to me many users are stucked with rom flashing .. Hard SPL has not been around yet.. so this is a nice solution and once again - very easy!!!
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
You have to purchase a license.
domestik said:
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
Click to expand...
Click to collapse
Yes you are right. I did purchase a license. Trojan??? please explain.
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
MTTY check-up
domestik said:
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
Click to expand...
Click to collapse
Mmm.... in fact, I did copy the entire directions of "Howto", however I did not even use the MTTY.. pay attention that in my notes, I ignored checking of SuperId setup. The Mtty is required just to check that you have a superid before flashing. It is not required (I think so...) with this machine... it wull not flash if the SuperId did not load.... so just to make it simple : connect the machine, setup the SD card and flash ..... easy no?
I will not load the MTTY from Rapidshare I trust that you checked it and since it is not required... I suggest that you eliminate this step.
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Need to use the written SD each time...
koalaii said:
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Click to expand...
Click to collapse
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
borce_razor said:
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
Click to expand...
Click to collapse
Yes. Success with Jade, HD and Iolite WWE to RUS
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Where supercid down!!!!! Buildor, making a link! Thank you!
Galaida, can you try to explain what have you done and what did not work for you? perhaps we can help to resolve the issue?
Should work.... please include in your answer the name of the rom you tried to flash and error messages that you received while in process of the Gold Card.
Link to QMAT
LITANG said:
Where supercid down!!!!! Buildor, making a link! Thank you!
Click to expand...
Click to collapse
I am not sure if this was requested... however here is the link to the "home" of the utility:http://revskills.de/pages/download.html
I suggest thta you get it from this site, as other users already reported RapidShare and other may have a Trojan as well.
QMAT
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Galaida said:
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Click to expand...
Click to collapse
try typing "boot"
avocaz said:
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Click to expand...
Click to collapse
Can anyone offer me some insight please?
avocaz said:
Can anyone offer me some insight please?
Click to expand...
Click to collapse
I can help, PM me
Unregistered QMAT cannot create GoldCard for Iolite.
Dubi said:
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
Click to expand...
Click to collapse
Dubi, wait a minute, do you have a registered QMAT or an unregistered version?
As one of the forum member commented, it will take 20 Euros, (more than $30) to register QMAT in order to make a GoldCard with the method you mentioned.
Can you confirm that?
Regards,
Dear Cmonex,
can you help please the Mega users with the procedure used for Leo (Goldcard) to change from an official Rom to another ?
Thanks
I try, but:
1) Not find key in registry with "2"
2) If i try to flash - have error "0028002 not allow"
Thankyou
Slimper said:
I try, but:
1) Not find key in registry with "2"
2) If i try to flash - have error "0028002 not allow"
Thankyou
Click to expand...
Click to collapse
you must buy QMAT and then make HTC GOLD CARD
Oszi said:
you must buy QMAT and then make HTC GOLD CARD
Click to expand...
Click to collapse
hi, Oszi, even I created gold card success, I still got the 294 problem. Could you help me?
007123456 said:
hi, Oszi, even I created gold card success, I still got the 294 problem. Could you help me?
Click to expand...
Click to collapse
have you a registered version QMAT???
If yes :
format the MicroSD card if FAT32
if you run vista or win7 ,then you must run the QMAT in admin
run in ppc itsutil ,ask for the ppc
now can you make it the gold card
Oszi said:
you must buy QMAT and then make HTC GOLD CARD
Click to expand...
Click to collapse
You can also download one from the "demo" version.
Version 4.24 (Legal, not cracked or something) were is option to creating goldcards you can download from atachments in this post: http://pdaclub.pl/forum/index.php?topic=142183.msg1063217#msg1063217
have a good day
Remember, this is 10 minutes demo - so hurry up with creating goldcard
Oszi said:
have you a registered version QMAT???
If yes :
format the MicroSD card if FAT32
if you run vista or win7 ,then you must run the QMAT in admin
run in ppc itsutil ,ask for the ppc
now can you make it the gold card
Click to expand...
Click to collapse
I have made the gold card successfully, but when I update the rom, I still can not pass the CID problem. Is there any people tell me how to flash the rom? Thanks a lot
in qmat 4.24 no Mega option in drop-down, what device need to select? Elfin or somethink other?
hi there i have created 2 videos part 1 and part 2 of the wp7 flashing guide. sorry but i have realised my webcam i recorded with has flipped the video left from right so you cant read what i am doing but you can see what i am doing. also i will wright up a step by step guide on how to do this so you have a video and some wrighting
PART 1
http://www.youtube.com/watch?v=HR1JLoyNgqg
PART 2
http://www.youtube.com/watch?v=NiZoN8K7M8k
MAKE SURE YOU A 100% CHARGED UP AND MAKE SURE YOU HAVE A COFFEE WITH YOU FOR THE FLASHING PROCESS
LIKE I SAY THERE WILL BE A DETAILED STEP BY STEP INSTRUCTIONS TO GO WITH THE VIDEO ALONG WITH THE FILES TO DOWNLOAD ETC
step 1
with a turned off tg01 and the nokser wm6.5.x rom on your tg01 press and hold the camera and power buttons to show a white LED and a black screen
step 2
Plug into usb and start up tg downloader. make sure your tg01 shows up in the port section, then click browse
locate the file wp7boot.bin then select open.
Click download mode and dont worry if tg downloader crashes if you see my video it happens to me. just keep closing and re trying tg downloader until when you
click download mode it says 100%
step 3
tg downloader may have crashed again just like in my video so again restart it and then click start download when it has finnished it may pop up an error just ok it and
disconnect tgo1 from usb and remove battery for a second. connect battery and hold power and camera buttons until there is a blue led and black/no screen
step 4
Reconnect your tg01 to usb and open the folder base_source_bootloader. Iside there will be a program tsunagi_ffu, right click this and run as administrator and wait for it to load
step 5
follow the onscreen prompts and wait for this to flash it may take a while as you can tell from my video part 2
step 6
when all is done it will say success or something, then it should start to boot wp7 when you get to the screen where there is a circle windows logo with white wrighting
just disconnect your usb so it doesnt interfeer with anything.
and there you go enjoy !!!!
jonnyhall1bmx1 said:
hi there i have created 2 videos part 1 and part 2 of the wp7 flashing guide. sorry but i have realised my webcam i recorded with has flipped the video left from right
Click to expand...
Click to collapse
I just watched your part 1 and it is bizarre trying to follow along the mirrored video. I look forward to your pdf when you post it...hope it's not backwards as well!
Cheers!
UPDATE - I downloaded part 1 video from Youtube, opened it in VLC player and was able to flip it horizontally. It's still hard to read because of the low resolution.
yes i am sorry my webcam mirrored the video haha i will have a pdf file up today with detailed instructions so you can read the instructions while watchin the video
i have successfully flashed my tg01 to wp7 and back again to wm6.5, 7 times altogether now i use my own method in the video and i find its 95% safer than any other method i have tried
Instructions are up just need to upload all the files
Btw did you get any method to revive the SD card after installing wp7?
aeroflyluby said:
Btw did you get any method to revive the SD card after installing wp7?
Click to expand...
Click to collapse
sorry i dont understand what you mean
can you explain more thank you
jonnyhall1bmx1 said:
sorry i dont understand what you mean
can you explain more thank you
Click to expand...
Click to collapse
If you install WP7 with SD card in, your card will get formatted and will be unusable at all, you would use it only in your wp7 phone and nowhere else, any other phone, card readers etc don't even see it.
It's possible to reformat the card with Nokia symbian or MAGLDR but we don't have both (some have nokia but not all)
aeroflyluby said:
If you install WP7 with SD card in, your card will get formatted and will be unusable at all, you would use it only in your wp7 phone and nowhere else, any other phone, card readers etc don't even see it.
It's possible to reformat the card with Nokia symbian or MAGLDR but we don't have both (some have nokia but not all)
Click to expand...
Click to collapse
yes i understand what you mean now yeah when i flashed back to wm6.5.x my sd card woudnt show up on my pc or in the phone /
aeroflyluby said:
If you install WP7 with SD card in, your card will get formatted and will be unusable at all, you would use it only in your wp7 phone and nowhere else, any other phone, card readers etc don't even see it.
Click to expand...
Click to collapse
Is it because WP7 uses a new proprietary format? Why can't it be formatted back to FAT32? I R confused!
CrashMurdock said:
Is it because WP7 uses a new proprietary format? Why can't it be formatted back to FAT32? I R confused!
Click to expand...
Click to collapse
Because WP7 locks the card to work only with your phone. SD means Secure Digital and it's DRM feature, theoretically unavoidable but symbian can reformat it.
aeroflyluby said:
Because WP7 locks the card to work only with your phone. SD means Secure Digital and it's DRM feature, theoretically unavoidable but symbian can reformat it.
Click to expand...
Click to collapse
Thanks for the great explanation. I guess I'm still amazed that formatting won't work unless via symbian. This seems to be a case where M$ really didn't think things through by removing the main reason people use swappable memory cards in the first place. I think many WP7 users are going to be screaming bloody murder when they find that their 32 or 64 GB cards have become micro paper weights!
CrashMurdock said:
Thanks for the great explanation. I guess I'm still amazed that formatting won't work unless via symbian. This seems to be a case where M$ really didn't think things through by removing the main reason people use swappable memory cards in the first place. I think many WP7 users are going to be screaming bloody murder when they find that their 32 or 64 GB cards have become micro paper weights!
Click to expand...
Click to collapse
M$ firstly stayed that WP7 won't even support SD Cards or any extensionable memory stuff because thet wanted to keep storage integral, for sure for stability. BUT people or some manufactures like HTC wanted to have in offer phones "that supports SD Card extension!! OMG I LIKE IT" and M$ worked day and night to bring it to us But it's worse than having no sd card at all...
aeroflyluby said:
M$ firstly stayed that WP7 won't even support SD Cards or any extensionable memory stuff because thet wanted to keep storage integral, for sure for stability. BUT people or some manufactures like HTC wanted to have in offer phones "that supports SD Card extension!! OMG I LIKE IT" and M$ worked day and night to bring it to us But it's worse than having no sd card at all...
Click to expand...
Click to collapse
Hmmm...with this development it seems that M$ must believe the cloud is the only way to go for storage. It's not a great idea as so many people don't have high speed Internet access, especially via cell towers. I am in northeast Thailand and we only have Edge cell service here. Then there is the dark side that always trys to find new ways to steal our personal info for nefarious reasons. IMHO, regarding cloud computing, we ain't there yet!
step 2
Plug into usb and start up tg downloader. make sure your tg01 shows up in the port section, then click browse
locate the file wp7boot.bin then select open.
Click to expand...
Click to collapse
Hey Jonny, i'm trying your guide, but i'm very anxious because of the many people who crashed their phones. So i want to do it very carefully. I did step 1 of your guide and now the white led on and i plugged it into my pc. but then, it showed me that the device "Toshiba DL" wasn't installed succesfully as you can see in the attached screenshot:
What can i do?
doess your tg01 show up in the port section?
DerSchorsch1 said:
Hey Jonny, i'm trying your guide, but i'm very anxious because of the many people who crashed their phones. So i want to do it very carefully. I did step 1 of your guide and now the white led on and i plugged it into my pc. but then, it showed me that the device "Toshiba DL" wasn't installed succesfully as you can see in the attached screenshot:
What can i do?
Click to expand...
Click to collapse
Verify your USB connection
Try diffrent USB ports
Take out SD card and SIM card
Try to reboot the computer
doess your tg01 show up in the port section?
Click to expand...
Click to collapse
no it isn't
Verify your USB connection
Try diffrent USB ports
Take out SD card and SIM card
Try to reboot the computer
Click to expand...
Click to collapse
i tried everything, but nothing works. i have a 64bit Win 7 Operating System.
Do i have to install the driver manually?
i dont know much about win 7 os im using vista and all the drivers and everything where all installed ages ago so i cannot remember much
I plug into usb and start up tg downloader. i make sure my tg01 shows up in the port section, then click browse
locate the file wp7boot.bin then select open.
The result: appear a message ,,invalid fileheader;
any suggestion?