Related
I feel like a total IDIOT !!!
I was messing around with my TyTn trying to unlock the ext rom.....
I installed fit4cat 1.0 checked it out...didn't do anything with it.
My TyTn started acting a little strange..so I did a hard reset.
When it reboot during the customization process it tells me:
\Extended_ROM\MT_ShortcutMMS-Hermes.CAB does not exist.....
then it freezes!!!!!
What did I do !!! I'm a fool!
Can someone help me out?
I just want to reset it and get the ext rom installed..
btw..i have bootloader 1.14
ok...i kind of got things going again.....!
I still get the message about the missing .cab file!!
I can now access the ext rom folder.....now the question is how do I instal .cab files for the ext rom?
I downloaded the appropriate ext rom version for my device and it contains a bunch of .cab files, one of them being the missing file
How do I get it in there...do I simply instal it like a standrd .cab file?
Does it need to be installed in the ext rom ?
hahaha your not the only one... what you need to do is visit the wiki here and download the appropriate ExtROM for your device and... use fid4cat to unhide and unlock the EtxROM and simpy copy the missing file back there... re lock the ROM using fid4cat and hard reset it....
walshieau said:
hahaha your not the only one... what you need to do is visit the wiki here and download the appropriate ExtROM for your device and... use fid4cat to unhide and unlock the EtxROM and simpy copy the missing file back there... re lock the ROM using fid4cat and hard reset it....
Click to expand...
Click to collapse
ok.....where do you copy the missing files? at the root level of the ExtRom folder?
There's other folders in there:
Program Files
WMDRM
I don't see any other .cab files in the ExtRom folder of my device...is that normal? Should I copy all the ExtRom file I downloaded since I have none in the device ExtRom folder?
if you can see the extrom and there are no cab files inside it then you have somehow formatted your EtxROM, you need to copy all files from the relevant downloaded ExtROM onto your PDA in the ExtROM folder and relock the etxROM
walshieau said:
if you can see the extrom and there are no cab files inside it then you have somehow formatted your EtxROM, you need to copy all files from the relevant downloaded ExtROM onto your PDA in the ExtROM folder and relock the etxROM
Click to expand...
Click to collapse
I did it...followed you instructions...and everything is working again !!!
I even have the video phone enabled now !!!!!!
YOU ARE THE MAN....!!! thanks for your help!
no problems... in future take a backup of everything before you do anything i have run into your situation many times hahahahaha....
Hi everybody ,
Well I upgraded my titan (htc p4000) with the last dcd kitchen. I want to know what I do wrong or something like that. I want to add prgram and utilitie by the keiser kitchen. I took package and utiliti, the base rom of dcd kitchen and I cook a rom with keiser kitchen: after few minute that say it done, but i d'ont see where the cooked rom are or the utiliti to instal the rom. Thanks and sory for my english if it is bad ...
If you used DCD's kitchen, the output file should be in a folder named RUU wherever you unzipped the kitchen. The file will be named RUU_signed.nbh
If you used ppckitcen's buildos, the output file will be found in your documents folder in a subfolder called Buildos RUU. The file will also be called RUU_signed.nbh.
You can always search for files with an .nbh extension.
The program used to flash the rom will be Rom Update Utility, hence the heavy use of the term RUU.
Flashing via memory card or SD card method is generally better. Read the wiki for more info.
Hi guys, I've been reading many topics to "save" my original ROM that came with my HTC TP T7272.
I has already downloaded the itsutilsbin, made the 4 parts of de .RAW files usind "pdocreate" command, and continuing with the proceeding, I separated the Part01 and Part02 to use the Kitchen.
But watch happen, is that there is a part of the process that I have to download a "shiped" file.
"2. Download the WWE BaseROM to use in the reconstruction process here http://rapidshare.com/files/138980371/RUU_Raphael_HTC_WWE_1.90.405.1_Radio_Signed_Raphae l_CRC_52.33.25.17_1.02.25.19_Ship.exe"
I downloaded it too, executed it, and It requires that I connect the phone to the activesync, so I connected and also it said: "NOTE: Making this process you will loose all your files and DATA" in red words
Wtf, I dont want to restart my phone, neither delete my files, I wanna ONLY make a backup of this, including the ROM, DATA, RADIO, all possible, because it I am using what I saw this "Kitchen".
The next step was execute the Kitchen's CMD, It said about "a base .NBH SHIPED FILE" ( I think It means some file of the step below ), asking for paste this NBH file on the BaseROM, that would go my Part01.raw and Part02.raw, to make it before execute the Kitchen.
So, I became afraid of loose all my phone's information and didnt make this .nbh, but I continued with the process, usind the Kitchen and making all, including the BuildOS.
But the RUU_Signed.NBH that was to appear didnt appear, only created some folders, and now I dont know what I do with the others files (Part00.raw and Part02.raw)
HELP ME, PLEASE
I'm already crazy
its so complicated!
unfortunately...
no helps
i would need it, but ok
I personally think you're putting in A LOT of effort, for little gain. Why not go download a stock ROM that matches the version of the one you got on your phone right now and be done with it ? Radio's are no special either... they can AAAAALLL be downloaded from this forum
basmareck said:
Hi guys, I've been reading many topics to "save" my original ROM that came with my HTC TP T7272.
I has already downloaded the itsutilsbin, made the 4 parts of de .RAW files usind "pdocreate" command, and continuing with the proceeding, I separated the Part01 and Part02 to use the Kitchen.
But watch happen, is that there is a part of the process that I have to download a "shiped" file.
"2. Download the WWE BaseROM to use in the reconstruction process here http://rapidshare.com/files/138980371/RUU_Raphael_HTC_WWE_1.90.405.1_Radio_Signed_Raphae l_CRC_52.33.25.17_1.02.25.19_Ship.exe"
I downloaded it too, executed it, and It requires that I connect the phone to the activesync, so I connected and also it said: "NOTE: Making this process you will loose all your files and DATA" in red words
Wtf, I dont want to restart my phone, neither delete my files, I wanna ONLY make a backup of this, including the ROM, DATA, RADIO, all possible, because it I am using what I saw this "Kitchen".
The next step was execute the Kitchen's CMD, It said about "a base .NBH SHIPED FILE" ( I think It means some file of the step below ), asking for paste this NBH file on the BaseROM, that would go my Part01.raw and Part02.raw, to make it before execute the Kitchen.
So, I became afraid of loose all my phone's information and didnt make this .nbh, but I continued with the process, usind the Kitchen and making all, including the BuildOS.
But the RUU_Signed.NBH that was to appear didnt appear, only created some folders, and now I dont know what I do with the others files (Part00.raw and Part02.raw)
HELP ME, PLEASE
I'm already crazy
its so complicated!
Click to expand...
Click to collapse
I think I understand the question. You do not want to execute the file, that will install it on your device. Get 7 zip (google it), install it on your computer, right click the file and will have options for EXTRACTING the file. Extract it to a folder of your choosing and inside will be the RUU_Signed.nbh your looking for. Then copy and paste parts 1 and 2 along with the ruu into your base folder rom inside the kitchen, and continue to follow the directions. Hope that helps
HI
I'm a regular user for cooked roms, (CDMA ENERGY mainly)... Sometimes I need to make a hard reset but with PIM backup, XDA_UC, etc.. I'm in no time running at full speed again.
My problem is with a freeware application RoboformPPC this installation comes only in an exe file, thus needing a computer to make the installation.
Is there anyway during the install process or after, that I could get the cab it transfers via activesync to the phone?
This way I can have it on my SD card and install it after a Hard Reset.
I have write them few days back, but still no answer from them.
Any help would be really appreciated. Thank you.
Cab
Here you go, just a small tip if you download 7-zip and extract the exe file, you find all the cab's inside.
Rataplan said:
Here you go, just a small tip if you download 7-zip and extract the exe file, you find all the cab's inside.
Click to expand...
Click to collapse
I've had a Hommer moment... *facepalm*
Thank you very much!
I did try with WinRar, then with Universal Extractor with no luck.
7Zip did it.
And to think I had melted my brains for days trying everything.... Sigh...
THANK YOU.!
Ok, so here's what I'm trying to accomplish.
I can't stand having the awful standard alarms/notification sounds that are provided on most WM roms, so I went and redid one. The attached file is a Windows notification sound that I've renamed and converted to work on my topaz in place of "alarm2", hence the filename.
In short, I don't want to have to use total commander winCE every time i flash and want to change that file out (I can't overwrite it using windows explorer or file explorer cuz I can't overwrite system files). So i had an idea.
I figured I'd make a .NBH file to flash to the device after I flash my rom on there that ONLY replaces that sound file with the new one (Eventually I'd like to incorporate my custom splash screens into it but that's only a thought at this point). This is where my question/problem comes in...
I've looked around on the forums for some type of "rom builder" or .nbh creator or utility, and I've found alot of things that will convert .nb into .nbh and other features, but nothing that seems to do what I'm wanting.
I'm NOT a developer really; im more of a concept person, and if I can accomplish this without having to learn a language all the better, but I'm not sure where to start with this.
Sorry about the long post, and thanks in advance for any help you can offer!
Hi,
what about using sashimi or UC? this would save you a flash...
you can automate the process. that's what i do when i flash and i want to get back the ringtones.
good luck
Use total commander. it will let you overwrite system files and files that are in use.
Solarenemy68 said:
Use total commander. it will let you overwrite system files and files that are in use.
Click to expand...
Click to collapse
Yea, that's what I've been doing so far... It's still kind of a pain waiting for the Windows folder to load and then replacing it (It can take awhile)... I should've mentioned in the first post that it was an alternative to this that I was looking for, and either a .nbh file or possible a cab file, though I can't see how a cab file could accomplish this since it's replacing a system file while it's in use...