Related
Just got a X01HT after Dec, version is 1.09. After reading all these threads, is it possible to use "DownGrade_SPL.rar" downgrade to 1.04 as I know sim unlock is still not available yet, just want to use chinese rom instead..........
Thks,
hi there,
please reaqd the wiki and the sticky threads on this board, the solutions ar eposted there.
cheers,
Thks, just tried and it successfully downgrade to 1.04......so now I can flash the chinese rom or i need to make it super CID before that??
I have the same case as yours. I tried to flash the rom to HK version but failed, so I installed cestar instead
mj13 said:
i need to make it super CID before that??
Click to expand...
Click to collapse
yes, you are right.
riderhk said:
I have the same case as yours. I tried to flash the rom to HK version but failed, so I installed cestar instead
Click to expand...
Click to collapse
Just tried flash it to HK rom and it worked....
mj13 said:
Just tried flash it to HK rom and it worked....
Click to expand...
Click to collapse
How can you make it? I have downgraded to 1.04. But can not flash the ROM
(Cause the CID. How can you make the CID??)
wiccawaiwai said:
How can you make it? I have downgraded to 1.04. But can not flash the ROM
(Cause the CID. How can you make the CID??)
Click to expand...
Click to collapse
1.04 has a bug. even if you get an error message when you try to burn a rom from another company, do nothing with your device and run the same update again on your pc. you can update the rom this time.
qtotter said:
1.04 has a bug. even if you get an error message when you try to burn a rom from another company, do nothing with your device and run the same update again on your pc. you can update the rom this time.
Click to expand...
Click to collapse
My system hangs when I run the flash program second time, so my x01ht is still in Japanese version
riderhk said:
My system hangs when I run the flash program second time, so my x01ht is still in Japanese version
Click to expand...
Click to collapse
is your bootloader 1.04?
mj13 said:
Thks, just tried and it successfully downgrade to 1.04......so now I can flash the chinese rom or i need to make it super CID before that??
Click to expand...
Click to collapse
Hello mj13,I looked around the posts and I could not find any solutions to downgrade my X01HT shipped after Dec from 1.09 to 1.04.Would you please tell me where did you find it or how to finish it?
And ,since downgraded to 1.04 ,does that mean I can unlock my X01HTto use another SIM card using the v2a version unlocker?
Thank you vey much.
qvik123 said:
Hello mj13,I looked around the posts and I could not find any solutions to downgrade my X01HT shipped after Dec from 1.09 to 1.04.Would you please tell me where did you find it or how to finish it?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
qvik123 said:
And ,since downgraded to 1.04 ,does that mean I can unlock my X01HTto use another SIM card using the v2a version unlocker?
Click to expand...
Click to collapse
If its pre December 2006 yes, if it's post December 2006 no.
qtotter said:
is your bootloader 1.04?
Click to expand...
Click to collapse
yes, already downgraded to 1.04.
Would you mind try to upgrade the rom again? If it doesn't work, please let us know
Hi,pof!Thank you very much for answering my question on the 1.09 to 1.04 topic.But I still got some questions.In the link you gave me it says I can not downgrade my bootloader unless I go to the IMEI something website and pay some dollars.Is that the only way to downgrade my bootloader?
And you told me even if I downgraded my bootloader,I still can not unlock my phone.That means,if I downgraded,I can burn other language rom (like English)but I can not use other company's SIM card.Am I right?
Sorry to bother you.Hava a good day!
Sorry to post it again after giving you a private message.
qvik123 said:
Is that the only way to downgrade my bootloader?
Click to expand...
Click to collapse
Legally yes, as you have SPL-1.09 now.
qvik123 said:
And you told me even if I downgraded my bootloader,I still can not unlock my phone.That means,if I downgraded,I can burn other language rom (like English)but I can not use other company's SIM card.Am I right?
Click to expand...
Click to collapse
Yes, because softbank 1.14 radio doesn't allow to be upgraded even if you flash another ROM this radio will be kept in your device.
Ok so I have a little problem with the whole 1.09 -> 1.04 thing.
I have been searching for a couple days or so and gathering some information about it, but I don't think that anyone has had my problem yet. I have a pre-Dec. x01ht, and I stupidly upgraded to 1.09 (don't ask why; I'm still kicking myself). So after trying to downgrade with a couple different versions of the 1.04 provided here with no avail, I found the downgrade_spl file that has been floating around. Each time I keep getting the same problems.
When I active sync with my computer and start the downgrade (upgrade?) process i get past the first preliminary check with the phone and when it jumps to the second check, the phone resets into the tri-color screen for about half a second, and then a white upgrade looking screen. after that the phone checks itself and everything says "ok", but it never resyncs with the computer. The computer stays on the screen that would show a progress bar, but after it hangs there it gets an error screen. i also tried doing everything from the boot mode (the tri-color menu), and that also gets an error. when i try from the boot mode, the both of the progress bars start, but before either go anywhere they both the computer screen comes up with an error in the program. it asks me if i want to recover or view the file, and recover also doesnt work.
Has anyone else had this problem, and if so how did you go about solving this dillema?
I need help phone stuck in bootloader and its not registering the usb syn cable being attached I think i just need to set it to boot to os. Have HARD-SPL.
ok got usb working again but ruu says it can't find device. is that because its already because its already in bootloader?.
edit- did an info 8 in mtty and got this
Block 0x3A8(936) is BAD block !!!
Block 0x3A9(937) is BAD block !!!
Block 0x3AA(938) is BAD block !!!
EDIT- finally got home and was able to reflash os with sd card and phone works now.
but what did you do to be able to flash?
everytime I try to flash it enters the BL and hangs. Then it says it cannot update. I've got a 1.09 BL
thanks
Read here:
http://forum.xda-developers.com/showthread.php?t=286755
giving more data:
which bootloader version on your device?
1.09
which rom on your device?
1.35.255.2
which RUU are u using?
HTC WWE version
which rom are u trying to flash?
2.11.255.1
Bootloader 1.09 is not compatible with new RUU version inside HTC's 2.11.255.1 ROM.
If you just run the shipped exe file (without unpacking), it will first upgrade your bootloader to 1.11 using the old RUU, then launch the new RUU and flash your rom.
BTW, i suggest you to read the hardSPL thread before attempting to upgrade
Ok, now I noticed that incompatibilty and used HArd SPL to upgrade to 1.11.
that's what it says now in threecolor bootloader.
But still when I try to upgrade it hangs on the bootloader saying HERM200 IPL-1.01 and HERM200 SPL-1.11 and USB in the white area. And in the PC it says OS information detecttion for ever!!
If I reboot it no problem, everything is working.
thanks for you help!!
ok, now that you have HardSPL-1.11 on your device, do this:
1. Use winrar to extract the contents of RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10_108_Ship.exe
2. You will see a file named RUU_Inside.exe
3. Use winrar again to extract the contents of RUU_Inside.exe
4. Run the RUU you'll find here, with device in bootloader mode.
Keep in mind that this will overwrite HARD-Spl with the shipped 1.11 bootloader, if you don't want that, read the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide
Well it worked!!! Thanks a lot!!!! any explanation for this? (i forgot to tell I was using vista)
But... eheheh now I found out http://forum.xda-developers.com/showthread.php?t=297849&page=2
and it happens the same.. when I run it... (after winraring the main file) it hangs on the BL! Damn!!!
Muster said:
(i forgot to tell I was using vista)
Click to expand...
Click to collapse
boh!
I know I know awfull mistake!!!
Why does this happens when I try to update? ANd why it worked the way you said it would?
Muster said:
Ok, now I noticed that incompatibilty and used HArd SPL to upgrade to 1.11.
that's what it says now in threecolor bootloader.
But still when I try to upgrade it hangs on the bootloader saying HERM200 IPL-1.01 and HERM200 SPL-1.11 and USB in the white area. And in the PC it says OS information detecttion for ever!!
If I reboot it no problem, everything is working.
thanks for you help!!
Click to expand...
Click to collapse
uhh... it should say SPL-1.11.Oli
It did not!! It says now 1.11!!
when I tried the upgrade to WM6 it used it's own bootloader 1.09 Ds and it changed again. Is it possible that 1.09 BL is definitevely not working in my TyTN?
Hi,
I have a Quest unit that is stuck in bootloader. I can exit bootloader via the titan_exitbl, but the rom is corrupt. It is running SPL-1.06.0000
I can't get an activesync connection, so is there another way to update the bootloader to the Olipro version, so I can load the sprint rom, etc?
I've tried updating the ROM via SD and it states not allow, which I presume means the unit is still locked. But since bootloader is the only working, how do I recover it?
Your phone isn't unlocked yet, so flash the stock rom and radio so you can boot into windows, unlock your phone with 2.40, then run the sprint update
gcincotta said:
Your phone isn't unlocked yet, so flash the stock rom and radio so you can boot into windows, unlock your phone with 2.40, then run the sprint update
Click to expand...
Click to collapse
I have not been able to find a stock Quest ROM. Is there one available?
lwesson said:
I have not been able to find a stock Quest ROM. Is there one available?
Click to expand...
Click to collapse
Is there one on the ppcgeeks ftp? most of the others are there.
Ok so I just got my new device and I tried to update the bootloader from 1.04 to 2.47 with the new SPL with the .exe file form here. It restarted to flash and it froze. What do I do? I can't boot it to the OS and I can't update the bootloader. Please Hlep ASAP. I am stuck with SPL-104 and windows 6
Thanks.
if you can't get out of bootloader you may have to flash a stock non gps rom.
I am jsut flashing the bootloader. It had the original stock ROM on it.
lafester said:
if you can't get out of bootloader you may have to flash a stock non gps rom.
Click to expand...
Click to collapse
lafe is right.....flash a stock non-gps rom.......when you tried flashing the Nuespl 2.47 you did do it via SD card correct?
yes I did. I flashed it on a Non GPS stock VZW ROM
JukEboXAuDiO said:
yes I did. I flashed it on a Non GPS stock VZW ROM
Click to expand...
Click to collapse
try flashing another stock non gps rom and then try to upgrade the BL again....this time try Olipro 2.4.....somehow the BL didnt flash correctly the only way out is to flash the stock non-gps rom and the proceed...
I am using OliPro 2.4 from the DCD ROM thread. Is that the wrong one? Its stuck ont he loading screen
JukEboXAuDiO said:
I am using OliPro 2.4 from the DCD ROM thread. Is that the wrong one? Its stuck ont he loading screen
Click to expand...
Click to collapse
No....but above you posted 2.47.....you could try Nuespl 2.47 it is the latest and greatest...go over to PPCgeeks and grab it off my sig over there....it runs fom the SDcard....also what have you tried to get it back?.....if you have not already try a hard reset first.....
Here I will save you some time
http://forum.ppcgeeks.com/showthread.php?t=30561&highlight=hardspl+2.47
yes I have tried hard reset. It keeps going to hte bootloader. Ok i used Olipro 2.40 using hte cmd prompt and did what it told me to. When it restarted it got stuck on the updating page. Now its just stuck onthe loading page.
JukEboXAuDiO said:
yes I have tried hard reset. It keeps going to hte bootloader. Ok i used Olipro 2.40 using hte cmd prompt and did what it told me to. When it restarted it got stuck on the updating page. Now its just stuck onthe loading page.
Click to expand...
Click to collapse
Can you enter BL?
Yes. It loads to bootloader 1.04 and then goes to update from the SD Card and its stuck on the loading screen
JukEboXAuDiO said:
Yes. It loads to bootloader 1.04 and then goes to update from the SD Card and its stuck on the loading screen
Click to expand...
Click to collapse
ok let me make sure I understand.....you are in BL? which are trying to Un-lock with Olipro 2.4 or nuespl 2.47?
I am truing to unlock Olipro 2.4
I am a little confused also. Its been awhile since I flashed olipro 2.4... Aren't you supposed to pull usb at some point during the install?
you have to follow ALL of the instructions for the flash to work.
Nuespl 2.47 is much easier to use. I would still recommend reflashing the stock rom so you can put nuespl on your sd (providing it is 2gb or less).
if you are in bootloader you can just run the ruu and it will flash.
JukEboXAuDiO said:
I am truing to unlock Olipro 2.4
Click to expand...
Click to collapse
and you are trying to un-lock with Olipro 2.4 via sd.....if that is so then that is the problem....
flyers2114 said:
and you are trying to un-lock with Olipro 2.4 via sd.....if that is so then that is the problem....
Click to expand...
Click to collapse
Its stuck on the loading screen.
Can someone tell me where I can get the dman nbh file so I can re flash it back to what it should be so I can start over? All I have is a damn phone with no OS and bootloader 1.04.
JukEboXAuDiO said:
Can someone tell me where I can get the dman nbh file so I can re flash it back to what it should be so I can start over? All I have is a damn phone with no OS and bootloader 1.04.
Click to expand...
Click to collapse
1.04 is verizon's stock bootloader. Do these steps with an SD card. You can try using Verizon's stock OS/Radio... but it never works for me the first time.
1) Download the Sprint latest Rom Update. Right click the EXE file and extract the files.
2) Copy and rename Ruu_signed.nbh to TITAIMG.nbh on the storage card.
3) Put the card into the phone...Power+Camera+Reset. This will get into bootloader, and load the image.
When complete.... soft-reset.
DO NOT LET CUSTOMIZATIONS RUN!!!
When you get to the WM 6.1 screen and it asks for you to touch screen... DO NOTHING!!!
Remove SD card.
Connect your USB cable... get activesync to see it... Just tell it to cancel the syncronization.... Then run Olipro's Titan Unlocker 2.4.
When it's done getting 2.4 on it.... Copy the radio rom you want IE 3.42.50 to the SD card and flash away. Then the same for the new OS.
Thank you so much dude. I am gonna get this thing moving today. Thanks again!
JukEboXAuDiO said:
Thank you so much dude. I am gonna get this thing moving today. Thanks again!
Click to expand...
Click to collapse
No problem. It does get tricky, but once you get the hang of the concepts.... flashing back and forth is easy.
Hi, I need help here. I got an At&t HTC TITAN PI3900 stuck in bootloader mode - When turned off, pressing the power button or plugging the charger or usb would automatically brings the bootloader screen.
Things that I did:
Upgraded to the SPL (2.6?) from the HTC website to fix the unlock code problem re-entering it everytime I reboot.
Forced flash the WP 7.8 via seven-eighter, and everything is just fine.
Tried debranding and installinhg HSPL but all failed:
Goldcard via Y Cable was ok but when trying to flash EU ROM (IMG_Eternity_HTC_Europe_1.09.401.02_Radio_16.23.02.09_A_16.24.00.23_Signed_ETERNITY_RELEASE) via Goldcard method, it says "NOT ALLOW"
Tried to flash via Goldcard also the Cingular ROM ( IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE) but always fails - OS and RADIO - Internal error or something
At this moment, the phone is still fine and working perfectly
The I flash via RUU (bootloader mode) the stock Cingular ROM same as the above,
( IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE), error came - ERROR [226] FLASH WRITE ERROR
Tried to flash again the 2 ROMS mentioned above a couple of times via RUU, re-downloaded the ROM would still give me the same error. Also tried the TitanAdvancedRUU-V1.0.5, but still the same error.
Now my phone is stucked at bootloader screen. It can't enter also the USB HOST MODE, I don't know why
The bootloader screen says:
PI39100
SPL-2.6.160015.3 (140182)
eMMC SND 15188MB
TOUCH A1(F:81, ID:1. V11, B:F8)
Radio-16.23.02.26A
Serial
APPSBL
IMAGE CRC
FACTORY RESET
Any help or suggestion would be greatly appreciated
Help
Nevermind, I got it working again! I just reflashed the stock 2.6 SPL from HTC and BOOM!
da_mayhem said:
Nevermind, I got it working again! I just reflashed the stock 2.6 SPL from HTC and BOOM!
Click to expand...
Click to collapse
i can't find stock roms on the htc site.. can you give me the link?
da_mayhem said:
Nevermind, I got it working again! I just reflashed the stock 2.6 SPL from HTC and BOOM!
Click to expand...
Click to collapse
There is no mention of SPL205 in any of your steps; had you successfully done that your SPL would be 2.5.160015 not 2.6.160015; it is once you've successfully flashed that step you would proceed to HSPL; however, if you're using the official stock 7.8 you're fine.
Tgodfather said:
i can't find stock roms on the htc site.. can you give me the link?
Click to expand...
Click to collapse
No bro, it's just the bootloader update posted on the HTC site, no roms posted over there
berrywr said:
There is no mention of SPL205 in any of your steps; had you successfully done that your SPL would be 2.5.160015 not 2.6.160015; it is once you've successfully flashed that step you would proceed to HSPL; however, if you're using the official stock 7.8 you're fine.
Click to expand...
Click to collapse
Yes I wasn't able to get it to SPL 2.5 that's why I can't proceed to the HSPL procedure, I don't know why I was having a "NOT ALLOW" error when flashing stock Cingular ROM via Goldcard
da_mayhem said:
Hi, I need help here. I got an At&t HTC TITAN PI3900 stuck in bootloader mode - When turned off, pressing the power button or plugging the charger or usb would automatically brings the bootloader screen.
Things that I did:
Upgraded to the SPL (2.6?) from the HTC website to fix the unlock code problem re-entering it everytime I reboot.
Forced flash the WP 7.8 via seven-eighter, and everything is just fine.
Tried debranding and installinhg HSPL but all failed:
Goldcard via Y Cable was ok but when trying to flash EU ROM (IMG_Eternity_HTC_Europe_1.09.401.02_Radio_16.23.02.09_A_16.24.00.23_Signed_ETERNITY_RELEASE) via Goldcard method, it says "NOT ALLOW"
Tried to flash via Goldcard also the Cingular ROM ( IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE) but always fails - OS and RADIO - Internal error or something
At this moment, the phone is still fine and working perfectly
The I flash via RUU (bootloader mode) the stock Cingular ROM same as the above,
( IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE), error came - ERROR [226] FLASH WRITE ERROR
Tried to flash again the 2 ROMS mentioned above a couple of times via RUU, re-downloaded the ROM would still give me the same error. Also tried the TitanAdvancedRUU-V1.0.5, but still the same error.
Now my phone is stucked at bootloader screen. It can't enter also the USB HOST MODE, I don't know why
The bootloader screen says:
PI39100
SPL-2.6.160015.3 (140182)
eMMC SND 15188MB
TOUCH A1(F:81, ID:1. V11, B:F8)
Radio-16.23.02.26A
Serial
APPSBL
IMAGE CRC
FACTORY RESET
Any help or suggestion would be greatly appreciated
Help
Click to expand...
Click to collapse
had the same problem..scared the crap out of me...Installing SPL 2.6 seems to be working for this problem...even though we are stuck on 2.5.
Did you manage to get HSPL working?
da_mayhem said:
Did you manage to get HSPL working?
Click to expand...
Click to collapse
nada...nope...
I tried pretty much everything. So has Nikola, on this board...
I think some AT&T Titans and their nand memory get shot after trying to HSPL or debrand.
-Which therefore could be linked to a manufacturing problem with the Titan.
---As technically, my other AT&T Titan had no problem whatsoever getting the HSPL installed.
I guess I have to stop trying now Guess we'll be stuck at the official 7.8 for a while not until DFT releases something for us
da_mayhem said:
I guess I have to stop trying now Guess we'll be stuck at the official 7.8 for a while not until DFT releases something for us
Click to expand...
Click to collapse
Yea....
Anyway yea, at least you get 7.8 and not a brick -or a phone that is stuck at 7.5.
da_mayhem said:
No bro, it's just the bootloader update posted on the HTC site, no roms posted
Click to expand...
Click to collapse
it is just what i'm looking for dude! I'm stuck at the 1.8 bootloader version. Can you link me the update? I'm italian, and in HTC.it there isn't any update
EDIT: nevermind, i've found it