Related
How to upgrade from WM5 TO WM6
To upgrade your prophet to WM6 I recommend that you first of all downgrade to the NVID version of WM5 AKU2.2 and get the latest Active Sync:
1. Download the NVID(no vendor) AKU2.2 rom for WM5 here :http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe YOU CAN USE Step1 of PdaMobiz or PDAViet Temp INSTEAD OF NVID(no vendor) AKU2.2 ROM...
2. After it has been downloaded get the latest Active Sync from Microsoft.com
3. Install active sync, you might need to reboot
4. When your computer has rebooted, run the file from step No 1 . Follow the steps, remember that it can take some time and seem to stuck at 80% and higher, but just wait.
5. When you have done this, your pda will reboot. After it comes with the welcome to windows mobile screen,"Tap Here To Begin",JUST LEAVE IT. In fact don't touch your device before the next steps are finished.
6. Now download one of the WM6 versions( http://forum.xda-developers.com/showpost.php?p=1279985&postcount=1 )
7. Now find a file named Upgrade.bat,and run it.(you don't have to run Step1 of PdaMobiz or PDAViet Temp,as you have already downgraded to AKU2.2)
8. Wait until the upgrade finishes(usually takes 12-15minutes)..WAIT WAIT WAIT
9. A message will be displayed in the dos box,and it will say that the upgrade is finished etc....etc...,now you HAVE to HARD RESET,to finish the upgrade and enjoy you new WM6!
How to downgrade from WM6 TO WM5
The downgrade process from WM6 to WM5 is pretty simple. All you have to do is to downgrade to WM5 NVID and after that upgrade to the WM5 you want:
1. Download the NVID(no vendor) AKU 2.2 rom for WM5 here :http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exeYOU CAN USE Step1 of PdaMobiz or PDAViet Temp INSTEAD OF NVID(no vendor) AKU2.2 ROM...
2. After it has been downloaded get the latest Active Sync from Microsoft.com.. Simply search for "Active Sync"
3. Install active sync, you might need to reboot
4. When your PC is ready run the NVID file you downloaded in step1 and follow the guide, remember that it can take some time and seem to stuck at 80% and higher, but just wait
5. When its done downgrading to the NVID WM5 rom, you prophet will reset and you can upgrade to the version of WM5 you want.
NOTICE
If you use a different AKU 2.2 ROM(like PDAViet Temp),you may have two EXEs in the folder you extracted.Be careful and use the one that is made for your device:
FILENAME G3.EXE
is for G3 devices:IPL x.xx.0000, SPL x.xx.000.0 (this is shown when you reset)
FILENAME G4.EXE
is for G4 devices:IPL x.xx.0001, SPL x.xx.000.1 (this is shown when you reset)
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
How to switch or upgrade/downgrade between WM6 versions(for example PDAViet->Trueneytral)
1. First you have to downgrade to WM5 AKU2.2 using the WM6->WM5 guide(some say that you don't have to do that,but i believe that it's better to downgrade first rather than making a simple overwrite)
2. Now follow STEP 5 of the WM5->WM6 guide
Device doesn't connect to PC after flash
If your device doesn't connect to your PC after flash,just enter bootloader(press camera button+while pressing soft reset and hold,until a tri-color screen shows up),and flash the NoVendor WM5 Rom: http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe .Then repeat the whole process...
----------------------------------------------------------
KEEP IN MIND:
UPGRADING CAN BE DANGEROUS,YOU ARE RESPONSIBLE FOR THE DAMAGE TO YOUR PHONE
DO NOT RESTORE BACKUPS FROM ANY ROM OTHER THAN THE ONE IT WAS CREATED ON
THERE IS NO "BEST WM6 ROM",THE BEST IS THE ONE THAT WORKS BEST FOR YOU
(part of the guide is taken from Da9L's guide,in the WM6 Rom Collection)
I will edit/update this post soon and clean it up, ask questions in another thread, and by god please read the wiki first, 90% of the questions asked are answered in the wiki....
WM6 Upgrade Guide...reply
great info sir! thanks so much! downloading...i'll be happy to send feedbacks on this WM6 ROM! thanks again!
Thanx a lot tonydeli7 , very very good guide and a lot of ppl really needed it
Great
Thanks to you all. I have Qtek S200 and trobuled with WM6 it wonderfull guide for me thank you very much.
I need to downgrade to WM5, 'couse I cannot boot anymore. After running the setup I get an error that the device cannot be found. I have connected the S200 with the boot loader running.
Edit: Now it works on an "old" WinXP machine.
Huge Problem!!
Ok guys I am having a huge problem. I tried to upgrade to WM6 but when running the RUU and changing the rom, it encountered an error saying the nbf file cannot be installed on my pda phone and now my phone is stuck(i think permanantly) on the bootloader screen.
No matter what I do to try to fix this, IE: restart device, power down by removing battery, try to run the RUU again, nothing helps. Its is really stuck and I really need this cell phone.
PLEASE HELP IF YOU CAN.
Dan.
dharvey4651 said:
Ok guys I am having a huge problem. I tried to upgrade to WM6 but when running the RUU and changing the rom, it encountered an error saying the nbf file cannot be installed on my pda phone and now my phone is stuck(i think permanantly) on the bootloader screen.
No matter what I do to try to fix this, IE: restart device, power down by removing battery, try to run the RUU again, nothing helps. Its is really stuck and I really need this cell phone.
PLEASE HELP IF YOU CAN.
Dan.
Click to expand...
Click to collapse
Put you pda on bootloader mod... and try any of this rom's i have managed http://forum.xda-developers.com/showthread.php?t=316062
Stay cool!
I followed the instructions carefully, and my phone (Qtek S200) seemed to boot with WM6.0
However, after aligning screen, it tried to initialize the phone with some extended roms, a procedure which failed, and I had to soft reset.
After reboot, it seems to work fine.
Is it?
EDIT: Another thing I noticed is that keyboard is in THAI !!! How can I make US the default? Olso, I have Resco keyboard GR edition. Will this work with WM6?
tonydeli7 said:
1. Download the NVID(no vendor) AKU2.2 rom for WM5 here :http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Click to expand...
Click to collapse
Is this G3 only, or both?
I'm asking, because in PDAviet's temp file there are two different rom updaters, but in the file linked above there is only one.
yoda_143 said:
Is this G3 only, or both?
I'm asking, because in PDAviet's temp file there are two different rom updaters, but in the file linked above there is only one.
Click to expand...
Click to collapse
i don't know mate.i believe you can use pdaviet's temp instead of aku2.2 nvid...
Another thing I noticed, is that it looses pairing with my bt handsfree...
I am making the pairing, and works fine. However, when at night I am shutting off my hf in order to save battery, the next morning the pairing is gone.
Any solution to this?
i hav a problem!i have sucessful boot wit wm6 and everythings fine but only i can't access to contacts,everytme i press it will automatic switch back to today screen...and there is no autoconfig???anyone help???i can't save my contacts...
dufchan said:
i hav a problem!i have sucessful boot wit wm6 and everythings fine but only i can't access to contacts,everytme i press it will automatic switch back to today screen...and there is no autoconfig???anyone help???i can't save my contacts...
Click to expand...
Click to collapse
You've forgot to do a hard reset after flashing, please read one of the flashing guides.
I-mate Jamin
hello evrybody
i just wanted to know if i can upgrate my WM5 to WM6 on my I-mate JAMin?
rondol1 said:
You've forgot to do a hard reset after flashing, please read one of the flashing guides.
Click to expand...
Click to collapse
thank u very much!!now my dopod working fine!!thanks a lot!!
thanx for the guide
help me please..
P4k1t0 said:
Put you pda on bootloader mod... and try any of this rom's i have managed http://forum.xda-developers.com/showthread.php?t=316062
Stay cool!
Click to expand...
Click to collapse
how to do that?
thx..
Choice of ROM
Hello guys, tanks for a so nice job !
I would like to have more information about the choice of ROM.
I don't want any special feature, just the row wm6.
no programs added, no tweaky today, no bugs, no battery problem, etc etc
which one would fit that the best ?
thanks
Thnx for this man, much appreciated!
!!CRUX!! MUST READ!! LazyTool & HardSPL & 3 color screen solution before BRICK~~~~~~~
20100130: post 2 updated
[size=+2]!!!!!!!!if you messed up with G3 & G4 model before flashing, your Prophet will be PERMANENTLY dead (unless a replace of mainboard +_+) DON'T TRY IT @ HOME !!!!!!!! [/size]
[size=+3]( DON'T forget TO HARDSPL YOUR DEVICE before flashing !!! )[/size]
20091204 update:
[size=+2]1. Lazy_Tool is for flashing all 6.1 and 6.5 prophet roms but NOT FOR VISTA or se7en operated computers.......2. VISTA FLASHING click HERE -- thanks to dear CLOUDYFA[/size] P.S. You can just replace the "*.nbf" FROM the UNZIPPED folder
WANNA FLASH FOR WM6 ROMS? please read @ end of post #1 ^_^ )
[size=+3] Additional RECOVERY steps for 3 colors screen boot-up after flashing...[/size][/color]
a. Force Bootloader Mode MANUALLY (see below Point 4 for How To ),
b. Then flash NVID - a AKU 2.* WM5 rom for recovering your Prophet.... ( P.S. the boot up screen will be changed to Qtek...)....^_^
Click to expand...
Click to collapse
**************************************
1: 3 coloured screen??????????? "DON'T PANIC",
2: 99.9999% CAN BE RECOVERED BY
DOWNGRADE TO WM5 WITH MANUALLY entering BOOT_LOADER MODE + flashing the NVID
3: IF USB CONNECTION ERRORS, TRY REMOVE BATTERY FOR 1 MINUTE and try again.
4: FORCE TO BOOTLOADER MODE MANUALLY HOW TO....
4.
4a. keep pressing the Commgr button and
4b. in the same time keep picking/sticking the bottom softreset button with stylus for one second,
4c. [size=+2][highlight] THEN ONLY ONLY RELEASE THE STYLUS[/highlight][/size] and wait for the screen
TO CHANGE to the three color screen (bootloader mode),
4d. then release all and go to step 10 below..... !!!
Click to expand...
Click to collapse
Steps to HARDspl your prophet
5. connect your prophet to computer (activesync done and Hardreset before so will be highly recommended !! )
5.1. In the Upgrade_HardSPL folder that you had downloaded AND UNZIPPED,
then look for the xxx.bat file and double click it (updated 20091114), all activities will only take 2-3 minutes and nothing will be seen in the Prophet screen.
(P.S. if connection Error, NO PANIC, soft reset OR remove battery for half a minute and try again.)
6. after the flash completed, it will restart automatically.
7. done!! in your prophet, nothing will be changed VISIBLY EXCEPT the digits IN the reboot screen !!!!!
and while booting now YOU MUST BE ABLE TO SEE information like:
Prophet Hard SPL isn't yet completed until the SPL shows
2.G3.4PDA (FOR G3 PROPHET) or 2.G4.4PDA (FOR G4 PROPHET)
Click to expand...
Click to collapse
(P.S. REPORTED !!! some device are not able to complete the CHANGE VIA Hardspl,
(like mine, NEVER TO 2.Gx.4PDA) if so, just flash the NVID then flash any 6.1 rom with LazyTool)
[size=+3]Tradition UPGRADE (OLD) method (for ROM with OS.nb )[/size].... ,
1. Connect to PC, activesync now OK, Flash with PVtemp or NVID for prophet for step 1
WHEN FINISH,
2. TOUCH NOTHING, HANDS-UP !!! leave it alone, just don't touch your prophet...... ( WM5 wwe flashing now finished)
3. [size=+2]ACTIVE SYNC WILL POPS UP soon, JUST DON'T TOUCH IT (disregard it) [/size],
4. THEN RUN UPGRADE.BAT from PC to flash to WM6 (should be included in your old ROM package with OS.nb )
5. follow the on screen steps and YOU WILL GET WHAT YOU HAD EXPECTED THEN~~~~~
[size=+2]PLEASE REPLY IF YOU THINK HELPFUL ABOUT THIS MESSAGE !! ^_^ [/size]
Click to expand...
Click to collapse
P.S.
dioxda2 said:
@VISTA FLASHING click HERE -- thanks to dear CLOUDYFA
@ Lazy_Tool + Cloudyfa's 19213 clean rom , simple, fast, error free, a 2 in 1 upgrade package
if error persists while upgrading with this tool,
Please ask yourself...
I. did I softreset yet? did I make the Prophet recovery? (remove battery and sim card),
II. will the USB port of my PC currently too heavy loaded?
III. did I restart my PC yet?
IV. any connection related software other than activesync is running?
V. did I try the rear panel USB ports?
VI. is my PC currently too busy?
VI. did I try other USB cable yet?
VII. did I try the force bootloader manually before upgrade?
VIII. Did I hardreset my prophet after new flash(if everything had done but no help~~~~ ) ^_^
IX. Is the battery problems?
if anyone found this useful, please submit a simple reply..........
Click to expand...
Click to collapse
all about dioxda2
~~~ What had happened to my first Prophet? pLEASE CLICK HERE
~~~All my cooked Prophet roms :
1d - Xtra Phrophet - 19214,
1b - U.C. Version - 19214,
1d - SPEED KING / Storm version - 19214 - Recommended!!,
2a - eXtreme PROPHET - 20270,
2d - ULTIMATE EDITION - 20270,
3d - Advanced version - 20273,
4d - with B/T Bug - 20275,
5d - buggy??? - 20721,
7d - THUNDER - 20748,
8d - eEXECUTIVE version - 20749 ,
9d - clean version - 20749,
1d - M2D-Lite - 20755,
1d- M2D 8Tabs version - 20755 - Recommended!!,
1d - m2d+mOtOsURF dual - 20755,
1d - SuperMarket version 1 - 20755 - Recommended!! for advance users,
1d CHINESE INPUT + M2D 7 tabs + 6 configurable iPHONE - 20755 - Recommended!!,
1d - cLEAN_tURtLE 1 & 2 - 20759 - for advance users only,
20755 - fINAL with iPhone?Today built - Recommended!!
WM6.5 - 1d - 21159 CLEAN n Fixed, for FUN,
WM6.5 CHS roms - 21806 / WM6.1 - 21127 for fun ,
WM6.5 CHS roms - 21222/21231/21502 for fun,
LAZYTOOL THREAD~~~
HardSPL could sometimes not 100% perfect, as my experience. My Prophet stuck at Tri-color screen once after flashing a WM6 Rom, and I had to flash the official WWE AKU 2.2 Rom with IPL/SPL to set it to work.
SoftSPL method is more reliable, IMO.
100% success in HardSPL upgrade......
ufriendxda said:
HardSPL could sometimes not 100% perfect, as my experience. My Prophet stuck at Tri-color screen once after flashing a WM6 Rom, and I had to flash the official WWE AKU 2.2 Rom with IPL/SPL to set it to work.
SoftSPL method is more reliable, IMO.
Click to expand...
Click to collapse
Please look here for reference..
1. if your device had been HardSPL successfully, the you can......
a. copy the 3 files ( in jumpspl.zip) to the root directory of the prophet
( JUST NEXT TO THE " \WINDOWS" FOLDER),
b. soft reset prophet,
c. run the SPL.lnk in the prophet,
d. then continue step 2 ( only 5 minutes..... finish.... so cool~~~~ )
100% success ~~~~
dioxda2 said:
Please look here for reference..
1. if your device had been HardSPL successfully, the you can......
a. copy the 3 files ( in jumpspl.zip) to the root directory of the prophet
( JUST NEXT TO THE " \WINDOWS" FOLDER),
b. soft reset prophet,
c. run the SPL.lnk in the prophet,
d. then continue step 2 ( only 5 minutes..... finish.... so cool~~~~ )
100% success ~~~~
Click to expand...
Click to collapse
I always do it like that...So quickly...
Why Why Why???
oko2600 said:
I always do it like that...So quickly...
Click to expand...
Click to collapse
yes, you are right....
By the way~~~~~
Why no one read this thread before one is posting or shouting for help????????
In fact, HardSPL isn't necessary to flash New WM6 Rom.
Just use SoftSPL, 100% OK.
haha ^_^
ufriendxda said:
In fact, HardSPL isn't necessary to flash New WM6 Rom.
Just use SoftSPL, 100% OK.
Click to expand...
Click to collapse
Not about the necessity but.....
Hard SPL takes 3.5 minutes to flash completely,
but the old method......... PVtemp + Upgrade = ~30minutes....
just about the efficiency and the convenience... ^_^
dioxda2 said:
Not about the necessity but.....
Hard SPL takes 3.5 minutes to flash completely,
but the old method......... PVtemp + Upgrade = ~30minutes....
just about the efficiency and the convenience... ^_^
Click to expand...
Click to collapse
Ok, let's put it in another way:
If our Prophet has IPL/SPL 2.××, just do SoftSPL before flash new WM6 Rom.
No need to flash HardSPL.
Is it not simple?
dioxda2 said:
I saw many people here suffering from such cases.....
...
...
...
you've better.... ( FOR NEW METHOD)
1. After flashing hardSPL for g3 ( step 1) all went ok.
then BEFORE flashing/upgrading your Prophet to WM6,
please copy the 3 files from the jumpspl.zip to the root directory of
your G3 Prophet ( JUST NEXT TO THE " \WINDOWS" FOLDER,
(attachached, pease unzip and copy then paste)
2. UNPLUG YOUR DEVICE from PC,
3. Execute the SPL shortcut IN THE DEVICE, then you see a all bright or white screen,
Then plug back the USB port ( connect to computer) the device, THEN use the Rom Upgrade Utility (RUU) to the rom you like ( all activities can only be seen in the PC screen, nothing will be shown on the prophet....
4. Finally, after 100% ( at 85% may take to wait a bit longer, just be
patient, as it may look like hang for about 2 minutes) just wait, all will went
ok AND OF COURSE, after it auto-restart, ALL will be OKOKOK !!!
( better hard-reset for once more )
I am using a G3 too. Same experience before... ^_^
no more prolems!!!!!
Click to expand...
Click to collapse
The attached jumspl file is broken "can you upload the file again.
Thank's in advance
???
trxerz said:
The attached jumspl file is broken "can you upload the file again.
Thank's in advance
Click to expand...
Click to collapse
Hey, the file works fine... just attached to this forum, not web
outside. I had tested it and download normal~~~
Please try again
ufriendxda said:
Ok, let's put it in another way:
If our Prophet has IPL/SPL 2.××, just do SoftSPL before flash new WM6 Rom.
No need to flash HardSPL.
Is it not simple?
Click to expand...
Click to collapse
But if you want to back to the original ROM you need HardSPL
trxerz said:
But if you want to back to the original ROM you need HardSPL
Click to expand...
Click to collapse
No, HardSPL is not needed to flash back to WM5 Rom.
Just put the Prophet into bootloader(Tri-color screen) and take RUU of WM5 Rom, will surely succeed, anytime.
How do you put spljump files to windows folder on the device when only the USB synchro mode (Red Green Blue screen) is displaying ?
Nothing work.
I've patched hardspl
Jumpspl too
but
I can't install Wm6 rom
always stay bootloader mode.
there is no gsm no radio
only shows IPL and SPL ( 2.00 / 2.15 )
I said......
EQUANCY said:
I've patched hardspl
Jumpspl too
but
I can't install Wm6 rom
always stay bootloader mode.
there is no gsm no radio
only shows IPL and SPL ( 2.00 / 2.15 )
Click to expand...
Click to collapse
Be patient!!
you must Hardspl sucessful ( SPL= 2.G3.4PDA .. something like this)
, or you cannot flash new methods,
please read through my content at the 1st page here....
or look to hma4 ......
I had made it easy for you... please folLow steps CAREFULLY
enjoy !!!
NO SHORTCUTS !!!!!
dioxda2 said:
Be patient!!
you must Hardspl sucessful ( SPL= 2.G3.4PDA .. something like this)
, or you cannot flash new methods,
please read through my content at the 1st page here....
or look to hma4 ......
I had made it easy for you... please folLow steps CAREFULLY
enjoy !!!
NO SHORTCUTS !!!!!
Click to expand...
Click to collapse
Yea, I must agree with Eqancy. Tried your method several times, the SPL says just what is should (2.G3.4PDA) but bootloader kicks in every time and nothing seems to work any longer.
Seems like I must be back to the old method.
Nothing works still same!
There is only SPL 2.15 not anymore
I've tried everything but
Results are same.
I've Wm6 before but it was slow and I want to change rom.
and I've read to threads for how to.
I had earlier IPL 1.0 only that but rom was G4 version.
and it was very slowly.
and I've upgraded spl to 2.20
but after this upgrade I can nothing to upgrade
only Qtek's 2.20.7.34_2.20.7114_02.19.21 rom.
I've upgraded/installed Hardspl ( GSM version appears on bootscreen and HTC logo but still waiting )
And after this upgrade.
I did jumpspl too but...
every things same.
I will try again again again...
thanks.
OKOKOK
EQUANCY said:
There is only SPL 2.15 not anymore
I've tried everything but
Results are same.
I've Wm6 before but it was slow and I want to change rom.
and I've read to threads for how to.
I had earlier IPL 1.0 only that but rom was G4 version.
and it was very slowly.
and I've upgraded spl to 2.20
but after this upgrade I can nothing to upgrade
only Qtek's 2.20.7.34_2.20.7114_02.19.21 rom.
I've upgraded/installed Hardspl ( GSM version appears on bootscreen and HTC logo but still waiting )
And after this upgrade.
I did jumpspl too but...
every things same.
I will try again again again...
thanks.
Click to expand...
Click to collapse
1. HARDspl OK,
2. then copy jumpSPL to the ROOT DIRECTORY OF PROPHET, NOT WINDOWS FOLDER,
3. UNPLUG PROPHET FROM PC,
4. RUN SPL.LNK IN THE PHROPHET,
5. PROPHET WILL WHITE SCREEN,
6. THEN PLUG usb TO A RESTARTED PC,
7. RUU UGPGRADE NEW ROM,
SHOULD WORK.....
dioxda2 said:
1. HARDspl OK,
2. then copy jumpSPL to the ROOT DIRECTORY OF PROPHET, NOT WINDOWS FOLDER,
3. UNPLUG PROPHET FROM PC,
4. RUN SPL.LNK IN THE PHROPHET,
5. PROPHET WILL WHITE SCREEN,
6. THEN PLUG usb TO A RESTARTED PC,
7. RUU UGPGRADE NEW ROM,
SHOULD WORK.....
Click to expand...
Click to collapse
Successfully done
Thanks
I have a jasjam
i was upgrading it using the telstra WM6 rom.
during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
it the first splash screen it shows no gsm
it only shows the bootloader menu
IPL 1.04
SPL 2.03
i read the wiki on how to unbrick a bricked hermes but there is no sulotion
plzzzzzzzz
anyone can help me??????
koorosh_bsboys said:
I have a jasjam
i was upgrading it using the telstra WM6 rom.
during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
it the first splash screen it shows no gsm
it only shows the bootloader menu
IPL 1.04
SPL 2.03
i read the wiki on how to unbrick a bricked hermes but there is no sulotion
plzzzzzzzz
anyone can help me??????
Click to expand...
Click to collapse
Did you also read the wiki to see how to install hardspl to protect your device BEFORE flashing ?(here: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )? Are you using Olipro hardspl?
Try to use the SDCARD method (Format a sdcard in FAT32. Copy the nbh file on it and rename it HERMIMG.NBH. Insert the card and HR : OK/POWER/Soft reset. Follow the instructions)
i tested that but didn't help
does anybody have any suggestion??
Try solution to reeboot ( sometimes helps)
1. get out SIM and SD card
get mtty http://forum.xda-developers.com/download.php?id=9864
2. Make BL mode on Hermes
2a on PC ActiveSync - coonection properties untick allow to connect by USB
3. start mtty on PC , choose USB and enter.
4. next enter.
5. type set 14 and enter
6. type task 8 and enter
OS have to boot if no go to 7
7. enter
8 type set 16 and enter
9. type task 8 and enter
Hope that will boot
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Pretty much all the info on unbricking is in this table by Pof. If this doesn't sort you out then you're have to send it off to imeicheck etc for repair.
The history so far
I have bricked my jasjam while updating to telstra wm6
I have not super CID my device before upgrading to telstra wm6
Now my device freezed at second splash screen
IPL 1.04
SPL 2.03
NO GSM
when i used the info 6 command on mtty it says NO CID
i can not upgrade my device from SD CARD (memory stick)
i used these command on MTTY.exe but no improvement
set 14
task 8
set 16
task 8
when i tried to rom upgrade using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
any suggestions????
I hope you understand this, Basically if
1. You have a "No GSM"
2. Your CID is corrupted
3. Your OS has no KITL mode
4. You didn't use HARDSPL...
Then your phone is screwed, and you need to buy a new one or send it to repair.
Hope you have better luck with your next phone. (you seem to be collecting bricked phones!)
Wam7 said:
4. You didn't use HARDSPL...
Click to expand...
Click to collapse
That's the BIGGEST mistake u ever made with ur Jasjam, bro
try to send to repair centre, if repair cost is too much. Than u have to decide try but new gadget. Kaiser looks flirt to me
yep im glad i waited to upgrade from the proper wm5 to the proper wm6
st3v3 said:
yep im glad i waited to upgrade from the proper wm5 to the proper wm6
Click to expand...
Click to collapse
Did u mean, u stay at proper WM5 or already Flash to WM6 ?
I think everything is save IF we read carefully the disclaimer from the author
ermenzegna said:
Did u mean, u stay at proper WM5 or already Flash to WM6 ?
I think everything is save IF we read carefully the disclaimer from the author
Click to expand...
Click to collapse
The offical I-mate telstra Jasjam rom for WM6 came out recently previous to that i just kept the original WM5 rom that it came with much to the dismay of my peers, actually considered it a few times but decided against it till the official rom came out.
yeah if you follow the instructions for the WM6 rom you use it should be ok however the "Murphys law" of programming tends to suggest there will always be an error that they dont allow for.
st3v3 said:
The offical I-mate telstra Jasjam rom for WM6 came out recently previous to that i just kept the original WM5 rom that it came with much to the dismay of my peers, actually considered it a few times but decided against it till the official rom came out.
yeah if you follow the instructions for the WM6 rom you use it should be ok however the "Murphys law" of programming tends to suggest there will always be an error that they dont allow for.
Click to expand...
Click to collapse
This has NOTHING to do with only using official Roms! One has pretty much the same chance of bricking their phone evening using an official WM6 as a cooked variant from Schaps et al..
Simply put if you don't use HardSPL then you're asking for trouble no matter what the ROM. You should also use the MicroSD wherever possible as it is much more reliable.
imei check use jtag to fix this
imei check use jtag to fix this ,CAn we use jtag to fix this in hermes. need help to resovle spl 2.03 cid locked no gsm.
Hello everybody.
I had installed "TouchFLO Charmer WM6_GER ver. 2.8 BETA by mschmitz" over an WM5 T-Mobile MDA compact II (Charmer) and everything worked great.
see link: http://forum.xda-developers.com/showthread.php?t=331142
Now i cooked my own ROM (Charmer WM6) with some improvements and correct working German Input methods.
see Link: http://forum.xda-developers.com/showthread.php?p=2075053#post2075053
As there are several "how-to" here but all are spread around this forum, i will try to give a checklist how you probably not kill your device.
Print this checklist and search the forum for the how-to's.
Prerequisitions:
If something goes wrong, be sure to have a ROM of your Phoneprovider (e.g. T-Mobile WM 5 AKU 2.2 for a T-Mobile device).
If you sdo not have an original ROM, you can use this one to flash back to WM5 (i used this, do not worry that it is english): http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe
Backup your data! All will be lost after upgrading, or if anything goes wrong. You can use Sprite Backup (the only tool that allows upgrading from different WM versions - eg. from WM5 to WM6 - but you wil loose SMS. Use PPCPIMBackup Freeware to backup SMS).
Always use the corrrect ROM (do not use e.g. a MDA III ROM on an MDA II)
I also recommend to delete your Active Sync Partnership after upgrade (Active Sync/File/Delete Mobile Device) and let Active Sync setup a new one (otherwise you may have problems with File sync, sometimes an error pops up).
If you have problems to sync with outlook, it might be a problem with the restored data of SPRITE BACKUP as WM5 has a different database than WM6.
In case you geet an error "Error 8007000e" or similar do the following:
1) Hard Reset
2) Do NOT connect to Active Sync !!!
3) Restore your personal data (If you use Sprite backup select Merge, Level 1 but do NOT select "Migration Data" whern you get the filetree)
4) On your PocketPC start the program "Active Sync" (still NOT connected to PC)!
5) Go to Menu/Options and DELETE the partnership (e.g. "Windows PC").
All Syncroniced data will be deleted on the PocketPC (Contacts, Appointments, etc..), but they are still available in OUTLOOK on your PC.
6) Thereafter delete your Partnership also on the PC (Active Sync - File/elete Mobile Device).
7) Now connect your PocketPC to the Desktop PC and the Outlook data will be syncronized again without error.
You can try to start at point 4) maybe you do not need a hardreset/backup again, try....
After upgrading you should always delete the partnerships....
-------------------------------------------------------------------------------------------
Now the upgrading steps. Make sure to check them all!
1) Unlock your device (CID and SIM). You have to CID unlock your device, or otherwise you cannot install a ROM that is e.g. not T-Mobile on an T-Mobile MDA.
How?
First of all you have to check what device (G3 or G4) and what Bootloaderversion (IPL/SPL) 1.x or > 2.x you have.
SOFT reset your device and note the red numbers that come.
If you have something like
IPL: 1.12 (or 1.12.000)
SPL 1.12.0000
you have an G3 device.
If IPL or SPL ends with 1 (e.g. 1.12.0001), you have an G4 device.
(0 is G3, 1 is G4)
Now check the first number.
1.12.xx is an Bootloader version 1 and 2.12.xx is 2, and so on.
I had an G3/Bootloader V1.x device, so I CANNOT say if it works for other devices.
For a G3 device you have to use Lockiwiz2b to SIM/CID unlock your device (http://forum.xda-developers.com/showthread.php?t=249474).
For a G4 device you have to use Lockiwiz3 to SIM/CID unlock (dont know if it works)
Its easier to unlock an 1.xx. device, so unlock before upgrading (even with an official ROM)
You will NOT loose your data as no HARD reset is necessary. Lockiwiz will not harm your system (if you do the right thing).
2) Now that you have CID unlocked your device, check your Bootloader Version. WM6 can only be installed with an V2 Bootloader (IPL/SPL 2.x.xxx) or higher!!.
So if you have e.g. IPL/SPL 1.12.xx, you first have to upgrade your device with a more recent WM5. I installed T-Mobile WM5 AKU 2.2 and thereafter i had 2.20.xx
3) WM6 cannot be installed over WM6 !!!
If you allready have a WM6 on your Charmer, DOWNGRADE to WM5, thereafter install the new or updated WM6!
4) Install ROM and enjoy.
If soething went wrong, you can save your device by going to Bootloader mode (push and hold camera button and reset with stylus. When you see the 3 colored Screen, release Camera Button. Then you are in bootloader mode and you can flash the original ROM vie your PC and ActiveSync (thats why you should have a WM5 ROM by the hand)
Summary:
1) Check what device you have (G3/G4)
2) Check what Bootloader Version you have (1.xx.xx or > 2.xx.xx)
3) Unlock CID (and SIM) with Lockiwiz02 (G3) or Lockiwiz03 (G4)
If this did not work, STOP here and forget it, nothing is lost until here! If your device is not CID unlocked you will kill your device with a "non vendor" ROM
4) If your bootloader (IPL/SIP) is 1.xx.xx, first upgrade to 2.xx.xx via an official WM5 ROM upgrade (or check XDA-Developers ROMs), otherwise device is dead
5) If you allready have an WM6 on your device, downgrade to WM5 first!
6) Install WM6 and enjoy.
Regards
Ridingshark
You dont need to CID unlock the device to upgrade to WM6. In fact, CID unlocking works only on 1.xx bootloader, and once you've bought a device with 2.xx, you can't go back.
That's why, instead of cid unlocking, you can just use NO_ID RUU, which bypasses checking the VendorID in the flashing process. You can find it here: http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Other than that, its a great thread. Making it sticky.
"WM6 can only be installed with an V2 Bootloader (IPL/SPL 2.x.xxx)!!."
Add: WM6 can be installed with an V3 Bootloader (IPL/SPL 3.x.xxx also
tuecan said:
"WM6 can only be installed with an V2 Bootloader (IPL/SPL 2.x.xxx)!!."
Add: WM6 can be installed with an V3 Bootloader (IPL/SPL 3.x.xxx also
Click to expand...
Click to collapse
Thanks, i changed it to V2.xx or higher (thats what i meant).
Tahnks also to vlodeck for the hind how to with V2.xx devices.
As i said, i can only tell you how it worked for me (Version 1.xx)
Regards R
Where can I find Lockiwiz3 to download?
I recommend lokiwiz2b instead of 3.
http://forum.xda-developers.com/showthread.php?t=249474
A FAQ for flashing vlodeck´s ROM, can you Download here
It is in English and German language with pictures
Can I Upgrade My BenQ P50 which is based on WM2003 to WM5/6?
Can I Upgrade My BenQ P50 which is based on WM2003 to WM5/6?
Can Anybody help out me with this fact or give me some information you know.plz.......
vlodeck said:
You dont need to CID unlock the device to upgrade to WM6. In fact, CID unlocking works only on 1.xx bootloader, and once you've bought a device with 2.xx, you can't go back.
That's why, instead of cid unlocking, you can just use NO_ID RUU, which bypasses checking the VendorID in the flashing process. You can find it here: http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Other than that, its a great thread. Making it sticky.
Click to expand...
Click to collapse
I would like to do it this way but I don't know how get nk.nbf for Charmer_Touch_ver._2.1 . Any help? Thank you in advance...
Your thread is very nice and help me a lot
Can you help me to upgrade bootloader from 1 to 2
Thank you very match in advance...
amoor1 said:
Your thread is very nice and help me a lot
Can you help me to upgrade bootloader from 1 to 2
Thank you very match in advance...
Click to expand...
Click to collapse
Hello amoor.
I also had Bootloader version 1 and simply used the official AKU 2.0 upgrade from T-Mobile from their homepage.
Thereafter it was Bootloader Version 2.
If you do not have an original ROM, you can use this WM5 (Do not worry that it is in english): http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe.
Thereafter you can upgrade to WM6.
Regards R
hey, is there a known problem with the rar archive? i always get a crc error when i want to extract the os.nb file using "wm6" as pass
Thanks a lot! It works!
... I just upgraded my Charmer's ROM following your instructions. Perfect!http://forum.xda-developers.com/images/smilies/smile.gif
vlodeck said:
That's why, instead of cid unlocking, you can just use NO_ID RUU, which bypasses checking the VendorID in the flashing process. You can find it here: http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Click to expand...
Click to collapse
this link doesn't work anymore !! please upload it somewhere else
HTC Charmer noid
HTC Charmer noid
Hello,
I have WM6 to installt on my mda compact 2. How bekome I the language in German? Under regional Settings I Have German Others, but the language ist in english.
Thank you for your Answer.
The Menue is in english but the date was in german.??
Why don't you just install a German ROM by Ridingshark or Cyberdel. Then it will be German.
30.53 MB of storage -> OK - after UNhide -> ActiveSync Problem
Hello,
yes it works!!!! 30 MB storage - perfekt - Thank you.
Bevor UNhide 14 MB storage - but ActiveSync works perfect
After UNhide 30 MB storage - Active Sync dosen´t sync!!
Bevor and after unhide the same ROM (WM ROM 6.5 German (CTRLPDA))
all programs work fine BUT SYNC with ActiveSync dosen´t work.
ActiveSync tells me NO MEMORY on device?!?!? I can not sync any caleder or contacts!
Why?
Sorry for my bad english!!!
Greetings from Germany
seit1999
Who is CTRLPDA? Is it a forum member? We can't help you supporting ROMs not made in the forum cause we don't know the base then.
And what did you unhide? The extROM or what?
Hello,
I will start with my story: I have a qtek S200 and i have make a mistake i think? a friend off my set that i cane use every rom for your phone. So i have putt this a Vincent rom on it. (that's the only thing i know)
Now i want a new rom but, every Rom for a Prophet that i tray on my S200 stops by the Red/Green/Blue screen.
Can some wane help me to get a working Rom for me or a fix for this problem.
Thanks
(And sorry for the bad English)
i think it is in this topic right? (http://forum.xda-developers.com/showthread.php?t=353547)
the problem. You haven't HARDSPL your Device.
Now, go to bootloader mode and flash PDAVIETTemp ,which can be found here.
PDAVIET TEMP
and HARDSPL your Device.
once you HARDSPL your device. SPL information should be 2.G4.4PDA for PPC G4 or 2.G3.4PDA for PPC G3.
Read WIKI. What is SPL. And how to go to bootloader mode.
Thanks
Hello varanusvincent,
So if i'm right my device was not ready jet for WM6? En after your Prophet_Temp i cane load every Rom 6 in it? I'm right?
Tanks
Edit: I have tray your Temp but i won't work. is there another way to hardSPL my device?
For the second time i have load te Rom in the image stay still at 74% cane i break the operation? And how do i get te boot screan back after a abord?
Smattie said:
Hello,
I will start with my story: I have a qtek S200 and i have make a mistake i think? a friend off my set that i cane use every rom for your phone. So i have putt this a Vincent rom on it. (that's the only thing i know)
Now i want a new rom but, every Rom for a Prophet that i tray on my S200 stops by the Red/Green/Blue screen.
Can some wane help me to get a working Rom for me or a fix for this problem.
Thanks
(And sorry for the bad English)
i think it is in this topic right? (http://forum.xda-developers.com/showthread.php?t=353547)
Click to expand...
Click to collapse
You may try
Just a question: I have still Red/Green/Blue?
My IPL 2.21.0001
SPL 2.20.0001
Still i cane not update?
Smattie said:
Just a question: I have still Red/Green/Blue?
My IPL 2.21.0001
SPL 2.20.0001
Still i cane not update?
Click to expand...
Click to collapse
1. yes, can still update,
2. FORCE BOOLOADER MANUALLY, (very important )
3. Flash NVID for Prophet
4. after restart and activesync,
5. use my Lazy_tool to flash any rom you like....
Enjoy....
Sorry, i'm busy for 8 hours with this ..... phone and it's very hard for me to dot it wright.
So how do i get in "FORCE BOOLOADER MANUALLY" and what do you mean by "Flash NVID for Prophet"
(i'm sorry for all the questions but if read all the Wiki's and guide's but it still not working)
I hope you cane explaine it to me
Smattie said:
Sorry, i'm busy for 8 hours with this ..... phone and it's very hard for me to dot it wright.
So how do i get in "FORCE BOOLOADER MANUALLY" and what do you mean by "Flash NVID for Prophet"
(i'm sorry for all the questions but if read all the Wiki's and guide's but it still not working)
I hope you cane explaine it to me
Click to expand...
Click to collapse
Have you read wiki for prophet?
Here are how to enter bootloadermode
PDA Viet Temp is just to make you back to WM5 no vendor.
To hardspl your device. Read here.
You can HARDSPL your device. Or use lazytool from youzi. Posted from dioxda2.
Lazytool is using softspl.
varanusvincent said:
Have you read wiki for prophet?
Here are how to enter bootloadermode
PDA Viet Temp is just to make you back to WM5 no vendor.
To hardspl your device. Read here.
You can HARDSPL your device. Or use lazytool from youzi. Posted from dioxda2.
Lazytool is using softspl.
Click to expand...
Click to collapse
Hey smattie,
from the wiki, there is a sentence missing after "To enter bootloader, you need to hold the comm manager button and soft reset."
that is " then release the stylus and keep pressing the comm. button until you see the bootloader screen"
Dear VaranusVincent,
Lazy_Tool is a modified version from Youzii's Chinese version, I had that named "LAZY" because I am ~~~~~~~
Hello varanusvincent and dioxda2,
Very tanks for the good explenations and tips. i want to tank you guys for that.
Just another question the SPL is now 2.G4.4PDA cane i run every rom now ore must i do it with a tool?
Smattie said:
Hello varanusvincent and dioxda2,
Very tanks for the good explenations and tips. i want to tank you guys for that.
Just another question the SPL is now 2.G4.4PDA cane i run every rom now ore must i do it with a tool?
Click to expand...
Click to collapse
Don't worry, both way can do.
1. Flash with the tool included in your favorite rom package.
2. or change the nk.nbf in the Lazy_Tool will do ,too.
enjoy~~~
imate jamin boot loader problem
please help me my imate jamin after upgrade shows red green and blue colour iam not able to enter boot loader by pressing com manager and reset button please help
josepgreg said:
please help me my imate jamin after upgrade shows red green and blue colour iam not able to enter boot loader by pressing com manager and reset button please help
Click to expand...
Click to collapse
READ WORD BY WORD~~~~~
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
HELP
Hai My Phone Shows 3 Colours And Ipl &spl Nos What Sould We Do
josepgreg said:
Hai My Phone Shows 3 Colours And Ipl &spl Nos What Sould We Do
Click to expand...
Click to collapse
He josep,
Have you this whole topic? You must load the bootloader your self. And what this have you trayed?