i have jasjam with rom 1.20 ipl-1.04 spl-2.10.olipro
its runing no gsm and when you go to the device information there is no radio version and no extrom and no imei the problem is the phone is out of use please help.
this may help
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
Related
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!
Hi Guys,
I need to downgrade my phone as well for warranty purposes. Unfortunately Mrvanx's guide is offline at present. Can any one of you give me some detail on how to do this and what files will be needed. What I have found is teh google cached version of his guide, which gives me few details but not all.
I am assuming that I need to get back to orginal rom/radio/spl and bootloader. Or in short to be able to send it back for warranty. I do have a new Rogers phone if that can be of any help.
Following is the info about the two phones. If someone from rogers has done this before and can tell me the minimum required that is if I do not need to downgrade radio, spl etc then please advise.
It is from Rogers and currently my boot loader screen says following:
HERM200
IPL-1.04
HERM200
SPL-2.10.Olipro
Under Device Information:
ROM version: FARIA.R-32
ROM date: 11/06/07
Radio version 1.54.07.00
Protocol Version 32.86u.7020.23H
ExtROM version: BIGSTORAGE
My replacement Rogers Phone has following:
HERM200
IPL-1.01
HERM200
SPL-1.11
Under Device Information:
ROM version: 1.34.631.14
ROM date: 04/17/07
Radio version 1.42.00.00
Protocol Version 32.75.7020.18H
Guys this is sort of lastminute for me and I will really appreciate if some can give me some answer on at least the possibility of this process.
Thanks
B.
Can some one please help me, I have searched many threads and they all point to MRVANX guide which is not online right now.
Please!!!!
bharatiya said:
Can some one please help me, I have searched many threads and they all point to MRVANX guide which is not online right now.
Please!!!!
Click to expand...
Click to collapse
Please help.
dear friends,
I have a HTC with japanese language. and I wnat to upload a wwe rom.because the rom is japanese. I downloaded upgrading rom RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10 _108_Ship.exe
but can not upload it, allways geting error [294], pls I need urgent to converet this device into wwe rom. any help just urgent need.
regards
phone info:
HTC HERM200 (X01HT) SOFTBANK
ROM 1.33.761.9
DATE 07/05/07
RATIO 1.46.00.10
IPL-1.01
SPL-2.03
I played with it but now in bootloader mode SPL shows 1.11
I can not do hard-SPL too at all
You needed to do some reading about the softbank, these are a major problem to unlock and upgrade depending on what version you have. In all likelyhood you have bricked your Hermes.
Do some research to see but most people don't like to give advice on the softbanks as no one likes to be responsible for the death of another persons Hermes....
I already read all the forum but could not find any solution, many document and post read about softbank, but never could upload WWE rom
hope someone will explain a proper way..
regards..
Hi Guys,
I have a WIZA200 (Telstra Australia Version) with ipl 2.21.0001 & spl 2.21.olip on it.
I need to upgrade to WM6 and need to know what file I need to get and english version that is stable.
Please help!!!
Try this out .. I am using it since a month without any problem.
forum.xda-developers.com/showthread.php?t=494802
Rock On
my ome is JASJAM form Emirat
and it is now have NO GSM and NO IMEI
and MY SPL is 2.10 Olipro
and my IPL is 1.4
and it have windows mobile 5
i want to flash the radio for it i tried all radio version but not sucsess i want to know the best rom that i can donwload for it
and thanks again
[email protected]
Your phone is broken!!!
i also have the same problem and i need help
i also have the same problem and i need help