Hey
I have tried to flash a WM6 rom for my Hurricane.. But as i read i needed a patched ruu for the spl update.. Then i found some patched ruu in the "WM6 for C550" topic and flashed it and now all i get is a white screen! It wont do anything other than showing a white screen.. ! What can i do ? I can't flash anything on it, my computer dosn't recognize the phone anymore.. And by that i do not mean it dosn't recognize it from active sync, it dosn't even see it through usb connection! Phone dosn't even charge..
Have i bricked it ?
can u turn bootloader? if u can, have you done backup?
morek33 said:
can u turn bootloader? if u can, have you done backup?
Click to expand...
Click to collapse
i can't get to bootloader ! Unless its something iam doing wrong? If i plug the usb cable while holding camera button i still get a white screen ..
u can't get to tricolour screen? that's a problem. i guess u flash a wrong spl.
u can press the power button while holding camera button , then press "0",and plug the usb cable.
run mtty ,if there is a usb connection,you can flash the os. then restart.
u will get a white screen again,but the system can get connection with ruu.
now flash the right spl.
wannaknow said:
u can't get to tricolour screen? that's a problem. i guess u flash a wrong spl.
u can press the power button while holding camera button , then press "0",and plug the usb cable.
run mtty ,if there is a usb connection,you can flash the os. then restart.
u will get a white screen again,but the system can get connection with ruu.
now flash the right spl.
Click to expand...
Click to collapse
How much do you know about flashing this device? No matter what i do i get the white screen.. Even just a normal turn on gives me the white screen. It dosn't show anything other than this white screen, so if i press 0 nothing happens..
Related
hi my nike stuck on splash screen i tried to flash it by sd &many rom but still dead
u6ariq said:
hi my nike stuck on splash screen i tried to flash it by sd &many rom but still dead
Click to expand...
Click to collapse
plz help me
Push and hold the camera button while starting your device to reach the bootloader menu.
Did you flash a wrong hardspl (for exampel neon on a niki)?
More details on your problem will be helpful!
square2k4 said:
Push and hold the camera button while starting your device to reach the bootloader menu.
Did you flash a wrong hardspl (for exampel neon on a niki)?
More details on your problem will be helpful!
Click to expand...
Click to collapse
i tried to flash it to 6.1 from ce4arab but the cable UN bulged from it
then stuck on htc splash screen
itried to flash it by the original rom but no way to work
by the way thanx for ur interested
To me it sounds like it could be fixed by reflashing indeed.
Ofcourse while it's stuck in the HTC splah, the flashing tool won't find it.
What you need to do is this:
Turn off the phone (remove the back cover, remove the battery and re-insert the battery).
Then make sure it's fully charged (just connect the charger, don't turn it on.
Then (while still off!) press the camera-button (on the side), hold it and also press the power-button. Hold them both until you see a screen with three colored bars and some text.
Then connect the phone to the computer and flash as you usually would.
That should fix it.
nike dead?
buy adidas
funny lol
Sry for bad english, but here is my problem:
After I did the downgrade to stock ROM with SPL, the bootloader wouldn't accept any connection from the USB at all. When I install HSPL again, the phone goes into bootloader, but no USB is found in the bootloader. The USB disconnects from the computer, so the HSPL installation isn't really able to connect after being brought into bootloader. The same happends when I try a stock ROM upgrade from HTC.
After the phones hits the bootloader, after a second or so, a new screen comes up. It says "Loading..." and it just stays there, no contact. Doing a reboot with the small red button works, and brings me back into booting up Windows.
Any idea on how I may install HSPL again?
anno65120 said:
After I did the downgrade to stock ROM with SPL, the bootloader wouldn't accept any connection from the USB at all. When I install HSPL again, the phone goes into bootloader, but no USB is found in the bootloader.
Click to expand...
Click to collapse
are you sure? does the word 'serial' not change to 'USB'?
ignore the pc, doesnt matter that the pc doesnt connect activesync.
The USB disconnects from the computer, so the HSPL installation isn't really able to connect after being brought into bootloader. The same happends when I try a stock ROM upgrade from HTC.
After the phones hits the bootloader, after a second or so, a new screen comes up. It says "Loading..." and it just stays there, no contact. Doing a reboot with the small red button works, and brings me back into booting up Windows.
Any idea on how I may install HSPL again?
Click to expand...
Click to collapse
dont forget that you cant just use ANY stock rom, it must be your phones original stock rom.
Go into bootloader, if 'serial' DOES change to 'USB' run hspl.exe (right click and run as administrator)
The white area doesn't show anything. No serial, no USB, nothing at all.
anno65120 said:
The white area doesn't show anything. No serial, no USB, nothing at all.
Click to expand...
Click to collapse
are you manually entering bootloader? if not, then try entering manually.
(Power off, press and hold vol down, tap and release power)
Is that any different?
When I use the method posted above, I get to the bootloader screen, and then to a white screen showing only "loading...". It¨s the same result as when I am trying to install HSPL, or an official ROM upgrade from HTC There's nothing in the white area of the tricolor bootloader screen, no serial or USB. If there had been something there, the case would have been solved easily, but it's nothing at all, The tricolor screen only shows for a split-second and then it goes further to the loading screen (the screen that shows only "loading").
It seems for me to be impossible to solve this
I've just had the same problem but managed to fix it tonight. I'm so happy, thought I'd bricked it.
1. Remove any SD card. Possibly you have a "LEOIMG.nbh" file on it that the bootloader is trying to load and getting stuck.
2. Now try manually loading the bootloader. (Disconnect the battery. Connect the battery. Hold volume down & press power.)
3. Hopefully you now have the bootloader on. Plug into the USB on the motherboard of your computer at the back.
4. You should see USB on bootloader. Run HSPL in admin mode (right click the HSPL.exe to run as admin).
Hopefully that works for you.
anno65120 said:
When I use the method posted above, I get to the bootloader screen, and then to a white screen showing only "loading...".
Click to expand...
Click to collapse
as red above said, , , you probably have an image on your sd card.
I am having the same problem as above. However, when I connect the USB to my PC, it doesn't change from "Serial" to "USB". I am unable to install HSPL. What do I do?
Zythyr said:
I am having the same problem as above. However, when I connect the USB to my PC, it doesn't change from "Serial" to "USB". I am unable to install HSPL. What do I do?
Click to expand...
Click to collapse
i am having the same problem. please help!!
kunsam said:
i am having the same problem. please help!!
Click to expand...
Click to collapse
And me too as well,,,still no luck after all the suggestions
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/showpost.php?p=6707785&postcount=1 )...but[/url] with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india...
gdsbalaji said:
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/show...count=1)...but with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india...
Click to expand...
Click to collapse
Wow, did you search? There is a thread right below yours with 13 comments for the same problem.
i did search for 2 days and tried the suggesting provided by the users...but nothing seem to work....i just need to get to the bootloader so that i can load a rom and move on to wp7....after task29...somehow hd2 never goes into bootloader screen...tried many times hoping for luck...still trying...
bootloader dont load
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
gdsbalaji said:
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
Click to expand...
Click to collapse
hey. how did you fix it?
mine is totally dead after flashing a non compatible rom, but i can revive it if I can go to bootloader
hanniabdin said:
hey. how did you fix it?
mine is totally dead after flashing a non compatible rom, but i can revive it if I can go to bootloader
Click to expand...
Click to collapse
With some more information, it was easily'r to help you.
Witch HD2 device do you have?
Witch stock ROM did you install?
Can you get access to bootloader?
SOLVED {bootloader dont load}
posted my the solution to my problem here.
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
check it out...
________________________
thank me if this is useful.
kurt-willems said:
With some more information, it was easily'r to help you.
Witch HD2 device do you have?
Witch stock ROM did you install?
Can you get access to bootloader?
Click to expand...
Click to collapse
mine is t mobile hd2
I installed rom 2.01
I cann't got to bootloader and I can't eveing sync it with the windows. the windows just give sound but no sync. even the charging light will not turn on.
Hi.
Just tryed to inst. Android in my HD2 and now it stuck with a white screen with the HTC logo.
Is it any way to fix this or do i just trach it?
I am not an expert but this happened to me once while installing SD android.
I reinstalled the original ROM from the HTC site and restored my phone to factory settings.
I tried another version of android and it worked well (since last September).
Only observation is that lately (last two month) my phone hangs a lot on both systems (droid & win) and overheats a lot and when this happens I need to wait for it to cool down (at least 20 minutes) then it accepts rebooting (I am stating this although I am not sure is it from the droid or just my HW is faulty for other reasons).
I hope this helps
I tryed a NAND install. Now I cant get conection with usb and computer
Maybe you can perform a hard reset with buttons
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
I hope it works
3mo said:
Maybe you can perform a hard reset with buttons
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
I hope it works
Click to expand...
Click to collapse
didnt work hehe still at the white htc logo screen. I migth installed the files the wrong way round?
Can you get to bootloader (3 coloured screen) by turning on the phone whilst holding vol down?
conantroutman said:
Can you get to bootloader (3 coloured screen) by turning on the phone whilst holding vol down?
Click to expand...
Click to collapse
Yes that's about the only thing i can do
Go-Fast said:
Yes that's about the only thing i can do
Click to expand...
Click to collapse
As long as you can get to bootloader its ok
I would start over from the begining.....
Does it still show that you have HSPL installed on bootloader?
If so, reflash the windows 6.5 ROM that you were using before the android flash.
Then follow the steps in this thread.
Hope that helps....
conantroutman said:
As long as you can get to bootloader its ok
I would start over from the begining.....
Does it still show that you have HSPL installed on bootloader?
If so, reflash the windows 6.5 ROM that you were using before the android flash.
Then follow the steps in this thread.
Hope that helps....
Click to expand...
Click to collapse
Thnx I'll try it later and report back
Still cant get my coputer to connect to the phone.
I get to the "red green and blue" screen, and it says
PB01100 HX-BC
SPL-2.00.HSPL 8G XE
0x85
CotullaHSPL 0x40
I'm on win7 SP1
Ok when you enter bootloader (red green blue screen) you should see "Serial" at the bottom..
When you connect to the computer it should change to "USB"
You might not see anything happen on your computer but the word at the bottom of the bootloader should change.
I might be mistaken here but Im pretty sure you need "2.08 HSPL" although your bootloader shows you have HSPL installed its not 2.08. This might be the cause of your original problem.
Once it says "USB" your ready to flash a ROM via USB as usual...
If it stays on "Serial" after a few minutes then try another USB port or computer if possible.
Enter bootloader and run the HSPL tool and choose 2.08HSPL......
Then start the process from the beggining.
Hope that helps.
conantroutman said:
Ok when you enter bootloader (red green blue screen) you should see "Serial" at the bottom..
When you connect to the computer it should change to "USB"
You might not see anything happen on your computer but the word at the bottom of the bootloader should change.
I might be mistaken here but Im pretty sure you need "2.08 HSPL" although your bootloader shows you have HSPL installed its not 2.08. This might be the cause of your original problem.
Once it says "USB" your ready to flash a ROM via USB as usual...
If it stays on "Serial" after a few minutes then try another USB port or computer if possible.
Enter bootloader and run the HSPL tool and choose 2.08HSPL......
Then start the process from the beggining.
Hope that helps.
Click to expand...
Click to collapse
Hah your a babe conantroutman lol thnx
Is this the rigth SPL ?
Not to intrude on conantroutman here but yes you have to have HSPL 2.08 and a 2.15.50.14 or 2.10.50.02 radio for MAGLDR to work. Without the HSPL 2.08 you can not flash MAGLDR and without the proper radio version MAGLDR will not even boot up.
So to answer your question yes the HSPL you have in the picture you posted is the correct HSPL.
Yep as T said, hspl is good, radio is good. Your all set.
That guide for installing android at the top of the thread is pretty damn good and will have you up and running in no time. Let us know how you get on
Sent From My Fingers To Your Face.....
thnx to both of you. I'll post here when done
Crap my call button dont work when I'm in bootloader
When your in the MAGLDR menu?
You may have to flash WM again to test the call button. Or try reflashing MAGLDR, that may help...
Sent From My Fingers To Your Face.....
I guesse it's a lost case so I just installed winmo and runing android from SD card
thnx for the help.
btw!
is there a way to get htc sense to work on a huawei u8800 or x5?
Hmmm its very weird because if your call button works in WM then it should work in MAGLDR....
While updating a new Xperia U to ICS the PCC had an error while flashing the new firmware. Now the screen lights up, the sony logo is shown for ~3-5 seconds and then it reboots.
After that I have been unable to get it recognized again by either PCC/SUS or flash tool.
I also checked my log files in Linux and no device appears.
I've tried 3 different machines (2x Windows 8, 1x Win 7), multiple USB ports. Also leaving the battery out for ~30 mins didn't change the behavior.
The green light for download mode comes on, but after about 5 seconds the light goes out and it goes into the boot loop again.
So by now I believe the device needs to be sent in, but maybe some one has a few more things I can try.
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
No response, I've tried holding all three buttons for a minute, but it doesn't vibrate after turning on. The only way I can turn it off is by removing the battery.
Min3r said:
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
Click to expand...
Click to collapse
I tried that right now, Flashmode and Fastboot drivers are installed. Flash tool is ready, device is plugged in with volume down pressed, green light comes on. Nothing is found on the PC, after about 5 seconds the green light turns off and the phone shows the sony logo. Green light also comes on if i simply plug in the usb without volume down pressed. So I'm thinking, the download mode has some how been corrupted?
drsanket_xperia_u said:
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Sorry about that, maybe a moderator can move my topic to the right section.
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
drsanket_xperia_u said:
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Click to expand...
Click to collapse
Exactly what I'm doing and the green light does come on. Except it decides to go into a boot loop after it apperantly boots into download mode but doesn't stay there.
Min3r said:
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
Click to expand...
Click to collapse
That's what I've been fearing. In which case it goes back to the seller in the hope that he will send me a new device.
Moved
Is there any chance of properly reactivating flashmode by using a JTAG?
Cebalrai said:
Is there any chance of properly reactivating flashmode by using a JTAG?
Click to expand...
Click to collapse
Risky business
Jtag. ...used for hard bricked devices n. Seen max to work wid samsung phones only....
Wont recommend u too open up ur xu
Let the service center try first
Sent from my GT-N7000 using Tapatalk 2
Have you manage to recover your phone without taking it to service?
I'm in the exactly same situation... Any help is welcome...
While trying to enter flashmode, green light turns on but after some secs it turns off and sony logo appears on screen. any chance to recover this beautiful brick ?
thanks
After several tries (a lot of...) I manage to enter flashmode and SUS is now reinstalling sony ROM.
Honestly I don´t know how it works this time and not the others but i'm happy with it independently of what happens.
... seems flashtool is detecting ur phone try to flash first the stock kernel and do not wipe everything it shud be in timing though.. onces it is flash charge ur phone in kernel mode (phone is off) then you can flash the stock fw of ur XU.
I bricked my phone
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Click to expand...
Click to collapse
No worries. The phone turns off because it doesn't receive any signal from the PC - many people make the mistake of connecting the device in flashmode first, and then they start the flashtool etc.
Instead, load the flashtool first, go to flashmode, select a complete/full stock ftf for your phone (whichever version you want, but do double check if the ftf has kernel.sin file in it) and press the flash button. Only once you get the pop up with the animation telling you to connect the phone in flash mode, connect the phone in flashmode (volume - button pressed when connecting cable). As soon as you connect the phone, the flashtool will start its magic and your phone won't turn off.
if you can go in cwm wipe system then you will only be stuck on sony logo then use this guide http://www.youtube.com/watch?v=hPPWRXcsz7g.....it will work because this same happened to me and i fixed it with this method!
-------------------------------------------------------------------
press thanks if i helped
-------------------------------------------------------------------
using xperia u
locked bootloader
jb experience v2.1 rom