Anyone have the bell 6800 stock radio 1.37.30? Before I flash my device, I want to know I can flash it back to stock if needed. Doesn't anyone have this radio version or can give me pointers on how I can extract it from my device?
Thanks
Anyone able to help me out?
Yes, it's available. I posted a link in the DCD3.0.1 thread. I'll link it here when I find it.
Update: A step by step I took to install DCD 3.0.0, including links.
http://forum.xda-developers.com/showthread.php?p=2017265&highlight=bell#post2017265
TS
Correct me if I'm wrong, but that Rom update from bell does not update the radio. So even with it, it's still not possible to take the Bell 6800 back to Stock if you update with a newer radio revision.
zipsonic said:
Correct me if I'm wrong, but that Rom update from bell does not update the radio. So even with it, it's still not possible to take the Bell 6800 back to Stock if you update with a newer radio revision.
Click to expand...
Click to collapse
Look at the filename on the link:
http://www.utstarcom.com/pcd/downlo...E_2.13.666.1_RS_1.37.30_BM_1.27_0604_SHIP.exe
For me, the original radio ROM was 1.37.30.
This suggests to me that it includes the radio. As far as I can tell, this is the stock radio and WM6 ROM that comes with the phone from Bell.
Related
As the thread title, does anyone know what the original Orange UK radio was? (The updated one which fixed call quality?)
I am using KevinPwhite's ROM but I still have call quality issues but this ROM uses 0300.76. I like the ROM though so I was going to cook my own Radio in however I have no idea what the original is! Ideally need the answer ASAP because the phone's warranty runs out soon
I am guessing it's 5000.167? Anyone confirm this?
Found it:
build 218765072
software version 5005.0001.76
radio version 5001.0001.76
N ow on to figure out how to remove the radio and replace!
BiG K said:
As the thread title, does anyone know what the original Orange UK radio was? (The updated one which fixed call quality?)
I am using KevinPwhite's ROM but I still have call quality issues but this ROM uses 0300.76. I like the ROM though so I was going to cook my own Radio in however I have no idea what the original is! Ideally need the answer ASAP because the phone's warranty runs out soon
I am guessing it's 5000.167? Anyone confirm this?
Found it:
build 218765072
software version 5005.0001.76
radio version 5001.0001.76
N ow on to figure out how to remove the radio and replace!
Click to expand...
Click to collapse
Your guess is correct, 5001.76 is the radio version used on the orginal Orange ROM.
If you are going to replace the radio, 5001.0300.76 is the best radio to use in the UK if you ask me.
Instructions for changing radio can be found on here using tgtool which is quite straightforward.
Just want to know...
After you updated your device to OTA 4.5.91 (2.3.4) AT&T , is your radio updated too ?
Thanks.
UP ..........
radio
You get the .91 radio also. So yes, new radio. (even if nothing changes, I heard they give it a new number.)
I am running unlocked 4.5.91, flashed via the SBF, and my Baseband version is N_01.77.30P.
Does that sound right, or do I need to flash something newer (for kernel support, etc; my phone is functioning fine with good cell speeds (5.4mbps down, 1mbps up) and gps lock, and although wifi is slow to start it works)?
Thanks!
Yeah, thats the radio you need to be on, its the at&t GingerBread radio.
OP, you can get just the radio .img here if you want to flash it before doing the OTA udpate (assuming you haven't already done this):
http://forum.xda-developers.com/showthread.php?t=1159505
"Very positive comments about this radio from everyone who's flashed. Looks like this is the best yet."
- Ken Pennington
Thanks but already update with Fruit Cakes
http://forum.xda-developers.com/showthread.php?t=1163009
Is anyone having issues with after rooting the Thunderbolt you lose the 4G LTE at the top and stuck with a 1X?
For some reason this is the second Thunderbolt and I'm having the same issues. If anyone can provide some feedback on this is greatly appreciated.
Thanks!
Check baseband. When I rooted mine from some reason it wiped my radio. Also make sure the back cover is on tight.
Did you just gain root, or did you also flash a rom? If you flashed a new rom you might need to find the right radio to work with that specific one. I'm new to this as well but what I've gathered from reading, Gingerbread based roms require gingerbread radios to be flashed as well. I think you need MR2 or newer to run with GB based Roms.
Yeah- if you root your Tbolt and are running froyo (which of course you would be unless you got the ota before it was pulled) and then you flash a GingerBread rom - you also have to flash a new radio. Flashing a rom does not change your radio. You have to flash the radio separate. And a GingerBread rom needs a compatible radio.
The latest radio is from the 2.11.605.3 ota. There is a radio thread in the development section. Sometimes they post the LTE radio and the cdma radio separate so you have to flash them both. You flash them in hboot. Not in cwr.
sorry if you knew all that already.
I bought an unlocked Atrix a while back from amazon and had it shipped to me to latin america (Panama). It ended up being a German O2 version with Froyo and a N_01.95.00R baseband/radio. It's been running great with everything unlocked and TDS ROM, however I've always had that nagging feeling that I should flash to a newer radio firmware.
Would anyone advise against it? More than looking for how to flash a radio (I read about fruitcake), I'm more interested in finding out which radio is it safe flash or which would be the correct one for me to flash. I'm a bit lost on this, since there doesn't appear to be a lot of information on the subject compared to everything else.
Unless you're having problems with your current radio - I'd just leave it alone. If you dont know what you're doing, you'll only break something.
Does anyone if there's going to be issues with running the international 1.29.401.xx ROMs when it comes to firmware? I'm on the shipping firmware pre-OTA, so I don't have the same radio as the 1.29 ROMs, and everything else is different for me too. Is this going to be an issue or should I just go ahead and flash the radio only?