i am using prophet mobile xda neo with wm6 (transform 1)
today all of a sudden the touch screen stop working .. that is, it does not recognize the taps ... i always used protector on it ,after this problem i removed protector ,cleaned screen ,HR mobile ... downgraded it re-flashed it again but the cell is stuck on "TAP ON SCREEN TO SET ,...... " message ....
i am unable to do any thing with it .......
i need your help and suggestion ... please do help me ...........
that's more like a hardware problem. I dont thnk you can fix it with ROM flashing nor it has anything to do with screenprotector on/off. I would suggest that you get it fix (unless you are very comfortable in opening the unit yourself). I'm not sure if this is Prophet specific, but I do read at somewhere that, the connection between the screen and the motherboard are somewhat unreliable.. especially after a bump or so on the phone itself.
thanks a lot .... one more thing .... can i get the information about opening my prophet ..... i will open it .. if i get "how to...." matter on it. thanks in advance.
I wonder around all the forum, but I dont remember having a Prophet manual. However, as prophet is somewhat similar to Magician and Charmer, you may get a hint on how to open a Prophet based on those manuals. There is definately a how-to-open-a-magician PDF somewhere in this forum (which I've used it to open my ex-Charmer) and I know there IS a Charmer service manual somewhere here, where there is a guy offering HTC manuals in his website. Try your luck at the Wiki section, or try googling this forum (i.e. using google to search within this forum).
UPDATE: This is your lucky day. I just did a serch and it seems that
Mike Channon has a collection of links for it. Is this in the Wiki ?!
http://www.modaco.com/HTC-Service-Manuals-Dis-t258716.html
thanks a lot dude ...... i saw the pics too and i can open it (even though the comments are given in russian, it would be more beneficial f it would be written in English ) ... but the second thing (if any one can tell) how i will find those cables which works with touch screen ..... and what exactly i have to do ????? please help me once again ..... i will be thankful to you .........................
i am still wondering ... pls guys help me solving my problem ... i am living in a small township in india and i dont even have any good service center nearby ..... i have to solve it by myself....... pls guide me to solve my problem.......
thanks ..............
Help needed
Mine has done the same thing, I have opened it and found that the connection for the screen appears to be damaged and have ordered a lcd + digitizer from US ebay for about US100 incl postage (from china) which even if it is not the connector should hopefully sort the problem. I used google translater to help with the russian dismantling instructions. I have noticed there is someone who sells the screens here too...
Hi people,
as you can see I'm new to the forum so excuse my lack of knowledge.
I did browse through a little when I had my XDA Exec (HTC Universal) but never posted. I've now bought an Orange SPV M3100 from ebay, and I'd like to unlock the sim lock plus upgrade to Windows Mobile 6 so thought I'd join and learn how to mod my new phone/PDA in time for it's arrival next week so I can use my Three UK sim.
I've had a little look at some threads regarding the unlocking linked from another forum, but the threads I read didn't really mean much to me as I'm unsure of the terminology used in regards to software modding. I'm also unsure of what software I need to communicate with my new phone when I update/unlock it.
Any help would be great! In simple terms if anyone can point me in the right direction to unlock and install Windows Mobile 6 then I'd much appreciate it.
Thanks in advance!
Please look here first: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes the wiki should answer all your questions!
Please Read it thoroughly most people just browse through then come back asking questions when all the answer is there!!!
Brilliant thanks for the link, will have a good read.
OK after browsing forum pages and trying to take in some info to accomplish my goal I just need to double check incase I wreck my phone...
Basicaly all I need to do is unlock my Orange SPV M3100, and would like to install WM6... Are these steps correct?
* I understand that I need to install ACTIVESYNC v4.5, which I've done.
* Then to unlock my mobile I need to download Hermes SIM CID unlock v3a which I've done. Connect my phone, and make sure the green activesync icon appears in the bottom right hand corner of my computer screen. I then run the 'Auto_unlock_v3a.bat' and follow the instructions.
* To flash a rom I need to install Hard SPL v7 which I've downloaded. I assume I run 'RUUWrapper.exe' while my phone is connected via activesync?
* I downloaded the Offical HTC Windows Mobile 6 (HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108) from the link on this forum. To install I guess I just run the .exe file?
If I'm completely wrong then sorry, I'm not trying to be a pain I'm just trying to get my head around the whole process. Also could somebody tell me what a 'radio' is?c Thanks.
there should be a read me .txt file in the sim and cid unlocker.... try reading that if you haent allready
I did have a look last night at one of the 'instruction' text files I think on the SIM CID unlocker, that part of my whole process seems the easiest.
I just want to make sure installing the WM6 update is one correctly for obvious reasons.
Is there an advantage to using a 'cooked' version of WM6 over an official HTC WM6 rom? As it seems many have these custom roms, when I assumed the official would be more stable?
Got this all done in the end, seemed rather easy after I thought it would be some kind of nigtrmare.
I now have an Orange SPV M3100 unlocked, running radio 1.47 and operating on the Dopod official WM6 rom.
All seems well so far!
When I get bored I may have to try some of the cooked roms.
PS... Anyone know where to get some nice themes? I saw a green one somewhere on here (official HTC?).
lol i was in the same boat as you (if you remember) its easy when youve done it you think well wats all the fuss really about....lol
i running a Schaps os really nice esspecially with the sleek touchflo in built
got bored of running offical wm6 rubbish lol
I lasted 1 day with the official Dopod rom, I'm now running the schaps 4.30! Very pleased with it, million times better than the standard official WM6 I had 1st.
...and yeah it's easy peasy flashing new roms, I think it's the terminology that was making me scratch my head with roms, radios etc I didn't know what anything was at first.
Happy now though, just need to find a new case to make my Hermes nice and fresh looking - I hate scratched phones!
dont use the *Suger Cube Method*
same i hate scratched phones...
i tryed the using a suger cube on the orange logo as it says on website this will get rid of the orange logo with out leaving a scratch... It scrached my case like there was no tommoro
so if u find a shop or summet selling them please give me a link lol
thanks
westie
I've seen a couple on ebay for around 30 quid with the HTC logo instead of the horrible Orange branded ones.
If you search for htc hermes housing in titles and descriptions you should see a few on there, some are around 50quid though! Plus most are from Hong Kong so you'd have to wait a week or so to receive the housing.
If you need a guide to housing removal I will post a link on here for you?
southeastblue said:
I've seen a couple on ebay for around 30 quid with the HTC logo instead of the horrible Orange branded ones.
If you search for htc hermes housing in titles and descriptions you should see a few on there, some are around 50quid though! Plus most are from Hong Kong so you'd have to wait a week or so to receive the housing.
If you need a guide to housing removal I will post a link on here for you?
Click to expand...
Click to collapse
Yes please southeastblue van i have that link to show me how to remove housing!
thanks
Here's a pic guide to housing swapping...
Here's a video on Youtube of a guy dismantling his Hermes...
southeastblue said:
Here's a pic guide to housing swapping...
Here's a video on Youtube of a guy dismantling his Hermes...
Click to expand...
Click to collapse
Thanks i will consider it i really do hate the scratches on my case makes it look second hand when it is brand new
It does look hard to do and easy to go wrong...
Has anyone tryed a ipod scratch remover as it is the same silver metal as the ipod metal u find on the back
Thanks alot for the great responce!
I've taken apart a couple of phones before (Nokia 3650 and did an Ericsson w800i case swap on an Ericsson K750i) and taken apart my old laptop which I managed to fix and this doesn't look too hard to just do a housing replacement.
I ordered a plain black housing today (no company logos) which I will fit next week (coming from Hong Kong). Cost me £33 in the end I think, hopefully it fits OK.
My LCD is ok bar one VERY annoying scratch! Think I will leave that alone though until it gets worse, then I may flog the phone as is at the end of the year, or maybe just replace the screen if I feel I wanna keep it. I pretty good at keeping things looking nice though so hopefully the screen won't deteriorate too much.
I'll post a pic of before and after when I've done it and point out any difficulties I had, should be OK though!
Looking forward to having a nice new looking Hermes without the Orange branding!
Just to say, I managed to change my housing only took me about 30 minutes was pretty simple. All I needed was a T6 Torx screw driver, a very small phillips (cross head) screwdriver, and a credit card shaped card to lift away the housing after you've taken the screws out of each bit.
Haven't taken a picture yet but happy with it! Will post one soon!
Westie277 said:
same i hate scratched phones...
i tryed the using a suger cube on the orange logo as it says on website this will get rid of the orange logo with out leaving a scratch... It scrached my case like there was no tommoro
so if u find a shop or summet selling them please give me a link lol
thanks
westie
Click to expand...
Click to collapse
Just add some aceton on a quetip and gently rub it of... the plastic will not take harm... I have done it and it went just fine.
gfreek said:
Please look here first: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes the wiki should answer all your questions!
Please Read it thoroughly most people just browse through then come back asking questions when all the answer is there!!!
Click to expand...
Click to collapse
thx with ur help i unlocked spc m3100 grt
Hello all,
I'm wondering if anyone knows where I could find a disassembly guide for the Nike. I have a Nike that no longer responds to input on the digitizer, so I'd like to open it up and investigate, but I'd like to follow a guide if one is available so I don't damage anything in the process. If anyone knows of a take apart guide, it'd be really helpful. Thanks!
Xeno
http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/
hello to all
suddenly i cracked screen on my g520t huawei bought from china..good phone actually i think!
but now i didnt find anywhere the digitizer for this model
please help me!where can i find it the digitizer?
thanks to all
p.s
i upload picture of mine so you can take a look
Because I have same problem with the FM antenna and I don’t take any signal, I managed to find the service manual and I like to share it with you.
It has all the exploited view of the board and explains a lot of thing about the chips, even the smallest parts of the board. Can help you find the problem, as I find my own.
And if someone have the abilities to make a module for the IRRC this can help I think.
At first need a little practice but is not difficult to understand the diagrams.
link from onedrive:
https://1drv.ms/b/s!Aspcl1kA_XyilklOlKhg4jQjBX54
Link for the NFC chip module by NXP. It can help with any problem related to nfc :
http://www.nxp.com/documents/application_note/AN11690.pdf
This is a very interesting document.
(I think you are from Greece, right? If that is true, then you can contact me via PM in Greek)