Related
The TP2 relies on much more touch-screen action than previous T-Mobile HTC devices, e.g. Wing. I am trying to find the pros/cons of using a screen protector for the TP2, but so far, not finding much. Is a screen protector really that important for a TP2? I am ok with not using one, but if one is necessary, can anyone tell me why? I wonder if a screen protector is more of a personal choice than a technical necessity...
I find a screen protector is more of personal preference, i use it for peice of mind so i dont have to be extra careful when using my screen and also when i play music on my tp2 i put it facedown as the speakers are on the back and i have done that before on a previous phone and scratched the screen as there was dirt on the table. also if you put it in your pocket without its cover and you forget about coins or keys in there, you can say goodbye to your nice shiny screen. So i know if the screen ever gets scratched i just peel off the protector ansd put a new one on.
fibrou said:
The TP2 relies on much more touch-screen action than previous T-Mobile HTC devices, e.g. Wing. I am trying to find the pros/cons of using a screen protector for the TP2, but so far, not finding much. Is a screen protector really that important for a TP2? I am ok with not using one, but if one is necessary, can anyone tell me why? I wonder if a screen protector is more of a personal choice than a technical necessity...
Click to expand...
Click to collapse
I've had my TP2 for about three months now and i've not used a screen protector. I'm quite carefull with the device and i use the pouch every time i put it in a pocket.
I'd like a matte screen protector because fingerprints annoy me to no end, waiting on boxwave to make one because when I had the mogul I used those and they were awesome... but uhm yeah I don't think it's necessary if you're careful with it. Most people I know with the iphone don't use one, and the screen seems similar. There's always that chance you leave you phone in your lap and get up and then BANG (yeah that definitely just happened to my Mogul last week) so I keep a screen protector on just in case. Performance wise, I don't notice it being less responsive when I use the protector, but then again I haven't used it without one much... Isn't there a CAB somewhere to boost touch sensitivity? Wonder if it will work on this...
You want to try the full body shield by zagg they are based in utah where i am from and their crap is the best quality and lifetime warranty
The Zagg one is still being developed, I wonder if the bodyguardz one is just as good...
Brando Screen Protector
I ordered the Brando Screen Protector however i noticed TMO TP2 is different from the other ones being sold. I wonder if anyone has been able to make it the Brando Screen protector work with the TMO TP2.
Product Code: MUCSP041200 for the Touch Pro 2
mobile.brando.com
I'm using the stock screen protector that comes with the tmo version. It was kind of hard to fit on the screen because it is so perfectly cut to the size of the screen and plastic all the way around the buttons and earpiece. It's been fine so far, I ordered a couple off ebay when I got the phone but I think I'm gonna just keep the stock one on there.
Clearprotector uses the same "stuff" as Zagg and they have a T-Mobile TP2 version.
Genesis3 said:
Clearprotector uses the same "stuff" as Zagg and they have a T-Mobile TP2 version.
Click to expand...
Click to collapse
I ordered one and I didn't like the fit. It didn't go all the way to the edges. The top and bottom were too short.
I stuck the bundled one back one since it has a perfect fit. Only problem I have is I somehow made to tiny creases/bumps which is causing to small air bubbles on the edge.
I would not use a device like this without a good screen protector. I used to not care until I got a scratch on the screen protector of my last phone from an unexpected drop and scrape. It would have ruined my screen.
The stock screen protector is very good, it just takes a surgon to put it on because it is laser precise and perfectly cut to the screen. I had to use a razor blade to trim about 1 to 2mm off the left edge to get rid of an air pocket that was resting on about a 1mm lip. (I don't suggest trying it if you don't have a steady hand)
But I'm looking at a full body screen protector to put on next. I ordered a rubber snap on cover, but I don't want to ruin the look and feel of the device. And the phone is big enough already - don't want to make it more bulky. I've been seeing one on ebay saying that it's used to coat helicoptor blades and has a lifetime warranty and all that. Just waiting for someone to order one and review it.
phonepunisher said:
I ordered the Brando Screen Protector however i noticed TMO TP2 is different from the other ones being sold. I wonder if anyone has been able to make it the Brando Screen protector work with the TMO TP2.
Product Code: MUCSP041200 for the Touch Pro 2
mobile.brando.com
Click to expand...
Click to collapse
I also got this screen protector from Brando (same model as yours, as far as I can tell) for my T-Mo TP2...and it doesn't quite fit properly -- it's obviously made for the international/original version with the curved chrome trim on the front. That is, it fits on the phone, but the top and bottom of the front outside the screen aren't covered. And I had to trim out the ear-speaker hole on the protector a little because apparently the distance between the bottom-buttons and the ear-speaker are different between the intrntnl and the TMo versions.
Still, I'm using it anyway (even though it looks funky) just so I can protect that beautiful screen...but when/if one is specifically made for the TMo TP2 I'll get that one.
Other than not fitting exactly right, I do like the protector clarity and sensitivity, and I was able to apply it without bubbles.
UPDATE:
OK, I see now that I ordered what I thought was the same protector, but I ordered mine from "shop.brando.com", rather than "mobile.brando.com" -- What's the difference -- more than one brando.com site?? And my product code is different. (SUCSP083500 vs MUCSP041200)
Looking again at the shop.brando.com page for the product I ordered -- 10 days after I ordered it and 3 days after I received it -- that while the T-Mobile version is listed under intended "Models" there's also a footnote saying it's not compatible with the T-Mobile version. I don't think that footnote was there when I ordered it.
I wonder if the version sold at the mobile.brando.com site, Product Code MUCSP041200 really fits the T-Mo TP2? If so, I'll go ahead and order one...or 2.
DayDeal sells a diamond surface type screen protector. Anyone try it? Also which one do you all prefer? My Zaggs keeps bubbling on edges due to Trident case, so I'm looking for an alternative.
Sent from my HTC DROID DNA
big70tom said:
DayDeal sells a diamond surface type screen protector. Anyone try it? Also which one do you all prefer? My Zaggs keeps bubbling on edges due to Trident case, so I'm looking for an alternative.
Click to expand...
Click to collapse
Haven't tried their Diamond surface screen protector, but I've had their Glare free Screen Protector on for about a month, and really like it!
It doesn't go edge to edge, it does cover the entire portion of the screen which is active, as well as covering the tactile buttons at the bottom of the screen.
Keeps fingerprints to a minimum (my primary concern), and hasn't come off, in spite of my trying and using numerous different cases.
Also doesn't have a sticky feel to it, it feels very smooth, and has no negative effect on screen response.
Before I order something random from Amazon, I thought I would ask what everyone is using and what you think of it. The only post I found in any of the other threads was someone with a tempered glass screen protector who wasn't happy with the fit.
NAR
well, I have a tempered glass screen protector on it, and I am very happy with it. It is a 100 times beter than any other plastic screenprotector, as it will not scratch easily.
not a robot said:
Before I order something random from Amazon, I thought I would ask what everyone is using and what you think of it. The only post I found in any of the other threads was someone with a tempered glass screen protector who wasn't happy with the fit.
NAR
Click to expand...
Click to collapse
Well... for a screen protector, I found this:
http://www.aliexpress.com/item/NILL...ctor-Film-For-Lenovo-K3-NOTE/32319213616.html
I gave it a chance, even thought I was like "meh, Chinese junk maybe", but today after 4 months, it looks the same! BEST screen protector I ever had.
iPaky case (Gold)
iPaky case from amazon.in
Using this, http://www.aliexpress.com/item/Free..._78_77_80,searchweb201644_0,searchweb201560_9
Fits perfectly but can be found cheaper ofc
freelancer81 said:
iPaky case from amazon.in
Click to expand...
Click to collapse
This case is good but bumper is of plastic which is delicated.
I have tried every thing out there and ended up with everything Nillkin, case and screen
I have the black/gold Ipaky case and a tempered glass screen protector. I like them both.
Does anyone know of a desktop battery charger to charge a spare battery out of the phone?
freelancer81 said:
iPaky case from amazon.in
Click to expand...
Click to collapse
I also have an iPaky case bought from ali express. (Black version in my case)
Build quality is good an the case stays higher than the screen protecting it from falls.
The back is super grippy with a nice pattern.
For a screen protector i use a tempered glass one which is stronger than a normal plastic screen protector and doesn't leave bubbles after being applied.It costs a bit more than ordinary screen protectors but you can get one for as low as 1€ from Aliexpress.
I own two cases, one is a simple one with a transparent black color while the other one has an Audi sportscar drawn on it.
So here is what I got:
Aksberry tempered glass screen protector
Pros:
good fit
Tempered glass does seem very hard
rounded edges don't catch on things (like pockets)
Cons:
seems to reduce sensitivity of touch screen
mine has a flaw that has created a bubble under it. It is on the lower edge, so it doesn't affect its operation, just an annoyance to look at.
Nillkin case
Pros:
good fit
edge extends above screen (and screen protector)
extends above buttons. This also helps prevent accidental button presses (am I the only person who thinks that power button is in exactly the wrong spot?)
Cons:
haven't noticed any
Currently using the iPaky case with the silver frame. I love it. The iPaky cases are one of the best out there. I have also a leather flip cover, it's nice but I don't use it much for whatever reason.
did anyone notice the screen protector sensor hole is on the wrong side?
left which has nothing on it, right is where the sensor is.
damn....
Hi,
My Lenovo glass had broken many times & now it gives problem of sensing. Where should I get to change the glass & how much it cost?
I use a tempered glass protector with a skin I ordered from skins4gadgets. The skin is good enough for my usage.
Hey folks,
what's the most sturdiest transparent case on the currently market?
I basically want to have the protection level of a Pelican Shield or Zizo Bolt (those are iPhone cases, but basically that's the "protection category" I am looking for), while still being able to enjoy the sweet twilight color on the back of my phone.
Does this exist? Any suggestions?
Also looking for the best glass screen protector to go with the case in order to eliminate the possibility of damage to the screen or phone when dropping it.
Check out the cases that UAG sell, I bought a Plyo from Amazon. I don't use a screen protector with mine. https://www.urbanarmorgear.com/collections/p20-pro
Hello.
I went for these pair from Amazon.
Huawei P20 PRO Case, Spigen [Ultra Hybrid] Flexible TPU Hard PC Back All Round Protection Phone Case Cover
gp/product/B07BS765MR/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Spigen Huawei P20 Pro Screen Protector, HD Full Coverage, Edge to Edge Protection
/gp/product/B07CGD26Q7/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The case has some nice notches on the rear to keep the cameras from touching the surface, although the protector is a few mm short and there's a collection of dust between that and the case but very easy to apply.
I'd paste the full link but I can't I'm sure you know what parts missing mind....
Got the UAG Pylo. Expensive as ****, but here's hoping that it will actually provide protection if the worst should happen and the phone drops. Thanks
after much research, I got the Ringke Fusion, eBay item number 323312202335 - has camera protection on the back as the surround sits higher than the lens instead of being flush like most of the others
doesn't cling to the back of the phone too, leaving the twilight colour looking just as it should, unlike the cheap case supplied with the phone
Ok guys I got the Xperia 1 iii after much thought and since I got it after getting the official Sony case and a screen protector I have been through 3 glass screen protectors in like the first couple of weeks and hadn't even droped my phone outside . I put this down to the poor protection from the official Sony case offers. So I purchased the Spigen case that offers the full bumper cover and replaced another Spigen glass screen protector for little under £15 and after putting it on my bed side cabinet last night and getting in the car this morning I noticed the screen protector is broken again .and I haven't even dropped it inside . So I'm down over £100 in the last month or so and geting fed up with trying to find a decent case and screen protector for the Xperia 1 iii
I also look for a good screen protector. Which one can I get on Amazon Italy?
I have read that it is best to avoid the spigen align master.
As a cover I feel great with the Spigen
Spigen case is great. You will not find a suitable screen protector because the edges of the screen are still "curved" thereby not allowing the protector to cover the entire screen edge-to-edge. I gave up on a screen protector for most phones lately due to this fact.
jaseman said:
You will not find a suitable screen protector because the edges of the screen are still "curved" thereby not allowing the protector to cover the entire screen edge-to-edge.
Click to expand...
Click to collapse
I think it depends on what you mean by edge to edge protection. If you mean it covers the entire front, bezels included all the way to phone edges than no there isn't one, though those screen protectors with black borders all around get pretty close. The draw back is that depending on the manufacturer, some of them have black borders covering the edges of the screen more than others, which can be noticeable and annoying.
There are also screen protectors that go slightly beyond the edge of the screen. As in you can see the border between the screen and the bezels right beneath the glass, but that's about it. I consider that screen edge to edge and I have been using that. As you mentioned, since the screen curves ever so slightly at edges, the edge of that screen protector doesn't sit 100% flush on the screen.
Some manufacturers give a kind of transparent filler glue that you can brush in the gap along the edge to fill it up and make it looks seamless instead of a visible air gap. However because it isn't a solid surface, the glass along the edges can crack if you press your screen edge hard enough multiple times, maybe from an intense gaming session. But under normal use, so far it held up.
I don't have recommendations, as I bought them from my local e-commerce site, although they are direct from China, so I'm sure they are there somewhere on Taobao or Aliexpress. I am not sure of which ones are these if I were to search on those platforms, or on your platforms like Amazon.
I use spigen glass and except the first one that broken easily i have no issue.
I bought spigen case but trashed it after a single day..too bulky...i bought a 10 Eur in soft clear silicon off amazon.it (Elyco Cover) Not the best against yellow tint but i smoke then no case will ever be safe from yellow tint.
But this cover is really really thin and don't ruin phone appearance
The spigen cover for iphone 12 pro was good, pretty thin but protective. The one for Xperia 1 III from spigen is really really bad, it protect well but increase the size of the phone in a nasty way
Evil_Sephiroth said:
I use spigen glass and except the first one that broken easily i have no issue.
I bought spigen case but trashed it after a single day..too bulky...i bought a 10 Eur in soft clear silicon off amazon.it (Elyco Cover) Not the best against yellow tint but i smoke then no case will ever be safe from yellow tint.
But this cover is really really thin and don't ruin phone appearance
The spigen cover for iphone 12 pro was good, pretty thin but protective. The one for Xperia 1 III from spigen is really really bad, it protect well but increase the size of the phone in a nasty way
Click to expand...
Click to collapse
Not sure which Spigen case you are talking about but the one I have does not add hardly anything to the feel of the phone. Oh well, to each his own!
jaseman said:
Not sure which Spigen case you are talking about but the one I have does not add hardly anything to the feel of the phone. Oh well, to each his own!
Click to expand...
Click to collapse
The Spigen ultra hybrid (in 2021 It was the only cover for Xperia 1III fine by Spigen)
And compared to the One i use now is sensibly bigger and bulkier, also i found the hard plastic parts in the rear of the cover pretty nasty.
For example on my old Xperia 1 i have the Spigen Crystal liquid cover and if you compare that Spigen cover with the One for X1 III Is pretty clear how the new cover made the phone bulkier.
It's not much, around 1-1.5 mm thicker, but the feeling Is worst, at least for me.
https://us.amazon.com/Spigen-Rugged-Armor-Designed-Xperia/dp/B08V32DGL7/ref=sr_1_2?crid=LVB4LWO43ZWQ&keywords=spigen+rugged+armor+xperia+1+ii&qid=1647539155&sprefix=spigen+rugged+armor+xperia+1+iii%2Cspecialty-aps%2C67&sr=8-2
$12.00 can't be beat!
I really recommend the original cover with stand:
Osłona z podstawką do smartfonu Sony Xperia 1 III | XQZ-CBBCB - Etui - sklep internetowy Sony Centre
XQZCBBCB.ROW : Stylowa osłona z podstawką do smartfonu Xperia 1 III
scentre.pl
It is made of materials that helps heat dissipation and also anti-bacterial.
Maybe it's only a cover and expensive one but I can say it is really a good quality. So I can recommend it.
Spigen cases all the way. Had them since my Nexus 6P.
If you can get up to north Wales tech base they have what they call clear shield it's like that dbrand skin I have it on my Xperia 5 ii only prob is getting there and paying 20 pound of you want I can show pictures of the front and back o also have the like crabon type back cover and also have Duc ducis flip case I alternate between the 2 and go naked sometimes
Here's what I was on about