Related
I would prefer this thread not become a "I am getting XYZ HELP!" thread, because it would be off topic. But I know it runs the risk of that because I would like to talk about the choice of Roms that XV6800 owners have used and the pros and cons of them.
I'm pretty sure I've seen the following GPS enabled ROMS on the verizon phones: (in order of complexity)
1. Original leaked ROM
2. No2Chem's nueROM http://forum.ppcgeeks.com/showthread.php?t=17219
3. DCD's 2.3.2 http://forum.xda-developers.com/showthread.php?t=371314
4. nexvisions's http://forum.xda-developers.com/showthread.php?t=364043
This section is now expanded to include a longer list of relative information needed to prepair for this process:
I've seen the Easy update thread: (This thread flashes the unlocker and radio in a single step using a ROM installation designed ONLY for a Sprint phone. Some believe this is why ppl have the 15 minute delay before aquiring a signal.)
http://forum.ppcgeeks.com/showthread.phpHere ?t=17667
You can see documentation for DCD's update from a Verizon Customer here:
http://forum.xda-developers.com/showpost.php?p=1973238&postcount=536
Here are the stock roms for recovery purposes (Signed and sealed by Verizon -not rips)
http://forum.xda-developers.com/showpost.php?p=1845171&postcount=13
Here is an unlocker: (also includes exit bl; read the .bat file to learn a lot and get some useful CLI commands)
http://forum.ppcgeeks.com/showthread.php?t=9093
Here is the Titan relocker:
http://forum.ppcgeeks.com/showthread.php?p=125160
Radio ROM 3.27.00
http://forum.xda-developers.com/showthread.php?t=362563
"general flashing rule is to start device in bootloader mode first and then flash. Do NOT flash it while it is running WindowsMobile OS."
Here are the generic steps to peform a standard burn from stock (works for some but all numbers should be written down in preparation)
0. WRITE DOWN ALL INFO UNDER ##778
0.1 REMOVE YOUR MicroSD CARD NOW!!!
1. Flash 2.40 unlocker using the Titanunlocker.bat inside the rar file (all files should be extracted to a new directory)
2. Flash DCD 2.3.2 (or preferred rom) different roms will
3. Flash radio 3.27
4. after booting dial a *228 to get the latest programing
That's it. It should be that simple.
If you are stuck, you might just be in the boot loader, use this tool for Verizon phones only to exit the boot loader:
http://forum.ppcgeeks.com/showthread.php?t=9229
Here's how to recover when it is not:
1. Using a PC, format a microSD card to FAT32.
2. Using winrar or an unzipper, extract the *.nbh file from the ROM upgrade .exe.
3. Copy the *.nbh file to the formatted microSD card
4. Rename the file on the microSD card TITAIMG.nbh.
5. Insert the microSD card into the phone and reset into bootloader.
6. The phone will tell you to press the power button to flash the ROM; do so.
Going into bootloader mode: power, camera, reset all at once.
Hard reset: Press the two dot (bottom menu) keys and hit the reset button, release all after two seconds. (RUMOR: Leaving the SD card in the phone may result in the SD card content being wiped. I don't care to test the rumor.)
I've read loads of threads tonight. My problem is that most of this stuff is slanted to Sprint stuff. I'm creating this as a central place for Verizon update facts. I'd love to hear if things work or if things don't work.
I'm considering flashing my phone tomorrow, (didn't happen yet by choice) but will also be travelling starting that night. Obviously the smart thing to do would be do go without GPS on my adventures, but it would be soo cool to have it working for SxSW just for the geek factor. And that calls to me.
So, here are some of my myths and mythunderstandings:
1. Every Verizon customer who updates their radio has to call into verizon to re-authenticate their phone. But Verizon is pretty cool about that even if you say you were flashing your phone.
2. This is true even if you follow the steps in the easy guide and write everything down it tells you to write down because Verizon uses a GUID generated by the radio rom when it is used for the first time on your phone. Not all areas as of today not every area does this but most and soon all will. It depends upon where you are in their upgrade chains.
3. If you install Radio 3.27, you're a screwed verizon customer because resets (hard and soft) and power ons (?????) will no longer aquire a signal right away. You will be waiting for 15 minutes or longer before you can use your phone again and no one has a working solution to this for Verizon customers. This happens to EVERY verizon customer.
4. People have upgraded to the original leaked rom without a problem (and without that delay) and that allowed them to have working phones possibly because of one or all of the following:
a. It is signed by Verizon and you don't have to unlock your phone?
b. MAYBE it doesn't require the radio upgrade???? (FIRST REPLY STATES THE RADIO IS REQUIRED FOR ALL GPS ROMS)
c. Because it was built using only Verizon stuff it is missing whatever incompatible tool the other kitchens have in them????
d. Because it has WM 6.0 and 6.1 hasn't been tested with Verizon????
5. DCD's rom has all of the MS Office software as an installable option whereas No2Chem's excludes it. Don't know if this includes outlook or not.
6. Both of the Kitchens mentioned above will work with Verizon and they have options that allow you to choose Verizon as an install option branding your phone correctly.
So that is upgrading your verizon phone as I understand it. Am I off too far on anything? I've not seen reports of any bricks yet but I know that is always possible.
So who has tried what ROM and to what degree of success?
BrianLayman said:
I would prefer this thread not become a "I am getting XYZ HELP!" thread, because it would be off topic. But I know it runs the risk of that because I would like to talk about the choice of Roms that XV6800 owners have used and the pros and cons of them.
I'm pretty sure I've seen the following GPS enabled ROMS on the verizon phones:
1. Original leaked ROM
2. DCD 2.3.2 with 3.27 Radio upgrade
3. No2Chem
I've also seen the Easy update thread:
http://forum.ppcgeeks.com/showthread.php?t=17667
You can see documentation for DCD's update from a Verizon Customer here:
http://forum.xda-developers.com/showpost.php?p=1973238&postcount=536
I've read loads of threads tonight and my problem is that most of this stuff is slanted to Sprint stuff. I'm creating this as a central place for Verizon update facts. I'd love to hear if things work or if things don't work. I'm considering flashing my phone tomorrow, but will also be travelling starting that night. Obviously the smart thing to do would be do go without GPS on my adventures, but it would be soo cool to have it working for SxSW just for the geek factor and that calls to me.
So, here are some of my myths and mythunderstandings:
1. Everyone Verizon customer has to call into verizon to re-authenticate their phone. But Verizon is pretty cool about that even if you say you were flashing your phone.
2. This is true even if you follow the steps in the easy guide and write everything down it tells you to write down because Verizon uses a GUID generated by the radio rom when it is used for the first time on your phone. Not all areas as of today not every area does this but most and soon all will. It depends upon where you are in their upgrade chains.
3. If you install Radio 3.27, you're a screwed verizon customer because resets (hard and soft) and power ons (?????) will no longer aquire a signal right away. You will be waiting for 15 minutes or longer before you can use your phone again and no one has a working solution to this for Verizon customers. This happens to EVERY verizon customer.
4. People have upgraded to the original leaked rom without a problem (and without that delay) and that allowed them to have working phones possibly because of one or all of the following:
a. It is signed by Verizon and you don't have to unlock your phone?
b. MAYBE it doesn't require the radio upgrade????
c. Because it was built using only Verizon stuff it is missing whatever incompatible tool the other kitchens have in them????
d. Because it has WM 6.0 and 6.1 hasn't been tested with Verizon????
5. DCD's rom has all of the MS Office software as an installable option whereas No2Chem's excludes it. Don't know if this includes outlook or not.
6. Both of the Kitchens mentioned above will work with Verizon and they have options that allow you to choose Verizon as an install option branding your phone correctly.
So that is upgrading your verizon phone as I understand it. Am I off too far on anything? I've not seen reports of any bricks yet but I know that is always possible.
So who has tried what ROM and to what degree of success?
Click to expand...
Click to collapse
1. There are people who say they did not need to call verizon, but i did.
2. this is mostly true, some areas still use an akey but verizon will gladly give that to you, just tell them you did a hard reset.
3. the roms that work with GPS require the 3.27 radio... I had no delay with using the phone after any flash (i've done several) there is a delay for GPS to work the first time
4.a. original leaked rom was from sprint
4.b. the radio upgrade to 3.27 is required or GPS will not work and neither will any rom that is based on this radio
4.c. again original leaked rom is from sprint and contains no verizon stuff, dcd broke down the leaked rom and made available to everyone else
4.d. the titan or xv6800 shipped with 6.0 (6.1 to release soon for verizon, although i have it now)
5. the outlook portion of office is standard on all pocket pc phone
6. True...you must choose your carrier or you won't be able to connect to your towers properly
that being said, I use a rom built with dcd's kitchen and am very pleased, if you want one with lots of stuff you may want to try nexvisions rom
Hope this helps
rmancl said:
that being said, I use a rom built with dcd's kitchen and am very pleased, if you want one with lots of stuff you may want to try nexvisions rom
Hope this helps
Click to expand...
Click to collapse
Thanks rmacl! That helps a lot. Reading through a few hundred pages of facts for different versions mixed in with cries for help and resolved issues can make the process, for someone who thought a kitchen was a room till a very short time ago, pretty daunting no matter how tech savy they are they are.
I appreciate your help in solidifying the details.
I will then be upgrading my phone tomorrow. I plan on following the easy update post listed above exactly as it is written.
I saw one post of a person who had done the same thing EXCEPT that they took a break and installed SPL 2.40-olipro. They had the 15 minute pause in aquiring the signal. So, I am wondering if that is a contributing factor. I'm thinking that the "Sprint unofficial 3.16 Release" includes an upgraded boot the spl/bootloader.
If this is a bad plan, or if it is not how you did it successfully and you are willing to share the steps you followed, please let me know.
Thanks again for your help.
EDIT: nexvisions rom pretty closely matches my current config. And what I don't have from that rom I like. The rest of the stuff I have installed should be enabled when I run a sprite backup restore. Thanks for the suggestion
Just did this today-
I'm using NexVision's Hybrid ROM(version based on dcd's latest 2.3.1).
I did the following:
1. Update SPL app
2. Loaded above ROM
3. Loaded latest radio
4. *228 'ed to get programming
5. did IOTA for some reason
6. No outgoing calls. Could not authenticate. Had to call VZW and they got me going in a few minutes. (the MSL for my phone i got from GetSPC.exe didn't work)
So, bottom line- My 6800 is working just fine with NexVisions Hybrid right now.
Anything else you'd like to know?
I was up and running on a DCD 2.3.2 cooked ROM and 3.27 radio with issues acquiring signal. Some have implied that running the "Easy Guide" instructions on PPCGeeks would resolve the delay in acquiring signal issues.
I couldn't get the leaked 3.16 ROM loaded using the 1.06 Bootloader, so I loaded the 2.40 Bootloader and then successfully loaded the leaked 3.16.
This put my phone on Sprint. According to the guide, running DCDs ROM that I cooked using the kitchen would reset the phone to Verizon (by selecting Verizon as my carrier.) This didn't work. Right now my phone is running the DCD ROM, 3.27 radio, and I can't get into the PST to edit the MSID and MDN.
Guess I'm going stock and upgrading again.
Am I the only one or is the fact that this phone is carried by at least 2.5(sorry alltell) major carriers a problem. We get people, admittedly I almost was one, that flash their phones with roms for the wrong carrier and then wonder what's going on. One would hope that you could pick up a cdma phone and use it on a CDMA network but that's just not true. There are tons of documented and undocumented crap holes that deviate from the spec because of the ad-hoc hobbled together system that is the United States cellular system. I would suggest splitting sprint and verizon but that would further fragment an already super fragmented market.
I am not sure the state of your phone or how to go about fixing it but the easy guide does seem to be for sprint users and not for Verizon. There is yet to be an uprgrade sanctioned for us - I hear it's coming, but I heard that with the Samsung i730 - and it took 9 months to get from 'soon' to released.
VX6800 DCD2.3.1 Working great
Ok I am an engineer on the network and perhaps Murphy got me to be over prepared and so I had the least problems. Started stock, flashed 2.40 unlocker, flashed DCD 2.3.1, flashed radio 3.27, booted back up and worked perfectly. I did write down everything, and I do mean everything that could be gotten in the PST ( by the way, the MSL on Verizon units is 000000 and no GetMSL is required) so I did not need that. I called VZW data support and told them that I was about to do a hard reset and had heard that sometimes the A key got messed up, so he gave it to me up front just in case, and because I had it ready is why I suppose I did not need it either. My signal came up perfectly, my PRL and provisioning data did need a *228 option 1 to get it back in, my GPS came right up fast and accurate, could make and receive calls right away, MMS worked perfectly right away. The only problem that I have with the new ROM is that the 'box type' mini-usb to 3.5 mm adapter with the mini-usb pass thru does not work properly anymore, but my stock one and my pigtail adapters do work, so it is somthing in the adapter design. Also SelectRadio 4.02 drops out as if the data connection goes down and back up, but it does not. I look at the PPP data and it is perfect, and when I just put my channels in Resco Pocket Radio all is well.
Well, I'm a long experienced IT guy with a background of working in cellular....so I'm not exactly ignorant on the subject.
madman, I did the exact steps you did, with the exception of writing down every setting in the PST (just the MSID and MDN). Yet my phone takes 15-20 minutes to acquire signal. Was there anything you had to adjust besides the MSID and the MDN?
To complete my story from my last post, I was able to recover back to a VZW stock ROM and try again. Second time around I didn't let the Sprint cutomizations run. That fixed the problem of my phone being "Sprintized". However, it didn't help with my issues acquiring signal (which was the entire reason I went through this exercise.) BLAH.
Having 1 set of instruction for Sprint and Verizon is fine, but what we need is are people from each side working together on the documentation. Right now everything seems to be completed by Sprint users.
Geckotek said:
...
To complete my story from my last post, I was able to recover back to a VZW stock ROM and try again. Second time around I didn't let the Sprint cutomizations run. That fixed the problem of my phone being "Sprintized". However, it didn't help with my issues acquiring signal (which was the entire reason I went through this exercise.) BLAH.
Having 1 set of instruction for Sprint and Verizon is fine, but what we need is are people from each side working together on the documentation. Right now everything seems to be completed by Sprint users.
Click to expand...
Click to collapse
I'm willing to bet it's the fact that you used a sprint rom. Even though it said you weren't sprintized I bet there are still sprint ghosts in your phone. These things aren't well documented nor are they straight forward. I am sure that there is something in the sprint rom that is causing your problem (it's the only thing that is different from stories of people who have been successful)
ICLKennyG said:
I'm willing to bet it's the fact that you used a sprint rom. Even though it said you weren't sprintized I bet there are still sprint ghosts in your phone. These things aren't well documented nor are they straight forward. I am sure that there is something in the sprint rom that is causing your problem (it's the only thing that is different from stories of people who have been successful)
Click to expand...
Click to collapse
Well, what you are saying is basically what I've suspected all along. I think the 3.27 radio is basically a rip from a Sprint ROM...right?
This is why I am trying to get a VZW tech to review ALL of the PST settings with me. She was gonna call back, but stupid me, I think I reset my phone and missed her call. Grrrrrr
Geckotek said:
Well, what you are saying is basically what I've suspected all along. I think the 3.27 radio is basically a rip from a Sprint ROM...right?
This is why I am trying to get a VZW tech to review ALL of the PST settings with me. She was gonna call back, but stupid me, I think I reset my phone and missed her call. Grrrrrr
Click to expand...
Click to collapse
What I am saying is the Sprint Rom is for Sprint. The radio is a radio from what I can tell. It doesn't seem to be setup to be one company or another with the correct rom. However what you are doing is taking a rom that is built by another carrier for their network and trying to use it on your network. Use a verizon intended rom (Hint: not sprint) and the 3.27 radio and you should be fine.
One would hope that you could just strip the sprint part out of their roms and run it on the VZW network but we all know these devices are more hodgepodge then strict implementation of standards.
ICLKennyG said:
What I am saying is the Sprint Rom is for Sprint. The radio is a radio from what I can tell. It doesn't seem to be setup to be one company or another with the correct rom. However what you are doing is taking a rom that is built by another carrier for their network and trying to use it on your network. Use a verizon intended rom (Hint: not sprint) and the 3.27 radio and you should be fine.
One would hope that you could just strip the sprint part out of their roms and run it on the VZW network but we all know these devices are more hodgepodge then strict implementation of standards.
Click to expand...
Click to collapse
There is no Verizon intended ROM that I'm aware of that supports the 3.27 radio.
spreeway said:
J
6. No outgoing calls. Could not authenticate. Had to call VZW and they got me going in a few minutes. (the MSL for my phone i got from GetSPC.exe didn't work)
Click to expand...
Click to collapse
getspc.exe is for sprint only
the msl code for verizon is "000000" minus the "'s
I've added a bunch of info to the first post. I haven't had time to do the flash till now. After I pack tomorrow, I should be able to do it. Plus I wanted to have all my ducks in a row for this process. I'm now fairly confident I know most of the failure points in the process and how to recover from them... we'll see.
Geckotek said:
There is no Verizon intended ROM that I'm aware of that supports the 3.27 radio.
Click to expand...
Click to collapse
Ummmmm NexVision IS a verizon user and his ROM is most certainly built for verizon above others, sprint and alltel second. DCD also has an option in his kitchen for verizon. as for No2Chem... I havnt used his rom so I couldnt tell you for sure. But I assure you as I am alive and breathing, there are ROMs intended for the Big Red V, I know I use one and Love it. I messed up when I first flashed, but never had to call VZW about it, just reflashed to stock then tried again.
As stated, I used both DCD and NexVision and both activated, called and surfed on the network. If you have any specific questions, I will gladly field them, Specialy since I have insurance on the phone... If it hoses, i will break and replace it.
Launching my first rom flashing...
blksprk said:
Ummmmm NexVision IS a verizon user and his ROM is most certainly built for verizon above others, sprint and alltel second. DCD also has an option in his kitchen for verizon. as for No2Chem... I havnt used his rom so I couldnt tell you for sure. But I assure you as I am alive and breathing, there are ROMs intended for the Big Red V, I know I use one and Love it. I messed up when I first flashed, but never had to call VZW about it, just reflashed to stock then tried again.
As stated, I used both DCD and NexVision and both activated, called and surfed on the network. If you have any specific questions, I will gladly field them, Specialy since I have insurance on the phone... If it hoses, i will break and replace it.
Click to expand...
Click to collapse
Ummmmmm, you completely missed the point.
So is there any word when Verizon will release an update similar to what we are able to do with the new ROMs and Radio?
I mean if it's going to be a month away, I may just, if it's going to be 3 months or forever then I guess I'll have to try it.
It seems either it works perfect, or it doesn't, and some people don't need to enter in an akey? Interesting...
I went from a stock XV6800 (Verizon) to the 2.40 unlocker, the 3.27 radio and a ROM built off of DCD's 2.3.2 kitchen. I did not need to record *any* of the phone's programming info. After flashing, *228 successfully set up the phone and I was able to start making/receiving calls.
"3. If you install Radio 3.27, you're a screwed verizon customer because resets (hard and soft) and power ons (?????) will no longer aquire a signal right away. You will be waiting for 15 minutes or longer before you can use your phone again and no one has a working solution to this for Verizon customers. This happens to EVERY verizon customer."
This seems not to be true, because I'm a Verizon customer and it didn't happen for me. I get both a cell and data signal right away on either reset (soft, anyway; haven't had to try hard yet) or power-on.
I'm a happy camper so far, with the only glitch being one unexplained soft reset one morning while the phone was waking up to execute an alarm. The phone reset instead and the alarm sounded when it came back up. Hasn't happened again since.
rmancl said:
getspc.exe is for sprint only...
Click to expand...
Click to collapse
No, I can verify that it works for Telus as well.
I am helping my mom with her VX6800 for verizon. I first flashed the RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4 350H_SPCS_AM_Ship ROM, just to get the radio from it (If anyone knows where to get the entire Ship ROM with 3.42.30 please tell me, can't find it). I then flashed DCD 3.2.2 and then installed the Verizon carrier cab.
The phone was working right away to make calls, although it still showed Sprint on it, as opposed to Verizon. When i try to access the internet it gives me an error saying "Dialed #777, Cannot connect for unknown reason." I had flashed a verizon phone for a friend before and had to call verizon to get a new code, doesn't seem like the issue here but not sure why i'm not getting internet service and if it has anything to do with the sprint logo showing on the screen..
TIA!!
Sounds like maybe you let the sprint ROM reboot (reset) after you flashed it to get the radio? Check the Titan WIKI on XDA and it'll tell you everything you need to know to fix it.
worthingtonmedic38 said:
Sounds like maybe you let the sprint ROM reboot (reset) after you flashed it to get the radio? Check the Titan WIKI on XDA and it'll tell you everything you need to know to fix it.
Click to expand...
Click to collapse
I have read through the Wiki a few times and it doesn't say anything in there about the ROM rebooting or resetting
"To flash, enter bootloader mode by pressing the power, camera button and then the reset button. The screen should be at a three colored (red, Blue and Green) screen, check to make sure you have the appropriate bootloader. Then plug the device and computer into the USB cable. Start the RUU.exe upgrade program on the PC that usually is provided with the ROM."
I did all this, except not sure if i am using a RUU utility, i just double click on the ROM icon,which i think has the RUU built in. It then flashes the SPrint ROM. if i am supposed to do something after it has finished flashing to prevent it from rebooting or resetting i couldn't find it in the wiki, so if u can just tell me that would help me out a lot...thanks heaps
you let the customizations run... end of discussion...
i think at this point, it'd be easiest for you to flash back to Verizon STOCK and then follow my guide to upgrade it (see signature)..
To flash back to stock, see the info from: http://forum.xda-developers.com/showthread.php?t=376873
You need to reset before the carrier customizations kick in. If you didn't then that is why you have the Sprint info on your phone.
There are a bunch of threads here about this problem. Let me see if I can find a link to one.
Here is some more info from the wiki:
do NOT boot into the OS after flashing to any of these ROMs.. After screen calibration the carrier customisations will run and alter your EPST settings to that operator's settings.
OOPS! You just let the customisations run but are with a different carrier than the ROM you just flashed to!
Choose A or B
A.follow above EPST instructions in step I to edit back to the settings that you recorded
B.Goto to the Titan Stock Page to restore your device back your carrier's default settings, boot into the OS and permit the cusomisations to run, and then return back here to start over again.
Click to expand...
Click to collapse
you dont need to reset at all. ugh. follow these steps:
1) flash sprint rom
2) at 'tap screen to set up device' flash your rom of choice
3) install carrier cab
4) soft reset
literally, its that simple. if you need a step by step, i guess here you go:
1) flash sprint rom
no need to enter bootloader unless your installing from SD​2) after rom installs, it will automatically reset
3) at 'tap screen to set up device', unplug and plug your phone back in
4)run (assuming you are using DCD) the kitchen or the RUU.
phone will reset after done installing​5) calibrate the screen and let customizations run
6) install carrier cab
7) soft reset
done
Dillsnik said:
I am helping my mom with her VX6800 for verizon. I first flashed the RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4 350H_SPCS_AM_Ship ROM, just to get the radio from it (If anyone knows where to get the entire Ship ROM with 3.42.30 please tell me, can't find it). I then flashed DCD 3.2.2 and then installed the Verizon carrier cab.
The phone was working right away to make calls, although it still showed Sprint on it, as opposed to Verizon. When i try to access the internet it gives me an error saying "Dialed #777, Cannot connect for unknown reason." I had flashed a verizon phone for a friend before and had to call verizon to get a new code, doesn't seem like the issue here but not sure why i'm not getting internet service and if it has anything to do with the sprint logo showing on the screen..
TIA!!
Click to expand...
Click to collapse
Hi there,
The 3.42.30 Radio was pulled from a Vogue and was modified to work with there Titan, therefore there is no ship ROM for it. Your best bet is to format an SD card with the FAT32 filesystem and copy the TITAIMG.NBH onto it and load up in bootloader mode. There are thorough instructions in the Titan wiki. Best of luck!
Hate to break it to you all, but if he let customizations run...then he's screwed unless he can get Verizon to issue him a DMU reset. If not, the phone needs to be replaced. End of story.
damn....I had to get a new phone after my first time flashing too...
gc14 said:
Hate to break it to you all, but if he let customizations run...then he's screwed unless he can get Verizon to issue him a DMU reset. If not, the phone needs to be replaced. End of story.
Click to expand...
Click to collapse
Are you serious?? oh no
How would you go about asking vzw for a DMU reset? i'm not sure what that is....and would vzw do a phone replacement??? they won't say it was voided?
Thanks all for all your help...i haven't had a chance to reflash anything yet, but gonna give it a go later today and pray it works!
Dillsnik said:
Are you serious?? oh no
How would you go about asking vzw for a DMU reset? i'm not sure what that is....and would vzw do a phone replacement??? they won't say it was voided?
Thanks all for all your help...i haven't had a chance to reflash anything yet, but gonna give it a go later today and pray it works!
Click to expand...
Click to collapse
if you call verizon, youre gunna have to make it sound like you know WAY more than they do about the issue. if you google 'DMU reset', im sure youll find some information about this. if you have another phone, switch your service to the other ESN, then switch it back. then call verizon and say that your MIP settings are not receiving a static IP from verizon. tell them you just switched your service back to this phone, and youve had this issue before. Tell them you need the data features removed and re-added to the account, and you need your DMU keys reset.
if you cant switch ESNs to and back, youll have to say you had a serious software issue on your phone, which required a hard reset and now your data connection is taking way longer than normal to connect, and you would like your DMU keys reset.
i recommend researching as much as you can about this before calling. depending on the TSR you get, they could ask you alot of questions. most of the time, if you answer all their questions before they ask them, theyll do what you say
EDIT:
when you do talk to them, before they can tell you any steps, make sure you tell them that you've:
soft reset
hard reset
clear storage
*288 1
*228 2
*22899
those are all the general things theyre gunna tell you to do before they reset anything for you. you just need to make it sound like youve already done everything possible, so the last possible step is resetting your keys for you
VZW has....well, an interesting way of doing things
So, I spoke to a VZW rep tonight after flashing back to a stock VZW ROM and, as expected, not getting a data connection (or able to make calls).
The rep was pretty helpful and knowledgeable. Mind you, i am on AT&T and this is my mom's phone i am helping her with (or at least trying to ). ATT base reps suck and for any minor network thing i would always need to speak to a data support tech (who these days tend to also suck pretty bad as well!) This VZW rep was no dummy and, to my surprise, understood all the things i threw at her. She was overly diligent which gets annoying, retrying lots of the same things, but i understand these people need to be, and she was making progress (bc after flashing the stock ROM my voice calling wasn't working initially either).
When I mentioned doing a DMU reset she explained that she can't do that and in order to have that done she needs to submit a request to her network team. I thought she would have them call me to troubleshoot the problem or something, but that isn't how it works . The network team doesn't speak to customers; she would be calling me back to tell me that the problem should be fixed and they did what they needed to do. I found it odd that they wouldn't need to speak to me to find out if it is working or not....Apparently, she said, they can tell if my phone is working/not working for the data connection.
For now i am kind of impressed with VZW's whole approach on how to solve this kind of thing (although it'd been nice if i coulda spoke NOW to a rep that can actually fix my problem), but i am a bit skeptical that it is actually gonna happen. We'll see what they come back with and hopefully i don't get run around in circles and they can indeed get my data working by resetting the DMU or whatever they need to do.
So, I spoke to a VZW rep tonight after flashing back to a stock VZW ROM and, as expected, not getting a data connection (or able to make calls).
The rep was pretty helpful and knowledgeable. Mind you, i am on AT&T and this is my mom's phone i am helping her with (or at least trying to ). ATT base reps suck and for any minor network thing i would always need to speak to a data support tech (who these days tend to also suck pretty bad as well!) This VZW rep was no dummy and, to my surprise, understood all the things i threw at her. She was overly diligent which gets annoying, retrying lots of the same things, but i understand these people need to be, and she was making progress (bc after flashing the stock ROM my voice calling wasn't working initially either).
When I mentioned doing a DMU reset she explained that she can't do that and in order to have that done she needs to submit a request to her network team. I thought she would have them call me to troubleshoot the problem or something, but that isn't how it works . The network team doesn't speak to customers; she would be calling me back to tell me that the problem should be fixed and they did what they needed to do. I found it odd that they wouldn't need to speak to me to find out if it is working or not....Apparently, she said, they can tell if my phone is working/not working for the data connection.
For now i am kind of impressed with VZW's whole approach on how to solve this kind of thing (although it'd been nice if i coulda spoke NOW to a rep that can actually fix my problem), but i am a bit skeptical that it is actually gonna happen. We'll see what they come back with and hopefully i don't get run around in circles and they can indeed get my data working by resetting the DMU or whatever they need to do.
Click to expand...
Click to collapse
She could have performed the DMU reset without bringing in the network team. She just didn't know how.
oh. well, for what it's worth, your support reps (even the bad ones apparantly) for the most part seem way better than the ones @ ATT! still not planning on switching any time soon though
Thank you!
I just want to deeply thank everyone that contributed to helping me get my problem fixed. The phone is now up and running and I am most appreciative to all of you that took the time to help me!!!
You really have a great community here!
FWIW, Verizon data tech fixed my problem but when i asked what he did he would not tell me....he basically said he "checked some things out and madde sure everything was set up right" while he had me take out my battery and wait. I asked what specifically he did, for research purposes and he said he couldn't tell me
Lol..he performed a DMU reset. I swear some of those techs are so dumb.
Well, he actually denied that he did a DMU reset cause i asked if that was specifically what he did and he said, no...i just checked some things out...and wouldn't tell me what he did.
i am sure you're right, he did the reset, but they must be instructed not to tell customers what they do...i guess maybe to try to prevent us from telling them what to do?
ok this is what i did....i started from stock rom and upgraded my radio and rom to the newest available from dcd ( dcd 3.2.5 and Radio ROM 3.42.50).......i ran the verizon carrier CAB and for some reason when i dial #228 or any other kind of numbers for verizon it rings and goes to the recorded sprint guy giving me an error....any body know why???
you *MIGHT* have to soft-reboot first, I'm not sure.
Actually wait - did you say Sprint guy?
scrawnyb said:
you *MIGHT* have to soft-reboot first, I'm not sure.
Actually wait - did you say Sprint guy?
Click to expand...
Click to collapse
yea the spring guy, you know how they have different people for each service, like we have the lady for verizon and there is that guy for sprint?....well i am getting error messages from him
it might be a A-key issue, but i never heard of a sprint guy on a verizon network *228 phone call.. you pressed *228 and not #228 right?!?!
madjokeer said:
it might be a A-key issue, but i never heard of a sprint guy on a verizon network *228 phone call.. you pressed *228 and not #228 right?!?!
Click to expand...
Click to collapse
yep im doin *228....and i just got a new a-key and everything from verizon before i upgraded....the first time i ever got on sprints network was when i accidently let the customizations run when i had to use their official rom update to upgrade my radio a few months ago and i found that i could still make phone calls and texts but had no data....and since the signal was significantly better i kept it that way when i put dcds rom on my phone.....well since this new radio releases people have been saying they get better signal so i wanted to test it and started from scratch but somehow i am on sprints network still and i havent let any kind of customizations run at all
bump...........
colton1118 said:
yep im doin *228....and i just got a new a-key and everything from verizon before i upgraded....the first time i ever got on sprints network was when i accidently let the customizations run when i had to use their official rom update to upgrade my radio a few months ago and i found that i could still make phone calls and texts but had no data....and since the signal was significantly better i kept it that way when i put dcds rom on my phone.....well since this new radio releases people have been saying they get better signal so i wanted to test it and started from scratch but somehow i am on sprints network still and i havent let any kind of customizations run at all
Click to expand...
Click to collapse
you let the customizations run... thats why.
Your phone is 'stuck' on Sprint's network until you relock, flash back on the Verizon stock ROM, and get a DMU/data reset.
The first part is easy, but getting them to do a DMU reset for your data (if you even need it, which isn't clear at this point) is kind of a pain in the ass from what I've heard.
See this link:
http://forum.ppcgeeks.com/showthread.php?t=21161
scrawnyb said:
you let the customizations run... thats why.
Your phone is 'stuck' on Sprint's network until you relock, flash back on the Verizon stock ROM, and get a DMU/data reset.
The first part is easy, but getting them to do a DMU reset for your data (if you even need it, which isn't clear at this point) is kind of a pain in the ass from what I've heard.
See this link:
http://forum.ppcgeeks.com/showthread.php?t=21161
Click to expand...
Click to collapse
i didnt let any customizations run
happened to me to once
Are you in an area with a weak signal? if you are go to a place where you hava good "Verizon" signal and try again. Worked for me!
colton1118 said:
but somehow i am on sprints network still and i havent let any kind of customizations run at all
Click to expand...
Click to collapse
You are contradicting yourself now...
colton1118 said:
the first time i ever got on sprints network was when i accidently let the customizations run when i had to use their official rom update to upgrade my radio a few months ago and i found that i could still make phone calls and texts but had no data....
Click to expand...
Click to collapse
Once you let Sprint's customizations run, they stick until you undo them by reflashing to a Verizon ROM (Stock with all the settings and stuff)
Does it say Sprint instead of Verizon Wireless wherever your phone indicator is? If so, you are on Sprint's Network...
scrawnyb said:
You are contradicting yourself now...
Once you let Sprint's customizations run, they stick until you undo them by reflashing to a Verizon ROM (Stock with all the settings and stuff)
Click to expand...
Click to collapse
i am referring to when i first started using custom roms....i undid everythig and started from verizons stock rom when i started trying to install this new radio and rom......
Does it say Sprint instead of Verizon Wireless wherever your phone indicator is? If so, you are on Sprint's Network...
Click to expand...
Click to collapse
it says vzw (i ran the cab when i first installed the rom and radio).....but for some reason i am getting sprint error messages when i try to dial the *228....this go around i havent let ANY customizations run....i even used the kitchen for dcd 3.2.5 and unchecked the box for UC Autorun
colton1118 said:
i am referring to when i first started using custom roms....i undid everythig and started from verizons stock rom when i started trying to install this new radio and rom......
it says vzw (i ran the cab when i first installed the rom and radio).....but for some reason i am getting sprint error messages when i try to dial the *228....this go around i havent let ANY customizations run....i even used the kitchen for dcd 3.2.5 and unchecked the box for UC Autorun
Click to expand...
Click to collapse
You may still be stuck with a Sprint PRL/PRI or whatever.
Um, if I can find a way to export mine, I can upload it for you to import...
P.S. customizations on custom roms like DCD should be allowed to run, as they don't contain carrier-specific information, unless noted to have so.
scrawnyb said:
You may still be stuck with a Sprint PRL/PRI or whatever.
Um, if I can find a way to export mine, I can upload it for you to import...
P.S. customizations on custom roms like DCD should be allowed to run, as they don't contain carrier-specific information, unless noted to have so.
Click to expand...
Click to collapse
k after u try to find a way to export i will redo everything and let the customizations run....thanks for the help
colton1118 said:
k after u try to find a way to export i will redo everything and let the customizations run....thanks for the help
Click to expand...
Click to collapse
Yeah, if you get it working on Stock finally (like everything working again, calls and data and everything), then just follow my guide to getting updated.
I'm gonna keep looking to see what I can come up with.
scrawnyb said:
Yeah, if you get it working on Stock finally (like everything working again, calls and data and everything), then just follow my guide to getting updated.
I'm gonna keep looking to see what I can come up with.
Click to expand...
Click to collapse
i have no problem getting it to work on stock
colton1118 said:
i have no problem getting it to work on stock
Click to expand...
Click to collapse
So when you go back to stock, EVERYTHING works? (Calling, Data, MMS, etc...) ?
scrawnyb said:
So when you go back to stock, EVERYTHING works? (Calling, Data, MMS, etc...) ?
Click to expand...
Click to collapse
yea i got it all working before my previous upgrade.....i guess i will try starting over again and follow your guide and see what happens
i had an AT&T message once when i tried doing *228 2 one time. wicked weird. i did *22899 first and let the phone reset then did *228 2 again and programmed successfully
kflipproductions said:
i had an AT&T message once when i tried doing *228 2 one time. wicked weird. i did *22899 first and let the phone reset then did *228 2 again and programmed successfully
Click to expand...
Click to collapse
i cant do *22899......it says the feature code i have entered is not valid
I laugh a little every time I see someone post about *22899. *22899 does NOTHING different than dialing *228 option 1. It simply overrides the prompt and is used by Verizon during activation or troubleshooting so they can dial it and put the phone down to work on other stuff.
For some reason, people think it's like this secret magic fix and it absolutely is not.
Any ideas? I have a Plain Jane rooted TB that has been stuck in 1X despite (in order):
- rebooting
- pulling battery
- restoring a known good saved ROM from ROM Manager
- toggling enable on RevA
- installing jcase's rooted 1.70.605 OTA and MR2 radio
- factory reset
I am in midtown Manhattan. I should have stellar 3G/4G. Is there anything left to do but return the phone to VZ?
Bluecat.NYC said:
Any ideas? I have a Plain Jane rooted TB that has been stuck in 1X despite (in order):
- rebooting
- restoring a known good saved ROM from ROM Manager
- toggling enable on RevA
- installing jcase's rooted 1.70.605 OTA and MR2 radio
- factory reset
I am in midtown Manhattan. I should have stellar 3G/4G. Is there anything left to do but return the phone to VZ?
Click to expand...
Click to collapse
You should check your settings and see if your mobile network is on(obvious answer and I feel like you have probably done that). Make sure you dont have any apps that are turning it off i.e. juicedefender or any other apps that control your mobile network. It could be the ROM you are using so try and use your stock ROM and see if you get 3G/4G in that. Make sure your SIM card is in properly. I do not know if that will be an issue but it could help. Also along with ROMs make sure the ROM you are using is friendly with the radio you are using. I can not think of much else. Google it too and search this forum or others that might help too! Good luck.
The simplest and most obvious possibility that still has to be asked: Do you have the back cover on the phone?
wichi2010 said:
You should check your settings and see if your mobile network is on(obvious answer and I feel like you have probably done that). Make sure you dont have any apps that are turning it off i.e. juicedefender or any other apps that control your mobile network. It could be the ROM you are using so try and use your stock ROM and see if you get 3G/4G in that. Make sure your SIM card is in properly. I do not know if that will be an issue but it could help. Also along with ROMs make sure the ROM you are using is friendly with the radio you are using. I can not think of much else. Google it too and search this forum or others that might help too! Good luck.
Click to expand...
Click to collapse
I have the Stock ROM w/corret radio and yes mobile is on, airplane mode off. Also tried pulling the battery. This sucker stuck on 1X for dear life.
FreemanB said:
The simplest and most obvious possibility that still has to be asked: Do you have the back cover on the phone?
Click to expand...
Click to collapse
yes, back cover is on
I had the same problem you did. I used Bamf 3.0 and flash the newest leak radio. My phone all of the sudden the next day dropped 3G. I went into the VZ store today and told them my sim card died and they gave me a new one. It working now, so I said unroot your phone like I did and get a new sim card. Make sure you update to their newest software before going into the store.
Seem like alot of people on the forum are saying they are not getting 3G/4G lately after the new radio that was out. I got my radio the day it was leak.
gammagogeta said:
I had the same problem you did. I used Bamf 3.0 and flash the newest leak radio. My phone all of the sudden the next day dropped 3G. I went into the VZ store today and told them my sim card died and they gave me a new one. It working now, so I said unroot your phone like I did and get a new sim card. Make sure you update to their newest software before going into the store.
Seem like alot of people on the forum are saying they are not getting 3G/4G lately after the new radio that was out. I got my radio the day it was leak.
Click to expand...
Click to collapse
Thanks. But I had my problem before I flashed the new radio. I've been using the original plain jane root from back in March. It worked two nights ago, was stuck in 1X the next morning.
Since I now have the new OTA stock is there an easy way to get it out of root or should I just follow the sticky instructions and go all the way back to original ROM?
Instead of taking it in you could also just give them(verizon) a call. I know they can see if your phone is rooted from there and many verizon workers have theirs rooted and might be able to help you!
Yeah mine worked 2 days ago too but yesterday it died I was using bamf for a while now. I flashed the radio before that too, all of the sudden it just dropped. The guy at VZ store told me that never happened before that a sim card just die like that.
wichi2010 said:
Instead of taking it in you could also just give them(verizon) a call. I know they can see if your phone is rooted from there and many verizon workers have theirs rooted and might be able to help you!
Click to expand...
Click to collapse
Thanks, but I spoke to VZ last night. The rep was nice and all but said the factory reset should fix the problem (it didn't) He said the next step would be to replace the phone. I might call again tonight to see if I can bump up the tech support ladder to someone more knowledgeable. Still hoping someone here could help me out.
Like I said, I had the original plain jane root that everyone did back in March when the phone came out. No reason for it to suddenly get stuck in 1X the other day.
Ive had that problem twice now. The first time my 4g antenna stopped working for whatever reason. I replaced the battery cover and it worked again for a few days. When it stopped again I called verizon and they sent me a new phone which is probably what youre gonna have to do.
So... VZ is next-day mailing me a new phone. I wanted to exchange it in the city but they said once you have the phone for more than 14 days exchanges have to be done by mail. Still, I'd love to know why the phone died.
To be clear, I have absolutely no idea what I'm doing, and no experience whatsoever with any of this.
Over 12 hours of research I managed to unlock the bootloader, root, and flash my TextNow Moto E with a stock US Cellular ROM. Everything worked fine.
What are the next steps to take, if any? Is it possible to even use a GSM network on this phone? I have an active T-Mobile sim card that the phone simply will not accept. I get a "no sim found" notification.
I attempted this with no success.
To start, su command would not work.
This worked for me on the XT1529, but it might work on the XT1526 as well since they're both LTE/CDMA devices:
root, open /system/build.prop, add the following line to the end: ro.telephony.default_network=10
save, make sure the permissions are still 0644, reboot.
When you check *#*#4636#*#* it should be in LTE/GSM/CDMA mode, and in Settings > Mobile Network it should say "Global".
xtermmin said:
This worked for me on the XT1529, but it might work on the XT1526 as well since they're both LTE/CDMA devices:
root, open /system/build.prop, add the following line to the end: ro.telephony.default_network=10
save, make sure the permissions are still 0644, reboot.
When you check *#*#4636#*#* it should be in LTE/GSM/CDMA mode, and in Settings > Mobile Network it should say "Global".
Click to expand...
Click to collapse
This didn't work. I ended up experimenting more and softbricked my phone, got stuck in a boot loop. Through curiosity I ended up flashing the phone with a stock xt1527 rom. SIM now recognized as a non supported sim, so that's nice. Still doesn't work.
I cannot post links to screens as a new user, but if you happen to want to see them, message me and I'll link them from my dropbox.
I ended up ordering an unlocked xt1527 last night. However, I would still like to figure this out. Would I perhaps have to flash the modem?
akaholik said:
This didn't work. I ended up experimenting more and softbricked my phone, got stuck in a boot loop. Through curiosity I ended up flashing the phone with a stock xt1527 rom. SIM now recognized as a non supported sim, so that's nice. Still doesn't work.
I cannot post links to screens as a new user, but if you happen to want to see them, message me and I'll link them from my dropbox.
I ended up ordering an unlocked xt1527 last night. However, I would still like to figure this out. Would I perhaps have to flash the modem?
Click to expand...
Click to collapse
You could try the procedure posted in this thread if you haven't already, assuming your still on the xt1527 rom:
http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953
hydroman202 said:
You could try the procedure posted in this thread if you haven't already, assuming your still on the xt1527 rom:
http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953
Click to expand...
Click to collapse
Just tested this - not working. This is a really maddening scenario
I contacted sprint and gave them the IMEI - they tell me that this phone can indeed be unlocked (xt1526), but I would have to do it through TextNow. I've searched for ways to bring up the SIM unlock prompt, but it simply doesn't show up with any of the methods found. :s
akaholik said:
I contacted sprint and gave them the IMEI - they tell me that this phone can indeed be unlocked (xt1526), but I would have to do it through TextNow. I've searched for ways to bring up the SIM unlock prompt, but it simply doesn't show up with any of the methods found. :s
Click to expand...
Click to collapse
I am also having problems finding this menu. I wish there was an easy way to access it, but unfortunately, sprint has made it rather difficult.
hydroman202 said:
I am also having problems finding this menu. I wish there was an easy way to access it, but unfortunately, sprint has made it rather difficult.
Click to expand...
Click to collapse
I still have my sprint model as well, and have the MSL code. But I have also never found a way to enter it for unlock. I've tried using active ATT and VZW SIMs, and also tried flashing the USC modem on it - still works on sprint / ringplus, but also still won't acknowledge ATT or VZW SIMs.
Sent from my XT1526 using Tapatalk
dandrumheller said:
I still have my sprint model as well, and have the MSL code. But I have also never found a way to enter it for unlock. I've tried using active ATT and VZW SIMs, and also tried flashing the USC modem on it - still works on sprint / ringplus, but also still won't acknowledge ATT or VZW SIMs.
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
I don't know for sure, but i did read in another place on here somewhere about an "embedded card" that sprint put in another phone. I wonder if that is the case with this one? If not, all i can really think of is that there is something in place that motorola made specifically for the sprint model. We know its not modem related, so it must be somewhere else, in the NAM, or something like that. One thing i did accomplish was to get another bar, (it had no signal and looked like an outline, but it was there), show up by editing the build prop with a specific line and then rebooting. Odd thing is, its the same thing that showed up when i attemped to flash another stock firmware. The firmware i flashed was for the xt1526, retail us. Which leads me to think it might be a band issue, as someone else mentioned in another thread on here somewhere. I mean, it would make sense with the no signal and everything. Sorry for the long post, just thinking out loud i guess.
hydroman202 said:
I don't know for sure, but i did read in another place on here somewhere about an "embedded card" that sprint put in another phone. I wonder if that is the case with this one? If not, all i can really think of is that there is something in place that motorola made specifically for the sprint model. We know its not modem related, so it must be somewhere else, in the NAM, or something like that. One thing i did accomplish was to get another bar, (it had no signal and looked like an outline, but it was there), show up by editing the build prop with a specific line and then rebooting. Odd thing is, its the same thing that showed up when i attemped to flash another stock firmware. The firmware i flashed was for the xt1526, retail us. Which leads me to think it might be a band issue, as someone else mentioned in another thread on here somewhere. I mean, it would make sense with the no signal and everything. Sorry for the long post, just thinking out loud i guess.
Click to expand...
Click to collapse
Yes, I'm hoping there is a fix somehow. I'm ok to use the phone on WiFi, but it is otherwise useless to me. I'd like to have a backup phone in case my first Moto E dies, they are really rugged. I have experimented all day without success. Experimenting with build.prop does nothing. I export the build.prop text and post it just for reference, if anyone cares to play with it.
hydroman202 said:
I don't know for sure, but i did read in another place on here somewhere about an "embedded card" that sprint put in another phone. I wonder if that is the case with this one? If not, all i can really think of is that there is something in place that motorola made specifically for the sprint model. We know its not modem related, so it must be somewhere else, in the NAM, or something like that. One thing i did accomplish was to get another bar, (it had no signal and looked like an outline, but it was there), show up by editing the build prop with a specific line and then rebooting. Odd thing is, its the same thing that showed up when i attemped to flash another stock firmware. The firmware i flashed was for the xt1526, retail us. Which leads me to think it might be a band issue, as someone else mentioned in another thread on here somewhere. I mean, it would make sense with the no signal and everything. Sorry for the long post, just thinking out loud i guess.
Click to expand...
Click to collapse
its not an embedded card in the textnow wireless version as ive taken the sim card out of mine. The S3 was an imbedded card, but not this device. Im also searching for a method to sim unlock this little bugger. Ill let you know what i find out
youdoofus said:
its not an embedded card in the textnow wireless version as ive taken the sim card out of mine. The S3 was an imbedded card, but not this device. Im also searching for a method to sim unlock this little bugger. Ill let you know what i find out
Click to expand...
Click to collapse
I talked to Sprint - they told me TextNow has to SIM unlock the device. I talked to TextNow - They told me the device IS SIM unlocked. So, there's that if anybody is wondering. I've almost abandoned this experiment, but it's still in the back of my mind. In other news - the new Moto E 2015 I received has a yellowed display. 2/3 brand new Motorola devices I received had display issues. Excellent phones, poor quality control it seems.
akaholik said:
I talked to Sprint - they told me TextNow has to SIM unlock the device. I talked to TextNow - They told me the device IS SIM unlocked. So, there's that if anybody is wondering. I've almost abandoned this experiment, but it's still in the back of my mind. In other news - the new Moto E 2015 I received has a yellowed display. 2/3 brand new Motorola devices I received had display issues. Excellent phones, poor quality control it seems.
Click to expand...
Click to collapse
i got my E2015 from textnow for $10 as a refurb and its solid as a rock so far. I stumbled upon this thread and it looks promising, but im at work and we use citrix clients and not actual computers so i cant run it here, but ill give it a whirl when i get home. I do also believe that its GSM unlocked
Trying to make my XT1526 (Boost stock ROM) work with GSM, and got stuck on something weird. Inserted a SIM card from China Mobile, changed the network mode to "Global" and turned on roaming, after a while it got successfully registered on T-Mobile network, both voice and data. Yet, when I inserted a T-Mobile SIM card, the phone gave an "Invalid SIM card" error, and simply refused to connect. Thought it might be an issue with APN setting, but I couldn't manually add the T-Mo APN to the phone (in fact it wouldn't take any APN).
I think the phone's hardware is capable of LTE/CDMA/GSM. It's a just matter of figuring out the right configuration.
ck9068 said:
Trying to make my XT1526 (Boost stock ROM) work with GSM, and got stuck on something weird. Inserted a SIM card from China Mobile, changed the network mode to "Global" and turned on roaming, after a while it got successfully registered on T-Mobile network, both voice and data. Yet, when I inserted a T-Mobile SIM card, the phone gave an "Invalid SIM card" error, and simply refused to connect. Thought it might be an issue with APN setting, but I couldn't manually add the T-Mo APN to the phone (in fact it wouldn't take any APN).
I think the phone's hardware is capable of LTE/CDMA/GSM. It's a just matter of figuring out the right configuration.
Click to expand...
Click to collapse
thats a DSU issue. Domestic sim unlock can be tricky
youdoofus said:
thats a DSU issue. Domestic sim unlock can be tricky
Click to expand...
Click to collapse
Why so tricky? Why? I am truly of no help, I just started the thread. Learning as I go...funny thing. Upon flashing again with the xt1527, and flashing the modem with a different modem software, the phone still shows to be a sprint modem software.
I wonder if the "fastboot oem config carrier" option would do any good?
DSU is tricky because it involved modifying the NV values thats buried in the radio software and it has a similar access issue to SU. I have (among many others) a Sprint S5 (G900P) and achieving DSU on it was the work of some SERIOUS developers. The config carrier might be of some help, but i havent delved into it yet, and im not sure if id fully understand what it means anyways. Additionally, Moto devices are tricky period. I had 2 Razrs (one xt 912 and one xt910), one of them was GSM unlockable and the other wasnt. Motorola mobile phone division has also changed hands recently, so its direction has also changed. Basically, whats needed here is either a ton of forum scouring or a developer to actually pay attention to this device, or a bit of both