Anyone having the same issue? The Flash went smooth for me, GPS is working fine but unably to sync via USB to Vista pc to get my contact up and other apps istalled. Or did I do somthing wrong during the flash/cooking?
Related
Now that i have finally been able to get WMDC working with my TyTn in vista, I'd lik eto know if anyone has successfully flashed there phone using vista?
I'll give it a go sometime over the weekend if no one has.
ptm
I have tried to Flash but does not work for me, but I have a dual boot so flash with xp.
Flashing not working on Vista RC1.5728
Syncing on Vista RC1 is possible, as mentioned in this thread:
http://forum.xda-developers.com/showthread.php?t=275786
So far, everything I tried, including bootloading, with TyTN, results in error 260. It is listed an an error caused by an open port, but I've not been able to run down a fix for this. The official WMDC is being released soon, check above link.
I recall reading that the software for unlocking/flashing custom roms was for XP only. Is there a solid, working solution for Vista yet? If not, is anyone planning to make one?
How does activesynch work with vista & outlook 2k7? Any downsides to upgrading?
Might have been problems with Vista 64, I'm running Vista 32 and have never had a problem with custom roms.
Im a vista user and never had any problems, i never read too much into it but from what i understand its because they dont update their drivers. Someone posted the driver update in this section. Ive tried dcd's and currently using no2chems latest.
Using Vista
I use Vista on my laptop and have been experimenting with the HTC Titan since mid December.
So far, I never had an issue with Vista ( and I have experimented lots!!)
The only thing with Vista on my phone compared to my XP desktop at work is that the transfer of files to the HTC is must faster with XP. The XP machine also connects and syncs a bit faster than the Vista.
I can confirm that running Titan_Unlocker, and loading ROMs via Vista 32 with Windows Mobile Device Center works just fine.
Vista USB
I have not been able to connect with USB on my computer runing vista. I use of course windows mobile device and connect thru bluetooth, but have never been able to connect with usb. I checked the setting I WMB and have allow usb connection,.
I can tell you from experience that flashing thru bluetooth boes not work. Tried it about a year age with the Vzw upgrade on my 6700, locked up in bootloader screen, I took it to vzw and they gave me a new 6700.
That's odd ^
My Sync works both ways, and out does XP in every single way.
Vista performance depends on hardware mostly, and top notch gets you top performance.
I haven't had any problems syncing with vista.
I did have one problem when trying to upgrade to a custom rom and maybe someone here can help me answer it.
I got the sprint 3.16 test rom on there ok, then i installed the unlocker, but i couldn't get out of bootloader screen. I had the exit bootloader program but it kept saying it couldn't find the usb. then i tried attaching it to my xp comp and running the exit bootloader app and it said it was missing some dll file. so i tried redownloading and even emailing the exit bootloader from my other comp but same issue, missing dll file.
I ended up just loading the relocker and then going straight back to the latest rom because i couldn't figure it out.
I am debating between getting rid of the 6800, just dealing, or trying again to upgrade to the DCD ROM.
When I did it last time, I had an issue with using Active Sync on 2 computers. One was XP, one was Vista.
Has anyone had any experience with this?
dkreifus said:
I am debating between getting rid of the 6800, just dealing, or trying again to upgrade to the DCD ROM.
Click to expand...
Click to collapse
You say "trying," what is your problem and where are you at?
I upgraded once, bu thad the issue with XP and Vista and the ActiveSync. So I got rid of the ROM. I switched to a 'verizon' rom i had found. eventually, i had the phone replaced.
So I'm not sure if I want to try to upgrade this phone. Is there a way to save my existing ROM or state, so I can revert back if needed?
What issue with activesync were you having? What version of activesync do you have? What dcd rom and radio did you flash? your being vary vauge.
I had a terrible time working with my new laptop and vista, and some things still do not work as they do on my XP desktop. A few radio upgrade files will not flash, but the full upgrade flash (sprint flash) will. I have DCD's kitchens up and running and have flashed several times now using them on my Vista laptop.
The key for me on vista was having a windows mobile device center profile set for the phone, and open in the background when flashing. I too am still working on getting everything as seemles as it is on my desktop so I hope this helped a bit.
Well i tried to upgraded to 3.56 official sprint from 3.35 but (i use the usb method i dont know how to use sd card) but whenever on the upgrade process when it restarts the phone the ruu doesnt recognize the phone i get an error from windows saying that it hasnt passed the windows test thingy. And the laoder hangs at 0 but my phone doesnt have a load bar and then error comes up saying it couldnt detect my phone.
I would suggest reinstalling 3.35. Then download the 3.56 from the HTC again and attempt to reinstalling. Lastly since you are dealing with a Mogul( I assume) call Sprint and they should help. My boss had a similar issue when going to 3.35. You are doing something perfectly legit unlike us VZW folks.
Wait so i should reinstall 3.35? it works fine i think it might have to do something with the usb cord im doing the upgrade on another computor (desktop not my laptop) i cant use my laptop. Ill call sprint see if they can help and uf u wabt ti dk 3.35 i dont have to do anything special just run the ruu?
Here's what I did when I received this same error message.
I reset my Mogul (it was stuck on the rainbow screen) and it came back up fine. All my data and settings were still intact.
I disabled Norton Auto-Protect and Firewall. Reran the 3.56 RUU and I no longer received the unable to connect message.
My firewall is off and norton is off still error
plz help?
Are you running Vista? Some have had issues (including myself) with running the upgrade in Vista. I had no issues running it in XP. Some Vista users that received error messages had success when they went back to the HTC upgrade site clicked on the link and chose Run instead of Save.
hth
nope windows xp
ima try to upgrade it again
OMG OMG i plug in my phone i ran the ruu but i thoguht hey ill wait so i pressed cancel unplugged my phone and now it barely finds a signal [email protected]#[email protected]#[email protected]
Hi.
I have a big problem.
Im installed this rom
http://pdaclub.pl/forum/index.php?topic=117019.0
its on qsqa 3.0 proffesional rom based
and now activesync cannot connected with phone.
Why?
im trying everything
You should ask author first in pdaclub.pl
I see 1.07 in your signature and new build. Better than 20759 ? I'm still using 19971 that's why I'm asking you.
Pozdro
szmidt344 said:
Hi.
I have a big problem.
Im installed this rom
http://pdaclub.pl/forum/index.php?topic=117019.0
its on qsqa 3.0 proffesional rom based
and now activesync cannot connected with phone.
Why?
im trying everything
Click to expand...
Click to collapse
Jeez,is this promoting a other website here on xda
You should ask it there
Have you tried rebooting your computer? I know it sounds simple, but I had a very similar problem when I flashed my Fuze from ATT stock rom to ROMeOS. Everything I did with the phone didn't help, but a simple reboot of the PC and everything is fine.
Never had the same problem with a Hermes phone, so I can only guess that something about the Raphael ROM is causing the problem.
Who knows it could be the rom. Insure Start-->programs-->(system, or whatever folder you may have it in)-->ActiveSync-->menu-->connections the Synchronize all PCs using this connection is checked and `USB is selected in the drop down.
Good luck
From the beginning i had terrible problems with activesync, and finally i relised that the 2meter usb cable i have is too long for that work !!! After i worked with a 30-40 cm cable everything was excellent.