Hello,
I made so many search in the forum to solve my problem,but it doesnt work.
I have Imate JamIN, I did so many upgrades, and it works with me.
The SPL is 2.G4.4PDA (Hard SPL)
I installed The RUU and upgrade to transformer 1.1, it use to be fine with me before, but now when i reset or hard reset the phone, the screen is blocked on Loading OS with windows vista Background. IS it because of the Hard SPL?
When i do reset, The screen fade to white and then it will reset, I dont know the problem
So now when i want to run The RUU again, an error 260 that am not connecting the cell to pc....
i wish it was the 3 colors, it wont be a problem
Is my Phone is dead?can i recover?how?
Thank You
Have you tried entering bootloader? Start up the device, hold the Comm Button and soft reset. That should get you to the bootloader screen at which you should be able to flash a ROM.
Thanks man,it works with me
Enjoy some more ROM flashing!
Related
i began to upgrade with dcds 2.40 olipro hard spl and after the initial loading was instructed to disconnect device, after reconnting device i ran the rest of the programs rom and such and now i'm left with the 2.40 olipro screen will not reboot. i have tried hard reset and soft reset and even power camera and soft reset keys, nothing has worked yet. please hlep me figure this out and whether or not my device is bricked? also i'm runnig on the alltel network if it helps.
You're OK
You're probably just fine--95% probability--Just go ahead and flash the radio, then flash the rom, and then see what you get.
alright, thanks i'll try that and let ya guys know how it goes
Can anyone please post a guide on how to flash Hard-SPL onto my HTC TYTN.
The guide for installing Hard-SPL onto the HERMES is not available anymore, and i am EXTREMELY confused about what im doing, and i am afraid i will brick my phone if i do something wrong.
Please please please help!
Read the sticky, first post on this page.
It really isn't hard to do. But be sure you know what you are doing btw. SO read the sticky!
Basically you just download the flavor of Hard SPL you want (I used 2.10 which I can recommend, very easy to downgrade to factory SPL again as I just learned!).
After download unzip the folder and run the RUUWrapper. Follow instructions exactly, do nout unplug your device etc. and it should work like a charm. It takes about 1 minute!
If you don't know what you are doing or you are still doubting, wait for Mr Vanx site to come online again or don't flash. There is always a risk you screw up and end with a $500 brick.
So use at your own risk!
Download hard spl v7 from
http://forum.xda-developers.com/showthread.php?t=296722
thanks guys i did it
hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca
puca said:
hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca
Click to expand...
Click to collapse
start the device in bootloader, what is displayed?
Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.
Rockford_622 said:
Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.
Click to expand...
Click to collapse
the SPL flash is VERY quick.
I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.
hi mrvanx
thanks for your reply after checking the bootloader it has changed to 2.10 olie it did it so fast i thought it had failed will check properly next time and have successfully flashed it to crc 9 and it runs great thanks for all the help
mrvanx said:
the SPL flash is VERY quick.
I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.
Click to expand...
Click to collapse
I appreciate your reply Mr. Vanx. Same as with puca, I put my phone into the bootloader mode and it does indeed show the correct 2.10 Olipro version. This is the 3rd 8525 I have had and I could have SWORN it took much longer on the first 2. Even the update from WM5 to WM6 seemed to take much less time with this particular phone. Guess I shouldn't really complain
Downgrade Error 260
Hi Mr Vanx I have followed your guide to downgrade my current SSPL (2.10 Olipro) to SSPL (1.11). But I keep getting error 260. I have followed guide step by step.
I have even tried flashing from SD-Card (by renaming to HERMING.nbh). Process runs successfully, but nothing happens.
Its still showing SSPL-2.10 Olipro in bootloader. Am I missing anything?
Thanks
can some one point me to the guide. I am facing a NO GSM problem on vodafone VPA 1605 with following config:
ROM Version: 1.20.161.6
Radio: 1.03.06.00
CID: VODAP001
Bootloader: 1.04
I do not see the radio version or the IMEI. So I would like to do a HARDSPLv7 followed by Radio ROM update to 1.06.00.10. I hope this will work. Seniors may help with their sggestion.
Can someone help me with the guide to HARDSPL as I am doing it for the first time and the guides are not available at MR Vanx site nor can I locate the sticky?
regards,
H
have you read the first page?
cant uprade from spl 1.40 to 2.04
am using hermes 300 and i want to uprade from 1.40 t o 2.40 but i cant do it.i ve tried can anyone help
dania
How to hard reset without win
hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks
majida said:
hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks
Click to expand...
Click to collapse
you should try the hard reset iMate 9502 posts by martin_yo in http://forum.xda-developers.com/showthread.php?t=407336&page=2
Code:
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...
but !!
With many thanks Hakim
But I know hard reset of my phone, I did it many time before, unfortunately it dosen't work this time. I tried all I knew about hard reset. but I couldn't do anything for my phone.
I tried (FN+Green+power like last time I did hard reset easy)(FN+Green+reset button)It don't sho any reaction.
Please help me.
Hi,
Please help me, as its very urgent. I have been upgrading to various ROM's every now and then. Recently I did a blunder, as While upgrading with One of the ROM (Black Majik) i selected SPL 2.10 instead of Force SSPL and while upgrading USB Connection get lost.
Now I am only getting the Splash Screen showing HTC, when i Hard Reset my phone I do not get IPL and SPL version displayed and it takes my to the Splash Screen again.
Please help me in finding a way i can recover my phone.
Thanks in Advance
Regards
Try a hard reset...
If that doesn't work and you have Hard SPL on your phone upgrade using the sd card method.
As for your IPL and SPL, what do you see when you go to bootloader? That shows your IPL & SPL. To get to bootloader press power, OK button next to flywheel and soft reset with stylus. Hold all three buttons until you get to tri-colour screen. That will tell you what IPL & Spl you have.
Cheers...
Thanx for help. I could get my IPL and SPL info. But still i am not been able to get any rom installed on my device as it get stuck on that tri-color screen and rom up gradation wizards comes with different rom looks for activesync connection with the device. I am not been able to boot my device so that i can upgrade it to specific rom. Is there any way i can install a ROM without having active sync connection with the device...
Pl.. Pl.. Pl.. help. I would be greatfull to you
IF you have flashed Hard SPL on your phone you have a good Chance...
If you haven't and its under warranty you might be able to get them to fix for you.
Assuming you have Hard SPLed your phone, try the sd card method - format up to 2gb sd card fat32. copy the .nbh file from the rom upgrade to the sd card.Rename the .nbh file to "hermimg.nbh". Reset phone. As you keep going into bootloader you wont have to manually do that. It should recognize the os flash and prompt you to hit the power button to proceed...
PLEASE NOTE - THIS WILL ONLY WORK IF YOUR SPL IS 2.10 OLIPRO...
Hope you upgraded your SPL cos you will only have a paper weight otherwise..
Best of luck. Cheers...
Hi,
i flashed a rom 2 weeks ago, everything went well. yesterday i wanted to flash another os but before i could flash it, it seemed to get bricked. It stucks on the "HTC Splash" (not the WM6 Splash). I read a lot of threads and wiki threads but i don't unterstand anything! What i've to do to unbrick my phone? I tried to flash another rom but after 0% of flashing a error appears.... flashing with sd card doesn't work, too it changes to bootloader after the "Loading..." screen
i havent got hardspl or something...
please help!
UPDATE: i got the sd flashing to work... same thing but: now it stucks at the WM splash, not the t-mobile/htc one...
You need to find out what SPL you have (I'm guessing 2.03 but if you have 2.10 olipro then its got Hard SPl on it) and then do a search for "bricked SPL x.xx". You will probably find a HEAP of posts. However, some advice that seems to recover a small minority (sometimes with the "No GSM" error) -
1st thing to do is do a hard reset. Both softkeys and reset with stylus. Hold in all buttons until it asks if you want to reset to factory. Press "R" on the slideout keyboard and the "Space".
Hopefully this will fix. If it doesn't, Put it in bootloader, connect to pc (make sure "Allow USB Connection" Active Sync settings have been unticked) and run the SHIPPED STOCK ROM. This is the rom the Hermes came with originally. This MAY fix it otherwise you're in for some major reading and hair pulling.
If you should fix this then PLEASE, for the love of god, Hard SPL your Hermes before going into the wide world of flashing.....
Good Luck...
thanks i'll try it. hard reset causes kinda... nothing^^
i hope i can fix it otherwise i'll buy a touch pro
...but i think it doesn't work, because i flashed a shipped rom via sd card yesterday and the problem is still there... isn't there any way to put hard spl on my device, yet?
Try re-installing the stock rom again using sd card (if thatys how you did it last time), it could've been a bad flash. I've had those a couple of times myself. Just remember to install Hard SPL if you're successful as it makes it SOOOO much easier to recover from bad flashes.
Last thing to check would be if you have "bad blocks" using MTTY. If the boot sector has been stuffed up this may cause this problem. Do a search through the wiki, its been covered extensively...
Cheers...
okay i think my problem is solved: t-mobile replaced my device
first thing i'll do with my new device: HardSPL^^
anyhow thanks!
Upgrade successful but now stuck
I have a Three (au) Dopod 838 pro, which I upgraded from the original Windows Mobile 5 to the Three Windows Mobile 6.0 ROM. Unfortunately I didn't read up on this site first, I thought it would be straightforward since it was a ROM from the manufacturer and all, so I haven't Hard SSPL.
The upgrade reported as successful and my PC disconnected but the phone won't boot, it sticks at the Dopod screen with some numbers at the bottom. They are:
M 05 R 1.47.30.10
S 04 G 32.80.7020.20H
B 07 D 3.54
I have tried hard resetting, and returning the phone to bootloader and reflashing the same new ROM image, always with the same result.
On the bootloader, it says
HERM100
IPL-1.04
HERM100
SPL-2.03
Is there anything which can be done or is it a trip to the service centre (wherever that is)?
Just checking - Hard reset = both soft keys above the dialler closest to the lcd and reset with stylus. Hold in until it asks if you want to reset to factory. Press r on slideout keyboard then space.
This is a hard reset, not just using the stylus.
Otherwise, you have a LOT of reading material to go through with (maybe) no actual solution.
Cheers...
tried that
Thanks, but yes, I had tried that, a number of times. I think the phone will be going to a service centre today.
Hi guys
before, my htc tytn had a problem, it not recognize the gsm sim and no IMEI showed on informations of the PDA.
I supposed that it was a problem of radio rom, and I followed the instructions given on (http://forum.xda-developers.com/showthread.php?t=293665) to unlock and update my radio rom, unfortunately, after the operation began the spl1.60 was downgraded to 1.40.Olipro but can't progress in flashing, the htc hermes SIM CID Unlocker 3.12.3.7 has encountered an 262 (update error), a recovery operation was guided but no result, from this error my htc still showing the three colours screen like below:
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
please help me to restore my phone, there is indispensable for my job to get e-mails
thanks
If you're using XP then update .net framework to 3.5.
Go to activesync settings on pc and untick "Allow USB connection".
Reconnect Hermes to PC, go to bootloader (you need to reset to bootloader, true bootloader, not bricked bootloader). Run RUU_Wrapper.exe again. Should get you out of tricolour screen.
When you finish unlocking the Hermes install Hard SPL V7, go to post 1160, page 116 of this thread for sd card method - http://forum.xda-developers.com/showthread.php?t=296722
Cheers...
???
Thank you for your response but what do you mean by (you need to reset to bootloader, true bootloader, not bricked bootloader).
At the moment you can read the IPL and SPL on your screen, 3 coloured bands running down the screen. This is NOT true bootloader. You need to hold power, ok button above flywheel and reset with the stylus to go to real bootloader. Looks the same but is real and not a cocked up version.
Cheers...
Yes, but when I am doing this, the same screen become to me, with :
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
I suppose that the real bootloader was replaced by the second one from Olipro.
regards.
No, the info you give is right, you upgraded the SPL to 1.40. However, just doing a reset with stylus may bring you to that screen but there may be a fundamental difference in how it flashes the SPL again. You need to do the bootloader reset to make sure that there will be no problems upgrading or you may end up with an unrecoverable brick. It may be fine to use the "bootloader" screen you get with a reset, but its your Hermes you will loose if something goes kaka.... And withot Hard SPL V7, you may not be able to recover it...
Cheers...