just following the Unlock step to do it,
after the unlock programe step 2, that's show the faild to connect and U1000 screen shown nothing ,,,
I try to click step 3 of the unlock programe that's no any response....
now just have the power light on show when I insert the USB cable...
Anyone can help me.???
Pls & TKs
After try cam+reset, the 3 color screen show,
but using the unlock programe also can't reflash my rom,,,
I trying the AP Dual 3.0 to flash the rom...
its showing the percentage but not yet know aftweword...
Lucky,,,, its flashed AP Dual 3.0 ROM
Radio Version:1.16.00.00
Protocol Version: 32.53.7018.01H
ExtROM verison: AP Dual 3.0
Should I know the procedure of flahs rom?
I want to flash the WWE_HTC rom as beginning....
any one can help me? give me some tips for search in forum?
tks very much
Related
Hi Guys,
I've been using the ROM from Michy the R4 edition for some days without experiencing any problem and now it occurs that phone function stoped working for unknown reason ! just like that.
Impossible to enter PIN number the connection manager refuse even to open.
I've tried to install different ROM to see if it could change anything but nothing has changed.
I've also no more description of the RADIO I'am using in the about file.
Please help me to save my lovely brick !
i can help u
hi pal i can help u i also had faced the same problem
ur radio board has been dislocated
pm me to make ur baby alive
u an also contact me on phone at +919823291495 or messenger
at [email protected]
What data you have in BL mode ?
callmelolo said:
Hi Guys,
I've been using the ROM from Michy the R4 edition for some days without experiencing any problem and now it occurs that phone function stoped working for unknown reason ! just like that.
Impossible to enter PIN number the connection manager refuse even to open.
I've tried to install different ROM to see if it could change anything but nothing has changed.
I've also no more description of the RADIO I'am using in the about file.
Please help me to save my lovely brick !
Click to expand...
Click to collapse
Hi
Please download the Michy R4.1 and update it it will work. I had the same problem. My advice is "do not use password or pin while you are testing the new rom"
1. Do a hard reset By Vol Down+ reset hole press
2. Get into boot loader By Camera button pressed + reset hole press until you see the tricolour screen.
3. Then flash R4.1
Good luck
Hi Sabes,
I tried to install the 4.1 Rom and it loaded well. I had the boot screen where nothing was writen after the "R" of radio and then I went to the frist setting screen. It then asked to reboot to customize and since that moment black screen. The power led is on and nothing more...
**** ! it sounds like its definitely dead !
I don't understand anything cos I did nothing wrong, no droping, no tweaks, everything was working fine up to some day the phone function stoped working for unknown reason and now I have a black screen.
I have 1.2.
Boot screen shows : Rom = None
I have managed to reinstall the ROM from Michy the R4.1 version and it powers on again.
The problem remain the same = no phone function
When I get to Device Information I have nothing writen after Radio version and Protocol version.
callmelolo said:
I have 1.2.
Boot screen shows : Rom = None
I have managed to reinstall the ROM from Michy the R4.1 version and it powers on again.
The problem remain the same = no phone function
When I get to Device Information I have nothing writen after Radio version and Protocol version.
Click to expand...
Click to collapse
I have a couple of ideas but I would like you to get into the bootloader screen and tell us what you can see there
I have
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20. Olipro
I've been trying the TTY thing but.... :
start NB image download
Fail to synchronize with the host (1)
callmelolo said:
I have
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20. Olipro
I've been trying the TTY thing but.... :
start NB image download
Fail to synchronize with the host (1)
Click to expand...
Click to collapse
I think you have somehow lost your radio or it has become corrupted
Do you have one of the shipped roms?
Try flashing this as i think it includes a radio
even AP3 may have a radio included in the RUU
Flash this while you are in bootloader.
Or you could flash radio 1.58
I've been trying to flash the 1.58 this morning and I was stuck on 0%
I will get to the wiky and try to download the original Rom for my Athena.
Thanks
callmelolo said:
I've been trying to flash the 1.58 this morning and I was stuck on 0%
I will get to the wiky and try to download the original Rom for my Athena.
Thanks
Click to expand...
Click to collapse
Just a thought
have you removed your sim and sd card?
Yes I did...
Just finished downloaded the original Rom I will keep you posted with the results...
hi all,
i have recieved a hermes with boot loader screen (tri color) when i try to switch it on it goes directly to 2 color screen doesnt go further at all. I've read the sticky thread . As the phone which i have shows on screen the following
HERM100
IPL-1.04
HERM100
SPL-1.40. Olipro
thats it nothing else exept tri color screen so read the sticky threadabout how to unbrick hermes and did following options when i flashed tmobile uk rom it goes further but it stucks at 11% and doesnt go further and when i try to flash a rom which has 1.04 (528420-ruu_hermes_1[1].18.255.3_1.18.255.108_1.03.03.10_qtek_wwe_ship) but it doesnt do anything with phone, it cant even detect the phone and give error straight away can anyone please guide me what should i do further to alive this phone
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
hi no reply but 53 views any mod plz help
WHaT YOU MEAN?
by:
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
---I think your hermes is bricked if you cant upgrade even a stock rom is bricked dude...
For the last thing you could do about it... flash a stock rom like ATT stripped you can find it on the WM6 subforum here on hermes forums... all the chefs put in the main post the link to it... if it doesnt works so... you are screwed up...
be sure ahave this:
Battery at 100% at least 60%
XP pc not vista not wm7 ok?
A nice usb cable and nice USB ports too on the XP pc
Dont run anything till it finish and... dont flash with SIM card and microSD inserted.
Go ahead and post your results again.
hi thanks for your reply i have tried these 2 following roms
HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108 (stucks at 12%)
RUU_Hermes_CINGULAR_WWE_3[1].62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship (stucks at 11%)
with these its not really working anyother thing which u think i should do
br
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
mmmm
Sounds like your batt is almost dead... maybe it shows... 70% but drains to fast is lying to you... or your cable is broken somewhere...
you can DL the stock stripped here
http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
ultramag69 said:
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
Click to expand...
Click to collapse
yes u r right mate my phones radio rom was corrupted and thanks to + Que PPC for providing help and link of the official AT&T WM6 striped rom which turned my phone back to normal but the problem is when i went to device information it says like this
ROM version: 3.62.502.3
ROM date: 10/11/07
Radio version:
Protocol Version:
so radio and protocol versions are blank nothing is there so can u please tell me wt should i do to solve this or its not solvable at all thank you very much indeed to you guys. I really appreciate it
br Sherry
Not solvable... You might like to try running your SHIPPED STOCK Radio Rom, if you know what it is, but there isn't much hope of recovery once the radio goes... Look at it this way, couldn't hurt....
Hello i need to flash my phone as it is in german swisscon but i managed to unlock it now its just german i used USLP and it shows blue-red-green screen wich shows niki100 USLP-4 but what ever software ROM i try to flash in it synces with PC shows the bootloader and then both PC and phone shows Loading bar 0-100% then it just resets and shows me recovery option on PC so no rom cant be flashed, thanks for reading if you know what may couse this please tell me
PS: its ELF Touch Dual niki 100 with 3G camers on front, i want to reflash it to English - its unlocked and can be used with any SIM
Hello!
My phone isn't working with windows mobile although the windows phone 7 and the android works good with my hd2.
The error is this:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
How can i fix it?
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
samsamuel said:
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
Click to expand...
Click to collapse
It didn't worked... but thanks for helping
up
Sounds unusual...
try another original wm rom or a custom rom & recommended spl hspl for the rom & see if works ...
Have you tried task29 or flashing via usb with no SD card loaded ...
White screen
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
jagyugyaerik said:
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
Click to expand...
Click to collapse
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Mister B said:
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Click to expand...
Click to collapse
I dont know exactly, i guess it is unlocked. Thats why i dont know, where can i check it?
TMOUS US is easily identified by T-Mobile logo & green/red call/end keys ...
white screen
It has call keys, but its color are grey, but it dont have T-mobile logo
I had succesfully install a OS (Duttys_Leo_Sense_2.5_5.2.21907.5.0.93_1.80_ML_V4_Ship_PT) from SD card. But still happen the same, after i start the phone it has constant white screen.
unable to flash 3.27 rom on my htc hd2 ........its a t mobile product but unlocked as i use it in india so i tried to flash asia version but it start and completes only 8% thn nothing happens and gives error [262]:which says
UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode
Its goes to the tri color screen where it says upgrade ROM code error Please try again.
Plz help
in download mode it says:
PB81110 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
your device is CID locked which stops none t-mobile roms flashing.
First thing you MUST DO is check what version HD2 you have:
if it has green & red, call/end keys it is the t-mobile USA version (TMOUS) & flashing the wrong radio on that model will result in a bricked device.
if you have standard model with white icons on keys then you will need install HSPL prior to flashing the ROM update, HSPL will bypass CID fixing 262 error ...
HSPL & ROM links for all models including ROM direct download links for TMOUS HD2 can be found in HD2 wiki.
Go look & read it all & be sure you know what you doing before proceeding to flash ...
can u tell me how to unlock cid and can this screen tell me about the rom whether it is 512 or 1024.....
I see you have HSPL already.
are you flashing from computer or trying sd card flash ?
I would also assume it is 512 EU version from details above
try the latest HTC Generic WWE ROM from Wiki section & perhaps try HSPL4 to reflash HSPL as maybe corrupted nand issue. Also do flash from PC via USB cable & make sure PC has activesync or WMDC installed (all can be found in HD2 Wiki)
i m flashing it from my pc as my phone doesnt start when i switch on it stuck on screen saying SOFTWARE UPDATE FAILED PLZ TRY AGAIN......
i tried to flash HSPL4 but it gave me error http://prntscr.com/1stcv1 ......
n also i have WMDC but i doesnt show up my phone but in tri color screen mode it shows usb....
yes it hav 512 rom
Sounds like corrupted nand & model id is perhaps corrupted too.
Try resetting via reset button.
Have a look at these thread:
http://forum.xda-developers.com/showthread.php?t=1001452
http://forum.xda-developers.com/showthread.php?t=1182215&page=2
thanx a lot......just performed task29 and got htc white screen and now can u tell me which rom to flash n can i make it converted to android:good::good::good::good:
First get it fully working on a WM6.5 ROM & test it for 2 or 3 days, then if good look at the Android nand section & look for a Android build you like & has good feedback & current support.
Post 4 above has a link to an HD2 HTC generic WM6.5 ROM but you can choose something else if needed by looking at the ROM links in the HD2 Wiki
xdriver said:
thanx a lot......just performed task29 and got htc white screen and now can u tell me which rom to flash n can i make it converted to android:good::good::good::good:
Click to expand...
Click to collapse
Hello xdriver,
if you want Android on yor phone you mighr opt for installing via NativeSD method, giving you the advantage of trying out different builds and choosing the one that suits your needs at best. Also, if somwthing goes wrong you always have WM fully functional on NAND. But consider buying a decent SD card first, meaning one with exceptional good random r/w access speed. You'll find tutorials in the SD section.
Have fun!
Best regards
Getrid…
Sent from my HTC HD2 using xda app-developers app
thnx 4 the info frnds but after doing task29 thn also it stuck at 8% and give same error stated in post #1 and now my phone doesnt start up when i switch it on it vibrates for 3-4 secs n nothing happen after i tried to flash wwe asia india ROM ............... maybe it is battery problem now i charging it to check the prob...........
its getting into the bootloader mode now i m download a lower version of ROM .......Hope it works