Hello i need to flash my phone as it is in german swisscon but i managed to unlock it now its just german i used USLP and it shows blue-red-green screen wich shows niki100 USLP-4 but what ever software ROM i try to flash in it synces with PC shows the bootloader and then both PC and phone shows Loading bar 0-100% then it just resets and shows me recovery option on PC so no rom cant be flashed, thanks for reading if you know what may couse this please tell me
PS: its ELF Touch Dual niki 100 with 3G camers on front, i want to reflash it to English - its unlocked and can be used with any SIM
Related
Hy to all! I received an T-Mobile MDA Touch Plus in boot mode(ticolor bar with ruunbh and niki200, spl-1.16.0000, cpld4) and i try to flash with original t-mobile rom "tmobile_mda_touch_plus_2.06.111.2.exe". The flash process is stoped to 42% and now niki200 is still in boot mode but with spl-1.22.0000 and only "serial" on the screen! I can not boot again and i tryed to use MTTY but i received always message "USB port can not open"! how can i boot again this device? Thanks to all!
Please htc developers i need ur help .niki200
I have same problem here after trying to flash my htc niki200 it get to 99% and it stop now phone is in three color and i can flash it with any rom . I have to revive this phone for my customer .
Please i need ur help
Hi,
I'm having problems with my niki100. When I power it up, it stucks in the second screen with the red letters at the bottom giving the radio version and other data.
The problem started after flashing a new rom:
PTG cleanblack wm 6.5 "showthread.php?t=689898"
Before installing this rom I was tring the ROM from Dj_series VA11, but there were some problems to get the phone to work, it was going to offline mode not setting up the connection to the mobile operator. Befrore changing any rom I've done the hardspl 1.22.
Now it's not working, I've done a hardreset, but it's the same, I can´t get active sync to work in order to do some flashing, I tried to enter to bootloader pressing camera and power button, the 3 color menu says USB when connecting the usb cable but on the labtop theres no port associated in device manager and no possible communication between niki and PC.
Any help would be thankfull..
Problem solved !
I've tried to flash it again through sd card with the same rom and the problem remain. After that I've changed the image on the sd card to the previous version (Dj series) , renamed the image on sd, camera*rst* and power button simultaneous, flash from sd and it went ok.
It's working now !
Thanks anyway
hello
can you please help me, my dual is on the same status as yours but i dont have SD :s but he goes to Bootloader and when i try to update erro ID Vendor, if i try to HDspl ou sspl the same erro..
can anyone help please..
OK, so I tried to install nand android on my htc hd2 and firstly I installed hspl 3 on it then as instructions said I updated ROM version to MAGLDR ... And now phone is frozen right after I turn it on it only shows me O2 welcome message. Please don't tell me that it is coz the phone is locked to o2 network because there r so many threads and no one mentioned that u can't install android if the phone is locked or I missed something SO any help pls? I am freaking out that my phone is dead.
RAM 512
ALso:
When I press a red button near the sim card while holding volume down and it shows 3 colour screen and connect it to the pc , pc does make a sound as phone was recognised but it doesnt come up with any windows or anything that I could see that phone is there.. Is there any way I can install old rom or smthing to get my poor phone back, please help me, I am not experienced in this at all and first attempt failed
Put the phone into BootLoader mode. At the bottom of the screen you will see 'Serial'. Now plug it into your computer and the 'Serial' changes to 'USB' - you have made a good connection to the computer. The computer doesn't recognise it as a phone, because the phone firmware has not been booted up, so don't wory about it.
Run the O2 ROM form the computer. One of the conditions is that you have made an ActiveSync connection, just tick the box and proceed.
Once the ROM has flashed, it is advised to do a hard reset, but I have never had a problem not doing it.
Now you are back to the begining.
You are getting a little mixed up between Operator (SIM) Locked and Firmware Locked. They are independant of each other. You can SIM unlock your phone, which means you can use any telecom's SIM card in your phone even though the phone boots up with an O2 logo. You can unlock the firmware (HSPL) so that you can use the stock HTC ROM (not the 3.14 version) or one of the excellant custom ROMs, now the phone won't show any of the O2 stuff but you are still limited to using O2 SIM cards.
Now you have to Run HSPL2 and select the SPL 2.08.HSPL. Since you want to run Android NAND you have to flash a .50 RADIO - try the 2.15.50.14 RADIO.
I would have a real good read * HERE *. And if you want to go ahead, the read it again.
Hi i have 1 hermes Spv m3100 and phone when comes to me was on and need to unlock network code
i do unlock using HTC_Hermes_SIM_CID_Unlock_v3 unlocker
in the half of flashing my pc goes off
and phone cant flash now.
i cant do HSPL for write any rom .so i need to flash official rom but i cant find that.
Now phone can go in bootloader mode but cant turn on fully and hang on windows logo.
When i go in bootloader is same this
HERM100
IPL-1.00
HERM100
SPL-1.11
Phone is ORANGE and come from UK
Now what shall i DO?
hamed_karamouz said:
Hi i have 1 hermes Spv m3100 and phone when comes to me was on and need to unlock network code
i do unlock using HTC_Hermes_SIM_CID_Unlock_v3 unlocker
in the half of flashing my pc goes off
and phone cant flash now.
i cant do HSPL for write any rom .so i need to flash official rom but i cant find that.
Now phone can go in bootloader mode but cant turn on fully and hang on windows logo.
When i go in bootloader is same this
HERM100
IPL-1.00
HERM100
SPL-1.11
Phone is ORANGE and come from UK
Now what shall i DO?
Click to expand...
Click to collapse
you must hard reset device and try to Flash ROM again ,,,
for official Rom you can get in http://www.shipped-roms.com/index.php?category=windows mobile&model=Hermes
Tnx to replay
i had tested before hard and soft reser but nothing
I also try many rom from there and all of them have a Invalid Vender ID error
I tested these file
Code:
SPV_M3100_ROMUpdate_1007.exe
SPV_M3100_ROMUpdate_0407.exe
RUU_Hermes_O2_UK_3.62.206.2_6275_1.50.00.00_108_Ship(3).exe
HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe
But still same
In first step of turning on phone wrote NO GSM and fast disappear
Why no answer?
Can we hspl phone when phone is in bootloader mode?
hamed_karamouz said:
Why no answer?
Can we hspl phone when phone is in bootloader mode?
Click to expand...
Click to collapse
could of course , why not ...??
you live connect to a usb synchronization and Flash ROM by clicking hspl.batch
finished it! {All of it depends on understanding and Your lucky}
I am using this Hard-SPL-V7
But it cant find device
The Update Utility cannot connect to your PDA
But when i have flash rom it flashed and come out of flash in 1% and invalid id error
and i cant do Hspl using MMC always this error
00068002
Hello!
My phone isn't working with windows mobile although the windows phone 7 and the android works good with my hd2.
The error is this:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
How can i fix it?
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
samsamuel said:
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
Click to expand...
Click to collapse
It didn't worked... but thanks for helping
up
Sounds unusual...
try another original wm rom or a custom rom & recommended spl hspl for the rom & see if works ...
Have you tried task29 or flashing via usb with no SD card loaded ...
White screen
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
jagyugyaerik said:
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
Click to expand...
Click to collapse
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Mister B said:
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Click to expand...
Click to collapse
I dont know exactly, i guess it is unlocked. Thats why i dont know, where can i check it?
TMOUS US is easily identified by T-Mobile logo & green/red call/end keys ...
white screen
It has call keys, but its color are grey, but it dont have T-mobile logo
I had succesfully install a OS (Duttys_Leo_Sense_2.5_5.2.21907.5.0.93_1.80_ML_V4_Ship_PT) from SD card. But still happen the same, after i start the phone it has constant white screen.