Hy to all! I received an T-Mobile MDA Touch Plus in boot mode(ticolor bar with ruunbh and niki200, spl-1.16.0000, cpld4) and i try to flash with original t-mobile rom "tmobile_mda_touch_plus_2.06.111.2.exe". The flash process is stoped to 42% and now niki200 is still in boot mode but with spl-1.22.0000 and only "serial" on the screen! I can not boot again and i tryed to use MTTY but i received always message "USB port can not open"! how can i boot again this device? Thanks to all!
Please htc developers i need ur help .niki200
I have same problem here after trying to flash my htc niki200 it get to 99% and it stop now phone is in three color and i can flash it with any rom . I have to revive this phone for my customer .
Please i need ur help
Related
hi i had shaps wm6 installed , and then tried to upgrade my radio , it went to 2 % then came back with a error messege , my phone is now stuck in bootloader , any fixes?
in bootloader it says herm300
IPL-1.04
SPL-2.10.0ipro
solved it useing hard flash , thanks !
flashed phone with the lasest unlocker software , but now all i get is the htc smart mobility splash screen ?
mda herm300 it only shows t-mobile screen
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
Have you tried:
- Hard Reset
- Reflashing
- Rerunning the unlocker
- Mtty task 28
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
The forum is NOT for ASKING for help. The forum is FOR reading and then asking...
Recovered From Stuck on Bootloader & Splash Screen
Hi,
I had the same problem (1st stuck on bootloader- reflashed custom ROM then Stuck On Splash Screen with no GSM) on my SPV M3100 after a failed radio upgrade first it was stuck in bootloader for the longest time while i searched and re-tried uprading the radio rom inbetween using recover tools like mitty.exe and NBHextract but nothing happend until i had a brainstorm i had previosly downloaded an original vendors ROM for the Hermes so i flashed it and Pow Pow Pow - Radio and Software Rom back to normal and working OK!!!
During th eflash of my rom radio with 1.54.00.10 the program stopped and my mobile restart in bootloader.
The problem is that the flash program doesn't want to restart flashing and my mobile stay on bootloader menu.
HELPPPPP Please..
What do you mean by "the flash program doesn't want to restart flashing"
Did you try to flash your original shipped ROM entirely to the device?
What is IPL/SPL on your device?
Sorry for my english...
I flashed with RUUWrapper.exe on my PC with usb connection but during the verification the soft said me error 260 the device not connect.
Is there a possibility to flash the rom radio without PC, directly on my mobile ?
Thanks
on the bootloader screen :
HERM200
IPL-1.04
HERM200
SPL-2.03
Looks like the FLASHING TOOL is not compatible to your device! What OPERATING SYSTEM are you using?
I am not sure if your device is already CID unlocked?
If you run on XP and your device is CID unlocked use the CustomRUU (search the forum), if not: read the WIKI!
My device is unlocked and I use wwindows XP
How can I flash with serial?
this is what you get for not flashing Hard-SPL. idiot
I'm ok but how can I do?
please...
HELLLP (ive been upgrading since the xda II) and i recently got a tmobile hermes with wm5! then got wm6 upgraded it and got to about 78% and my pc died and then i tryed recovery did not work had to go to work so i left it! got back and ive tryed so many more upgrades of the image with no luck its stuck on splash screen! ive placed it into bootloader mode then ran ruu wrapper and it gets to the bit of updrading (25mins and a progress bar) and the phone goes white with upgrading image 0% then on the pc i get error 262!! and thats as far as i got please can some1 help thankyou so much
here is all my information that ive got!
bootloader mode = herm300 IPL -1.01 (in white text)
Herm300 SPL - 1.04 (yellow text)
when i restart the phone and its stuck on bootloader mode this is the info
m 05 - r 1.05.05.00
s 04 g 32.36.7010.04h
b 06 d 3.62
please can u ask as many people as you can ive known about this since the xda II days but never needed help and i know some1 can help this is a great website and forum thanks
I have a Niki100 that can't boot, it stops in the screen that shows "smart mobility" and at the bottom the info in red letters.
Here he shows
M 04
B 04
R 1.58.16.27
G 25.61.30.03H
D 1.31
I can boot it to the 3 colors screen, when connec't the cable at the white stripe it changes from serial to usb, but can't flash any rom it stops at 0% with error! At this screen it shows:
niki100
SPL-1.16.0000
CPLD-4
Already tried several official rom's some gives me ID error because it's locked to vodafone, but also tried an Vodafone spanish rom and got update error.
From the versions it's something wrong? It's not my pda I'm used to work with an Prophet, I don't know niki's spl, hard spl, etc... stuff...
Can anyone help?
Do a hard reset, if it boots then do hardspl and after flash rom of your choice.
Still the same! This is a rom problem...
Have you read any of the threads about flashing????; you have to HardSpl first your device before anything else, then the CID Unlock and then you can flash any ROM; (I recomend HardSpl 1.22)
I've the same issue ...
I've "hardspl" my device before ... but now no access at all to the device
it's stock on the HTC logo...
I can't go to the rainbow boot ... the PC don't see it
help please
carlosmozas said:
Have you read any of the threads about flashing????; you have to HardSpl first your device before anything else, then the CID Unlock and then you can flash any ROM; (I recomend HardSpl 1.22)
Click to expand...
Click to collapse
I get the pda already at this state... I didn't do anything yet to him!
I too have the same issue
I too tried many options... nothing working....
Still i have an option left, i heard that you can boot ROM from SD Card, this may help us to proceed further(avoid boot issues)... Let me try and update you
marciton said:
I've the same issue ...
I've "hardspl" my device before ... but now no access at all to the device
it's stock on the HTC logo...
I can't go to the rainbow boot ... the PC don't see it
help please
Click to expand...
Click to collapse
Already try the sd method and some roms tells wrong vendor other (Vodafone) just stays at "loading..."
No boot, the device is hung, no way out ...
marciton said:
I've the same issue ...
I've "hardspl" my device before ... but now no access at all to the device
it's stock on the HTC logo...
I can't go to the rainbow boot ... the PC don't see it
help please
Click to expand...
Click to collapse
I have the same issue:
after I have flashed new Insomnia 3.01 ROM,
the phone will not install any software first and than freezed.
After I have take the battery out and put it on again,
device has stopped responding and boots no more, shows HTC Logo with
radio version etc.
Could anybody help me?
Okay guy's, I'm not sure if this will help you or you already tried but read this http://forum.xda-developers.com/showthread.php?p=2183617 maybe this will help.
Wish you all GOODLUCK
Hello i need to flash my phone as it is in german swisscon but i managed to unlock it now its just german i used USLP and it shows blue-red-green screen wich shows niki100 USLP-4 but what ever software ROM i try to flash in it synces with PC shows the bootloader and then both PC and phone shows Loading bar 0-100% then it just resets and shows me recovery option on PC so no rom cant be flashed, thanks for reading if you know what may couse this please tell me
PS: its ELF Touch Dual niki 100 with 3G camers on front, i want to reflash it to English - its unlocked and can be used with any SIM
Hi i have 1 hermes Spv m3100 and phone when comes to me was on and need to unlock network code
i do unlock using HTC_Hermes_SIM_CID_Unlock_v3 unlocker
in the half of flashing my pc goes off
and phone cant flash now.
i cant do HSPL for write any rom .so i need to flash official rom but i cant find that.
Now phone can go in bootloader mode but cant turn on fully and hang on windows logo.
When i go in bootloader is same this
HERM100
IPL-1.00
HERM100
SPL-1.11
Phone is ORANGE and come from UK
Now what shall i DO?
hamed_karamouz said:
Hi i have 1 hermes Spv m3100 and phone when comes to me was on and need to unlock network code
i do unlock using HTC_Hermes_SIM_CID_Unlock_v3 unlocker
in the half of flashing my pc goes off
and phone cant flash now.
i cant do HSPL for write any rom .so i need to flash official rom but i cant find that.
Now phone can go in bootloader mode but cant turn on fully and hang on windows logo.
When i go in bootloader is same this
HERM100
IPL-1.00
HERM100
SPL-1.11
Phone is ORANGE and come from UK
Now what shall i DO?
Click to expand...
Click to collapse
you must hard reset device and try to Flash ROM again ,,,
for official Rom you can get in http://www.shipped-roms.com/index.php?category=windows mobile&model=Hermes
Tnx to replay
i had tested before hard and soft reser but nothing
I also try many rom from there and all of them have a Invalid Vender ID error
I tested these file
Code:
SPV_M3100_ROMUpdate_1007.exe
SPV_M3100_ROMUpdate_0407.exe
RUU_Hermes_O2_UK_3.62.206.2_6275_1.50.00.00_108_Ship(3).exe
HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe
But still same
In first step of turning on phone wrote NO GSM and fast disappear
Why no answer?
Can we hspl phone when phone is in bootloader mode?
hamed_karamouz said:
Why no answer?
Can we hspl phone when phone is in bootloader mode?
Click to expand...
Click to collapse
could of course , why not ...??
you live connect to a usb synchronization and Flash ROM by clicking hspl.batch
finished it! {All of it depends on understanding and Your lucky}
I am using this Hard-SPL-V7
But it cant find device
The Update Utility cannot connect to your PDA
But when i have flash rom it flashed and come out of flash in 1% and invalid id error
and i cant do Hspl using MMC always this error
00068002