Related
I have asked around before about getting the WM6 VoIP on this bad boy, and no one seems interested. The standard Cab files will not work, and it has been speculated this is because of some missing certificate files.
I know there are few out there with other devices that have the 6800 as well, and we can compare the certificate files between the two devices to see if we can get this working.
Certificate bypass...
Have you tried "unlocking" the certificate requirements through the registry?
The settings are available on the HTC WIKI here: http://www.htcwiki.com/page/P4000+Telus?t=anon and will allow programs/cabs to be installed regardless of certificate authentication. Bear in mind, this is NOT a method of unlocking the phone for another network, simply a means to dismiss certificate requirements for program installation.
I'm not interested in the VOIP per se, but if the certificate is the problem, this might be a viable solution... I hope it helps.
Yes I have unlocked the phone. As said its only sepeculated its a certificate issue. After installing the WM6 Voip cab file, all files that are recommended you check for, are there, but the phone does not give you the option to select internet calling.
I have tried it too cannot get the today plugin to show....
internet calling just doesn't show up
webdude12 said:
Yes I have unlocked the phone. As said its only sepeculated its a certificate issue. After installing the WM6 Voip cab file, all files that are recommended you check for, are there, but the phone does not give you the option to select internet calling.
Click to expand...
Click to collapse
all files installed, internet calling checked in today's settings, but doesn't appear on today's screen.
does anyone knows what's wrong with ppc6800?
Does anyone have another WM6 device that they have the VoIP Client working on. I think the key maybe a missing Registery setting, but dont have another device to compare too.
Look in this key:
\registry\HKLM\SOFTWARE\OEM\PhoneSetting\
I am guessing for something along the lines of: HiddenInternetPhone or HiddenVoip with a value of 0.
No "Internet Calling" on HTC P4000 (Telus)
I have the same problem. I installed WM6VoIP.CAB and SetupVoIP_v0.3.CAB, and setup access to the voip provider sip server (voipbuster.com). I was logged into voipbuster on my laptop, and as soon as I clicked ok from the "Setup VOIP" page, I received a message on my laptop indicating that I've been logged out of voipbuster because I have logged in from another computer. So, this means that Internet Calling is indeed working (or at least connected to the voip sip server), but just doesn't show up on the Today screen. I can see the "Internet Calling" option in Settings > Today > Items page, but "Internet Calling" does not appear in the Today page. It may be hidden or missing due to a registry key as the previous poster suggests. I have no idea what that key would be, but if anybody could look and see if you can find anything that would ShowInternetCalling, HideInternetCalling, or something similar in the registry, that would be much appreciated. Thanks.
VOIP works with no Internet Calling on Today Screen
I have an HTC P4000 (Titan, PPC6800) on the Telus network. And by installing WM6VoIP.CAB and SetupVoIP_v0.3.CAB, I was able to go into the SetupVoIP app and on the last tap, set it to "Whenver Available." This causes VOIP to become active if there is a WiFi connection. Nothing shows up on the Today Screen, but in the Phone screen, TELUS changes to VOIP (or whatever you name the SIP connection). After that, all calls are being routed through the voip provider.
The volume of the rear speaker (and earpiece when connected) is rather low, but definitely audible. That's the last piece of the puzzle I have to figure out.
Now Working, just a few bugs
Ok I’ve got the WM6 sip client working on my phone (telus-p4000) the same way with all the same problems as sabrex does. I’ve tried many voip clients on this phone with the same speaker problem, I’ve read some where that the HTC api doesn’t reference how to access the earpiece speaker on the p4000. Believe me these other voip clients work on almost every phone with proper speaker output, it’s just the p4000 that routes the sound to the rear speaker. So what it looks like is the sip extension to the phone software is trying to use the default wm6 routing path there by pushing all the audio to the rear speaker instead of the earpiece. Now a work around like sabrex said is to use the corded external earpiece. I haven’t been able to get any Bluetooth headsets to work on any of the other voip clients but maybe someone will have better luck with the wm6 client. I don’t know much about sound routing in wm6 but any help with a direction to look in would be appreciated, but I think HTC will be the only ones capable of helping with this.
sabrex said:
I have an HTC P4000 (Titan, PPC6800) on the Telus network. And by installing WM6VoIP.CAB and SetupVoIP_v0.3.CAB, I was able to go into the SetupVoIP app and on the last tap, set it to "Whenver Available." This causes VOIP to become active if there is a WiFi connection. Nothing shows up on the Today Screen, but in the Phone screen, TELUS changes to VOIP (or whatever you name the SIP connection). After that, all calls are being routed through the voip provider.
The volume of the rear speaker (and earpiece when connected) is rather low, but definitely audible. That's the last piece of the puzzle I have to figure out.
Click to expand...
Click to collapse
Has anyone been able to get the Today screen plugin to work with the P4000?
Hi All
Can anyone tell me where i can get hold of SetupVoIP_v0.3.CAB ?? Many Thanks!!
Where to get SetupVoIP
Found it here:
http://forum.xda-developers.com/showthread.php?p=1486120
This with WM6VoIP.CAB got it working on my Bell HTC-6800 (HTC Mogul / Titan). It's a user-contrib setup program that handles files and registry settings. Doesn't show on today screen, but it does redirect my phone to SIP when WiFi is available.
I've heard mention of a newer WM6VoIP.CAB, but I can't find it. The setup I have working puts audio through the back speaker, and from what I've read will be prone to very quiet audio.
Can you tell me how to di it from scratch? New Phone
i just got my Bell HTC-6800
Do I need to unlock it some how for this to work?
I have tried installing WM6VoIP.CAB and using SetupVoIP_v0.3.CAB to no avail.
Please post details of "no avail". How far did you get, any error messages?
Did you configure SIP using SetupVoIP?
- use Start / Programs / Setup VoIP?
- docs / support here
- did you set options to "whenever available", or "only if cell is not available"?
Which SIP provider are you using?
Are you using 802.11? Browser works?
When you view the phone screen, does the top left show VoIP (vs Bell Mobility)?
The Today screen doesn't work on my 6800, and I don't know how to solve it. I can place and receive calls, but the received audio is very quiet and comes through the handsfree (back) speaker. Headset is also very quiet (both wired and bluetooth). But when I'm at our remote mining areas I can place and receive calls.
Are you experienced with VoIP in general, and SIP in particular?
The whole story is in this very long thread:
http://forum.xda-developers.com/showthread.php?p=1590688#post1590688
got it working on bell 6800
gadzuk said:
Found it here:
http://forum.xda-developers.com/showthread.php?p=1486120
This with WM6VoIP.CAB got it working on my Bell HTC-6800 (HTC Mogul / Titan). It's a user-contrib setup program that handles files and registry settings. Doesn't show on today screen, but it does redirect my phone to SIP when WiFi is available.
I've heard mention of a newer WM6VoIP.CAB, but I can't find it. The setup I have working puts audio through the back speaker, and from what I've read will be prone to very quiet audio.
Click to expand...
Click to collapse
thanks for all the info here guys, i was able to get it working today on a bell 6800. im disappointed in the sound and features though. i have a nokia E70 and i use it's built in sip client which works will all the features of my asterisk PBX. i hope that this software will continue to improve.
Hi folks,
anyone managed to fix the audio problem on Titan ( P4000)
I get audio from the back speaher only
Thanks
back speaker audio
this is what i heard about the problem
Apparently HTC does not use standard Windows Mobile Audio paths on their devices as opposed to some of the other device manufactures.
This is word for word from HTC:
“It works on most other Windows Mobile devices because they more than likely use Microsoft standard audio path controls, HTC uses their own software architecture which is why it doesn't perform the same.”
Well, that sucks ...
They supply 80% of PDA phones to the market
and there is no work around it ?
My question, why is the sound quiet? Any other application that would put sound out would be normal volume. Why is the VoIP quiet then??
AGEphone Mobile 2 Speakerphone Edition does support the internal speaker on some select models (more to follow!) as of now!
Hi,
I recently picked up a SoftBank X01HT and was really looking forward to trying out the video calling using the built-in HTC Video telephony app, Skype, or something else, but no luck.
It seems like there is only one way to get it working, and is to pay for the service from my carrier (Fido), except they don't offer it.
Is there an other way to get the video telephony working over HSDPA using some sort of hack of the registry, or other SIP-based application?
Thanks in advance,
Victor
bump......
Hello all. Before tweaking to DCD 3.1.2, Voice command would announce incoming messages and callers. Now, with dcd, the actual ringtone is played over bluetooth headset and no announcments are made. any thoughts on how to eliminate ringtone being played over bluetooth and have announcments made again? Thanks folks. You guys rock!
mine acts different...i get ringtone in my headset and it announces who calls over ringtone in my headset, also my phone vibrates but doesnt ring.
i wish there was an easy way to configure the settings cuz i would like for my phone to vibrate and ring out loud (im not always wearing my bt headset 24/7 when bt is enabled) and i want my headset to announce so and so is caling or the number if its not in my phonebook.
i also notice when in a call it announces who is calling in for call waiting which is cool
Ring and voice command
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Click to expand...
Click to collapse
First of all, dcd's roms are meant to be cooked clean. That's why UC compatibility was added. Lots of people got excited when it was first added, but I've seen very very few people actually utilize it the way it's supposed to. Before I go on I have to ask...are you cooking your own rom using the kitchen, or are you using the precooked rom that is posted? If you're using the latter, then NOTHING besides the essential functions will be installed. It's a clean precooked rom and nothing else.
That being said, if you're cooking your own rom with the kitchen, there's a few things you should know...
Voice Command does not come stock with the phone. It's a third party application from Microsoft that costs roughly $40. There isn't an option for it in BuildOS, so unless you have it and you're installing it via a cab (the way I recommend), or through an OEM, then you will not see any options for it, as it is not installed. If you're referring to Voice Speed Dialer, that's a whole different program. There are no options for it. You have to manually record yourself speaking the commands.
Sliding Sound has to be added using BuildOS. If you're not checking it off prior to cooking the rom, then it will not be included in your rom.
I don't use MSN messenger, but I'm going to guess that Windows Live is what you're looking for? If so, Windows Live also has to be added using BuildOS.
I'm not sure what you mean when you say "Finish the GPS settings". Could you clarify?
As far as your personal settings tab goes, that is a valid problem and we would have to speak further in detail for me to diagnose it.
MS Voice Command: Definitive Guide Thread...
http://forum.xda-developers.com/showthread.php?t=391262
P.S. had the same problem, got the 1.6.19209 version listed in that thread, now voice command talks right over the ring tone and I get the best of both worlds.
i dont use voice command really, but i noticed after the update that my phone no longer physically shows the contact or number of whos calling when my phone rings.
It just says
Verizon Wireless
Incomming Call
Then the rest of the box is blank.
Anyone know how to fix this? I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
Click to expand...
Click to collapse
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
ROM requires a carrier cab:
Alltel
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
Click to expand...
Click to collapse
voice command and ringer volume
gcincotta said:
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
Click to expand...
Click to collapse
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
I personally do not use Microsoft Voice Command anymore.
The reason is that it uses a lot of resources on my phone.
I did several customizations on my phone and have several apps installed and I roughly get 24 to 25 mb at startup. With voice command I get around 19 to 20.
I just rather use Voice Speed Dial that is in DCD's Kitchens. Yes you would have to program your voice to recognize the commands, but it does what I need it to do and it saves a lot of memory.
findthisfunny said:
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
Click to expand...
Click to collapse
I have been using VC with all of DCD's ROMS and have not had a problem. I bought the package a while back but found an OEM that I use now. I works great when it does figure out what I am saying. LOL
I don't have any issues with setting the ringer by VC and then by stylus. I also don't have any issues using it through my BT headset. Make sure you have the right settings in the settings control panel with the icond Voice Command. Check out the options and notifications for each of the checked items. There was also a set of files to fix something a while back I have posted them here but you should do the search to find out what they fixed.
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/124054481/destr0_VOIP_WM61___SIP_Config_1.1.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
destr0 said:
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/123650406/destr0_VOIP_WM61___SIP_Config.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
Click to expand...
Click to collapse
Nice work, will test now.
Been a while since ive seen a single cab for the drivers and SIP config tool (thx shaun33).
EDIT:: fired the cab up in WM6 emulator device and the dll loads up nicely, sip config tool is there. Internet Calling today item shows up and the Internet tab appears in phone settings. Its good stuff....didnt need a soft reset either.
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
destr0 said:
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
Click to expand...
Click to collapse
Hi destr0, just installed on Kaiser (TyTN_II) with HyperDragon IIIm ROM (WM 6.1 "lite"). Registered and running to my VoIP provider like a charm.
Tomorrow I'll use/test it heavily at work (where we have an asterisk/sip as internal phone system)...
Thanks a lot for your sharing.
Dude,
Its awsome to see that that app is still kicking.
If you can think of any upgrades that would make it easier to intergrate with your cab shoot me a PM or catch me in the IRC chan.
Everything seems to be working ok on my AT&T Tilt 8925, but i dunno what to put for sip server and such. Tried going to tools, load config, from device and that brings up an error every time.
daigoro64, I have an asterisk server at work and even with it, calls go out through the wifi and reach the destination phone.
yusuke14, you have to create yourself a VOIP account. There are many providers, I personally use three from betamax: www.voipbuster.com, www.justvoip.com and www.intervoip.com. You can look at theis fares here: http://backsla.sh/betamax
Shaun33, of course your app still rocks! many thanks for it. I suggest you could have a list of sip servers in a dropdown box to be easier to configure for the first time
Good work destr0. I keep it for next NiAx's Rom.
NiAx.Team
You listen from your external speaker or internal ? like normal call ?
John_A said:
You listen from your external speaker or internal ? like normal call ?
Click to expand...
Click to collapse
from the internal, like a normal call
Thanks a lot .... I try it now with my asterisk
Can´t wait to try it, nice work
Great work man..Keep it up
Here is an OEM for It :http://rapidshare.com/files/123749980/OEM_VOIP.rar
A big thank you for a great job.
Gracias
destr0 said:
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/123650406/destr0_VOIP_WM61___SIP_Config.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
Click to expand...
Click to collapse
I have an Elfin (HTC Touch) with the latest rom 19949.1.2 installed. Sound comes from the external speaker and mic is not working. This might be caused by the latest rom. Other Elf\Elfin user tried to install Voip for wm6.1?
jmmertens said:
I have an Elfin (HTC Touch) with the latest rom 19949.1.2 installed. Sound comes from the external speaker and mic is not working. This might be caused by the latest rom. Other Elf\Elfin user tried to install Voip for wm6.1?
Click to expand...
Click to collapse
Can anyone confirm it uses the external speaker in the Elfin?
In my TYTN (build 19949.1.2) and Trinity (build 19213) uses the internal one
very good efforts. Wow!
destr0 said:
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
Click to expand...
Click to collapse
--> Will it work on mi P3300 (Artemis) running WM5 ??
tried it but doesn't work here.
Incoming calls: after answering with green button other party still hears the tone as if i didn't pick up.
Outgoing calls: can't hear other party
this was tested over 3G. Haven't tested over wifi.
I was wondering if the radio version could be the cause of my phone not receiving the voice mail notifications? It shows on the front when i get a voice mail but it doesn't say new voice mail above it, it has a V looking thing above it. Nothing shows in my notifications so I cant clear off the new voice mail symbol at the top of my phone even after i check the voice mail and make sure I have no new voice mails. Anyone have an idea how to fix this problem? Thanks for help with all my stupid problems and questions.
VoiceMail
hello, I was just wondering if anyone has any idea why voicemail notifications will not clear. I have unlocked my cingular 3125 and flashed the ROM to WM 6.1. I have no voicemails and it still says there is a new voice message. I have two carriers a local and ATT. Both my cingular 3125 phones are unlocked but whatever phone my local sim card is in tells me there is a new voice message. any ideas?