Related
I have downloadet ATHE_wm6_x7500.zip file from another threat.
Is there anything that I should think of before I'l go on?
I know I need to take backup first.
But anything else?
And 2 more thing.
I know 3g talk is not working on wm6. Is there something else problem with it?
And is there possible to install the public release when it is released? (after I have installed this version)
Edit: Sorry for bad language.
I'm from Norway. And I spent to little time in my class
Before flashing your device:
Is it sim-unlocked and superCID ?
what is sim-unlocked and sid unlocked?
The phone is bought without simcard og something.
I can use whatever simcard I want
First Unlock
You will first want to download and install the program in this thread http://forum.xda-developers.com/showthread.php?t=315831. Make sure you read all the instructions and understand exactly what you will be doing. Then your phone will be ready to install WM6
I have read the post now.
Do I need to whatch the movie? Or is the steps readable from the exe fil when running it?
I'm in linux now and can't check the exe before rebooting.
Thanks for helping me
The steps are readable during the install but since you might not feel comfortable with english you can watch the video which always helps.
Thanks for the help. Read english is no problem. I'm just bad at writing it
First do the unlock program.
And then go for the rom file that I have mentions in first post?
Thanks again for the help
It failed after step 2. Black screen and nothing is working.
I got no error on step 1.
I have tryed to use cam button and reset to get it in debug?
And I get many colors and some info about firmware.
And there is standing USB.
Others are talking about a loading screen. Where can I find that?
Iminzilion said:
It failed after step 2. Black screen and nothing is working. I got no error on step 1.
I have tryed to use cam button and reset to get it in debug? And I get many colors and some info about firmware.
Click to expand...
Click to collapse
That multi-color screen sounds like the bootloader. Assuming you are now super CID (not sure because your message doesn't say what the "some info" is), you simply establish a USB connection between a PC and your 7500, download the WM6 ROM on to your PC, and execute it. This was exactly my experience (just got to step 1, black screen on step 2). Lot of posts on this, so make sure you do your research before proceeding. Hope this helps, and good luck.
thanks. love it. JUST LOVE IT.
I have fixed it before you posted. mmmm.
(l)
happy
Hi Jiggs,
Really really need your help...
I've accidentally flashed my O2 atom life to a wrong rom, and it was recovered by a rom named AL1.DIO & ExRom.img which downloaded from xda FTP sites.
The rom was recovered,however for the warranty reason i need to flash back to O2 original firmware. And when try to flash to it I encountered "Wrong Customer ID", can you advise how to bypass the CID check and flash to original ROM?
I've tried on the post stated on http://forum.xda-developers.com/showthread.php?t=293632 but the screen didn't show anything after execute the .exe file.
I do not wish to unlock the CID just intend to bypass it, can you enlightened me?
Your help is greatly appreciated.....
First off sounds like you have some idea what you're doing? (bootloader working?)
Secondly there is no jiggs anymore, he's gone, retired, moved on!
Last but not least he left a torrent of info in the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Atom start here and read, you may find a solution! good luck bro!
homer285 said:
First off sounds like you have some idea what you're doing? (bootloader working?)
Secondly there is no jiggs anymore, he's gone, retired, moved on!
Last but not least he left a torrent of info in the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Atom start here and read, you may find a solution! good luck bro!
Click to expand...
Click to collapse
Hi bro,
Thanks for the quick reply.
I'm so sorry I'm a newbie didn't know bout Jiggs already retired
Btw I still manag boot into bootloader, the problem is due to the warranty reason, i need to dump my atom life back to its original state before i send in.
Now I'm still able to use the phone, it's just not in original rom.
Had tried to look around the thread you post to me, but i couldn't find any solution at all. Sigh, hope that someone can englighten me as i totally lost...
so you get the "CID error", whether you flash in bootloader or DSUU mode correct?
what is your bootloader version?(if not original Atom Life?)
<-and have you tried the EBOOT SDCard (this may not work for Atom Life) method to restore bootloader if not as stated above?
homer285 said:
so you get the "CID error", whether you flash in bootloader or DSUU mode correct?
what is your bootloader version?(if not original Atom Life?)
<-and have you tried the EBOOT SDCard (this may not work for Atom Life) method to restore bootloader if not as stated above?
Click to expand...
Click to collapse
Hi bro,
My boot loader version is H3 - v0.79.
try both either to flash the official O2 rom from bootloader or window both are encountered 'Error - Customer or Model ID error'
Still have any solution?
Many thanks at all...
Cheers!
kenzojoey:: don't worry. its v simple. first connect USB, enter boot loade, RUN ur Upgrade, after finishing extrect, last STEP "NEXT" to strat up grade, after clicking NEXT immediately press u,r Keybord "DOWN ROW" it will work. good luck
Hi guys,
Hi,
I'm a hp rw6828 user and is very much enthusiast to try out those wm6 roms made by those experts. However, i did a mistake while trying to flash.
I tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode by pressing both "_" and soft reset. That didnt work. I tried another way by taking out the batt, leave it for a 10mins, press both "_" and soft reset, put in batt, release soft reset then "_" keys. That didn't work either.
But, just lately, i've tried taking out batt, holding the camera key and softreset, place back batt, release soft reset n camera button. This method works and i get what it seems to be an atom bootloader?
i get a black background with "MN1 Bootloader Mar 29 2006 13;52;14 copyright..... 1) debug module through UART 2) jump to DM Enter your selection.
I've searched the forums and found few ways to downgrade back to wm5 but those aren't the same conditions with what im facing. Can someone recommend how can i downgrade back to wm5 with the conditions that im facing? All you help is much appreciated. THank you.
You are lucky , at lease your device now become atom. My was totally cannot on power and just vibrate. Till I have to sent it back to HP SC and change the main board . Can you understand chinese , if yes than I have a solution you may try . Else you have to wait . I just download a program and doing some testing , the program is in chinese language .
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
elus said:
Thx for you reply. I guess u can say that. I'm from msia but cant read chinese.
Is it possible to solve the problem by sending back to hp using warranty claim? I think i still have warranty left but its ending very soon. One more week i think.
Click to expand...
Click to collapse
I don't think you still can claim under warranty unless you can make your phone total can't on and access to windows mobile. Last time I sent it back they charge me RM 385 to change the main board . I did talk to their technical personal , it seen like they don't know what is bootloader and flash it back to original rom . What they do was just change the main board with preloaded program .
Good luck
If you think that you can claim you warranty , than you just go a head . If not , may be you can access my thread "HP6828 WM6" , download any one of the rom that I post , follow the instruction accept downgrade bootloader . Enter your phone in bootloader mode . If you can start the process , than it will flash a new hp bootloader into your phone .
Against . Good luck
Cheers
I'm from malaysia also.
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
elus said:
Ok. I'll try your method to restore the bootloader. Thx for the fast reply. I'll keep u update with the progress. Thx again.
Click to expand...
Click to collapse
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
nhocbanme said:
You've flash ATOM Bootloader, there are many ways to restore to HP Bootloader ... don't worry !!!
Click to expand...
Click to collapse
Can share the information how to restore back the HP original bootloader ? And the procedure . Thanks
First you must have HP bootloader file (Eboot.nb0) 1.01 or 1.05 are OK.
- Use DRUU to restore Bootloader : replace ATOM bootloader file with HP bootloader file
- Use miniSD to restore Bootloader : copy Eboot.nb0 to miniSD card, go to bootloader ... wait 1' it will auto hard reset.
After flash successfull remmember remove Eboot.nb0 from miniSD.
- Reflashing Bootloader using JTAG. (Use only when can't use two above menthods)
HP Bootloader 1.01 : http://rapidshare.com/files/82853862/HP_BL1.0.1.rar
HP Bootloader 1.05 : http://rapidshare.com/files/82853924/HP_BL1.0.5.rar
nhocbanme could you please specify which specfic DRUU should be use for your method? Thank you.
You should use DRUU of Chartreux, replace Eboot.nb0 and choose OS and Eboot
Remember copy a HP68xx ROM (diskimage_Ver.nb0) to C:\Windows\Temp with DRUU of Chartreux then start...
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
elus said:
nhocbanme, you explanation seems vague to me. Probably cause im still new. Could you please give a clearer instructions? Thank you
Click to expand...
Click to collapse
-You must extract RUU in C:\Windows\Temp (no sub folder) then replace Eboot.nb0 with Hp bootloader 1.01/1.05
-Copy a diskimage_Ver.nb0 (any ROM WM6 for HP 68xx) to C:\Windows\Temp
-Run the DRUU program and choose OS and Eboot and start.
Goodluck !!!
It worked! Thx a lot nhocbanme and wantat. The methods restore the atom bootloader to hp bootloader. The DSUU by chartreux is a good tool.
Now, i would like to put this solution up into the wiki. How may i do so? Thank you.
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
williamSun said:
hi, im william from M'sia. i like to know how you recover your previous installed AtomROm back to WM5.
can u provide some step to step detail
if possible upload some files can let me flash from memory card in the bootloader screen
ur reply are highly appreciated
thx ~~
Click to expand...
Click to collapse
OK, please read my topic, I'll post a WM5 ROM flash via miniSD
help !!
im facing another problem again...
this time i changed the file extension EBOOT0502_MNT_01.01.03.nbf to EBOOT0502_MNT_01.01.03.nb0
(file from HP official WM5 SP34074, inside the installed folder )
and copy to memory card and put in 6828 then started to go bootloader screen
few minutes later my screen goes blank, and i tried with the revive methods
which is
-press the 2 softkey " - " and reset button
-put in the battery ,
-release reset, then release softkey
but didt work out!!!!no repsponse at all..tried many times..possible dead ad???
plz help me abit ..big troblem!
I dont think i can help u much here as im still new. From the looks of your problem, i guess u forgotten to cut the first 12bits (or something like that) of your bootloader when u use it to flash via mini sd. Maybe you can try the JTAG method mentioned in the atom wiki to restore your bootloader. Good luck.
Thanks guys!
The same exact thing happened to me yesterday..I was already about to sell my ipaq as a dead unit and i came upon this thread and after following the steps it did made ipaq alive again..
thank you very much guys,i hope you continue to help more people..
god bless and best of luck to you
more power xda-dev!
Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
One last thing - i tried to use the update tools again but it says there is no device connected so I did a hard reset and tried again but no go, after a hard reset i can flash the other roms though
cheers all
No Panic !!
andytof47;1862521 said:
Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
cheers all
Click to expand...
Click to collapse
No Panic~~~
Pls try to have a look to the link at my signature
( HardSPL easier)
please reply if ok!
I thought The sticky on top of the forum covered this
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
andytof47 said:
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
Click to expand...
Click to collapse
that is good and for experience users, mine is mostly for juniors. Please read and nothing bad.
The jumpspl... 100% work, and follow the steps, never fail.
Will your method work when not booting?
Just read your method and I hope to try it soon, but will your method work if it is not booting --- the method sounds like it needs the system to boot is this correct?
I hope it will work on this system while it is not booting...... I will let you know
OK I just read the whole post -------- The only file I can see is the jump spl.zip --
is that the hard spl or what?
dioxda2 I see how helpfull you are and thanks so far but how do I get the phone out of recovery mode or whatever mode that is??? what is the file I need??? please
thanks heaps
Can anyone please post a guide on how to flash Hard-SPL onto my HTC TYTN.
The guide for installing Hard-SPL onto the HERMES is not available anymore, and i am EXTREMELY confused about what im doing, and i am afraid i will brick my phone if i do something wrong.
Please please please help!
Read the sticky, first post on this page.
It really isn't hard to do. But be sure you know what you are doing btw. SO read the sticky!
Basically you just download the flavor of Hard SPL you want (I used 2.10 which I can recommend, very easy to downgrade to factory SPL again as I just learned!).
After download unzip the folder and run the RUUWrapper. Follow instructions exactly, do nout unplug your device etc. and it should work like a charm. It takes about 1 minute!
If you don't know what you are doing or you are still doubting, wait for Mr Vanx site to come online again or don't flash. There is always a risk you screw up and end with a $500 brick.
So use at your own risk!
Download hard spl v7 from
http://forum.xda-developers.com/showthread.php?t=296722
thanks guys i did it
hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca
puca said:
hi guys have tried to update mine today on a jasjam it connects sys it updating but starts at 0% then just jumps to 100% and says flash finished but when i restart the phone it still has the same loader what am i doing wrong i want to update it from windows 5 to windows 6 using crc-9 but don't want to update till i do the loader any help from you guys would be great
cheers puca
Click to expand...
Click to collapse
start the device in bootloader, what is displayed?
Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.
Rockford_622 said:
Mine is doing the exact same thing. Starts at 0% and jumps to 100% and says it is done, but it has done nothing.
Click to expand...
Click to collapse
the SPL flash is VERY quick.
I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.
hi mrvanx
thanks for your reply after checking the bootloader it has changed to 2.10 olie it did it so fast i thought it had failed will check properly next time and have successfully flashed it to crc 9 and it runs great thanks for all the help
mrvanx said:
the SPL flash is VERY quick.
I'll ask YOU this aswell, put your device into bootloader mode and tell us what it says.
Click to expand...
Click to collapse
I appreciate your reply Mr. Vanx. Same as with puca, I put my phone into the bootloader mode and it does indeed show the correct 2.10 Olipro version. This is the 3rd 8525 I have had and I could have SWORN it took much longer on the first 2. Even the update from WM5 to WM6 seemed to take much less time with this particular phone. Guess I shouldn't really complain
Downgrade Error 260
Hi Mr Vanx I have followed your guide to downgrade my current SSPL (2.10 Olipro) to SSPL (1.11). But I keep getting error 260. I have followed guide step by step.
I have even tried flashing from SD-Card (by renaming to HERMING.nbh). Process runs successfully, but nothing happens.
Its still showing SSPL-2.10 Olipro in bootloader. Am I missing anything?
Thanks
can some one point me to the guide. I am facing a NO GSM problem on vodafone VPA 1605 with following config:
ROM Version: 1.20.161.6
Radio: 1.03.06.00
CID: VODAP001
Bootloader: 1.04
I do not see the radio version or the IMEI. So I would like to do a HARDSPLv7 followed by Radio ROM update to 1.06.00.10. I hope this will work. Seniors may help with their sggestion.
Can someone help me with the guide to HARDSPL as I am doing it for the first time and the guides are not available at MR Vanx site nor can I locate the sticky?
regards,
H
have you read the first page?
cant uprade from spl 1.40 to 2.04
am using hermes 300 and i want to uprade from 1.40 t o 2.40 but i cant do it.i ve tried can anyone help
dania
How to hard reset without win
hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks
majida said:
hi
I have an I-mate 9502 but my problem is for pocket pc generaly.
I installed a program for sound, When I do a soft reset it hangs on Blue Imate page and didn't boot.
I tried to hard reset but it dosen't worked too(I know hard reset of it, is Green+FN+Power button) but it don't work, Also I tried to install a fresh Rom but it need to loud windows.
Please help how to hard reset it.
thanks
Click to expand...
Click to collapse
you should try the hard reset iMate 9502 posts by martin_yo in http://forum.xda-developers.com/showthread.php?t=407336&page=2
Code:
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...
but !!
With many thanks Hakim
But I know hard reset of my phone, I did it many time before, unfortunately it dosen't work this time. I tried all I knew about hard reset. but I couldn't do anything for my phone.
I tried (FN+Green+power like last time I did hard reset easy)(FN+Green+reset button)It don't sho any reaction.
Please help me.