Hi, I think wm6 or 6.1 roms have some common problems in all roms which can be discussed here.
I begin first :
I used to change rom by jumpspl and I didn't want hardspl ( i was spl 2.20)
but for the last cloudyfa rom i saw everywhere to use hardspl so i thought there will be problems if i don't do that
but after i hardspled my device to g3.4pda.... and used the new rom ,my device stays about 20 seconds on the spl showing page after each soft reset .
i remember this page went so quickly before that i couldn't read all of the numbers (ipl,spl,os,radio) in it
so the sof reset process takes a lot more time now.
i wanna ask if it is because of the new rom or the new cracked hardspl ?
and if it is the hardspl how can i change it back ?
To change back the HardSPL process, you will need to use an operator ROM such as the Orange WM5 ROM (it's available on the FTP, I'll find a link when I can).
You shouldn't need to HardSPL to flash a ROM, it is just more reliable that JumpSPL or SoftSPL in that once you've done it, it won't revert very easily.
oh my god . that's almost a bad news
i remember having a nvid rom which was used for the previous upgrade way.
i will use it when i wanna do my next rom upgrade.
so you think the spl is the reason for my 20s start up delay ?
by the way thank you as always for your kind answers.
i remember having a nvid rom which was used for the previous upgrade way.
Click to expand...
Click to collapse
I think the ROM can not be NVID as I don't think it'll reflash the SPL. I would recommend a vendor ROM as it will work (I have tried it).
so you think the spl is the reason for my 20s start up delay ?
Click to expand...
Click to collapse
I've only just noticed that delay, but probably something to do with the SPL.
ok so I will use one of the original jamin roms I have.
once again thanks and pardon me for another question :
since I am using roms above wm5 like 6 and 6.1 the batterystatus program wont do the cpuscaler thing which i used perfectly before.
I asked and tried a lot but could not get it to work. even tried to use XCPUScalar2007_v3-03 but it wanted a lot of testingand ...
I saw that you wrote @286 in signature , what do you use ?
if it's batterystatus can you give me your settings files
I was using Battery status (I use the 1.05 beta version, not sure if that helps) and it works flawlessly.
ok can you show me your setting for the two pages for overclocking or at least your xml setting file ?
another thing :
in the new cloudyfa rom the the bluetooth sound of the caller is much louder and i think that even the quality of the BT stereo music is higher,
but the volume of the caller sound from the device itself is significantly lower than before.
i remember that the previous builds had some tweak for the volume during the call, but in this one its not mentioned...
is this the reason ?
I've just flashed a ROM, so I will have to set up Battery status first and then I shall post screen shots.
I would suggest speaking to Cloudyfa, or putting a post in the ROM thread as it will probably get fixed faster.
useful info..
i'm really interested with the overclock..
i'll be watchin this thread..
Finally got around to it! Here are the screenshots. This is using BatteryStatus 1.05beta.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
great..
i'll try this soon i get back home
l3v5y said:
Finally got around to it! Here are the screenshots. This is using BatteryStatus 1.05beta.
Click to expand...
Click to collapse
thanks and I did all the settings on your pic.
but it stays like this:
i remember when it worked, there was another figure for cpu load near clock : 195/40
I think you need to enable the task manager feature, although I can look at that in more detail later...
Newbeeeeee Stuck with sound problem after upgrade
Hi,
I am newbee on this ROM upgrade issue. I tried to follow the upgrade guide as much as i could but after installing 3 or 4 WM6.1 ROM packages i fail to rectify one problem. That is the sound issue. Now even the midi tones set for the Ringing come with cutting. With increasing the volume it increases but this was not happening when i had the original WM5 installed. I fail to understand what step i am missing or there is some codec problem which i am failing to understand.
My steps are:-
(1) Hard SPL the device when connected with PC.
(2) Run the ROM_UpdateUtility_G4..... and wait
(3) Once the device shows 100% and PC gives success i remove the device its battery for 3sec and then softy reset it.
am i missing some important step
Sorry
Try this!
naumanx said:
Hi,
I am newbee on this ROM upgrade issue. I tried to follow the upgrade guide as much as i could but after installing 3 or 4 WM6.1 ROM packages i fail to rectify one problem. That is the sound issue. Now even the midi tones set for the Ringing come with cutting. With increasing the volume it increases but this was not happening when i had the original WM5 installed. I fail to understand what step i am missing or there is some codec problem which i am failing to understand.
My steps are:-
(1) Hard SPL the device when connected with PC.
(2) Run the ROM_UpdateUtility_G4..... and wait
(3) Once the device shows 100% and PC gives success i remove the device its battery for 3sec and then softy reset it.
am i missing some important step
Sorry
Click to expand...
Click to collapse
I think you should try to hard reset your device after flashing the ROM instead of just a soft reset.
Check out the WIKI page for prophet for how to hard reset your device!
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
Good luck!
// Ohamn
Related
Hi to all
Its possible extract a rom from a tytn and install this rom so other tytn???
or we must use the ship version???
if it is possible how can we extract a rom and how we can convert it to flashable rom???
Thx
Short answer: It is not possible yet, you must wait for a shipped version.
Long answer: A ROM consists of 7 parts:
1. Extended ROM
2. OS Image
3. IPL (part of bootloader)
4. SPL (part of bootloader)
5. Splash screen
6. HTC Logo (normally uses the same image as the splash screen)
7. GSM radio code
You can dump the original rom, but only the things contained in the FLASH will be dumped, this does not include the IPL, SPL, splash and radio parts, so its unuseful for flashing it back.
I've updated the wiki with this answer, see here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
Thx
For the Vv (very very) clear answer...
Please Help
Hey pof.
I was wondering if you could point me in the right direction with my problem.
I've tried to upgrade my HTC Tytn original ROM to JasJam ROM , right at the end (99%) the updating software stoped , gave me an error and restarted the computer. Now all i see on my tytn is dots with mixed colours all over the screen(not even a tri-color mode) it looks like a broken tv. Now i can't even sync it with my PC to install old ROM. Can't do anything with it now. the reason for this i guess is a ROM update that wasn't completed.
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Please help. Iam really desperate
slava888 said:
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Click to expand...
Click to collapse
Does it look like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) try SD card flashing:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
2) If it doesn't work, put the unit in bootloader mode, disable activesync usb on your computer (Connection settings -> disable USB connection) and try to flash a ROM using the usual method.
Other than this... I can only tell you trying to get a repair under warranty
Hey pof. Thanks for the quick reply.
That is exactly how it looks !
Listen, somehow i've managed to get in to bootloader.
It shows on top:
HERM200
IPL-1.01
HERM200
SPL-1.04
I've tried to do the SD Rom update but it doesn't work. Just shows me the same bootloader screen with those two messages(above). Pushing the powere button doesn't do anything
The bootloader update didn't work either. when i typed in "set 14 0" it said "Write Nand Success" but when i soft reseted it , it still gave me that screen.
Any ideas what i can do? other then send it for repairs.
Thanks again.
Hope to hear from u soon.................iam freaking out here
Just tried SDCardFlashing with different ROM files.
With the original ROM it does not do anything (stays in the bootloader screen)
With JasJam (that's the one i've tried to install) it show "checking..." message on screen , but does not do anthing.............been like that for 10 minutes.
Can't believe i've screwed up so bad
At least bootloader is still "intact", the right NBH file should be the one matching your CID, assuming that you have a TyTN it should be the TyTN 1.18 rom.
If you can go into bootloader and send commands using mtty check your CID with command "info 2".
Also try to do a rom upgrade using the usual proces while the unit is connected in bootloader mode and activesync usb disabled, click on RomUpgradeUt.exe, then Next ,next, next... if it fails tell me which error you get and where.
Hey Pof.
when i try "info 2" command , it just hangs without any output. and i can no longer type in commands.
I've tried to run RomUpgradeUt.exe
This produced ERROR[222]: DEVICE NOT RESPONDING. I get it at the end , after the updater asks me for final confirmation.
...............................
Read this thread, from post #11 until the end
http://forum.xda-developers.com/showthread.php?t=278025
Try to put USB monitor (instructions on post #11) and see if you get any output from the device... attach the USB capture here if you want, I can have a look at it.
Hey Pof.
Did everything like you said.
Here is the output.
P.S: didn't allow me to upload WinAce archived files so i upload the text file, its pretty small.
slava888 said:
Did everything like you said.
Here is the output.
Click to expand...
Click to collapse
The RUU sends "task 32 ; info 2 ; info 3" commands to bootloader, but you get no output from it, I think it's screwed because none of the three commands is answered by your device.
Normally, task 32 should return the seclevel, usually 0xFF ; info 2 should return the CID (in TyTN it is QTEK_001) and info 3 should return the block to calculate the dynamic password to be able to use wdatah command. Without wdatah you cannot flash
Do you have warranty on your device?
Yes its still under waranty , i purchased the device couple of weeks ago. Iam going to call them today.
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Just wanted to tell you that i really appreciate your effort. Thank you for everything.
slava888 said:
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Click to expand...
Click to collapse
HTC has not "officially" released any rom for the hermes yet, the tytn rom we have on the ftp is leaked from dangaard NL, so you cannot say you've been trying to upgrade the rom because they will tell you there are no rom upgrades available yet.
If you are not in a hurry to have your phone back you can wait until they release a ROM upgrade and then tell them the "truth"... but i don't know if they will be able to see that you flashed Imate ROM and not HTC ROM (and flashing another brand's rom voids your warranty). If they don't notice it, the repair should be under warranty and no charges for you.
If you are in hurry, just tell them you tried to flash the imate jasjam rom (downloaded from imate ftp) and phone screwed, they will charge you some money to repair / flash back the original htc rom on your device and return it to you, but you'll have to pay because this is not covered by the warranty.
I don't know how much will they charge you for this, but you can explain them by phone and ask...
Hi all
I was sick waiting for cid unlock for (t-mobile ameo – dutch),
So I used modified tools from http://forum.xda-developers.com/showthread.php?t=299154
to force writing Windows.nb ,just changed the bat file to write the new OS and it worked, my Athena now has English OS from RUU_Athena_HTC_WWE_1.25.405.2_1.38.00
the modified tool is here
http://www.aczua.com/Athena_upgrade.rar
(use @ your own risk)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
sorry not yet, needs the wm6 XIP but wm5 cooking can happen
can this remove the sim/network lock as well?
So then the question is: What is the best ROM out there... the AMEO, Dopod or HTC?
lawbet7eb, can i first thank you for the doing this for the ameo/dopod/advantage communities. Could you please inform me or point me to the correct link which will show me how to use this tool, thank-you.
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
Thanks for the link fallenczar. This is great news indeed. Is this now officially CID unlocked? Or just a way of forcing a flashing of another ROM?
CAN U please provide with more deatils of how did u do it !!! we all appretiate it hoop that u can say how to upgrade to english waited something like this for a long time THANKS ALOT !!!
Its NOT Cid unlocked, it uses some utilities by itsme to write directly to the NAND flash that the OS is stored in
Is it possible flashing the device fromout the bootloader screen? Or must the device be connected en synched using activesync?
Regards
Vince
Can anyone modify the files to flash radio..I know that if we flash POF's 1.16 Radio of Hermes, it makes the device Super CID..
Tried, but doesn't work...pls others post the results
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
hdubli said:
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
Click to expand...
Click to collapse
what do you mean by great discovery?..do you manage to flash the radio?
you cant flash radio like this.
Can someone add the procedure to the wiki and does it mean that now i can flash my english ameo with a unbranded htc athena rom ?
Take it easy friends...it needs to be safe for all to use..
Guys I'm all for progress and this going in the right direction, but it is NOT properly CID unlocked. Be very careful peeps before someone bricks their device!
This is why we have set up the Athena project, to avoid this and get some pro's to help us.
I hope everyone agrees that Midget_1990 should be on board as he is experienced with ROM cooking and the likes for the VGA 3G Universal and is the only xda developer who has showed an active interest in our forum.
if you read the link from arti upgrade you will get the picture,
it could be risky to force OS with this procedure as we all know that there is a problem with athena cutting connection, read this:-
http://forum.xda-developers.com/showthread.php?t=298259
if athena cuts and upgrade was not complete, u can reflash with original rom.
another thing, this upgrades only the OS, not radio, ipl spl...etc, AND IT WILL NOT MAKE ATHENA CID-UNLOCKED
i believe we all should join The Athena Project @ http://forum.xda-developers.com/showthread.php?t=311651
there is nothing like SuperCID Athena
I heard from somebody that there was a way to CID unlock an Ameo with the old original radio ROM from T-Mobile. You had to flash back to an early Radio, then you could remove CID lock (or the early radio didnt have a CID lock in it). Then you could flash a normal Athena Radio back into it. He was vague about it but promised to email me the full procedure. He never did.
Is this worth looking into?
thanks to lawbet..now i have a full english version rom...
i first attempt was stucked..but then tried again using hdubli instruction...i`m happy right now untill we get cid unlock...
cheers..
After using Rom WM6.1 of Cloudyfa for 2 or 3 days I found a problem with the switch off function. Everytime I switch the phone on, it switches off again automatically. Then i must press the power button one more time and it's ok for the 2nd time.
Thought it was somes error during the uprom process, I tried to uprom one more time and hard reset many times but still failed.
Just tried the Rom of varanusvincent (Vista is beatiful and the speed is good, but the battery lost so fast) , and also get the same problem. Anyone can help?
vosathanh said:
After using Rom WM6.1 of Cloudyfa for 2 or 3 days I found a problem with the switch off function. Everytime I switch the phone on, it switches off again automatically. Then i must press the power button one more time and it's ok for the 2nd time.
Click to expand...
Click to collapse
SAME PROBLEM
HELP US CLO........FA
PLZ'
THANKS
Same problem!
yes yes
me too
but not always, about 80% of all times this happens
i think its an incompatibility with one of the programs we install
but i dont know which one.....
ahwaztaxi said:
yes yes
me too
but not always, about 80% of all times this happens
i think its an incompatibility with one of the programs we install
but i dont know which one.....
Click to expand...
Click to collapse
Well, I don't have that issue, I think...
ahwaztaxi said:
yes yes
me too
but not always, about 80% of all times this happens
i think its an incompatibility with one of the programs we install
but i dont know which one.....
Click to expand...
Click to collapse
U're right. Abt 80% of all times this happens, but I don't think it was an incompatibility with one of the programs we installed cause' after making the hard reset I didn't install anything and the problem still occurs.
I'm now using Rom of Korand for more stable though i still love Rom of cloudyfa. :
I think, this problem because of animated screen..
Even me too facing the same problem with Clean Edition, the problem is it doesn't gets switch off in first attempt, instead the device gets restart and the next time when I hold the power key it switches off properly.
I don't think it is because of Animated Startup, because I already disabled it. May be a compatibility issue.
Thanks
Aju
ajubaba said:
Even me too facing the same problem with Clean Edition, the problem is it doesn't gets switch off in first attempt, instead the device gets restart and the next time when I hold the power key it switches off properly.
I don't think it is because of Animated Startup, because I already disabled it. May be a compatibility issue.
Thanks
Aju
Click to expand...
Click to collapse
1. Try Use KaiserTweak .. it helps me from long time power on delay~~ ^_^
Hope it helps to you too. give it a try, nothing to lose..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use this for configuration.. Best config tool now..
Cloudyfa add it on his new version..
mine too
and how i do it with advance config or registry editor ????
vasvas said:
and how i do it with advance config or registry editor ????
Click to expand...
Click to collapse
advance config CANT HELP.
dioxda2 said:
1. Try Use KaiserTweak .. it helps me from long time power on delay~~ ^_^
Hope it helps to you too. give it a try, nothing to lose..
Click to expand...
Click to collapse
Sorry I didn't understood what you want to say. You to mean to try out registry tweak or something??
kaiser tweak
can someone upload kaiser tweak and also wifi on version 6.1 does not
works is there a way to fix it ????
wifi work in my device.
use 6.1 too
ajubaba said:
Sorry I didn't understood what you want to say. You to mean to try out registry tweak or something??
Click to expand...
Click to collapse
I mean to execute Kaiser tweak software.. and the capture in the actual software looks~~~
here you go ~~
KaiserTweak
vasvas said:
can someone upload kaiser tweak and also wifi on version 6.1 does not
works is there a way to fix it ????
Click to expand...
Click to collapse
It works straight out of the box! If you are sure your settings are right, Hard Reset or reflash.
solve turnoff after disable animation.
varanusvincent said:
I think, this problem because of animated screen..
Click to expand...
Click to collapse
thanks varanusvincent its work for me.
power off problem is gone.
thanks again.
I did that too.. and problem gonel.. But for some people, said that problem is still exist..
BUt I dont have that Problem anymore after disabling animated function.
perhaps i've got another solution here: as i wrote a time ago on another thread, i have NOW none of the known issues on my wm 6.1 prophet. but i had realized each single one of them for about half an hour directly after flashing
so what's happend? : first i flashed rom. then i do (like strictly advised ) a hard reset manually (after the one the device makes automatically after flashing).
so far so good... then i started in makeing my settings, installing apps, trying around and so on. and in this time, i had flashing today screen on power on, sms cannot be sent message after three or four sms until soft reset, much battery drain and so on.
well, then i made a big mistake, set my favorite sip as default in sip-hide tool (it should be set not there but with another tool i forgot to install...) , and after a soft-reset the device stuck at the htc-splashscreen
so i had to do a second hard reset and since i did it all works properly like it should!
maybe this could be a solution for all of you, too.. try it out (a second hard reset!), what do you have to loose now..
I just bought a USED TYTN Pro. The person i bought it from put his own rom on there. What I would like to know, is if I decide to change to a different COOKED rom, do I have to follow all steps in the newbie guide? Or can I skip ahead because he already has a cooked rom in there and may have already done some steps.
I tried to do the reset and i dont get a tricolor screen, i just get
R- 1.14.01.010
G- 32.50.7018.00h
B -3.62
VarioIII said:
I just bought a USED TYTN Pro. The person i bought it from put his own rom on there. What I would like to know, is if I decide to change to a different COOKED rom, do I have to follow all steps in the newbie guide? Or can I skip ahead because he already has a cooked rom in there and may have already done some steps.
I tried to do the reset and i dont get a tricolor screen, i just get
R- 1.14.01.010
G- 32.50.7018.00h
B -3.62
Click to expand...
Click to collapse
look at the stickies, the 4th one, (hard spl), look at the FAQ to enter bootloader
Get into your Bootloader (hold down camera+power buttons while inserting stylus for approximately 3-5 seconds). It should show SPL-3.28.Hard or SPL-3.29.Hard on the second line of text on your screen. If not then you didn't flash the new HardSPL, try again.
then go back and read some more
lupe
actually got to the screen and i see
Herm200 IPL-1.04
Herm200 SPL-1.40.Olipro
You should be able to get to the Tri-Color screen. What are you doing to get to the screen? Try holding the Power & Camera buttons and press reset. Keep holding the Power/Camera buttons until you get to the bootloader (tri-color) screen.
All you need to do is make sure the device is HardSPL. If it is, then you can flash other ROMs.
Looks like you've flashed Hard SPL once. If yes, from now on, you can directly proceed with the flashing of new ROMs right after download.
Regards,
Carty..
VarioIII said:
actually got to the screen and i see
Herm200 IPL-1.04
Herm200 SPL-1.40.Olipro
Click to expand...
Click to collapse
So its Hermes, not Kaiser
VarioIII said:
actually got to the screen and i see
Herm200 IPL-1.04
Herm200 SPL-1.40.Olipro
Click to expand...
Click to collapse
Your device as Hermes(TyTN),this topic reserved for Kaiser(TyTN_II,AT&T...)
is hermes as good as kaiser, should i find myself a kaiser?
VarioIII said:
is hermes as good as kaiser, should i find myself a kaiser?
Click to expand...
Click to collapse
Let me ask you. You don't know what you have bought?
Anyway this thread should me moved....
1. Go to the Hermes section
2. Search
Not as good by far
kristoff_sz said:
Let me ask you. You don't know what you have bought?
Anyway this thread should me moved....
Click to expand...
Click to collapse
VarioIII said:
is hermes as good as kaiser, should i find myself a kaiser?
Click to expand...
Click to collapse
VarioIII,
The Kaiser is much better in form and function. You should always know what you're getting yourself into PRIOR to purchase (A newb mistake). I'm sure Mods will move this... somewhere
Monderator intervention....
First, Moved this thread to the proper Forum.
Second, the questions you ask are subjective.
Yes, the Kaiser is a newer model and has additonal features but there are users who swear by the older models. In fact there are apps the work better on the Hermes and even the Wizard than the Kaiser (gotta love video driver issues!).
I would suggest you do some research, this forum is a great place to start. You've got a lot of reading to do, don't expect to be spoon-fed here check the links in my signature so keep your self out of trouble (especially the What is XDA-Devs).
Hahaha
This is an amazing thread...
I dont know the IPL and SPL that kaiser gots!
but SPL 1.40.Olipro and
IPL 1.04
Sound s to me like a Hermes....
But tell us...
Is this your machine?
1.-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
or this
2.-
So... #1 or #2
i got the hermes 200, just flashed with some manilla rom, works great. just 5 questions i couldnt find answers to;
1)Had a nokia n95, exported phonebook to .CSV and .TXT, how do i get that into this phone?
2)I was shown the gps receiver working, but since i flashed dont know how to get satellite aquisition
3) Anyway i can use mp3 for Text alert and Alarm?
4)(Manila2D) V.20 Build 20921 by PhamQuang is what im using, is it the best for manilla 2d?
5) Where can i get voip sw to work with the above rom
THANKS in ADVANCE
1st, you need Hard SPL V7 on your Hermes to be safest when flashing new roms...
1. Manually enter. You could also bluetooth across if the contacts are still in the n95.
2. Pair the receiver. then go to advanced. assign a serial port ( I use 4). Next, at the bottom of the screen, pick com ports. Pick set new then highlight the GPS receiver. Assign port number you want (some ports aren't available as the Hermes uses these.). Open the GPS software you use (I use Tomtom) and select the port you are using. Violla. Good to go.
3. There are some apps available but I can't remember what they're called, do a search.
4. Don't use Manilla.
5. Don't use voip.
You need to search as these things have been answered. try a combination of keywords if you don't get a hit straight away.
Cheers...
Anyone, any ideas?
Quite some time ago, when HD2 was brand new, there were some people around with unofficial beta-ROMs on their devices. Don´t exactly know what was going on, but I am quite sure the search function will bring this or that into light for you.
Maybe flashing with a Goldcard might help, not sure. But apparently, your SPL seems to face troubles, no wonder you´ve got freezes etc.
Did you try to flash something older than the 3.14 stock ROM? A lot of users are not happy with this anyway...
Also, older SIM cards or some SD cards can cause issues, did you try to flash without those in the device?
I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.
Bruno Kreisky said:
I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.
Here is the picture from working HD2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here is picture from non-working HD2
As you can see, the difference is in first line "PB 81100" and "PB 81***" I think I have to improve here but not glue how to???
Update:
And now it becomes really strange. I already flashed the strange phone with Stock ROM from SD-Card so you can see above. After that I did a flash with latest ARTEMIS ROM and SSPL_RUU and the following Boot Screen appears
So before flashing there was SPL 3 on phone, while flashing there was SPL1.42.6666 on phone and after flashing there is SPL 3 again on phone???
Click to expand...
Click to collapse
Sir, SSPL works only for 1 (one) cycle. After you reboot the phone, your SPL will return to the original one (the one before SSPL).
SPL 1.42.6666 is only a temporary SPL modifying your actual/original SPL.
Cheers
Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?
Bruno Kreisky said:
Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?
Click to expand...
Click to collapse
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers
silverwind said:
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers
Click to expand...
Click to collapse
As I wrote above (maybe bad english), I flashed both mobiles with latest Stock-Rom (downloaded from htc.com/de) via, SD-card. Both mobiles were sold from same Mobile provider in austria with same SIM-lock. But, they were un-SIM-locked differently. Now, one is working smoothly (the one with PB81100) and one freezes almost (the one with PB81***) and GPS is working really, really badly in comparison to the other one.
EDIT: GPS is completly NOT working on device with PB81*** on Boot-Screen :-(
Push this thread!
hi,
i have also an htc hd2 from "3" in austria.
i flasht it to hspl 2.08 without any problems.
but! since i let it unlock it in a mobile-store here in vienna.
the model ID- is now "PB81xxxx".
and now: it is not possible to flash it back.
here are the pics:
pocketpc.ch/htc-hd2-rom-upgrade/126754-sim-sntsperren-kein-flashen-mehr-moeglich.html#post990530
it seams the cnaged the model _ID during unlocking.