[Q] PB81 - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Anyone, any ideas?

Quite some time ago, when HD2 was brand new, there were some people around with unofficial beta-ROMs on their devices. Don´t exactly know what was going on, but I am quite sure the search function will bring this or that into light for you.
Maybe flashing with a Goldcard might help, not sure. But apparently, your SPL seems to face troubles, no wonder you´ve got freezes etc.
Did you try to flash something older than the 3.14 stock ROM? A lot of users are not happy with this anyway...
Also, older SIM cards or some SD cards can cause issues, did you try to flash without those in the device?

I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.

Bruno Kreisky said:
I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.
Here is the picture from working HD2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here is picture from non-working HD2
As you can see, the difference is in first line "PB 81100" and "PB 81***" I think I have to improve here but not glue how to???
Update:
And now it becomes really strange. I already flashed the strange phone with Stock ROM from SD-Card so you can see above. After that I did a flash with latest ARTEMIS ROM and SSPL_RUU and the following Boot Screen appears
So before flashing there was SPL 3 on phone, while flashing there was SPL1.42.6666 on phone and after flashing there is SPL 3 again on phone???
Click to expand...
Click to collapse
Sir, SSPL works only for 1 (one) cycle. After you reboot the phone, your SPL will return to the original one (the one before SSPL).
SPL 1.42.6666 is only a temporary SPL modifying your actual/original SPL.
Cheers

Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?

Bruno Kreisky said:
Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?
Click to expand...
Click to collapse
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers

silverwind said:
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers
Click to expand...
Click to collapse
As I wrote above (maybe bad english), I flashed both mobiles with latest Stock-Rom (downloaded from htc.com/de) via, SD-card. Both mobiles were sold from same Mobile provider in austria with same SIM-lock. But, they were un-SIM-locked differently. Now, one is working smoothly (the one with PB81100) and one freezes almost (the one with PB81***) and GPS is working really, really badly in comparison to the other one.
EDIT: GPS is completly NOT working on device with PB81*** on Boot-Screen :-(

Push this thread!

hi,
i have also an htc hd2 from "3" in austria.
i flasht it to hspl 2.08 without any problems.
but! since i let it unlock it in a mobile-store here in vienna.
the model ID- is now "PB81xxxx".
and now: it is not possible to flash it back.
here are the pics:
pocketpc.ch/htc-hd2-rom-upgrade/126754-sim-sntsperren-kein-flashen-mehr-moeglich.html#post990530
it seams the cnaged the model _ID during unlocking.

Related

how to flash any ROM to CID locked

Hi all
I was sick waiting for cid unlock for (t-mobile ameo – dutch),
So I used modified tools from http://forum.xda-developers.com/showthread.php?t=299154
to force writing Windows.nb ,just changed the bat file to write the new OS and it worked, my Athena now has English OS from RUU_Athena_HTC_WWE_1.25.405.2_1.38.00
the modified tool is here
http://www.aczua.com/Athena_upgrade.rar
(use @ your own risk)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
sorry not yet, needs the wm6 XIP but wm5 cooking can happen
can this remove the sim/network lock as well?
So then the question is: What is the best ROM out there... the AMEO, Dopod or HTC?
lawbet7eb, can i first thank you for the doing this for the ameo/dopod/advantage communities. Could you please inform me or point me to the correct link which will show me how to use this tool, thank-you.
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
Thanks for the link fallenczar. This is great news indeed. Is this now officially CID unlocked? Or just a way of forcing a flashing of another ROM?
CAN U please provide with more deatils of how did u do it !!! we all appretiate it hoop that u can say how to upgrade to english waited something like this for a long time THANKS ALOT !!!
Its NOT Cid unlocked, it uses some utilities by itsme to write directly to the NAND flash that the OS is stored in
Is it possible flashing the device fromout the bootloader screen? Or must the device be connected en synched using activesync?
Regards
Vince
Can anyone modify the files to flash radio..I know that if we flash POF's 1.16 Radio of Hermes, it makes the device Super CID..
Tried, but doesn't work...pls others post the results
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
hdubli said:
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
Click to expand...
Click to collapse
what do you mean by great discovery?..do you manage to flash the radio?
you cant flash radio like this.
Can someone add the procedure to the wiki and does it mean that now i can flash my english ameo with a unbranded htc athena rom ?
Take it easy friends...it needs to be safe for all to use..
Guys I'm all for progress and this going in the right direction, but it is NOT properly CID unlocked. Be very careful peeps before someone bricks their device!
This is why we have set up the Athena project, to avoid this and get some pro's to help us.
I hope everyone agrees that Midget_1990 should be on board as he is experienced with ROM cooking and the likes for the VGA 3G Universal and is the only xda developer who has showed an active interest in our forum.
if you read the link from arti upgrade you will get the picture,
it could be risky to force OS with this procedure as we all know that there is a problem with athena cutting connection, read this:-
http://forum.xda-developers.com/showthread.php?t=298259
if athena cuts and upgrade was not complete, u can reflash with original rom.
another thing, this upgrades only the OS, not radio, ipl spl...etc, AND IT WILL NOT MAKE ATHENA CID-UNLOCKED
i believe we all should join The Athena Project @ http://forum.xda-developers.com/showthread.php?t=311651
there is nothing like SuperCID Athena
I heard from somebody that there was a way to CID unlock an Ameo with the old original radio ROM from T-Mobile. You had to flash back to an early Radio, then you could remove CID lock (or the early radio didnt have a CID lock in it). Then you could flash a normal Athena Radio back into it. He was vague about it but promised to email me the full procedure. He never did.
Is this worth looking into?
thanks to lawbet..now i have a full english version rom...
i first attempt was stucked..but then tried again using hdubli instruction...i`m happy right now untill we get cid unlock...
cheers..

Can you go back to a retail 8525 AT&T ROM after...

Is it possible to go back to an AT&T Rom without problems after (what I think) having SSPL installed? What happened was that I had a retail WM5 on it, then went to VP6's Rom, then found the AT&T official Rom and installed that. If the final comes, and I run it, will I have issues??
Thank you
MakaveliReturns said:
Is it possible to go back to an AT&T Rom without problems after (what I think) having SSPL installed? What happened was that I had a retail WM5 on it, then went to VP6's Rom, then found the AT&T official Rom and installed that. If the final comes, and I run it, will I have issues??
Thank you
Click to expand...
Click to collapse
Yes, you can (See mrvanx.org and look for downgrade guides)
No, you won't have issues.
todd_jg said:
Yes, you can (See mrvanx.org and look for downgrade guides)
No, you won't have issues.
Click to expand...
Click to collapse
Other than the issues that the bloatware official will give you!!
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Theres a direct link.. I just got thru doing this with no problems. I would flash the radio/original rom first before downgrading the spl.
Thanks guys.
One more question, if I have WM6 (ATT "official" release from this site) can the user later upgrade to an official WM6 ROM from the htc site? I am asking this because I will be selling my 8525....
MakaveliReturns said:
Thanks guys.
One more question, if I have WM6 (ATT "official" release from this site) can the user later upgrade to an official WM6 ROM from the htc site? I am asking this because I will be selling my 8525....
Click to expand...
Click to collapse
Sure. You will need to unpack the official HTC rom and put the nbh file in a folder with the custom_ruu. It won't flash using the ruu shipped from HTC, but it is a piece of cake.
You just unrar the exe file and pull the nbh out, drop it in a folder with custom_ruu and you're off.
Thank you
By the way, if I downgrade to a retail SPL, will I lose the subsidy unlock? I unlocked my phone via a code from AT&T.
Thanks again!
MakaveliReturns said:
By the way, if I downgrade to a retail SPL, will I lose the subsidy unlock? I unlocked my phone via a code from AT&T.
Thanks again!
Click to expand...
Click to collapse
Well, I have never unlocked my Hermes using the code from AT&T. I have always done it via pof's unlocker. Reflashing has never relocked my device or any other that I have seen. So, I think that you are safe.
Also, I believe that the unlock code is calculated using an algorithm based on the IMEI number. So, even if it did relock, the code SHOULD unlock it again.
If all that fails, just use the unlocker that pof made!
Thanks to everyone for their time.
I currently downgraded to SPL-1.06
When I run the retail ROM that is:
RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship
I get a crash that says this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just want to have the ability to update to retail ROM's whenever I can without extracting the exe files and running them manually.
To tell you the truth, I am selling this to a buddy and he's not really computer literate, so I don't want to help him out every second. He needs to upgrade to the retail AT&T ROM for the 8525 once it's out in a month or two. Right now I am giving him the AT&T (beta) rom that I found on this site.
Any help would be appreciate it.
MakaveliReturns said:
Thanks to everyone for their time.
I currently downgraded to SPL-1.06
When I run the retail ROM that is:
RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship
I get a crash that says this:
I just want to have the ability to update to retail ROM's whenever I can without extracting the exe files and running them manually.
To tell you the truth, I am selling this to a buddy and he's not really computer literate, so I don't want to help him out every second. He needs to upgrade to the retail AT&T ROM for the 8525 once it's out in a month or two. Right now I am giving him the AT&T (beta) rom that I found on this site.
Any help would be appreciate it.
Click to expand...
Click to collapse
Looks like Vista. Have you checked out MrVanx guide for Vista flashing?
Yes, Vista is working fine for flashing and I've followed that guide and it all works. I've flashed this phone without problems through Vista and ActiveSync for Vista.

Yes, I'm a huge n00b.

Hi there!
Well, despite the huge warnings in red colors, I installed the official RUU 2.1 update. My HTC Hero is now with 2.1 and works fine, but I would like to install a Spanish language pack (MoreLocale doesn't works). Yes, I know I could wait to the WWE version but... The mistake is done. So, my questions are:
1.- Could I rollback my firmware or try to install a custom rom? How? (I tried Goldcard + Previous version without success)
2.- Could I install a spanish locale?
Thanks in advance and congratulations for the great job you're doing today. How many roms in less than 24h!
This is a so-called 'WE TOLD YOU SO' situation..
But, have you tried an old RUU package?
Yes, and I can't install the previous one. I also noticed that my bootloader version is newer (000004 before, 000007 now).
It's suposed to be possible? (install the prev. Version, I mean)
Maybe with the goldcard method, but not guaranteed it will work.
Ok, I'll try later again, but I'm not sure if this is gonna work, because I tried it twice a while ago.
Thanks!
Good luck
Tried twice with the GoldCard method (I did it well, because it worked when I updated) and I get this error:
Checking Main Version
Update fail!
And in the RUU installer:
Error [140] Error bootloader version (or something like that)
Suggestions?
Wait for someone who is able to root the new rom...sorry...
Uniyah said:
Tried twice with the GoldCard method (I did it well, because it worked when I updated) and I get this error:
Checking Main Version
Update fail!
And in the RUU installer:
Error [140] Error bootloader version (or something like that)
Suggestions?
Click to expand...
Click to collapse
hi, i'm just a noob like you, i had to do the goldcard method, it didn't work the first time, but to make sure i was following the tutorial, i had to print it, and follow again, and then it worked, make sure you pick up the right one for your phone. and start from the beginning again , i'm sure you'll get it to work at the end, don't give up. just go through what you doing step by step, you'll find what was wrong.
Ok, I'm trying right now. Will post results.
Thanks!
hi, i've loaded my first custom rom,the new villainRom 10, wow the phone is very quick, plus pinching the main screen the new feature, great.
first i didn't know which rom to use, had to go with what btdag got. all the credit goes to him on a great tutorial plus villainRom great rom.
downloaded the new radio, haven't installed it yet. got to do more reading first before i do, to be on the safe side. goodluck uniyah hope you got it sorted.
cheers to all the devs and tutors
Well, I tried the GoldCard method for 15 times. It just doesn't works. I think it checks the version and give me this error.
One question: Is possible to install the Spanish locale?
For now it's just impossible to root the new 2.1 because nobody has done it yet so for now you will have to wait... However, the Sprint Hero had been rooted a few days ago so I think that it won't take ages to root our Hero...
Try MoreLocal in the market for installing Spanish...
MoreLocale doesn't works.
So, there is nothing I can do for downgrade? Any other Goldcard methods or something like that?
I don't think so... In my opinion some guy will find a way to root the new rom but you will have to wait...
As you have seen Gold card doesn't work...So the protection against root has changed...
New HBOOT probably denies installation of lower version than it already is on the phone, thats why you can't run any of the previous RUUs. Tough luck
Rooted 2.1 official rom's are out now try vilain 10 but be careful when flashing the radio because i just bricked mine flshing it :'(
Brrr, and I can't get into recovery mode. I get this when I try to put the phone in recovery mode (Power + Home button)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And, of course, I'm unable to load anything using fastboot or hboot. The version that shows me the bootloader is HBOOT-1.76.0007 (HERO10000)
What happens when you press home, or back?
ddotpatel said:
What happens when you press home, or back?
Click to expand...
Click to collapse
I tried twice and nothing happens :S

Bootloader blocked

Hello and sorry for my english.
I have a Mozart phone but the phone is blocked on bootloader with only one line that say "PD67100 SS-BC (4k)"
no "serial" or "usb" write...
No hard resert possible.
How to resolve this problem ?
Thank
WAIT ....
same problem .. but no solution for now ... we have to wait
boot loader blocked
same here no usb no serial
That is interesting to see...What countries, networks, branded or otherwise did you get the phone with?
My phone is on Orange France.
I just look at mine - it is the same loader,
From my experience the Boot loader screen should always display Serial, even when not connected to a computer. In my 7 years of supporting HTCs - I have never seen the issue you describe.
I've got the same problem.
If anyone will find solution of that problem please write it here.
Same prob here on HTC unbranded version. Hard Reset and Checksum possible, but no usb-connection in bootloader.
I am also having the same problem. = / No connects bootloader mode.
same problem:
just without vender id. instead pd67100 there are differend characters.
I think this happens coz of RSPL/HSPL hack
I don't really like flashing these roms as they may result in destroying your phone.
I just like ROMs coming from ansar.
I hope you all find a solution.
As long as your are careful and follow the guides and read everything then there should be no issues with flashing ROMS to devices "ansar" ones or otherwise.
Hi all ,i have the same problem ,on my screen i read only
PD67100 SS-BC (4K) ,nobodys know a solution at this problem?
"PD67100 SS-BC (4K)"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
means your device now in half brick condition, and not yet solution till now (but it with jtag it may possible i think)
for this question or similar with that, please refer to this thread and make sure you read carefully missing step or instruction can make our mozart going brick or maybe half brick
Cotulla said:
Issues with MANGO RUU ROMS.
List of such ROMs:
It's not full list. Maybe some other ROMs affected by this too.
Thread about this ROMs.
RUU_Gold_S_HTC_Europe_3.02.401.01_Radio_5.69.09.29 a_22.50.50.21_Signed_GOLD_RELEASE.exe
RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe
RUU_Mozart_S_HTC_RUS_4.06.411.00_5.69.09_RELEASE.e xe
RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.0 9.29a_22.50.50.21_Signed_SCHUBERT_RELEASE.exe
RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE .exe
About issue:
After running RSPL on MANGO OSPL, you can't flash device via SPL.
Windows Phone 7 OS is still booting and working.
Instead of full SPL screen you will see only one the first line:
You device will be "HALF BRICKED", because you can use OS, but can't flash anything else.
At the current moment it's IMPOSSIBLE to recover such devices. And I am not sure it will be ever possible.
What you must NOT do:
Before running RSPL wizard check your SPL screen.
There current SPL version at top: "X.Y.Z 2250 "
When wizard asks you to choose your current SPL version, be sure it's present inside versions list.
If your current SPL version doesn't present in the list, you can choose nearest version, BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
Generally it means that you must NOT run RSPL wizard after MANGO RUU ROM installation. You must flash older version (with 7004 or NoDo) and then run RSPL.
Installed OS version doesn't important. Only SPL version important.
Click to expand...
Click to collapse
Does anyone know if this problem can be solved using the GoldCard?
Hello ,any news about this problem?
Nicolas Alves said:
Does anyone know if this problem can be solved using the GoldCard?
Click to expand...
Click to collapse
I've been told that Goldcard will not help to replace the SPL with an older version so won't get you out of the situation that stops you flashing ROMs of your choice. However, I would expect it to still be possible to use Goldcard to change a ROM.
f
The only way to unlock the boot via jtag repair. Tested and works on Mozart,
Fixed!!
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version
thecraziest77 said:
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version
Click to expand...
Click to collapse
Nothing like that here - just says up-to-date. Which ROM did you use before?

[TOOL] Titan Advanced RUU

1. Possibility to choose one from several NBH files. Files should be placed in one folder with utility.
2. Possibility to choose the way (option) of flashing
3. Possibility to get NBH file info (Modification date, Model ID, CID, Version, Lang, Chunk size)
Regular RUU (Task 28)
Hard Reset is performed straight after flashing automatically (good for NBH containing OS section)
Custom RUU (Task 00)
to install only radio roms without performing hard-reset.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Custom ROMs can be flashed if HSPL is installed to device (no idea when it will be ready or published)
Utility was tested with official Titan roms - thanks to AndrewSh and Feropont
ATTENTION! Unskilled interference to your phone's OS can totally crash your device.
If you understand what are you going to do - go ahead.
No warranty.... use on your own risk.
thanks alot barin.
Thank you buddy, good job
Excellent and very convenient tool - thank you very much my friend.
For those who will use it with official nbh - remember that process is "freezing" at 5% - re-flashing spl - so don't worry - just wait with patience. It will continue faster after spl update.
Also remind - how to get to bootloader mode - switch the device off, press and hold Volume Up and Down simultaneously and turn the device on. Then connect USB cable.
Titan Advanced RUU and nbh file should be placed in one folder on your PC.
Thank you, good job
Thank you , good job
Thank you so much!!!!
hi, sorry for the question but with this tool, does it mean that i can flash a taiwan ROM on my european htc titan ? or is it still restricted to the only ROMs from europe ?
xtrememanix, this tool is just Update utility - flasher. You should wait for HSPL to flash another region to your device.
Man... seem that HSPL for HTC Gen2 is coming!!!! LOL.
nhathoa said:
Man... seem that HSPL for HTC Gen2 is coming!!!! LOL.
Click to expand...
Click to collapse
No info, dude, if it's coming or not.
Actually Titan Advanced RUU has no connection to HSPL discussions ans speculations. It's the same situation as with OsBuilder - current public version supports WMSTORE (second gen devices rom structure) but there's no way to flash custom second gen roms.
nice tool..thx4that....yeah thats right..building a rom is not the problem...the bootloader is it..hmm...someone here can contact cotulla or other people from the dft team 4 some news?..
Sent from my OMNIA7 using Board Express
So with task28, when it finish flashing ROM to my Titan, and just wait to config into WP7? Don't need hard reset anytime by myself?
Little confusing
My ways of flashing ROM:
Using RUU to flash
After finish. Turn off device and Hard reset it.
With Task28 i dont have to Hardreset anymore, right?
-=Barin=- said:
Regular RUU (Task 28)
Hard Reset is performed straight after flashing automatically
Click to expand...
Click to collapse
GinCifer, if you have a desperate wish to perform one more hard reset manually - go ahead. But it's not necessary.
AndrewSh said:
GinCifer, if you have a desperate wish to perform one more hard reset manually - go ahead. But it's not necessary.
Click to expand...
Click to collapse
Thanks for confirming me
I'm kind of confusing with task29 in WinMo device a little
any chance for a version of this for the HTC Radar?
sh4d0w86, I will point Barin on your request today....
AndrewSh said:
sh4d0w86, I will point Barin on your request today....
Click to expand...
Click to collapse
thanks, AndrewSh. I am willing to test with my HTC Radar.
sh4d0w86 said:
thanks, AndrewSh. I am willing to test with my HTC Radar.
Click to expand...
Click to collapse
Barin offered you to try this Titan flasher with your Radar - it will work.
AndrewSh said:
Barin offered you to try this Titan flasher with your Radar - it will work.
Click to expand...
Click to collapse
tried it. it stopped at 5% on phone, 6% on PC. must be my Radar... tried using a Radar RUU with same luck. my Radar won't boot out of the Bootloader. had ordered a y-cable, was going to try Goldcard method.

Categories

Resources