Bootloader blocked - 7 Mozart General

Hello and sorry for my english.
I have a Mozart phone but the phone is blocked on bootloader with only one line that say "PD67100 SS-BC (4k)"
no "serial" or "usb" write...
No hard resert possible.
How to resolve this problem ?
Thank

WAIT ....
same problem .. but no solution for now ... we have to wait

boot loader blocked
same here no usb no serial

That is interesting to see...What countries, networks, branded or otherwise did you get the phone with?

My phone is on Orange France.

I just look at mine - it is the same loader,
From my experience the Boot loader screen should always display Serial, even when not connected to a computer. In my 7 years of supporting HTCs - I have never seen the issue you describe.

I've got the same problem.
If anyone will find solution of that problem please write it here.

Same prob here on HTC unbranded version. Hard Reset and Checksum possible, but no usb-connection in bootloader.

I am also having the same problem. = / No connects bootloader mode.

same problem:
just without vender id. instead pd67100 there are differend characters.

I think this happens coz of RSPL/HSPL hack
I don't really like flashing these roms as they may result in destroying your phone.
I just like ROMs coming from ansar.
I hope you all find a solution.

As long as your are careful and follow the guides and read everything then there should be no issues with flashing ROMS to devices "ansar" ones or otherwise.

Hi all ,i have the same problem ,on my screen i read only
PD67100 SS-BC (4K) ,nobodys know a solution at this problem?

"PD67100 SS-BC (4K)"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
means your device now in half brick condition, and not yet solution till now (but it with jtag it may possible i think)
for this question or similar with that, please refer to this thread and make sure you read carefully missing step or instruction can make our mozart going brick or maybe half brick
Cotulla said:
Issues with MANGO RUU ROMS.
List of such ROMs:
It's not full list. Maybe some other ROMs affected by this too.
Thread about this ROMs.
RUU_Gold_S_HTC_Europe_3.02.401.01_Radio_5.69.09.29 a_22.50.50.21_Signed_GOLD_RELEASE.exe
RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe
RUU_Mozart_S_HTC_RUS_4.06.411.00_5.69.09_RELEASE.e xe
RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.0 9.29a_22.50.50.21_Signed_SCHUBERT_RELEASE.exe
RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE .exe
About issue:
After running RSPL on MANGO OSPL, you can't flash device via SPL.
Windows Phone 7 OS is still booting and working.
Instead of full SPL screen you will see only one the first line:
You device will be "HALF BRICKED", because you can use OS, but can't flash anything else.
At the current moment it's IMPOSSIBLE to recover such devices. And I am not sure it will be ever possible.
What you must NOT do:
Before running RSPL wizard check your SPL screen.
There current SPL version at top: "X.Y.Z 2250 "
When wizard asks you to choose your current SPL version, be sure it's present inside versions list.
If your current SPL version doesn't present in the list, you can choose nearest version, BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
Generally it means that you must NOT run RSPL wizard after MANGO RUU ROM installation. You must flash older version (with 7004 or NoDo) and then run RSPL.
Installed OS version doesn't important. Only SPL version important.
Click to expand...
Click to collapse

Does anyone know if this problem can be solved using the GoldCard?

Hello ,any news about this problem?

Nicolas Alves said:
Does anyone know if this problem can be solved using the GoldCard?
Click to expand...
Click to collapse
I've been told that Goldcard will not help to replace the SPL with an older version so won't get you out of the situation that stops you flashing ROMs of your choice. However, I would expect it to still be possible to use Goldcard to change a ROM.

f
The only way to unlock the boot via jtag repair. Tested and works on Mozart,

Fixed!!
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version

thecraziest77 said:
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version
Click to expand...
Click to collapse
Nothing like that here - just says up-to-date. Which ROM did you use before?

Related

from dump rom to tytn

Hi to all
Its possible extract a rom from a tytn and install this rom so other tytn???
or we must use the ship version???
if it is possible how can we extract a rom and how we can convert it to flashable rom???
Thx
Short answer: It is not possible yet, you must wait for a shipped version.
Long answer: A ROM consists of 7 parts:
1. Extended ROM
2. OS Image
3. IPL (part of bootloader)
4. SPL (part of bootloader)
5. Splash screen
6. HTC Logo (normally uses the same image as the splash screen)
7. GSM radio code
You can dump the original rom, but only the things contained in the FLASH will be dumped, this does not include the IPL, SPL, splash and radio parts, so its unuseful for flashing it back.
I've updated the wiki with this answer, see here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
Thx
For the Vv (very very) clear answer...
Please Help
Hey pof.
I was wondering if you could point me in the right direction with my problem.
I've tried to upgrade my HTC Tytn original ROM to JasJam ROM , right at the end (99%) the updating software stoped , gave me an error and restarted the computer. Now all i see on my tytn is dots with mixed colours all over the screen(not even a tri-color mode) it looks like a broken tv. Now i can't even sync it with my PC to install old ROM. Can't do anything with it now. the reason for this i guess is a ROM update that wasn't completed.
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Please help. Iam really desperate
slava888 said:
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Click to expand...
Click to collapse
Does it look like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) try SD card flashing:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
2) If it doesn't work, put the unit in bootloader mode, disable activesync usb on your computer (Connection settings -> disable USB connection) and try to flash a ROM using the usual method.
Other than this... I can only tell you trying to get a repair under warranty
Hey pof. Thanks for the quick reply.
That is exactly how it looks !
Listen, somehow i've managed to get in to bootloader.
It shows on top:
HERM200
IPL-1.01
HERM200
SPL-1.04
I've tried to do the SD Rom update but it doesn't work. Just shows me the same bootloader screen with those two messages(above). Pushing the powere button doesn't do anything
The bootloader update didn't work either. when i typed in "set 14 0" it said "Write Nand Success" but when i soft reseted it , it still gave me that screen.
Any ideas what i can do? other then send it for repairs.
Thanks again.
Hope to hear from u soon.................iam freaking out here
Just tried SDCardFlashing with different ROM files.
With the original ROM it does not do anything (stays in the bootloader screen)
With JasJam (that's the one i've tried to install) it show "checking..." message on screen , but does not do anthing.............been like that for 10 minutes.
Can't believe i've screwed up so bad
At least bootloader is still "intact", the right NBH file should be the one matching your CID, assuming that you have a TyTN it should be the TyTN 1.18 rom.
If you can go into bootloader and send commands using mtty check your CID with command "info 2".
Also try to do a rom upgrade using the usual proces while the unit is connected in bootloader mode and activesync usb disabled, click on RomUpgradeUt.exe, then Next ,next, next... if it fails tell me which error you get and where.
Hey Pof.
when i try "info 2" command , it just hangs without any output. and i can no longer type in commands.
I've tried to run RomUpgradeUt.exe
This produced ERROR[222]: DEVICE NOT RESPONDING. I get it at the end , after the updater asks me for final confirmation.
...............................
Read this thread, from post #11 until the end
http://forum.xda-developers.com/showthread.php?t=278025
Try to put USB monitor (instructions on post #11) and see if you get any output from the device... attach the USB capture here if you want, I can have a look at it.
Hey Pof.
Did everything like you said.
Here is the output.
P.S: didn't allow me to upload WinAce archived files so i upload the text file, its pretty small.
slava888 said:
Did everything like you said.
Here is the output.
Click to expand...
Click to collapse
The RUU sends "task 32 ; info 2 ; info 3" commands to bootloader, but you get no output from it, I think it's screwed because none of the three commands is answered by your device.
Normally, task 32 should return the seclevel, usually 0xFF ; info 2 should return the CID (in TyTN it is QTEK_001) and info 3 should return the block to calculate the dynamic password to be able to use wdatah command. Without wdatah you cannot flash
Do you have warranty on your device?
Yes its still under waranty , i purchased the device couple of weeks ago. Iam going to call them today.
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Just wanted to tell you that i really appreciate your effort. Thank you for everything.
slava888 said:
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Click to expand...
Click to collapse
HTC has not "officially" released any rom for the hermes yet, the tytn rom we have on the ftp is leaked from dangaard NL, so you cannot say you've been trying to upgrade the rom because they will tell you there are no rom upgrades available yet.
If you are not in a hurry to have your phone back you can wait until they release a ROM upgrade and then tell them the "truth"... but i don't know if they will be able to see that you flashed Imate ROM and not HTC ROM (and flashing another brand's rom voids your warranty). If they don't notice it, the repair should be under warranty and no charges for you.
If you are in hurry, just tell them you tried to flash the imate jasjam rom (downloaded from imate ftp) and phone screwed, they will charge you some money to repair / flash back the original htc rom on your device and return it to you, but you'll have to pay because this is not covered by the warranty.
I don't know how much will they charge you for this, but you can explain them by phone and ask...

Unlock unsuccessful, please help.

hi,guys.
i just got my spv m3100 yesterday. followed the instruction provided on this forum and yet i got the Unlock success message on my phone.
I thought the phone has been sim-unlocked, however, when i try to put on another sim card which is not from orange, it gave me the following message:
"You have tried 5 times, please wait until timeout..."
_____________ (should enter code here)
|OK| |Emergency|
i also tried to put the unlock code: "If the phone requests unlock code when you put a locked SIM, the code is: 22051978."
and it said that is an invaild code. can anyone help?
thanks
Please confirm that you have flashed the patched Radio ROM correctly.
You can do this by clicking Settings---->System----->Device Information.
Radio version should read 1.16.00
If not then retry the flash again.
Regards
S.K.
hi, silent...thanks for the advise.
i did servral time rom flash again however, after i reset the device after the error message. the rom version still 1.06, the same.
what do i do about it? i am sure i followed the instruction...just don't know where i did wrong...thanks
here some more information about my device:
Rom Version: 1.23.61.4
Rom Date: 07/13/06
Radio Version: 1.06.00.00
Ok
The unlocker is not working because the radio is not flashing correctly.
Firstly lets just make sure that you are running the correct bootloader and Orange Uk haven't updated their devices with a new ROM.
Put your device into bootloader mode, do this by pressing power+ok button together and then soft reset (while buttons are still pressed).
EDIT: Ensure its Ok button on side of device, not ok button next to d-pad
Should now see a screen with coloured blocks and some information on screen.
Post here what it says after SPL
Regards
S.K.
thanks for the advise again.
i did confirm the bootloader before i do the flash, but i checked it again. here is the info.
HERM100
IPL - 1.01
HERM100
SPL-1.04
THANKS
hi..i tried few times again but it still won't flash the Radio. By the way, i am using the Windows installed by Parallels on MacBook. Would that be the problems? cause the bootloader is 1.04 but it just doesn't work. i really don't know why..also, the RUU is not getting the information from my devis either.
here is some pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Search the forum for enter simlock code thru MTTY.EXE.
Are you flashing with phone booted in OS or are you flashing from Bootloader??
hi..i was doing the flash from Bootloader.
after some research i known some people have the problems too...also i tried the command method from POF but can not get the "0" message...
sologuy said:
hi..i tried few times again but it still won't flash the Radio. By the way, i am using the Windows installed by Parallels on MacBook. Would that be the problems?
Click to expand...
Click to collapse
Definitely! Try either booting into windows directly or using an actual PC for the radio reflash.
Richard
hi..thank you for all your guys help..finally i got my m3100 cracked on a formal PC. definitely is the macbook problem. thanks again for the help.
sologuy said:
hi..thank you for all your guys help..finally i got my m3100 cracked on a formal PC. definitely is the macbook problem. thanks again for the help.
Click to expand...
Click to collapse
Good deal! I think the Boot Camp thingie or whatever Apple calls booting full real Windoze should work, but using a PC is safer Glad you're unlocked!
Richard

Problem with IPL/SPL 3.08 -> brick!!!

Hello,
I have a G3 with Underground WM6 rom. i upgraded IPL/SPL 3.08, and now it is stoped in the boot screen. I downgraded to the rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE for down the IPL/SPL but it's only down the IPL. SPL always 3.08
Please help me ASAP
Thank you so much.
RClub said:
Hello,
I have a G3 with Underground WM6 rom. i upgraded IPL/SPL 3.08, and now it is stoped in the boot screen. I downgraded to the rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE for down the IPL/SPL but it's only down the IPL. SPL always 3.08
Please help me ASAP
Thank you so much.
Click to expand...
Click to collapse
First of all if you have a G3 why are you posting in the G4 subforum?
Why do you need to downgrade the SPL? Aren't you already CID unlocked, according to your post you have a custom rom installed?
You could try to flash a FULL Official Carrier rom to try to overwrite your bootloaders with an older version. Don't know if there are commands disabled in the new bootloaders to prevent this from happening though.
As long as you can get to the bootloader your phone isn't dead. Whenever this happens to me I always recover to an official carrier rom then proceed to the custom rom of my choice.
Sorry,
I think downgrade SPL for compatible with official rom (O2 2.21), i trying it but now i cant upgrade this rom
it is still in the bootloaders, so i know my G3 isn't dead
here it is, silent...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Please save me...
tell me, if hard reset tells you format failed.
nothin said:
tell me, if hard reset tells you format failed.
Click to expand...
Click to collapse
Yes, i'm sure. I make hard reset and it reports format failed
i found method for this, its used with G3, so we need confirmation to be sure, if it may help you too.... it "shouldnt" be dangerous...but better wait for reply of masters here...i saved my machine with that one...
my english is so damn poor...forgive me,please...
method:
-you need to format sd card to fat16(fat)
-kill wcescomm process from task manager on pc,
-find program named romupdate.exe, or mtty.exe
-go into bootloader mode, and plug wizard on usb,
-find in options of mtty(romupdate.exe) port, choose \\.\WCEUSBSH001
-now, press enter on main screen of mtty(romupdate),
-on >CMD type r2sd - it will make special header(and copy of os too, but its less important) which may help to make format with other method,
-wait 'till process ends,
-softreset pocket to get into bootloader mode...and do what machine says, its other method for format, when it ends, it "may" boot normally after softreset(you may try to do hard reset to confirm), even if it is not booting, format will let you to flash once more.
if it is stuck on bootscreen again, find info about rescue flash, now, it should be possible after that "format". If hard reset says "format failed" you wil not be able to flash anything - if it is not, you may do wantever you need, so try to flash wizard love, then any ROM with shelltool(yup yup its not typical for g3, but for me its ONLY method)..
i am not sure, if its useful..i saved one machine by that method...
Thank you Nothin,
I take your solution and its reports in the cmd>
"***** user area size = 0x1EC80000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image"
...the phone is cid locked
i must go to imei-check?
damn, i was hoping you will not see this damn thing
btw command to mtty is: r2sd os ...
i am not sure what now..
try to RUU dopod ROM, maybe what is able to be overwritten will lead you to use mtty r2sd os ....
http://pda.oleyek.com/ROM/Others/RUU_Prodigy_1070302_103_10703102_CMCC_CHS_Ship.exe
it is known as CIDlock remover... , do not ak me, if it works... i flashed this and mtty method was usable for me...
btw i have identical machine as you, i think.
strange, that old users arent trying to help, they surely know 100% methods.. ..... :S
maybe you need such topic inside wm06?
btw, mtty method is linked to awizard info, so maybe this link will be useful...
http://forum.xda-developers.com/showthread.php?t=258819
Hi Nothin,
i updated this ship rom dopod, now the os is 1.7.13.3, ipl 1.07, spl 3.08 , gsm 01.13.10
but i cant use mtty.exe, it reports same answer
any ideas?
thank you Nothin
i am trying to get info about that... but i must wait for replies on other forum....
i wish i could help
i am wondering...damn where are the others...whole forum is asleep?
have you tried flashing official ROM for o2? then mtty?
i am interested in solving that problem - it may be helpful knowledge...
upd: tell me, how did You format card (fast format, normal)?
it may be difference with format method. Do slower, normal format of sd, then try mtty.
and it MUST be fat 16.
of course, remember about activesync kill etc...
upd...
overall conclusion is imei ....
you probably read that topics...
http://forum.xda-developers.com/showthread.php?t=276963
http://forum.xda-developers.com/sho...evel+to+download+a+specific+image#post1282309
Nothin,
it's very strange, the phone is O2, but i cannot flash the ship rom O2 Xda_MiniS_LaunchROM_v154102 and Xda_Minis_Upgrade_v2.21.4.101 nothing.
Yes, i format the SD card in normal mode, and choose FAT(FAT16). I'm sure i killed activesync, for find \\.\WCEUSBSH001 in the port on mtty
If we havent other way, i'll go to imei-check.co.uk
TY
I have some trouble too
wait for few hours..there "may" be method...
womchik , method with mtty did not help? same "format failed/not enough permission?
yes
I tried 3 miniSD card
I have lock_backup.bin and cidunlocked.bin files. Is it helps me?
Uhm ... ahm ... snurt!
3.08 SPL/IPL are bad Converted from Charmer. If you Flash your Phone with this Firmware ... your Phone think its a Charmer!! No Original Vendor Firmware works with this SPL Version.
I have reflash a old SPL Version via imei-check.co.uk but i have a G4 Prophet. Try to use IMEI Unlock for Charmer ... and hope it works if not talk with imei-check.co.uk. They have a Special Updater and they Flash a Old SPL for you.
Charmer unlocks with lockwiz/aWizard ?
BootScreen is no need for unlock ?
Or may be I'm wrong ?
Try it ... i have a G4 and no CID Unlocker works on it ... this is why i only can say ... if you cant fix it ... talk with imei-check
try what? lockwiz? I tried unlocking in bootscreen many-many times
may be I can upload cidunlocked.bin back to device?
NetrunnerAT said:
I have reflash a old SPL Version via imei-check.co.uk but i have a G4 Prophet. Try to use IMEI Unlock for Charmer ... and hope it works if not talk with imei-check.co.uk. They have a Special Updater and they Flash a Old SPL for you.
Click to expand...
Click to collapse
Can you tell me more details,please?
Thank you

how to flash any ROM to CID locked

Hi all
I was sick waiting for cid unlock for (t-mobile ameo – dutch),
So I used modified tools from http://forum.xda-developers.com/showthread.php?t=299154
to force writing Windows.nb ,just changed the bat file to write the new OS and it worked, my Athena now has English OS from RUU_Athena_HTC_WWE_1.25.405.2_1.38.00
the modified tool is here
http://www.aczua.com/Athena_upgrade.rar
(use @ your own risk)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
sorry not yet, needs the wm6 XIP but wm5 cooking can happen
can this remove the sim/network lock as well?
So then the question is: What is the best ROM out there... the AMEO, Dopod or HTC?
lawbet7eb, can i first thank you for the doing this for the ameo/dopod/advantage communities. Could you please inform me or point me to the correct link which will show me how to use this tool, thank-you.
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
Thanks for the link fallenczar. This is great news indeed. Is this now officially CID unlocked? Or just a way of forcing a flashing of another ROM?
CAN U please provide with more deatils of how did u do it !!! we all appretiate it hoop that u can say how to upgrade to english waited something like this for a long time THANKS ALOT !!!
Its NOT Cid unlocked, it uses some utilities by itsme to write directly to the NAND flash that the OS is stored in
Is it possible flashing the device fromout the bootloader screen? Or must the device be connected en synched using activesync?
Regards
Vince
Can anyone modify the files to flash radio..I know that if we flash POF's 1.16 Radio of Hermes, it makes the device Super CID..
Tried, but doesn't work...pls others post the results
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
hdubli said:
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
Click to expand...
Click to collapse
what do you mean by great discovery?..do you manage to flash the radio?
you cant flash radio like this.
Can someone add the procedure to the wiki and does it mean that now i can flash my english ameo with a unbranded htc athena rom ?
Take it easy friends...it needs to be safe for all to use..
Guys I'm all for progress and this going in the right direction, but it is NOT properly CID unlocked. Be very careful peeps before someone bricks their device!
This is why we have set up the Athena project, to avoid this and get some pro's to help us.
I hope everyone agrees that Midget_1990 should be on board as he is experienced with ROM cooking and the likes for the VGA 3G Universal and is the only xda developer who has showed an active interest in our forum.
if you read the link from arti upgrade you will get the picture,
it could be risky to force OS with this procedure as we all know that there is a problem with athena cutting connection, read this:-
http://forum.xda-developers.com/showthread.php?t=298259
if athena cuts and upgrade was not complete, u can reflash with original rom.
another thing, this upgrades only the OS, not radio, ipl spl...etc, AND IT WILL NOT MAKE ATHENA CID-UNLOCKED
i believe we all should join The Athena Project @ http://forum.xda-developers.com/showthread.php?t=311651
there is nothing like SuperCID Athena
I heard from somebody that there was a way to CID unlock an Ameo with the old original radio ROM from T-Mobile. You had to flash back to an early Radio, then you could remove CID lock (or the early radio didnt have a CID lock in it). Then you could flash a normal Athena Radio back into it. He was vague about it but promised to email me the full procedure. He never did.
Is this worth looking into?
thanks to lawbet..now i have a full english version rom...
i first attempt was stucked..but then tried again using hdubli instruction...i`m happy right now untill we get cid unlock...
cheers..

[Q] PB81

Anyone, any ideas?
Quite some time ago, when HD2 was brand new, there were some people around with unofficial beta-ROMs on their devices. Don´t exactly know what was going on, but I am quite sure the search function will bring this or that into light for you.
Maybe flashing with a Goldcard might help, not sure. But apparently, your SPL seems to face troubles, no wonder you´ve got freezes etc.
Did you try to flash something older than the 3.14 stock ROM? A lot of users are not happy with this anyway...
Also, older SIM cards or some SD cards can cause issues, did you try to flash without those in the device?
I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.
Bruno Kreisky said:
I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.
Here is the picture from working HD2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here is picture from non-working HD2
As you can see, the difference is in first line "PB 81100" and "PB 81***" I think I have to improve here but not glue how to???
Update:
And now it becomes really strange. I already flashed the strange phone with Stock ROM from SD-Card so you can see above. After that I did a flash with latest ARTEMIS ROM and SSPL_RUU and the following Boot Screen appears
So before flashing there was SPL 3 on phone, while flashing there was SPL1.42.6666 on phone and after flashing there is SPL 3 again on phone???
Click to expand...
Click to collapse
Sir, SSPL works only for 1 (one) cycle. After you reboot the phone, your SPL will return to the original one (the one before SSPL).
SPL 1.42.6666 is only a temporary SPL modifying your actual/original SPL.
Cheers
Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?
Bruno Kreisky said:
Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?
Click to expand...
Click to collapse
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers
silverwind said:
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers
Click to expand...
Click to collapse
As I wrote above (maybe bad english), I flashed both mobiles with latest Stock-Rom (downloaded from htc.com/de) via, SD-card. Both mobiles were sold from same Mobile provider in austria with same SIM-lock. But, they were un-SIM-locked differently. Now, one is working smoothly (the one with PB81100) and one freezes almost (the one with PB81***) and GPS is working really, really badly in comparison to the other one.
EDIT: GPS is completly NOT working on device with PB81*** on Boot-Screen :-(
Push this thread!
hi,
i have also an htc hd2 from "3" in austria.
i flasht it to hspl 2.08 without any problems.
but! since i let it unlock it in a mobile-store here in vienna.
the model ID- is now "PB81xxxx".
and now: it is not possible to flash it back.
here are the pics:
pocketpc.ch/htc-hd2-rom-upgrade/126754-sim-sntsperren-kein-flashen-mehr-moeglich.html#post990530
it seams the cnaged the model _ID during unlocking.

Categories

Resources