Hello,
I have a G3 with Underground WM6 rom. i upgraded IPL/SPL 3.08, and now it is stoped in the boot screen. I downgraded to the rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE for down the IPL/SPL but it's only down the IPL. SPL always 3.08
Please help me ASAP
Thank you so much.
RClub said:
Hello,
I have a G3 with Underground WM6 rom. i upgraded IPL/SPL 3.08, and now it is stoped in the boot screen. I downgraded to the rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE for down the IPL/SPL but it's only down the IPL. SPL always 3.08
Please help me ASAP
Thank you so much.
Click to expand...
Click to collapse
First of all if you have a G3 why are you posting in the G4 subforum?
Why do you need to downgrade the SPL? Aren't you already CID unlocked, according to your post you have a custom rom installed?
You could try to flash a FULL Official Carrier rom to try to overwrite your bootloaders with an older version. Don't know if there are commands disabled in the new bootloaders to prevent this from happening though.
As long as you can get to the bootloader your phone isn't dead. Whenever this happens to me I always recover to an official carrier rom then proceed to the custom rom of my choice.
Sorry,
I think downgrade SPL for compatible with official rom (O2 2.21), i trying it but now i cant upgrade this rom
it is still in the bootloaders, so i know my G3 isn't dead
here it is, silent...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Please save me...
tell me, if hard reset tells you format failed.
nothin said:
tell me, if hard reset tells you format failed.
Click to expand...
Click to collapse
Yes, i'm sure. I make hard reset and it reports format failed
i found method for this, its used with G3, so we need confirmation to be sure, if it may help you too.... it "shouldnt" be dangerous...but better wait for reply of masters here...i saved my machine with that one...
my english is so damn poor...forgive me,please...
method:
-you need to format sd card to fat16(fat)
-kill wcescomm process from task manager on pc,
-find program named romupdate.exe, or mtty.exe
-go into bootloader mode, and plug wizard on usb,
-find in options of mtty(romupdate.exe) port, choose \\.\WCEUSBSH001
-now, press enter on main screen of mtty(romupdate),
-on >CMD type r2sd - it will make special header(and copy of os too, but its less important) which may help to make format with other method,
-wait 'till process ends,
-softreset pocket to get into bootloader mode...and do what machine says, its other method for format, when it ends, it "may" boot normally after softreset(you may try to do hard reset to confirm), even if it is not booting, format will let you to flash once more.
if it is stuck on bootscreen again, find info about rescue flash, now, it should be possible after that "format". If hard reset says "format failed" you wil not be able to flash anything - if it is not, you may do wantever you need, so try to flash wizard love, then any ROM with shelltool(yup yup its not typical for g3, but for me its ONLY method)..
i am not sure, if its useful..i saved one machine by that method...
Thank you Nothin,
I take your solution and its reports in the cmd>
"***** user area size = 0x1EC80000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image"
...the phone is cid locked
i must go to imei-check?
damn, i was hoping you will not see this damn thing
btw command to mtty is: r2sd os ...
i am not sure what now..
try to RUU dopod ROM, maybe what is able to be overwritten will lead you to use mtty r2sd os ....
http://pda.oleyek.com/ROM/Others/RUU_Prodigy_1070302_103_10703102_CMCC_CHS_Ship.exe
it is known as CIDlock remover... , do not ak me, if it works... i flashed this and mtty method was usable for me...
btw i have identical machine as you, i think.
strange, that old users arent trying to help, they surely know 100% methods.. ..... :S
maybe you need such topic inside wm06?
btw, mtty method is linked to awizard info, so maybe this link will be useful...
http://forum.xda-developers.com/showthread.php?t=258819
Hi Nothin,
i updated this ship rom dopod, now the os is 1.7.13.3, ipl 1.07, spl 3.08 , gsm 01.13.10
but i cant use mtty.exe, it reports same answer
any ideas?
thank you Nothin
i am trying to get info about that... but i must wait for replies on other forum....
i wish i could help
i am wondering...damn where are the others...whole forum is asleep?
have you tried flashing official ROM for o2? then mtty?
i am interested in solving that problem - it may be helpful knowledge...
upd: tell me, how did You format card (fast format, normal)?
it may be difference with format method. Do slower, normal format of sd, then try mtty.
and it MUST be fat 16.
of course, remember about activesync kill etc...
upd...
overall conclusion is imei ....
you probably read that topics...
http://forum.xda-developers.com/showthread.php?t=276963
http://forum.xda-developers.com/sho...evel+to+download+a+specific+image#post1282309
Nothin,
it's very strange, the phone is O2, but i cannot flash the ship rom O2 Xda_MiniS_LaunchROM_v154102 and Xda_Minis_Upgrade_v2.21.4.101 nothing.
Yes, i format the SD card in normal mode, and choose FAT(FAT16). I'm sure i killed activesync, for find \\.\WCEUSBSH001 in the port on mtty
If we havent other way, i'll go to imei-check.co.uk
TY
I have some trouble too
wait for few hours..there "may" be method...
womchik , method with mtty did not help? same "format failed/not enough permission?
yes
I tried 3 miniSD card
I have lock_backup.bin and cidunlocked.bin files. Is it helps me?
Uhm ... ahm ... snurt!
3.08 SPL/IPL are bad Converted from Charmer. If you Flash your Phone with this Firmware ... your Phone think its a Charmer!! No Original Vendor Firmware works with this SPL Version.
I have reflash a old SPL Version via imei-check.co.uk but i have a G4 Prophet. Try to use IMEI Unlock for Charmer ... and hope it works if not talk with imei-check.co.uk. They have a Special Updater and they Flash a Old SPL for you.
Charmer unlocks with lockwiz/aWizard ?
BootScreen is no need for unlock ?
Or may be I'm wrong ?
Try it ... i have a G4 and no CID Unlocker works on it ... this is why i only can say ... if you cant fix it ... talk with imei-check
try what? lockwiz? I tried unlocking in bootscreen many-many times
may be I can upload cidunlocked.bin back to device?
NetrunnerAT said:
I have reflash a old SPL Version via imei-check.co.uk but i have a G4 Prophet. Try to use IMEI Unlock for Charmer ... and hope it works if not talk with imei-check.co.uk. They have a Special Updater and they Flash a Old SPL for you.
Click to expand...
Click to collapse
Can you tell me more details,please?
Thank you
Related
Hi to all
Its possible extract a rom from a tytn and install this rom so other tytn???
or we must use the ship version???
if it is possible how can we extract a rom and how we can convert it to flashable rom???
Thx
Short answer: It is not possible yet, you must wait for a shipped version.
Long answer: A ROM consists of 7 parts:
1. Extended ROM
2. OS Image
3. IPL (part of bootloader)
4. SPL (part of bootloader)
5. Splash screen
6. HTC Logo (normally uses the same image as the splash screen)
7. GSM radio code
You can dump the original rom, but only the things contained in the FLASH will be dumped, this does not include the IPL, SPL, splash and radio parts, so its unuseful for flashing it back.
I've updated the wiki with this answer, see here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeFAQ
Thx
For the Vv (very very) clear answer...
Please Help
Hey pof.
I was wondering if you could point me in the right direction with my problem.
I've tried to upgrade my HTC Tytn original ROM to JasJam ROM , right at the end (99%) the updating software stoped , gave me an error and restarted the computer. Now all i see on my tytn is dots with mixed colours all over the screen(not even a tri-color mode) it looks like a broken tv. Now i can't even sync it with my PC to install old ROM. Can't do anything with it now. the reason for this i guess is a ROM update that wasn't completed.
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Please help. Iam really desperate
slava888 said:
I've tried to use bootloader but it didn't give an 'USB' option. just com1 and com2.
Click to expand...
Click to collapse
Does it look like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) try SD card flashing:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
2) If it doesn't work, put the unit in bootloader mode, disable activesync usb on your computer (Connection settings -> disable USB connection) and try to flash a ROM using the usual method.
Other than this... I can only tell you trying to get a repair under warranty
Hey pof. Thanks for the quick reply.
That is exactly how it looks !
Listen, somehow i've managed to get in to bootloader.
It shows on top:
HERM200
IPL-1.01
HERM200
SPL-1.04
I've tried to do the SD Rom update but it doesn't work. Just shows me the same bootloader screen with those two messages(above). Pushing the powere button doesn't do anything
The bootloader update didn't work either. when i typed in "set 14 0" it said "Write Nand Success" but when i soft reseted it , it still gave me that screen.
Any ideas what i can do? other then send it for repairs.
Thanks again.
Hope to hear from u soon.................iam freaking out here
Just tried SDCardFlashing with different ROM files.
With the original ROM it does not do anything (stays in the bootloader screen)
With JasJam (that's the one i've tried to install) it show "checking..." message on screen , but does not do anthing.............been like that for 10 minutes.
Can't believe i've screwed up so bad
At least bootloader is still "intact", the right NBH file should be the one matching your CID, assuming that you have a TyTN it should be the TyTN 1.18 rom.
If you can go into bootloader and send commands using mtty check your CID with command "info 2".
Also try to do a rom upgrade using the usual proces while the unit is connected in bootloader mode and activesync usb disabled, click on RomUpgradeUt.exe, then Next ,next, next... if it fails tell me which error you get and where.
Hey Pof.
when i try "info 2" command , it just hangs without any output. and i can no longer type in commands.
I've tried to run RomUpgradeUt.exe
This produced ERROR[222]: DEVICE NOT RESPONDING. I get it at the end , after the updater asks me for final confirmation.
...............................
Read this thread, from post #11 until the end
http://forum.xda-developers.com/showthread.php?t=278025
Try to put USB monitor (instructions on post #11) and see if you get any output from the device... attach the USB capture here if you want, I can have a look at it.
Hey Pof.
Did everything like you said.
Here is the output.
P.S: didn't allow me to upload WinAce archived files so i upload the text file, its pretty small.
slava888 said:
Did everything like you said.
Here is the output.
Click to expand...
Click to collapse
The RUU sends "task 32 ; info 2 ; info 3" commands to bootloader, but you get no output from it, I think it's screwed because none of the three commands is answered by your device.
Normally, task 32 should return the seclevel, usually 0xFF ; info 2 should return the CID (in TyTN it is QTEK_001) and info 3 should return the block to calculate the dynamic password to be able to use wdatah command. Without wdatah you cannot flash
Do you have warranty on your device?
Yes its still under waranty , i purchased the device couple of weeks ago. Iam going to call them today.
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Just wanted to tell you that i really appreciate your effort. Thank you for everything.
slava888 said:
Can you please advice me on what should i tell to HTC customer support ppl as to why this whole mess happend to my handheld?
Click to expand...
Click to collapse
HTC has not "officially" released any rom for the hermes yet, the tytn rom we have on the ftp is leaked from dangaard NL, so you cannot say you've been trying to upgrade the rom because they will tell you there are no rom upgrades available yet.
If you are not in a hurry to have your phone back you can wait until they release a ROM upgrade and then tell them the "truth"... but i don't know if they will be able to see that you flashed Imate ROM and not HTC ROM (and flashing another brand's rom voids your warranty). If they don't notice it, the repair should be under warranty and no charges for you.
If you are in hurry, just tell them you tried to flash the imate jasjam rom (downloaded from imate ftp) and phone screwed, they will charge you some money to repair / flash back the original htc rom on your device and return it to you, but you'll have to pay because this is not covered by the warranty.
I don't know how much will they charge you for this, but you can explain them by phone and ask...
Hi all
I was sick waiting for cid unlock for (t-mobile ameo – dutch),
So I used modified tools from http://forum.xda-developers.com/showthread.php?t=299154
to force writing Windows.nb ,just changed the bat file to write the new OS and it worked, my Athena now has English OS from RUU_Athena_HTC_WWE_1.25.405.2_1.38.00
the modified tool is here
http://www.aczua.com/Athena_upgrade.rar
(use @ your own risk)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
sorry not yet, needs the wm6 XIP but wm5 cooking can happen
can this remove the sim/network lock as well?
So then the question is: What is the best ROM out there... the AMEO, Dopod or HTC?
lawbet7eb, can i first thank you for the doing this for the ameo/dopod/advantage communities. Could you please inform me or point me to the correct link which will show me how to use this tool, thank-you.
fallenczar said:
wow...
this is incredible news!!!
can someone else confirm this???
time for wm6 action on ameo!!!
do you mind giving me the link to the rom to uploaded ???
Click to expand...
Click to collapse
Thanks for the link fallenczar. This is great news indeed. Is this now officially CID unlocked? Or just a way of forcing a flashing of another ROM?
CAN U please provide with more deatils of how did u do it !!! we all appretiate it hoop that u can say how to upgrade to english waited something like this for a long time THANKS ALOT !!!
Its NOT Cid unlocked, it uses some utilities by itsme to write directly to the NAND flash that the OS is stored in
Is it possible flashing the device fromout the bootloader screen? Or must the device be connected en synched using activesync?
Regards
Vince
Can anyone modify the files to flash radio..I know that if we flash POF's 1.16 Radio of Hermes, it makes the device Super CID..
Tried, but doesn't work...pls others post the results
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
hdubli said:
OK..could flash..one needs to first hard Reset yr PPC, then install cert,rapi cabs, then swith off for 10 sec and reboot, then async run the batch file..works..great discovery..
Click to expand...
Click to collapse
what do you mean by great discovery?..do you manage to flash the radio?
you cant flash radio like this.
Can someone add the procedure to the wiki and does it mean that now i can flash my english ameo with a unbranded htc athena rom ?
Take it easy friends...it needs to be safe for all to use..
Guys I'm all for progress and this going in the right direction, but it is NOT properly CID unlocked. Be very careful peeps before someone bricks their device!
This is why we have set up the Athena project, to avoid this and get some pro's to help us.
I hope everyone agrees that Midget_1990 should be on board as he is experienced with ROM cooking and the likes for the VGA 3G Universal and is the only xda developer who has showed an active interest in our forum.
if you read the link from arti upgrade you will get the picture,
it could be risky to force OS with this procedure as we all know that there is a problem with athena cutting connection, read this:-
http://forum.xda-developers.com/showthread.php?t=298259
if athena cuts and upgrade was not complete, u can reflash with original rom.
another thing, this upgrades only the OS, not radio, ipl spl...etc, AND IT WILL NOT MAKE ATHENA CID-UNLOCKED
i believe we all should join The Athena Project @ http://forum.xda-developers.com/showthread.php?t=311651
there is nothing like SuperCID Athena
I heard from somebody that there was a way to CID unlock an Ameo with the old original radio ROM from T-Mobile. You had to flash back to an early Radio, then you could remove CID lock (or the early radio didnt have a CID lock in it). Then you could flash a normal Athena Radio back into it. He was vague about it but promised to email me the full procedure. He never did.
Is this worth looking into?
thanks to lawbet..now i have a full english version rom...
i first attempt was stucked..but then tried again using hdubli instruction...i`m happy right now untill we get cid unlock...
cheers..
Hi, I think wm6 or 6.1 roms have some common problems in all roms which can be discussed here.
I begin first :
I used to change rom by jumpspl and I didn't want hardspl ( i was spl 2.20)
but for the last cloudyfa rom i saw everywhere to use hardspl so i thought there will be problems if i don't do that
but after i hardspled my device to g3.4pda.... and used the new rom ,my device stays about 20 seconds on the spl showing page after each soft reset .
i remember this page went so quickly before that i couldn't read all of the numbers (ipl,spl,os,radio) in it
so the sof reset process takes a lot more time now.
i wanna ask if it is because of the new rom or the new cracked hardspl ?
and if it is the hardspl how can i change it back ?
To change back the HardSPL process, you will need to use an operator ROM such as the Orange WM5 ROM (it's available on the FTP, I'll find a link when I can).
You shouldn't need to HardSPL to flash a ROM, it is just more reliable that JumpSPL or SoftSPL in that once you've done it, it won't revert very easily.
oh my god . that's almost a bad news
i remember having a nvid rom which was used for the previous upgrade way.
i will use it when i wanna do my next rom upgrade.
so you think the spl is the reason for my 20s start up delay ?
by the way thank you as always for your kind answers.
i remember having a nvid rom which was used for the previous upgrade way.
Click to expand...
Click to collapse
I think the ROM can not be NVID as I don't think it'll reflash the SPL. I would recommend a vendor ROM as it will work (I have tried it).
so you think the spl is the reason for my 20s start up delay ?
Click to expand...
Click to collapse
I've only just noticed that delay, but probably something to do with the SPL.
ok so I will use one of the original jamin roms I have.
once again thanks and pardon me for another question :
since I am using roms above wm5 like 6 and 6.1 the batterystatus program wont do the cpuscaler thing which i used perfectly before.
I asked and tried a lot but could not get it to work. even tried to use XCPUScalar2007_v3-03 but it wanted a lot of testingand ...
I saw that you wrote @286 in signature , what do you use ?
if it's batterystatus can you give me your settings files
I was using Battery status (I use the 1.05 beta version, not sure if that helps) and it works flawlessly.
ok can you show me your setting for the two pages for overclocking or at least your xml setting file ?
another thing :
in the new cloudyfa rom the the bluetooth sound of the caller is much louder and i think that even the quality of the BT stereo music is higher,
but the volume of the caller sound from the device itself is significantly lower than before.
i remember that the previous builds had some tweak for the volume during the call, but in this one its not mentioned...
is this the reason ?
I've just flashed a ROM, so I will have to set up Battery status first and then I shall post screen shots.
I would suggest speaking to Cloudyfa, or putting a post in the ROM thread as it will probably get fixed faster.
useful info..
i'm really interested with the overclock..
i'll be watchin this thread..
Finally got around to it! Here are the screenshots. This is using BatteryStatus 1.05beta.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
great..
i'll try this soon i get back home
l3v5y said:
Finally got around to it! Here are the screenshots. This is using BatteryStatus 1.05beta.
Click to expand...
Click to collapse
thanks and I did all the settings on your pic.
but it stays like this:
i remember when it worked, there was another figure for cpu load near clock : 195/40
I think you need to enable the task manager feature, although I can look at that in more detail later...
Newbeeeeee Stuck with sound problem after upgrade
Hi,
I am newbee on this ROM upgrade issue. I tried to follow the upgrade guide as much as i could but after installing 3 or 4 WM6.1 ROM packages i fail to rectify one problem. That is the sound issue. Now even the midi tones set for the Ringing come with cutting. With increasing the volume it increases but this was not happening when i had the original WM5 installed. I fail to understand what step i am missing or there is some codec problem which i am failing to understand.
My steps are:-
(1) Hard SPL the device when connected with PC.
(2) Run the ROM_UpdateUtility_G4..... and wait
(3) Once the device shows 100% and PC gives success i remove the device its battery for 3sec and then softy reset it.
am i missing some important step
Sorry
Try this!
naumanx said:
Hi,
I am newbee on this ROM upgrade issue. I tried to follow the upgrade guide as much as i could but after installing 3 or 4 WM6.1 ROM packages i fail to rectify one problem. That is the sound issue. Now even the midi tones set for the Ringing come with cutting. With increasing the volume it increases but this was not happening when i had the original WM5 installed. I fail to understand what step i am missing or there is some codec problem which i am failing to understand.
My steps are:-
(1) Hard SPL the device when connected with PC.
(2) Run the ROM_UpdateUtility_G4..... and wait
(3) Once the device shows 100% and PC gives success i remove the device its battery for 3sec and then softy reset it.
am i missing some important step
Sorry
Click to expand...
Click to collapse
I think you should try to hard reset your device after flashing the ROM instead of just a soft reset.
Check out the WIKI page for prophet for how to hard reset your device!
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
Good luck!
// Ohamn
Good pardon but my Englishman is a villain like that that a translator uses .. I promise to study mas, good update my spl/ipl to 3.xx to install one wm6 work edition, but when my htc cingular finishes 8125 murio it(he,she) does not enter in bootloader does not answer please I ask you for help they have said to me that for the SD it is possible to install but I prefer consulting with the experts..
Probably the topic already was but my Englishman is a villain like that that I ask for the corresponding excuses.
Chile Becomes present. Urgent course of English...
I got cingular 8125 IPL/SPL problem
Please someone help me! My Cingular 8125 has died after an updat Wm6.1 to WM6.5, I was trying to install. All I got now is this screen. What should I have to do? (Sou brasileiro, estava tentando atualizar o wm6.1 p/ o wm6.5 e aconteceu isto, queria saber qual proggram devo instalar p/ reativar a comunicaçao c/ o Activesync?)
IPL 2.25.0001
SPL 2.25.0001
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download and install this "ROM"
Hi - i am in great trouble for long time... can you help !!!
MY rgb screen says IPL: 1.05 and SPL 3.08 (no more info on RGB Screen, only also USB when conn.) then when booting it shortly shows "Windows 6.1 SNN edition windows mobile" and then it cont. to next screen that freeze with this" IPL 1.05, SPL 3.08, GSM 02.25.11, OS 1.5.4.2, and text "Some Things Last Forever" and "From Button With Love"
it all started because i tried many things to upgrade from wm5 to wm6 and now im stucked with phone - can anyone figure out or is it bricked now - best regards, Peter
ps i will donate if help to work again - i am in Europe, Denmark but phone is from California.
Is the phone from Cingular or T-mobile?
You can try a hard reset by pressing and holding the CommManager key and the Voice dial key while doing a soft reset.
or
Download one of the listed ROMs.
Turn the phone off, press and hold the camera key, now insert the USB data cable, you must continue to press and hold the camera key until you see the boot loader screen.
On the boot loader screen you will see IPL SPL and on the bottom of the screen USB.
Now flash the ROM.
Cingular ROM
LINK ONE
LINK TWO
T-Mobile ROM
LINK ONE
LINK TWO
AFTER FLASH IPL/SPL MY DEVICE IS BOOT IPL 3.08.1, SPL 2.18.0001 AND AFTER RESTART IS DEAD.
HOW TO FLASH BACK IPL/SPL TO 2.18.0001?
PLEASE HELP!
my device T-Mobile MDA(US)
If the phone doesn’t boot at all, I don’t know how or if it can be fixed.
-MyHTC- said:
You can try a hard reset by pressing and holding the CommManager key and the Voice dial key while doing a soft reset.
or
Download one of the listed ROMs.
Turn the phone off, press and hold the camera key, now insert the USB data cable, you must continue to press and hold the camera key until you see the boot loader screen.
On the boot loader screen you will see IPL SPL and on the bottom of the screen USB.
Now flash the ROM.
Cingular ROM
LINK ONE
LINK TWO
T-Mobile ROM
LINK ONE
LINK TWO
Click to expand...
Click to collapse
Thanks MyHTC !
Do you think you can upload "Cingular ROM" also on www.4shared.com...because on rapidshare it seems that I have problem downloading ... (I am at the office now...and it looks like there are others that are downloading with the same IP)
Cingular 8125 bootloader screen
Hi HTC.... i am working on your given methods as my Cingular Phone is also stuck on green screen showing IPL/SPL/GSM/and OS
i am trying to connect it with computer so i can flash its ROM but my Wizard Service Tool say that device is not connected... can you help me for this....?
I love my this phone my lots of information is in it... important data will be lost if i couldn't solve it... please help me....
Regards
Sorry but if your phone can’t boot to window you won’t be able to recover your data.
-MyHTC- said:
Turn the phone off, press and hold the camera key, now insert the USB data cable, you must continue to press and hold the camera key until you see the boot loader screen.
On the boot loader screen you will see IPL SPL and on the bottom of the screen USB.
Now flash the ROM.
Click to expand...
Click to collapse
The instructions above will help you flash your phone but they won’t help you recover data.
zkako said:
Good pardon but my Englishman is a villain like that that a translator uses .. I promise to study mas, good update my spl/ipl to 3.xx to install one wm6 work edition, but when my htc cingular finishes 8125 murio it(he,she) does not enter in bootloader does not answer please I ask you for help they have said to me that for the SD it is possible to install but I prefer consulting with the experts..
Probably the topic already was but my Englishman is a villain like that that I ask for the corresponding excuses.
Chile Becomes present. Urgent course of English...
Click to expand...
Click to collapse
The translation is very bad. I would suggest that anyone posting questions through a translator should also include the question in their native language. That way, if the translation is bad, perhaps someone can offer an improved version.
In this case, I think the problem is either that there are eels in your hovercraft, or perhaps you have a G4 and bricked it by loading G3's IPL/SPL.
I don't know how to solve the first problem, but the second cannot be solved with the normal tools at hand. Good pardon.
Hi
Thank you for this post!
Even dough have been 3 and a half years since you posted this, I use it, and maybe I wouldn't say more than 10x. But as II have seen it is posted in the same day as mybday and your avatar is one of the photos I like to use with my HaX nick. So, thanks -MyHTC!
:good:
Hello and sorry for my english.
I have a Mozart phone but the phone is blocked on bootloader with only one line that say "PD67100 SS-BC (4k)"
no "serial" or "usb" write...
No hard resert possible.
How to resolve this problem ?
Thank
WAIT ....
same problem .. but no solution for now ... we have to wait
boot loader blocked
same here no usb no serial
That is interesting to see...What countries, networks, branded or otherwise did you get the phone with?
My phone is on Orange France.
I just look at mine - it is the same loader,
From my experience the Boot loader screen should always display Serial, even when not connected to a computer. In my 7 years of supporting HTCs - I have never seen the issue you describe.
I've got the same problem.
If anyone will find solution of that problem please write it here.
Same prob here on HTC unbranded version. Hard Reset and Checksum possible, but no usb-connection in bootloader.
I am also having the same problem. = / No connects bootloader mode.
same problem:
just without vender id. instead pd67100 there are differend characters.
I think this happens coz of RSPL/HSPL hack
I don't really like flashing these roms as they may result in destroying your phone.
I just like ROMs coming from ansar.
I hope you all find a solution.
As long as your are careful and follow the guides and read everything then there should be no issues with flashing ROMS to devices "ansar" ones or otherwise.
Hi all ,i have the same problem ,on my screen i read only
PD67100 SS-BC (4K) ,nobodys know a solution at this problem?
"PD67100 SS-BC (4K)"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
means your device now in half brick condition, and not yet solution till now (but it with jtag it may possible i think)
for this question or similar with that, please refer to this thread and make sure you read carefully missing step or instruction can make our mozart going brick or maybe half brick
Cotulla said:
Issues with MANGO RUU ROMS.
List of such ROMs:
It's not full list. Maybe some other ROMs affected by this too.
Thread about this ROMs.
RUU_Gold_S_HTC_Europe_3.02.401.01_Radio_5.69.09.29 a_22.50.50.21_Signed_GOLD_RELEASE.exe
RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe
RUU_Mozart_S_HTC_RUS_4.06.411.00_5.69.09_RELEASE.e xe
RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.0 9.29a_22.50.50.21_Signed_SCHUBERT_RELEASE.exe
RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE .exe
About issue:
After running RSPL on MANGO OSPL, you can't flash device via SPL.
Windows Phone 7 OS is still booting and working.
Instead of full SPL screen you will see only one the first line:
You device will be "HALF BRICKED", because you can use OS, but can't flash anything else.
At the current moment it's IMPOSSIBLE to recover such devices. And I am not sure it will be ever possible.
What you must NOT do:
Before running RSPL wizard check your SPL screen.
There current SPL version at top: "X.Y.Z 2250 "
When wizard asks you to choose your current SPL version, be sure it's present inside versions list.
If your current SPL version doesn't present in the list, you can choose nearest version, BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
Generally it means that you must NOT run RSPL wizard after MANGO RUU ROM installation. You must flash older version (with 7004 or NoDo) and then run RSPL.
Installed OS version doesn't important. Only SPL version important.
Click to expand...
Click to collapse
Does anyone know if this problem can be solved using the GoldCard?
Hello ,any news about this problem?
Nicolas Alves said:
Does anyone know if this problem can be solved using the GoldCard?
Click to expand...
Click to collapse
I've been told that Goldcard will not help to replace the SPL with an older version so won't get you out of the situation that stops you flashing ROMs of your choice. However, I would expect it to still be possible to use Goldcard to change a ROM.
f
The only way to unlock the boot via jtag repair. Tested and works on Mozart,
Fixed!!
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version
thecraziest77 said:
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version
Click to expand...
Click to collapse
Nothing like that here - just says up-to-date. Which ROM did you use before?