hi,guys.
i just got my spv m3100 yesterday. followed the instruction provided on this forum and yet i got the Unlock success message on my phone.
I thought the phone has been sim-unlocked, however, when i try to put on another sim card which is not from orange, it gave me the following message:
"You have tried 5 times, please wait until timeout..."
_____________ (should enter code here)
|OK| |Emergency|
i also tried to put the unlock code: "If the phone requests unlock code when you put a locked SIM, the code is: 22051978."
and it said that is an invaild code. can anyone help?
thanks
Please confirm that you have flashed the patched Radio ROM correctly.
You can do this by clicking Settings---->System----->Device Information.
Radio version should read 1.16.00
If not then retry the flash again.
Regards
S.K.
hi, silent...thanks for the advise.
i did servral time rom flash again however, after i reset the device after the error message. the rom version still 1.06, the same.
what do i do about it? i am sure i followed the instruction...just don't know where i did wrong...thanks
here some more information about my device:
Rom Version: 1.23.61.4
Rom Date: 07/13/06
Radio Version: 1.06.00.00
Ok
The unlocker is not working because the radio is not flashing correctly.
Firstly lets just make sure that you are running the correct bootloader and Orange Uk haven't updated their devices with a new ROM.
Put your device into bootloader mode, do this by pressing power+ok button together and then soft reset (while buttons are still pressed).
EDIT: Ensure its Ok button on side of device, not ok button next to d-pad
Should now see a screen with coloured blocks and some information on screen.
Post here what it says after SPL
Regards
S.K.
thanks for the advise again.
i did confirm the bootloader before i do the flash, but i checked it again. here is the info.
HERM100
IPL - 1.01
HERM100
SPL-1.04
THANKS
hi..i tried few times again but it still won't flash the Radio. By the way, i am using the Windows installed by Parallels on MacBook. Would that be the problems? cause the bootloader is 1.04 but it just doesn't work. i really don't know why..also, the RUU is not getting the information from my devis either.
here is some pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Search the forum for enter simlock code thru MTTY.EXE.
Are you flashing with phone booted in OS or are you flashing from Bootloader??
hi..i was doing the flash from Bootloader.
after some research i known some people have the problems too...also i tried the command method from POF but can not get the "0" message...
sologuy said:
hi..i tried few times again but it still won't flash the Radio. By the way, i am using the Windows installed by Parallels on MacBook. Would that be the problems?
Click to expand...
Click to collapse
Definitely! Try either booting into windows directly or using an actual PC for the radio reflash.
Richard
hi..thank you for all your guys help..finally i got my m3100 cracked on a formal PC. definitely is the macbook problem. thanks again for the help.
sologuy said:
hi..thank you for all your guys help..finally i got my m3100 cracked on a formal PC. definitely is the macbook problem. thanks again for the help.
Click to expand...
Click to collapse
Good deal! I think the Boot Camp thingie or whatever Apple calls booting full real Windoze should work, but using a PC is safer Glad you're unlocked!
Richard
Related
hello im newbie here...anybody can help me in my X01HT..i follow this but still simlock??:
1. Transfer SSPL/SSPL-HERM.exe to your phone and run it
2. Tri color screen will appear
3. Disable activesync (file -> connection settings -> uncheck "allow USB connections")
4. Connect your phone to your computer using the USB lead.
5. run RUU/RUU_HERM_Unlock_v3a.exe
6. follow the flashing process (Check the "I understand..." and "I completed..." boxes and update!)
7. Allow your phone to reboot.
8. Transfer HERM_Unlock_v3.exe program to your phone and run it
9. Click the Unlock Button, select unlock option. Select if you want SIM/CID unlock.
10. Click "Unlock!" and wait until process finishes.
11. When done, turn off your phone for 10 seconds and reboot after that.
but the result of tryig it 100 times is this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can't unlock the X01HT with the tools from xda developpers
so what i should i do next??any one can help me to remove simlock?tia
i got the same problem with my x01ht any solution pls.
i got this msg: you have tried 100 times please wait until time out....
i cant enter a code even....its blocked...any idea?
any body can give an idea where to see its manufacturing date?its not indicated at the back label?
I have the same problem.
Very yesterday, I have succesfully unlocked SoftBank X01HT.
But last night, I have tried to unlock 3 pieces of SoftBank X01HT, until now there is no one have to be success. Of course, I've tried Hermes Unlocker, but still lonely until now.
Keep trying.
adityakw said:
I have the same problem.
Very yesterday, I have succesfully unlocked SoftBank X01HT.
But last night, I have tried to unlock 3 pieces of SoftBank X01HT, until now there is no one have to be success. Of course, I've tried Hermes Unlocker, but still lonely until now.
Keep trying.
Click to expand...
Click to collapse
And you have tried this?
^
Sorry, what's your mean?
Hmm, I don't understand, sorry for poor in English.
I have tried my best, ane I have unlocked 1 piece a month ago. But now, my friend brings 3 pieces of X01HT, but I can't unlock it until now.
Perhaps next minute will be so positive to me...
adityakw said:
^
Sorry, what's your mean?
Hmm, I don't understand, sorry for poor in English.
I have tried my best, ane I have unlocked 1 piece a month ago. But now, my friend brings 3 pieces of X01HT, but I can't unlock it until now.
Perhaps next minute will be so positive to me...
Click to expand...
Click to collapse
It's my Softbank night...
To see the phone version : remove your battery, look a the date on the sticker (me : august 07). If your phone is after April 07, you cannot unlock it if you let the update run the first time you turned the phone on. If your phone is after august 07, like me, I think the update is already installed at the factory : you're ****ed.
But you still can unlock with imei-check, and yes it costs money.
I supposed the phone you unlocked was before April 07, and the 3 phone of your friend are post april 07, and it already turned it on. Sorry for you...
Good luck with that, and above all, **** Softbank.
Toni
sim unlock works
you need only to update to a official htc rom and the code for simlock is "12345678" than your phone is unlocked
verry easy
you can find the official htc rom at http://forum.xda-developers.com/showthread.php?t=320829&highlight=dutch+rom
greez tom
tom1687 said:
you need only to update to a official htc rom and the code for simlock is "12345678" than your phone is unlocked
verry easy
you can find the official htc rom at http://forum.xda-developers.com/showthread.php?t=320829&highlight=dutch+rom
greez tom
Click to expand...
Click to collapse
are you sure????????????????????????????? If so, this is the greatest news I have read in this forum so far.
yes i'm sure i have don it and it wordk i have found this here with xda forum?
you welcom greez tom
tom1687 said:
you need only to update to a official htc rom and the code for simlock is "12345678" than your phone is unlocked
verry easy
you can find the official htc rom at http://forum.xda-developers.com/showthread.php?t=320829&highlight=dutch+rom
greez tom
Click to expand...
Click to collapse
No, this doesn't work. I've tried every combination of ROM / flashing / unlock procedure, even those thin hacker SIM inserts with a little bypass chip on them. None of them will unlock a SoftBank X01HT.
myqmyqmyq said:
No, this doesn't work. I've tried every combination of ROM / flashing / unlock procedure, even those thin hacker SIM inserts with a little bypass chip on them. None of them will unlock a SoftBank X01HT.
Click to expand...
Click to collapse
if you already have SoftBank 1.33.761.4 ExtROM before you do a SIM unlock your device..??
here use it
Hi there!
Well, despite the huge warnings in red colors, I installed the official RUU 2.1 update. My HTC Hero is now with 2.1 and works fine, but I would like to install a Spanish language pack (MoreLocale doesn't works). Yes, I know I could wait to the WWE version but... The mistake is done. So, my questions are:
1.- Could I rollback my firmware or try to install a custom rom? How? (I tried Goldcard + Previous version without success)
2.- Could I install a spanish locale?
Thanks in advance and congratulations for the great job you're doing today. How many roms in less than 24h!
This is a so-called 'WE TOLD YOU SO' situation..
But, have you tried an old RUU package?
Yes, and I can't install the previous one. I also noticed that my bootloader version is newer (000004 before, 000007 now).
It's suposed to be possible? (install the prev. Version, I mean)
Maybe with the goldcard method, but not guaranteed it will work.
Ok, I'll try later again, but I'm not sure if this is gonna work, because I tried it twice a while ago.
Thanks!
Good luck
Tried twice with the GoldCard method (I did it well, because it worked when I updated) and I get this error:
Checking Main Version
Update fail!
And in the RUU installer:
Error [140] Error bootloader version (or something like that)
Suggestions?
Wait for someone who is able to root the new rom...sorry...
Uniyah said:
Tried twice with the GoldCard method (I did it well, because it worked when I updated) and I get this error:
Checking Main Version
Update fail!
And in the RUU installer:
Error [140] Error bootloader version (or something like that)
Suggestions?
Click to expand...
Click to collapse
hi, i'm just a noob like you, i had to do the goldcard method, it didn't work the first time, but to make sure i was following the tutorial, i had to print it, and follow again, and then it worked, make sure you pick up the right one for your phone. and start from the beginning again , i'm sure you'll get it to work at the end, don't give up. just go through what you doing step by step, you'll find what was wrong.
Ok, I'm trying right now. Will post results.
Thanks!
hi, i've loaded my first custom rom,the new villainRom 10, wow the phone is very quick, plus pinching the main screen the new feature, great.
first i didn't know which rom to use, had to go with what btdag got. all the credit goes to him on a great tutorial plus villainRom great rom.
downloaded the new radio, haven't installed it yet. got to do more reading first before i do, to be on the safe side. goodluck uniyah hope you got it sorted.
cheers to all the devs and tutors
Well, I tried the GoldCard method for 15 times. It just doesn't works. I think it checks the version and give me this error.
One question: Is possible to install the Spanish locale?
For now it's just impossible to root the new 2.1 because nobody has done it yet so for now you will have to wait... However, the Sprint Hero had been rooted a few days ago so I think that it won't take ages to root our Hero...
Try MoreLocal in the market for installing Spanish...
MoreLocale doesn't works.
So, there is nothing I can do for downgrade? Any other Goldcard methods or something like that?
I don't think so... In my opinion some guy will find a way to root the new rom but you will have to wait...
As you have seen Gold card doesn't work...So the protection against root has changed...
New HBOOT probably denies installation of lower version than it already is on the phone, thats why you can't run any of the previous RUUs. Tough luck
Rooted 2.1 official rom's are out now try vilain 10 but be careful when flashing the radio because i just bricked mine flshing it :'(
Brrr, and I can't get into recovery mode. I get this when I try to put the phone in recovery mode (Power + Home button)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And, of course, I'm unable to load anything using fastboot or hboot. The version that shows me the bootloader is HBOOT-1.76.0007 (HERO10000)
What happens when you press home, or back?
ddotpatel said:
What happens when you press home, or back?
Click to expand...
Click to collapse
I tried twice and nothing happens :S
Anyone, any ideas?
Quite some time ago, when HD2 was brand new, there were some people around with unofficial beta-ROMs on their devices. Don´t exactly know what was going on, but I am quite sure the search function will bring this or that into light for you.
Maybe flashing with a Goldcard might help, not sure. But apparently, your SPL seems to face troubles, no wonder you´ve got freezes etc.
Did you try to flash something older than the 3.14 stock ROM? A lot of users are not happy with this anyway...
Also, older SIM cards or some SD cards can cause issues, did you try to flash without those in the device?
I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.
Bruno Kreisky said:
I flashed all three ROMs which are available to download at HTC Website via RUU and direct from SD-Card. I also tried to install all SPL which are available from Bepe and Cotulla. I got the Security Unlocked line away on top but the freezing problems are ongoing as before.
Actual I have two HD2s, both are from same Provider with same SIM-lock but with different SIM-Unlocks. I did a photo of Boot Screen and this shows the difference. I have actual on both last Stock ROM.
Here is the picture from working HD2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here is picture from non-working HD2
As you can see, the difference is in first line "PB 81100" and "PB 81***" I think I have to improve here but not glue how to???
Update:
And now it becomes really strange. I already flashed the strange phone with Stock ROM from SD-Card so you can see above. After that I did a flash with latest ARTEMIS ROM and SSPL_RUU and the following Boot Screen appears
So before flashing there was SPL 3 on phone, while flashing there was SPL1.42.6666 on phone and after flashing there is SPL 3 again on phone???
Click to expand...
Click to collapse
Sir, SSPL works only for 1 (one) cycle. After you reboot the phone, your SPL will return to the original one (the one before SSPL).
SPL 1.42.6666 is only a temporary SPL modifying your actual/original SPL.
Cheers
Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?
Bruno Kreisky said:
Good, good, good ... but the question is --> How do I come from PB81*** to PB81100?
Click to expand...
Click to collapse
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers
silverwind said:
I forget the link, but I read somewhere in this forum, that PBxxxx represents the region of the phone. I think you flash unsuitable rom. In other words, the rom is not for your phone.
Cheers
Click to expand...
Click to collapse
As I wrote above (maybe bad english), I flashed both mobiles with latest Stock-Rom (downloaded from htc.com/de) via, SD-card. Both mobiles were sold from same Mobile provider in austria with same SIM-lock. But, they were un-SIM-locked differently. Now, one is working smoothly (the one with PB81100) and one freezes almost (the one with PB81***) and GPS is working really, really badly in comparison to the other one.
EDIT: GPS is completly NOT working on device with PB81*** on Boot-Screen :-(
Push this thread!
hi,
i have also an htc hd2 from "3" in austria.
i flasht it to hspl 2.08 without any problems.
but! since i let it unlock it in a mobile-store here in vienna.
the model ID- is now "PB81xxxx".
and now: it is not possible to flash it back.
here are the pics:
pocketpc.ch/htc-hd2-rom-upgrade/126754-sim-sntsperren-kein-flashen-mehr-moeglich.html#post990530
it seams the cnaged the model _ID during unlocking.
Hello and sorry for my english.
I have a Mozart phone but the phone is blocked on bootloader with only one line that say "PD67100 SS-BC (4k)"
no "serial" or "usb" write...
No hard resert possible.
How to resolve this problem ?
Thank
WAIT ....
same problem .. but no solution for now ... we have to wait
boot loader blocked
same here no usb no serial
That is interesting to see...What countries, networks, branded or otherwise did you get the phone with?
My phone is on Orange France.
I just look at mine - it is the same loader,
From my experience the Boot loader screen should always display Serial, even when not connected to a computer. In my 7 years of supporting HTCs - I have never seen the issue you describe.
I've got the same problem.
If anyone will find solution of that problem please write it here.
Same prob here on HTC unbranded version. Hard Reset and Checksum possible, but no usb-connection in bootloader.
I am also having the same problem. = / No connects bootloader mode.
same problem:
just without vender id. instead pd67100 there are differend characters.
I think this happens coz of RSPL/HSPL hack
I don't really like flashing these roms as they may result in destroying your phone.
I just like ROMs coming from ansar.
I hope you all find a solution.
As long as your are careful and follow the guides and read everything then there should be no issues with flashing ROMS to devices "ansar" ones or otherwise.
Hi all ,i have the same problem ,on my screen i read only
PD67100 SS-BC (4K) ,nobodys know a solution at this problem?
"PD67100 SS-BC (4K)"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
means your device now in half brick condition, and not yet solution till now (but it with jtag it may possible i think)
for this question or similar with that, please refer to this thread and make sure you read carefully missing step or instruction can make our mozart going brick or maybe half brick
Cotulla said:
Issues with MANGO RUU ROMS.
List of such ROMs:
It's not full list. Maybe some other ROMs affected by this too.
Thread about this ROMs.
RUU_Gold_S_HTC_Europe_3.02.401.01_Radio_5.69.09.29 a_22.50.50.21_Signed_GOLD_RELEASE.exe
RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe
RUU_Mozart_S_HTC_RUS_4.06.411.00_5.69.09_RELEASE.e xe
RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.0 9.29a_22.50.50.21_Signed_SCHUBERT_RELEASE.exe
RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE .exe
About issue:
After running RSPL on MANGO OSPL, you can't flash device via SPL.
Windows Phone 7 OS is still booting and working.
Instead of full SPL screen you will see only one the first line:
You device will be "HALF BRICKED", because you can use OS, but can't flash anything else.
At the current moment it's IMPOSSIBLE to recover such devices. And I am not sure it will be ever possible.
What you must NOT do:
Before running RSPL wizard check your SPL screen.
There current SPL version at top: "X.Y.Z 2250 "
When wizard asks you to choose your current SPL version, be sure it's present inside versions list.
If your current SPL version doesn't present in the list, you can choose nearest version, BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
Generally it means that you must NOT run RSPL wizard after MANGO RUU ROM installation. You must flash older version (with 7004 or NoDo) and then run RSPL.
Installed OS version doesn't important. Only SPL version important.
Click to expand...
Click to collapse
Does anyone know if this problem can be solved using the GoldCard?
Hello ,any news about this problem?
Nicolas Alves said:
Does anyone know if this problem can be solved using the GoldCard?
Click to expand...
Click to collapse
I've been told that Goldcard will not help to replace the SPL with an older version so won't get you out of the situation that stops you flashing ROMs of your choice. However, I would expect it to still be possible to use Goldcard to change a ROM.
f
The only way to unlock the boot via jtag repair. Tested and works on Mozart,
Fixed!!
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version
thecraziest77 said:
I got an update message from Zune this morning and after "htc update for Windows", the boot screen comes up again + 5. boot loader and 21.50001.77 firmware version
Click to expand...
Click to collapse
Nothing like that here - just says up-to-date. Which ROM did you use before?
help me...
my Hboot is 1.49.0012
i unlocked and relock because i want go to stock..but now, i want use cook rom, so i unlock again, and my phone say yes/no to unlock.. i select yes and my phone dont reboot, i wait 30 min but my phone dont active, i removed battery and reboot. it's stuck on HTC logo...help me...
up ruu it say error. up by sdcard it stuck here..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
help me...
now i just can boot to bootloader..
In order to release your phone from this state I recommend using adb and fastboot on your pc.
I too experienced this when I updated from 2.08.... to 2.17.... Following this I ran the Ruu from this post: http://forum.xda-developers.com/showthread.php?t=1239821
This was the original stock: I ran this from windows, rebooted, updated using OTA until I was fully stock 2.17
2.08.651.2 RUU http://www.multiupload.com/09NOXKCUN0 Thanks lchupacabras for mirroring!
And this site for current RUU
http://rootzwiki.com/topic/9282-sprint-htc-evo-3dshooter-shipped-roms/
These are .exe files that will reset your phone to stock state for OTA updates.
I'm on Hboot 1.50
Eddie2k1 said:
In order to release your phone from this state I recommend using adb and fastboot on your pc.
I too experienced this when I updated from 2.08.... to 2.17.... Following this I ran the Ruu from this post: http://forum.xda-developers.com/showthread.php?t=1239821
This was the original stock: I ran this from windows, rebooted, updated using OTA until I was fully stock 2.17
2.08.651.2 RUU http://www.multiupload.com/09NOXKCUN0 Thanks lchupacabras for mirroring!
And this site for current RUU
http://rootzwiki.com/topic/9282-sprint-htc-evo-3dshooter-shipped-roms/
These are .exe files that will reset your phone to stock state for OTA updates.
I'm on Hboot 1.50
Click to expand...
Click to collapse
thanks you... but my phone is Evo 3d GSM...and my problem is my phone stuck bootloader when i unlock again, first unlock with no problem, then i relock, and unlock again, so it stuck bootloader.
any ideal???
Download
gsm ruu evo3d.
Search on google.it is a program.its pretty big. Install in your computer, then put your phone on bootloader and it should say USB
run RUU program.
You will lose root but it should go back to stock.
i tried, but it isn't reboot to OS..help me..................
duytrum444 said:
i tried, but it isn't reboot to OS..help me..................
Click to expand...
Click to collapse
I would get an RUU file for your phones current stock version, extract all the img files and flash them individually one by one via Fastboot.
I think that it could work better.
megabiteg said:
I would get an RUU file for your phones current stock version, extract all the img files and flash them individually one by one via Fastboot.
I think that it could work better.
Click to expand...
Click to collapse
thanks you very much... i will try it...but, maybe it stuck when update bootloader...
P/S: CID of my phone is HTC__622. i use RUU 1.22.708.5 for Hongkong user
duytrum444 said:
thanks you very much... i will try it...but, maybe it stuck when update bootloader...
P/S: CID of my phone is HTC__622. i use RUU 1.22.708.5 for Hongkong user
Click to expand...
Click to collapse
I Replied to your PM, let me know if that works.
I didn't look at the picture well, but one thing I do suggest and that can be cause of some issues over the process is that you need to unlock the bootloader from your phone again.