i WAS TRYING TO GET MY 3125 TO WM6 AND THE SMARTPGONE JUST STAIED AT THE SPLASH SCREEN
WHAT DO DO NOW ??????
start in bootloader mode and flash original rom back.
for bootloader mode look in xda-wiki
btw CAPITAL LETTERS means yelling, and no one likes yelling here
Related
cingular 8125 got stuck on ipl spl and numbers what can i do please anyone.
When you got the tri-colored screen, it's not bricked.
Do yourself a favour, please read before you act.
Download Original !! rom, and try to install it, don't pay attention to activesync (it won't work when in bootloader).
And please don't start multiple threads about the same subject.
sorry please forgive me, i solved my problem using love rom thank you for replying, i read so much info but not all is very much i might add.
My phone also is stuck
My phone is also stuck with the numbers at boot. How exactly did you fix it? It's not stuck in the tri-color screen but in the boot screen. It displays:
IPL 2.16.0001
SPL 2.16.0001
GSM 2.7.18
OS 2.26.10.2
just press and hold camera button then push reset button with stylus and voilá boot loader screen aka 3 stripes screen (red/blue/green) then just flash the love rom thats floating around here.
note. when connecting to pc in bootloader mode activesync doesn't seem to connect, but when you plug in the usb on the pc you will see the word usb on your phone on the down left corner meaning its connected and ready to flash.
hope all that is understandable, being spanish my mother language or however you spell that.
IS there WM6 that works with a G4??
Just use ShellTool on nb.nkf extract from a G3 RUU archive.
...or CID-unlock
i tried the shell tool
Ive tried shelltool but keeps freezing on splash screen when finished
what should i do?
IronMan19 said:
Ive tried shelltool but keeps freezing on splash screen when finished
what should i do?
Click to expand...
Click to collapse
Flash to wizard love or your carrier's rom. Then use shelltool, if you get stuck repeat the process. Sometimes it takes a couple of attempts.
umm how do you get the shelltool?
im new to this site so can u help me out?
bigeufemio said:
umm how do you get the shelltool?
im new to this site so can u help me out?
Click to expand...
Click to collapse
If your new I plead with you to read the wiki and the sticky's in the wizard forums. Then you can come back here and ask whatever you like. Most people on here are very friendly and helpful but all we ask is that others read a bit before asking. This reduces the amount of redundant questions.
There is an entire thread dedicated to the use of shelltool.
Good Luck
I could never get any rom to flash on my locked G4. Tried Shelltools with about 4 different roms w/o success. Finally broak down and paid the $42 US to imei-check.co.uk for their unlocking service.
Now I'm unlocked and back to flashing until my hearts content - Running NBD 8.3 w/radio 2.69.11 on my Cingular/ATT 8125.
Avoid the grey hair and if ShellTools doesn't work after the second time, pay for the service.
Stuck on a splash screen,
I also had a same problem after flashing by Shelltool and stuck on a splash screen.
Flash back to custom setting using RUU tool and Wizard Love rom.
(wizard love rom is for G4 cid locked wizards. It doesnt have IPL/SPL section)
Again I have flashed Most beautiful ver; using shelltool and now i am enjoying new WM6 on my G4 locked wizard.
***************
My Experience
***************
After you stuck on splash screen, Your device wont detect by activesync to use with RUU (rom upgrade utility) tool. But still you can go to Bootloader mode (rainbow screen) by holding camera button while you soft reset the phone. Run the RUU tool after you manualy set the bootloder mode. RUU tool will detect your device on USB with bootloader mode (your PC not giving any sign of usb connectin but RUU detect your devise)
Othewise RUU toll give you 'error message 260'
This method was worked for me.
ok I've been reading a lot & had some problems with certain roms but I need to ask a very stupid question:
how do I turn off the radio? does this means having the phone in flight mode?
thanks
exactly. Flight mode is radio turned off. I was surprised too, when i saw radio off, but logical thinking give me an answer. like u
CID-Unlock .... how ????
Excuse me, but where is the "Running NBD 8.3 w/radio 2.69.11 on my Cingular/ATT 8125." ROM ??? .... I've been surfing the forum but couldn't find anything !!!
Thank U
let me get this right once you cid unlock the phone you can flash the g4 without the shell program?
yes that right! once you unlock you dont ned shell toll you can flash to any ROM!
also if you wanna use shell tool flash to trisyndicate and then to the rom you want to flash (both use shelltool) it werked ofr me
nostromo76 said:
Excuse me, but where is the "Running NBD 8.3 w/radio 2.69.11 on my Cingular/ATT 8125." ROM ??? .... I've been surfing the forum but couldn't find anything !!!
Thank U
Click to expand...
Click to collapse
Those are two separate updates/flashes I performed after CID unlocking my 8125.
There is a thread in the WM6 forum containing NBD 8.3 and just do a search for the 2.69.11 radio. Just be sure to also search for the Cingular CAB fix for the 2.69.11 radio.
If you get stuck, just send me a PM.
Before upgrading WM6 WWE to WM6 Rus and my stupid manipulation with AthenaUnlocker my device don't turned on... Only black screen...
Please, help me...
realex said:
Before upgrading WM6 WWE to WM6 Rus and my stupid manipulation with AthenaUnlocker my device don't turned on... Only black screen...
Please, help me...
Click to expand...
Click to collapse
Please read the Unlocker thread through.
http://forum.xda-developers.com/showthread.php?t=315831
It's long, I admit, but if you did you would not be posting this now! However, knowing how anxious you must be by now, follow the steps below (which have been posted before in the unlocker thread).
Get one of the ROMs in this link and extract it
http://forum.xda-developers.com/showthread.php?t=314672
Get your device into bootloader (the three-colour screen; BTW it is Camera+Volume+Reset)
Connect it to PC (the SERIAL on the screen will change to USB)
Hit the ROM Upgrade Utility and upgrade your device.
When you finish, configure your device.
Then continue with the Unlocker, to the end.
(Always check first what you might need to do in case it goes wrong).
Good Luck!
Something tells me we might be seeing a lot more posts like these
I hope I'm wrong! (Shakes his head, sadly)
realex said:
Before upgrading WM6 WWE to WM6 Rus and my stupid manipulation with AthenaUnlocker my device don't turned on... Only black screen...
Please, help me...
Click to expand...
Click to collapse
I had the same problem
you have to put the 7500 in Bootloader mode ( Reset+Camera button).
And then Flash a Rom
i posted this in the other forum as it mite be more busy there http://forum.xda-developers.com/showthread.php?p=1703450#post1703450
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes. i have IPL 1.01 and SPL 1.04. it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
can someone help please.......??
Have you tried just flashing a Radio Rom Only?
Hi everyone.
im a beginner for PDA's..i have read your post about prophet then i decided to upgrade to WM6 PDAVIET.
While i connect pda and execute software i had mistake and turn off phone.i did turn on phone after cancelled process
it just showing operator logo and IPL SPL GSM OS infos..
and i have run again Upgrade_ROM.exe than its stopping " Clearing the existing Extension ROM " ..
What did i do PLS i wait your helps
goto bootloader and flash again
follow the direction on the link to enter bootloader mode
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
and read the NEW WM6 upgrade guide. which is a sticky on top of the page.
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
algorytma said:
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
Click to expand...
Click to collapse
read my post @ my signature...... please reply to that thread if you think helpful~~~
algorytma said:
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
Click to expand...
Click to collapse
That is not bootloader... It should show a three coloured screen, and when plugged in to USB, the text in the bottom right hand corner should say "USB"