Related
Hello together,
I got a T-Mobile MDA Vario II upgraded to Windows Mobile 6 and like to use thisone with a Vodafone SIM.
Here some Data about:
(Info from the Bootloader)
HERM300
IPL-1.04
HERM300
SPL-2.03
Systeminformation:
ROM-Version: 3.60.111.4
Radio-Version: 1.50.00.00
I've tried to Downgrade to WM5. I've tried button_rom.
I've tried everything, i have found about Down / Upgrade, about Sim-Unlock etc. etc. etc. ....
But i'm to Stupid to Sim-Unlock this MDA.
Always when I try to Downgrade to WM5, the Setup starts normally.
After the MDA enters the Bootloader the Setup will show an error like "no device....".
What did I wrong?
Please help me :-|
Thank You All!
PS: Sorry for my bad english..i hope, you understand me
tbler said:
Hello together,
I got a T-Mobile MDA Vario II upgraded to Windows Mobile 6 and like to use thisone with a Vodafone SIM.
Here some Data about:
(Info from the Bootloader)
HERM300
IPL-1.04
HERM300
SPL-2.03
Systeminformation:
ROM-Version: 3.60.111.4
Radio-Version: 1.50.00.00
I've tried to Downgrade to WM5. I've tried button_rom.
I've tried everything, i have found about Down / Upgrade, about Sim-Unlock etc. etc. etc. ....
But i'm to Stupid to Sim-Unlock this MDA.
Always when I try to Downgrade to WM5, the Setup starts normally.
After the MDA enters the Bootloader the Setup will show an error like "no device....".
What did I wrong?
Please help me :-|
Thank You All!
PS: Sorry for my bad english..i hope, you understand me
Click to expand...
Click to collapse
I think the RomUpgradeUt.exe that exists in the wm5 ROMs is not compatible with SPL 2.03.
try this:
Extract the .nbh file from your desired wm5 rom (Rename your ROM from *.exe to *.zip and extract it using winzip).
Flash it to your device using RUUwrapper.exe (Force using SSPL).
:,-(
Hey together again,
now i've made the update.
It shows no error or something other.
The MDA looks like a WM5 device - But it will stop booting when it shows the first WM5-Picture.
Ok...now it will stop when it shows the "T-Mobile" Splash Screen..
Well....one Softreset later .... i have a white Screen
This i have already done:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
The SPL is 2.03 again.....
Now I can't go on with the RUUWrapper ......
Is there any posibility to Update the MDA while staying in the Bootloader (works without problems).
Thank You Again
Greetings from Germany
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Hello Again,
i've tried to perform the update this way.....but it won't work :-(
I insert the SD-Card, load the Bootloader, after this, the Display show's:
"Loading...."
After this:
"Checking..."
And for a Short time
"00028002
Not Allowed"
Then I'm in the RGB-Colored Bootloader......
Any Idea? I've tried the WM6-File from the T-Mobile Page, the WM5-File....
No of them will work.
Thanks again!!!!
Have a look through this...
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
might be of use, havent had a change to read it fully so it might not be any help.
tbler said:
Hello Again,
i've tried to perform the update this way.....but it won't work :-(
I insert the SD-Card, load the Bootloader, after this, the Display show's:
"Loading...."
After this:
"Checking..."
And for a Short time
"00028002
Not Allowed"
Then I'm in the RGB-Colored Bootloader......
Any Idea? I've tried the WM6-File from the T-Mobile Page, the WM5-File....
No of them will work.
Thanks again!!!!
Click to expand...
Click to collapse
I don't understand your situation exactly??
Do u have wm6 on your device now?
Can ur device boot into os or not?
Do u have NO GSM error?
Hello,
i've read the manual.
But it won't help me.
The Autor wrote this:
"Connect the device up to activesync using the USB cable, then run RUUWrapper.exe"
My Problem: Windows Mobile 5 or 6 doesn't Boot - So i can't use the RUUWrapper....
To enter the "special" BootLoader I need an working WM5 or WM6....
Do you know, what I mean? My english isn't the best.. sorry :-/
@koorosh_bsboys
- I DON'T have the "NO GSM" Error.
- My OS does not Work.
- The device looks like it's a Windows Mobile 5 (i can't see more, because it doesn't boot | It will stay at the blue Screen ("Windows Mobile" and the Windows Logo)).
- Update per SD-Card brings the following Situation:
I insert the SD-Card, load the Bootloader, after this, the Display show's:
"Loading...."
After this:
"Checking..."
And for a Short time
"00028002
Not Allowed"
Then I'm in the RGB-Colored Bootloader......
please exactly tell us your problem
1.IPL version?
2.SPL version?
3.Can boot into OS?
3.KITL enabled or not? (hold Power+comm manager+left ok buttons and reset with stylus, keep touching them until you see the KITL dialogue - if enabled-)?
4.NO GSM error?(when restarting ur device look out to bottom of the screen, do you see NO GSM)
koorosh_bsboys said:
please exactly tell us your problem
1.IPL version?
Click to expand...
Click to collapse
=> IPL-1.01
koorosh_bsboys said:
2.SPL version?
Click to expand...
Click to collapse
=> SPL-2.03
koorosh_bsboys said:
3.Can boot into OS?
Click to expand...
Click to collapse
=> NO (So i can't run the SSPL)
koorosh_bsboys said:
3.KITL enabled or not? (hold Power+comm manager+left ok buttons and reset with stylus, keep touching them until you see the KITL dialogue - if enabled-)?
Click to expand...
Click to collapse
=> I hold the Buttons for about 1 minute....but i will stay in the 3-Colored-Bootloader - So I think - Not Enabled
koorosh_bsboys said:
4.NO GSM error?(when restarting ur device look out to bottom of the screen, do you see NO GSM)
Click to expand...
Click to collapse
=> Yes, now i've seen the "NO GSM" Error....(http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5 <= Method 2 I've tried...but won't help!)
I know....i made something wrong..but i don't know what :-(
Sorry to tell you that dude!
But welcome to the club of bricked hermeses with spl 2.03.
Until now there is no known sulotion to fix that, unless you want to send ur device to service center!
OK...that's very ****, but i can't change this.. *damn* :-(
I have one more MDA Vario II with WM6, SPL2.03 and IPL 1.01
=> WORKING....
But i think i'll unlock this one by the "T-Mobile-Sim-Unlock-Code".
I won't risk the second mda ;-)
THANK YOU VERY MUCH!
Why Flashing...?
Go to any vodafone store..make your device back to WM6..
say to the guy @ vodafone store that your going on a holiday.. they will give you a key that unlocks the device..
and your done ! ! ! Works for a friend of mine
ElProempie said:
Why Flashing...?
Go to any vodafone store..make your device back to WM6..
say to the guy @ vodafone store that your going on a holiday.. they will give you a key that unlocks the device..
and your done ! ! ! Works for a friend of mine
Click to expand...
Click to collapse
I don't think, that a vodafone store will give me a unlock-code for a t-mobile device.... :O
And the next Problem is, that de MDA doesn't boot the OS and have the "no gsm" error....
hello,
i have a qtek s200, spl 2.20.0001.
i've been trying to hardspl/upgrading to wm6 for a couple of days now.
have tried every possible way i could find on this forum (and others).
tried the kaiser v1, jumpspl, update package, prophet tools, ...
nothing works for me.
i always get the white screen the second i press continue on my device or when i click ok on my pc.
i can hear the device rebooting, because my usb connection gets reactived when i wait, watching the white screen.
after a while i even get my activesync connection back. but always in white screen. when i softreset the s200 i still have the spl 2.20.0001.
i even tried upgrading it to another rom in the white screen and then i get stuck in the bootloader, which means i have to re-install an official qtek-rom.
help me!!! what should i do to be able to use wm6 on my device??
thanks a lot in advance. appreciate it it! a lot!
greetz
never mind ...
followed the instructions on the G4forum and it works (for) now.
sorry. thx for those who read my question anyway.
greetz
i saw lot of people have dead prophet problem, so i am here now to make a new thread to all this people and i hope to make it useful.
now we start
** FIRST : lets know names of prophet :
I mate Jamin, O2 XDA Neo, Qtek S200, Dopod 818 pro, Dopod 830, SPV M600, VPA Compact S.
** SECOND : we must know that before we trying to do any updating or change roms on my prophet i just need to do which called unlock for the prophet and then we after that been able to change any rom on my ( jamin ) and of course u need to be careful about Your device is it G4 or G3 ,
# and how we know its G4 Or G3 ?
# when u start Your Device u will see some numbers on left,
---------------------
IPL: 1.00.000
SPL: 2.20.000
GSM: 02.61.21
OS: 3.0.0.0
--------------------
and may be changed and that goes to the rom which You have, now we look for the last number on ( IPL and SPL ) , if we found it ( 0 ) it means You r G3 and if it ( 1 ) so You r G4 .
** THIRD : lets go to unlock , i will put programs in this thread it will help u in unlock.
-- Sync your device with computer and open the file u download it called HardSpl you will find two files one one foe G3 and G4 open your kind then you'll find a file called (( hardspl.bat )) okay, be sure your device is connected to computer then open the file and follow instruction and it will reset your device ,
now u ready to change rom.
TO BE CONTINUED
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
if any one can help please contact me.
hello
my device is jamin g4
it stopsat the boot loader and dono thing
can u help me please?
my e-mail is [email protected]
and suddenly after trying to update the spl been 1.01
please help me
can i fix it?
waiting for ur help
What is the IPL and SPL?
If the wiki where up, I'd suggest looking at that, but as it is I'll explain it now...
What ROM where you attempting to upgrade to?
To get the device back, I would say "Read the wiki" but it's down!!!
Download this ROM.
In ActiveSync, disable "connect through USB" (File->Connection Settings).
Put the device into bootloader (the three coloured screen) and connect it to the computer using the USB cable.
Run the file you downloaded earlier. This should then install a new ROM.
From there, just wait for it to finish.
Now, it should work!
From there, you could re install the Orange WM5 ROM, or try upgrading to WM6. Make sure you read all the relevant guides first!
thanks alot i did as u said but it stops at 80% or 88%
then show this message (error 326 invalid command )
please help me
i'm feeling bad
my mail is [email protected]
What brand the device? Has it been SIM unlocked?
hi again brothers, pal zerocool. first u must unlock ur device to be able to accept any rom after that and solve pproblems.
first flash this rom its offecial and it solve dead prophet problems.
then make hard spl by program open file called hardspl.bat.
make hard reset.
flash ur rom u want.
make hard reset again.
then enjoy.
i uploaded the hardspl program but i couldnt upload the rom its so big so u can look in ur mail u will find the solution.
u can extract file by any program for zip.and tell me the news
dont forget to look to ur mail. see all of u later
Dead prophet
Hi guys,
I have been using a sh... Nokia sine I broke my prophet G4 in december by upgrading the OS.
I had downgraded first to NVID and then I tried to upgrade and it fails at 95%.
Sine this day, my prophet seem totally dead, no light when plug on both charger or computer, windows do not recognize at all the device because it is turned off. And it really do not seem to charge...
I am living in China now and a guy told me I had to change the PB board...The ost is 100Euros, but I am almost sure I an find another solution...
The weird thing is I cannot charge it at all ( I mean no lights but does it charge a little?).
The guy tested my prophet with another battery and in that ase, it is stuck on the bootloader.
We tried several roms and it always fails at 95% and the error is 200 something, maybe 245 or 243, I do not remember sorry...
Is my phone hardware is dead? or it is just a software problem and I did not see the right guy?
Do I need to buy a new battery? I have read that sometimes the device is not able to recognize it even if it the offiial one and even if it is working on another device...
PLease help me I don't want to loose this phone that I've been using for almost 3 years...
Otherwise I will switch to an iphone but I am not sure to be as happy than I was with my prophet.
Xie Xie for your advice and answers.
Guilh1
Can it enter bootloader at all?
If yes, what are the IPL and SPL?
If not, it will be a hardware problem (may just be connectors to the battery but may be something more).
the only way of recovery is using jtag
but 1st we must discover the location of jtag pins on motherboard
I just do not know because with my actual battery, anything is possible....
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
I may be right about the battery onnectors though, but the problems seem to be from the phone connectors or the battery it self???
Thank you anyway for your very quick reply
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
Click to expand...
Click to collapse
If it can enter bootloader, it is almost certainly your battery at fault!
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/B] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
Click to expand...
Click to collapse
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/b] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Click to expand...
Click to collapse
Please look at this if you want more help, post here...
thanks alot dear samuraititio
but i can't flash it
it writes (no vender id)
help me please i tried another tool with the same nbf file it stops at 80%
and it automatically enter the boot loader
and i can't do ant thing
its information
jamin/g4
ipl 2.13.0001
spl 1.01
i think my problem is in the spl coz it was 2.13.0001
and now it's 1.01
how can i fix it please i still starter in this way so i'm trying;
help soon please
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
l3v5y said:
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
Please look at this if you want more help, post here...
Click to expand...
Click to collapse
hello pal i3v5y
i have the same problem
idid what u said the flashing stops at 80%
i need ur help please
i'm online at the moment and u too help me soon if u can please
my e-mail is [email protected]
waiting for u i don't have any other device to use and i need it
l3v5y said:
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
Click to expand...
Click to collapse
now i flashed the official rom of jamin but it stopped at 80%
Hello,
I will start with my story: I have a qtek S200 and i have make a mistake i think? a friend off my set that i cane use every rom for your phone. So i have putt this a Vincent rom on it. (that's the only thing i know)
Now i want a new rom but, every Rom for a Prophet that i tray on my S200 stops by the Red/Green/Blue screen.
Can some wane help me to get a working Rom for me or a fix for this problem.
Thanks
(And sorry for the bad English)
i think it is in this topic right? (http://forum.xda-developers.com/showthread.php?t=353547)
the problem. You haven't HARDSPL your Device.
Now, go to bootloader mode and flash PDAVIETTemp ,which can be found here.
PDAVIET TEMP
and HARDSPL your Device.
once you HARDSPL your device. SPL information should be 2.G4.4PDA for PPC G4 or 2.G3.4PDA for PPC G3.
Read WIKI. What is SPL. And how to go to bootloader mode.
Thanks
Hello varanusvincent,
So if i'm right my device was not ready jet for WM6? En after your Prophet_Temp i cane load every Rom 6 in it? I'm right?
Tanks
Edit: I have tray your Temp but i won't work. is there another way to hardSPL my device?
For the second time i have load te Rom in the image stay still at 74% cane i break the operation? And how do i get te boot screan back after a abord?
Smattie said:
Hello,
I will start with my story: I have a qtek S200 and i have make a mistake i think? a friend off my set that i cane use every rom for your phone. So i have putt this a Vincent rom on it. (that's the only thing i know)
Now i want a new rom but, every Rom for a Prophet that i tray on my S200 stops by the Red/Green/Blue screen.
Can some wane help me to get a working Rom for me or a fix for this problem.
Thanks
(And sorry for the bad English)
i think it is in this topic right? (http://forum.xda-developers.com/showthread.php?t=353547)
Click to expand...
Click to collapse
You may try
Just a question: I have still Red/Green/Blue?
My IPL 2.21.0001
SPL 2.20.0001
Still i cane not update?
Smattie said:
Just a question: I have still Red/Green/Blue?
My IPL 2.21.0001
SPL 2.20.0001
Still i cane not update?
Click to expand...
Click to collapse
1. yes, can still update,
2. FORCE BOOLOADER MANUALLY, (very important )
3. Flash NVID for Prophet
4. after restart and activesync,
5. use my Lazy_tool to flash any rom you like....
Enjoy....
Sorry, i'm busy for 8 hours with this ..... phone and it's very hard for me to dot it wright.
So how do i get in "FORCE BOOLOADER MANUALLY" and what do you mean by "Flash NVID for Prophet"
(i'm sorry for all the questions but if read all the Wiki's and guide's but it still not working)
I hope you cane explaine it to me
Smattie said:
Sorry, i'm busy for 8 hours with this ..... phone and it's very hard for me to dot it wright.
So how do i get in "FORCE BOOLOADER MANUALLY" and what do you mean by "Flash NVID for Prophet"
(i'm sorry for all the questions but if read all the Wiki's and guide's but it still not working)
I hope you cane explaine it to me
Click to expand...
Click to collapse
Have you read wiki for prophet?
Here are how to enter bootloadermode
PDA Viet Temp is just to make you back to WM5 no vendor.
To hardspl your device. Read here.
You can HARDSPL your device. Or use lazytool from youzi. Posted from dioxda2.
Lazytool is using softspl.
varanusvincent said:
Have you read wiki for prophet?
Here are how to enter bootloadermode
PDA Viet Temp is just to make you back to WM5 no vendor.
To hardspl your device. Read here.
You can HARDSPL your device. Or use lazytool from youzi. Posted from dioxda2.
Lazytool is using softspl.
Click to expand...
Click to collapse
Hey smattie,
from the wiki, there is a sentence missing after "To enter bootloader, you need to hold the comm manager button and soft reset."
that is " then release the stylus and keep pressing the comm. button until you see the bootloader screen"
Dear VaranusVincent,
Lazy_Tool is a modified version from Youzii's Chinese version, I had that named "LAZY" because I am ~~~~~~~
Hello varanusvincent and dioxda2,
Very tanks for the good explenations and tips. i want to tank you guys for that.
Just another question the SPL is now 2.G4.4PDA cane i run every rom now ore must i do it with a tool?
Smattie said:
Hello varanusvincent and dioxda2,
Very tanks for the good explenations and tips. i want to tank you guys for that.
Just another question the SPL is now 2.G4.4PDA cane i run every rom now ore must i do it with a tool?
Click to expand...
Click to collapse
Don't worry, both way can do.
1. Flash with the tool included in your favorite rom package.
2. or change the nk.nbf in the Lazy_Tool will do ,too.
enjoy~~~
imate jamin boot loader problem
please help me my imate jamin after upgrade shows red green and blue colour iam not able to enter boot loader by pressing com manager and reset button please help
josepgreg said:
please help me my imate jamin after upgrade shows red green and blue colour iam not able to enter boot loader by pressing com manager and reset button please help
Click to expand...
Click to collapse
READ WORD BY WORD~~~~~
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
HELP
Hai My Phone Shows 3 Colours And Ipl &spl Nos What Sould We Do
josepgreg said:
Hai My Phone Shows 3 Colours And Ipl &spl Nos What Sould We Do
Click to expand...
Click to collapse
He josep,
Have you this whole topic? You must load the bootloader your self. And what this have you trayed?
Hi to everyone,
I've read dozens of pages on how to do a HardSPL in Prophet G4, but i simply can't have success...
I've tried 4 or 5 methods that I found here, but none of them had been suceded...
I get a white screen, i get the 3 color screen, the connection fails...
I din't know what to do more... Can somebody help me, pleeeeeeeeaaaaaaaaaaaaseeeeeeeeeeeeeee....
I use Win XP Pro, and my Prophet gives me this info when I do Soft Reset:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.734
I was already able to change ROM once, because I had it in portuguese and now is in english, and with other logos.
But what I would like was to install WM6.1 or 6.5...
The HardSPL *.bat file gives me this information, now:
"One or more CON code pages invalid for givem keyboard code"
"cerun:failed to execute program"
Can somebody give me some idea?
Thank you so much in advance!
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
keenblade said:
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
Click to expand...
Click to collapse
Hi keenblade,
I was able to do that. My PPC went with the 3 color screen, and then I user a rom with No vendor. I disabled USB connection in ActiveSync, and then I could do that. I brought my PPC back.
My problem is just the HardSPL... I just can't do it... I've tried so many tomes and with so many files that I think i need some straight orientation, or i don't know what was wrong...
In this moment i have the PPC with WM5, but what i really would like to do is make a HardSPL to install WM6...
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
keenblade said:
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
Click to expand...
Click to collapse
Yes, i've used Prophet Tools already...
I guess i'm doing something wrong... I've tried again now, and went again with the 3 color screen. I'm injecting a NoVendor Rom again.
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right? There is a moment that nothing happensm but then ActiveSync recognizes again the PPC.
I'm i right? I must do that again. It must be somtging that i'm doing wrong...
pt_satelite said:
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right?
Click to expand...
Click to collapse
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
keenblade said:
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
Click to expand...
Click to collapse
I got it! I've followed this: http://forum.xda-developers.com/showthread.php?t=349900&page=9
And now I have a brand new WM 6.5 in my old Prophet!!!!!
Thank you very much!
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
keenblade said:
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
Click to expand...
Click to collapse
That's a good question... as i live in a non populated wifi area, i use just WPA, and it's fine. I must try WPA2, to check that.
and btw, 6.5 rom from babak00000 is just great. Love it.