hello,
i have a qtek s200, spl 2.20.0001.
i've been trying to hardspl/upgrading to wm6 for a couple of days now.
have tried every possible way i could find on this forum (and others).
tried the kaiser v1, jumpspl, update package, prophet tools, ...
nothing works for me.
i always get the white screen the second i press continue on my device or when i click ok on my pc.
i can hear the device rebooting, because my usb connection gets reactived when i wait, watching the white screen.
after a while i even get my activesync connection back. but always in white screen. when i softreset the s200 i still have the spl 2.20.0001.
i even tried upgrading it to another rom in the white screen and then i get stuck in the bootloader, which means i have to re-install an official qtek-rom.
help me!!! what should i do to be able to use wm6 on my device??
thanks a lot in advance. appreciate it it! a lot!
greetz
never mind ...
followed the instructions on the G4forum and it works (for) now.
sorry. thx for those who read my question anyway.
greetz
Related
hi all, hope someone can help, been reading threads for days and this is about my fifth xda so i'm no newb.
it's an i-mate jamin i got for my father, ipl/spl 2.13.0001 (G4) bought second hand from ebay, seems to work fine running wm5 os 2.13 but won't send text messages, didn't think much of it since i was planning to upgrade to wm6.1, unfortunately NO KNOWN METHOD WORKS.
Here's what i've tried:
Two different windows xp computers, two different cables, re-install activesync, hard reset, multiple connection retries.
PDAViet temp step 1 from OS and Bootload, most common error is [264], tried NVID wm5, tried official IPL 2.20.0001 upgrade and official i-mate ROM, tried jump/soft/hard SPL, all go to white bootload screen but no further, sometimes the green LED will flash as a radio signal on this white screen but usually nothing.
It seems very much to me like the bootloader is not responding, can someone please tell me when you put the phone in the bootloader and plug the usb cable in, after it has said USB, if you then unplug the cable should the USB text dissapear? because on mine it remains..
when running hardspl.bat the only error on the script is;
cerun: program could not execute (0), after trying to run jumpspl, altho it DOES go into the white screen and just sit there, yes i've tried pressing the camera button.
I'm fresh out of ideas here! help please!
when i run Prophet_G4_IPL_v2.20.0001.exe after a hard reset (sticks on bootloader and give [264]) but before that it says upgrade from 1.2.0.0 to 2.20.
That first number doesn't seem right? is it possible the previous owner flashed a G4 ipl onto a G3 device? and how would I tell?
Hi. I have searched the forums, but haven't found the answer I have been looking for, so sorry if this is a repeat.
I am working under Windows 7, installed VMWare and XP Pro on it, and easily installed Hard-SPL and Cracings 6.5. When I went to upgrade the Radio, I was sure to download one without SPL and IPL. I tried to upgrade, but it hung at 2% for at least 5 hours. (I knew it was bad in 2 minutes actually, but decided to wait). Now it will turn on, but to the tri-color boot screen. Tried hard reset (although I didn't really expect it to work). Is there anything that I can do? It shows when I connect it to usb, both on the phone and on the computer.
It is FAR out from under warranty, so thats out, but if there is anything I could try, I would be much obliged for pointers. Thanks a lot!
-Jotek
You need to make the update with RUU 2.5.2
( http://forum.xda-developers.com/showthread.php?t=314952 ).
Try it, if even that does not work (for me it works only with wizard_love ROM
( http://forum.xda-developers.com/show...293480&page=21 loca's post), but not with other cooked ROM's) then you can try WST wizard service tool
( http://forum.xda-developers.com/showthread.php?t=329170 ) to unpack the nbf and load only the OS ROM.
Thanks for the info.
I will try it later this weekend when i get time! (moving to new apt.... sigh... can't feed the addiction)
-jotek
If Tri Colour Screen WST needs to boot into WM OS surely???
How can you use WST if only on bootloader. Please explain as I have similar issues...
Dilbert
I had exactly the same experience as you: Hard-SPL followed by Cracing and then the tri-color screen. This thread helped me revive my G4.
http://forum.xda-developers.com/showthread.php?t=442126
Hey I am having the same problem but with my G3 att 8125. I flashed to 2.26 which I always do before installing any rom then installed X2A Haseebs Iphone Killer and it stalled at 57% for over an hour so I unplugged it and hard-reset it. I have installed this rom about twice and it works fine. Now my phone starts up and goes straight to the Tri-colored bootscreen. When I plug the phone in it displays that it is connected via USB but the computer doesnt recognize it. IPL 2.26, SPL 2.26 as displayed on the screen. PLEASE HELP!
Hi all, I've got the exact same problem as Quadzilla has - any help would be much appreciated!
Hi to everyone,
I've read dozens of pages on how to do a HardSPL in Prophet G4, but i simply can't have success...
I've tried 4 or 5 methods that I found here, but none of them had been suceded...
I get a white screen, i get the 3 color screen, the connection fails...
I din't know what to do more... Can somebody help me, pleeeeeeeeaaaaaaaaaaaaseeeeeeeeeeeeeee....
I use Win XP Pro, and my Prophet gives me this info when I do Soft Reset:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.734
I was already able to change ROM once, because I had it in portuguese and now is in english, and with other logos.
But what I would like was to install WM6.1 or 6.5...
The HardSPL *.bat file gives me this information, now:
"One or more CON code pages invalid for givem keyboard code"
"cerun:failed to execute program"
Can somebody give me some idea?
Thank you so much in advance!
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
keenblade said:
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
Click to expand...
Click to collapse
Hi keenblade,
I was able to do that. My PPC went with the 3 color screen, and then I user a rom with No vendor. I disabled USB connection in ActiveSync, and then I could do that. I brought my PPC back.
My problem is just the HardSPL... I just can't do it... I've tried so many tomes and with so many files that I think i need some straight orientation, or i don't know what was wrong...
In this moment i have the PPC with WM5, but what i really would like to do is make a HardSPL to install WM6...
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
keenblade said:
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
Click to expand...
Click to collapse
Yes, i've used Prophet Tools already...
I guess i'm doing something wrong... I've tried again now, and went again with the 3 color screen. I'm injecting a NoVendor Rom again.
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right? There is a moment that nothing happensm but then ActiveSync recognizes again the PPC.
I'm i right? I must do that again. It must be somtging that i'm doing wrong...
pt_satelite said:
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right?
Click to expand...
Click to collapse
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
keenblade said:
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
Click to expand...
Click to collapse
I got it! I've followed this: http://forum.xda-developers.com/showthread.php?t=349900&page=9
And now I have a brand new WM 6.5 in my old Prophet!!!!!
Thank you very much!
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
keenblade said:
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
Click to expand...
Click to collapse
That's a good question... as i live in a non populated wifi area, i use just WPA, and it's fine. I must try WPA2, to check that.
and btw, 6.5 rom from babak00000 is just great. Love it.
I want to help someone on this please , bcs HTC SPV M3100 when i'm trying to switch on phone was stuck on HTC logo and nothing more , i have try to put on boatloader mode and phone was going on bootloader mode three color screen and show this:
HERM100
IPL-1.04
HERM100
SPL-2.03
i'm trying with hard spl from Pof soft but error getting.
Can someone find a time to help me?
hallooo
experts please!
Hello haveri,
what ROM are you trying to start? I was stuck on HTC logo too, when I tried to start a ROM without installing Striped ROM first, which was highly needed. So I done hard reset(three color screen), and flashed again.
For starters, put in bootloader, connect to PC (1st untick "Allow USB Connections" in activesync) and run Hard SPL V7. Install it on your Herms and hope it works because otherwise you are in for a whole heap of hairpulling frustration...
If you get Hard SPL onto your Hermes then use the sd card method to flash a new rom...
You could have avoided this by doing a little research instead of going full pelt into flashing, you Hard SPL BEFORE you get into trouble, NOT AFTER....
Hi guys,
I have a similar problem with a T-Mobile branded TyTn from a friend of mine who thought flashing ROMs without putting device into HardSPL would be clever.
The devices has also IPL-1.04 and SPL-2.03 and from the bootscreen it looks like WM5 should have been installed. I also get the "NO GSM" message and I REALLY tried every fking method but without success.
I even created a Goldcard (and verified on another device it's working, level 0 instead FF) and tried to flash several ROMs (also Cingular WM5 ROM and original german T-Mobile ROM) but no luck.
I also tried to run HardSPL V7 but as far as I remember it just said it cannot connect.
Funny thing: HardSPL V9 DOES start flashing and on the PDA and the PC the bar shows 100% but some moments later it says "Could not update" (or something like that).
I even tried different mtty methods from several posts from the forum (erasing the NAND on different ways, qtek loader method with erasing the first blocks) but I'm really really frustrated now and I believe there is no solution here?! (device has no guarentee)
So, if someone has ANY hint or useful information write it down or send me a PM.
I gladly appreciate your help and hope for a solution!
Cheers
P.S.: I couldn't find any information saying Goldcard method works (or even exists) for Hermes. Can someone confirm it does really work?
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
mahi58 said:
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
Click to expand...
Click to collapse
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Thanks
bikertibi said:
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Click to expand...
Click to collapse
Thank you very much, my problem solved using the WM5 flashing process.
I thought it's impossible to get the phone connected to PC because activesync wasn't establishing a connection to the phone, but obviously I was wrong.
After flashing WM5, I performed a HSPL on the phone, and then used the file again, and the phone was upgraded to WM 6.5 with no problem.
I previously had downloaded your 6.5 ROM from a crappy forum, which was only including a download link and some useless info, and since I was a newbie myself D), I didn't even know that I should have performed a HSPL before upgrading the OS.