Helo.
I have a problem.Always when i close my Qtek 8500 on extern display runs camera and next second windows media player.I have tryed to instal wm6 and thinked that will lose my problem, but still hapends the same problem.I don't know, what can i do?Can it be a HW problem?
I would like to try flash the BinFS like by qtek 8310 to cleen the boot sector, but i don't konw how.With the TeraTempPro dos't work it.Any idea how to do it??
And i have ones more problem.Afte I have open my qtek more them one minute, and it get to display time out, always come from alone 76 keys on display..and then again camera and Win MP...
Please HELP.I don't know what to do..
Sorry for my anglish...
had that problem before... it was the physical phone though... it's the little ribbon cable/buttons inside your phone that are causing a push... I had to replace my ribbon cables from a donor phone and it fixed that issue for me...
tahnk you, I will try it...I'v got one more phone with defect display, i hope there are the cables ok taknk you...
you can also put it on button lock... that also stopped it from doing that...
till now, have I always button locked, becouse of it...but now, i have change this ribbon cable and everithing work again perfect...thank you very much
Related
hi to all,
i have this O2 XDA2 when i powered on the phone it begun to hang up then i can't press or use the PDA...even i removed the the battery and put it back always hangs...so i tried hard resseting it but after that always ALIGN SCREEN now apprears on the screen...
hope that anyone here has a solution to this problem...thanks and merry christmas
this problem is same as the problem i posted is the WALLABY section...
o2 xda2 always start with screen align
please pleasE help me
my o2 xda¡¡ always start with align screen
Happened to mine too. The touchpad was busted, you can't get past the align screen as the touchpad isn't accepting any input.
same problem here,are there some one can help?
make sure you press the + sign perfectly in middle
omg try to understant the ques.
the same prob happens to me..... the align screen appears many times to me and it wil reinstall new OS. so then it looks new ans lost all old settings & mess, contacts.
how to stop this bug?
yeap i now have the same problem, dont know what happen to my touch screen.. i can press the upper section windows bar, signal and all kind that is on top
can anyone help please?
Like it was said before, your touchscreen is busted ... in my case, i've change my lcd and touchscreen with one bought on ebay. But before to change your lcd, you can try to align your screen with your finger, not with your stylus.
Just put an empty welcome.not file in your SD card.
It should bypass the alignment screen.
If it doesn't, then do one alignment run,hit the power button, and turn it back on. It should work then.
Beware, though, that the screen will be unaligned. Manage to get to the alignment again, and repeat the process (hitting power button thing). Then it'll be aligned correctly (at least in my case it does...)
As Huefu posted the touchpad is dead my friend. There is another topic about the touchscreen being dead that I have posted on. You can buy one on ebay but beware there are two different screen types. So dismantle first to check the connectors on the back of your screen to make sure you get the right replacement.
Your looking around £30 and some patience. It's tricky to take the phone apart and reassemble. You can google for the XDA/MDA service manual, this will show you how to take it apart
Good luck
2 Years Ago i´ve got the Same Problem....I opened my Himalaya
and there was a bigger Piece of Tobacco (I´m Rolling my Cicarettes by myself)between the Screen and the Housing- you couldn´t see it from Outside.
...for my case this was the solution !
and this Year my Himalaya is getting 5 Years old
I would try this first before Buying a new Screen
...but ...as honosuseri mentionened before
There different Models with different Connectors
(i think 2 or 3 different Connectors)
watch out ! DOOD!
hi guys!i bought a qtek 2020 or i don t know what is it....o2 xdaII i tried to read about them! so problem is that...i don t have the connectors u know where u plug the charger so i bought an universal chargher...but every time i wanted to charge the baterry i had to pull it out...so after some time...my phone doesn t start i don't know why i also have a problem with the touch screen!every time i had to start the phone i had to calibrate..and in te top left corner...there was something on the screen i don t know what it is...at the begining the touch screen worked every time...but then i couldn t calibrate the screen anymore because...in the top left corner didn t work!
P.S. sorry about my english i hope u understand i am from romania....i wait advices from u ..pls help me ...by the way tomorrow..i will put photos with my phone
many himalayas suffer from hardreset at batt change so i'd sugest getting one of these
http://www.expansys.hu/p.aspx?i=147225
about the screen then you may need to buy a new touchsurface for the device it can be removed and changed without changing the whole lcd
thnx
thanks for the adivices i will post some pictures..so i can't use the craddle because i don t have the connector from the bottom of the phone
http://wiki.xda-developers.com/index.php?pagename=HimalayaHardwareOverview
http://wiki.xda-developers.com/index.php?pagename=HimalayaHardware
think your best bet is to find out the part name / nr of the connector and buy a new one
http://rswww.com/
if you ruin your touchscreen with having to calib it everytime you charge you batt it would be much more expensive
i have an spv m3100..and after firmware update the touch screen does not work(not does not align...does not work....)
please someone help me
If you have a friend with the same phone, download remote screen alignment. It copies the alignment information off the Hermes to a PC. You can then use the app on the pc to align the hermes on the 1st startup though if the digitizer is stuffed then it won't fix it as it will go out of alignment almost immediately.
You can use the phone and most functions using the hard ware buttons though it can be a pain.
Theres also a file you can download (apparently) that is on the sd card and allows you to bypass the alignment screen but I can't tell you much more about it.
Cheers...
thx for the answer...but my problem its not to align the screen.....its to get the screen work........................the screen doesnt response
sorry for my english.....
Exactly, if you Hard reset or flash a new rom thinking to fix it you will be stuck at the alignment screen.
My digitizer went on my Jasjam, I could still use the hardware keys to navigate but the touchscreen was useless. I did a HR on advice I got off here. BIG MISTAKE.... Luckily for me I have a friend with the Jasjam too, I downloaded remote screen alignment and could use it (minus the touchscreen) until I could fix the LCD.
I beliee your digitizer has gone bung and needs to be replaced, easier to purchase a LCD/digitizer combo as its easier to replace.
Cheers...
delete the welcome.ink that is in the windows\startup folder and it wont ask for the alignment to be made. but as ultramag69 has stated if the touch screen digitiser is broken, then it wont be of any help. Out of curiosity, did the touchscreen work fine before you flashed the rom or is that the rreason you flashed a new rom, to try and fix it?
i can use my phone......but the touchscreen does not work...i reflash the old firmware...and again does not work.......how can i do hard reset?...and what is the cost of lcd/digitizer?
My screen is off most of the time now.
I open and close the keyboard a few times and it turns white!
Sometimes (like 1 time out of 100) I get lucky and it turns on! But with no backlit, what makes it very hard to read.
I know the problem is the flexboard (I opened my Cingular 8125 and noticed the flex is broken/cut).
Where can I get a new one?
Anyone as a broken Cingular 8125 and wants to sell me this part?
Thank you for your help.
i have the same problem... try this http://www.cellulardr.com/Cingular8125FlexCable.htm but its hard because its do it yourself and what if the part is broken.. i dont know man.. im having a hard time too...
DITTO..
my wing just started this..
Hi everyone,
I'm new posting here but i folow some tips and tricks from this forum along ago.
First sorry if my English is not always correct i now it... I am Portuguese.
I need some help with my xperia Z2, i wil describe step by step:
The touch of Z2 broken and after that booth LCD and Touch doesnt do anything, no image no light and no response from touch but the phone turns on and off, so I change booth lcd and touch from a official seller but it still almost the same no light and no image, it still turns on and now i ear the touch working but i do know what i am touching i can see nothing in the lcd... Then i replace the main flex thinking it could be a problem with the cable but it still the same... I tried to flash some roms and update with pc companion and all worked fine except the lcd stills the same... no image and no light... Someone can help me i dont know what to do now i about to selling it for pieces its all new in this phone except the mainboard... could be a problem in the board???
I almost forgot, it receives calls and sms but i dont see anything... i think all the function are ok just the image not.
I searched for hours in this forum something like this but i didnt found anything, i tried some tricks like the rubber and power + vol up but didnt worked. Help please before i sell it for peaces.
Greetings to all.
Sounds like the board to me, you've changed everything else so it doesn't leave anything else really
I think this can be closed if there is no more solutions... i tried everything... if anyone needs pieces for a xperia Z2 just tell me i have a new touch and lcd mounted on it i think someone could use the case of it... the board just for pieces its damaged.