hi guys!i bought a qtek 2020 or i don t know what is it....o2 xdaII i tried to read about them! so problem is that...i don t have the connectors u know where u plug the charger so i bought an universal chargher...but every time i wanted to charge the baterry i had to pull it out...so after some time...my phone doesn t start i don't know why i also have a problem with the touch screen!every time i had to start the phone i had to calibrate..and in te top left corner...there was something on the screen i don t know what it is...at the begining the touch screen worked every time...but then i couldn t calibrate the screen anymore because...in the top left corner didn t work!
P.S. sorry about my english i hope u understand i am from romania....i wait advices from u ..pls help me ...by the way tomorrow..i will put photos with my phone
many himalayas suffer from hardreset at batt change so i'd sugest getting one of these
http://www.expansys.hu/p.aspx?i=147225
about the screen then you may need to buy a new touchsurface for the device it can be removed and changed without changing the whole lcd
thnx
thanks for the adivices i will post some pictures..so i can't use the craddle because i don t have the connector from the bottom of the phone
http://wiki.xda-developers.com/index.php?pagename=HimalayaHardwareOverview
http://wiki.xda-developers.com/index.php?pagename=HimalayaHardware
think your best bet is to find out the part name / nr of the connector and buy a new one
http://rswww.com/
if you ruin your touchscreen with having to calib it everytime you charge you batt it would be much more expensive
Related
hi to all,
i have this O2 XDA2 when i powered on the phone it begun to hang up then i can't press or use the PDA...even i removed the the battery and put it back always hangs...so i tried hard resseting it but after that always ALIGN SCREEN now apprears on the screen...
hope that anyone here has a solution to this problem...thanks and merry christmas
this problem is same as the problem i posted is the WALLABY section...
o2 xda2 always start with screen align
please pleasE help me
my o2 xda¡¡ always start with align screen
Happened to mine too. The touchpad was busted, you can't get past the align screen as the touchpad isn't accepting any input.
same problem here,are there some one can help?
make sure you press the + sign perfectly in middle
omg try to understant the ques.
the same prob happens to me..... the align screen appears many times to me and it wil reinstall new OS. so then it looks new ans lost all old settings & mess, contacts.
how to stop this bug?
yeap i now have the same problem, dont know what happen to my touch screen.. i can press the upper section windows bar, signal and all kind that is on top
can anyone help please?
Like it was said before, your touchscreen is busted ... in my case, i've change my lcd and touchscreen with one bought on ebay. But before to change your lcd, you can try to align your screen with your finger, not with your stylus.
Just put an empty welcome.not file in your SD card.
It should bypass the alignment screen.
If it doesn't, then do one alignment run,hit the power button, and turn it back on. It should work then.
Beware, though, that the screen will be unaligned. Manage to get to the alignment again, and repeat the process (hitting power button thing). Then it'll be aligned correctly (at least in my case it does...)
As Huefu posted the touchpad is dead my friend. There is another topic about the touchscreen being dead that I have posted on. You can buy one on ebay but beware there are two different screen types. So dismantle first to check the connectors on the back of your screen to make sure you get the right replacement.
Your looking around £30 and some patience. It's tricky to take the phone apart and reassemble. You can google for the XDA/MDA service manual, this will show you how to take it apart
Good luck
2 Years Ago i´ve got the Same Problem....I opened my Himalaya
and there was a bigger Piece of Tobacco (I´m Rolling my Cicarettes by myself)between the Screen and the Housing- you couldn´t see it from Outside.
...for my case this was the solution !
and this Year my Himalaya is getting 5 Years old
I would try this first before Buying a new Screen
...but ...as honosuseri mentionened before
There different Models with different Connectors
(i think 2 or 3 different Connectors)
watch out ! DOOD!
Helo.
I have a problem.Always when i close my Qtek 8500 on extern display runs camera and next second windows media player.I have tryed to instal wm6 and thinked that will lose my problem, but still hapends the same problem.I don't know, what can i do?Can it be a HW problem?
I would like to try flash the BinFS like by qtek 8310 to cleen the boot sector, but i don't konw how.With the TeraTempPro dos't work it.Any idea how to do it??
And i have ones more problem.Afte I have open my qtek more them one minute, and it get to display time out, always come from alone 76 keys on display..and then again camera and Win MP...
Please HELP.I don't know what to do..
Sorry for my anglish...
had that problem before... it was the physical phone though... it's the little ribbon cable/buttons inside your phone that are causing a push... I had to replace my ribbon cables from a donor phone and it fixed that issue for me...
tahnk you, I will try it...I'v got one more phone with defect display, i hope there are the cables ok taknk you...
you can also put it on button lock... that also stopped it from doing that...
till now, have I always button locked, becouse of it...but now, i have change this ribbon cable and everithing work again perfect...thank you very much
Hi , i got today samsung galaxy s2 and really its the best smartphone and i think only Samsung can beat themselves no one can match their technology, i have only one issue with the phone when i m charging the phone the touch screen does not respond smoothly and when i try to scroll it clicks and open the icon where my finger, however when i remove the charger it works perfect and smooth, i have tried flat on table and also while holding it in my hand and scrolling is not smooth while charging, does anyone faced same issue. plz let em knw
You sure TS isn't responding when charging? Or is it happening all time.
Besides, make sure that the Screen/Screen protector, if you've applied one, is dry and clean and also your fingers. Humidity on your finger or TS could create that problem.
Regards.
It´s the charger. When you use a non official charger It may happend. Try an original one
Thx fr the quick replies guys. i dnt have any screen guard n also my hands were dry i did the test thrice bfore postin this reply n im using orignal charger n usb cable.can u test it n chck if afacing same issue like mine. two more question is battery life poor coz in four hours it down tofifty percent with edge netwrk wit fb n whatapp usage n also sum calls.which rom is good one as im confused can u guys suggest thx
I have this issue as well but ONLY when using cheap third party chargers I ordered off eBay. The official charger and charging through USB from a computer do not cause the issue.
The question here is: why? Is Samsung intentionally causing issues when you don't use an official charger?
i have Xperia mini (st15i) cell phone. there was a lot of dust inside it and over its LCD screen so i opened the screws of this and cleaned the dust from inside and from the screen also. but when i assembled the phone again and turned the phone ON there is no display. only the light on the top of the phone is turning ON and there is no other light on the phone or screen is turning ON. phone also vibrates when i turn it on as usual only display is not coming.
I have replaced the LCD screen with new one but problem is same. i dont know what to do know please help me to solve this problem. i will be very thankful to you..
Aashirg said:
i have Xperia mini (st15i) cell phone. there was a lot of dust inside it and over its LCD screen so i opened the screws of this and cleaned the dust from inside and from the screen also. but when i assembled the phone again and turned the phone ON there is no display. only the light on the top of the phone is turning ON and there is no other light on the phone or screen is turning ON. phone also vibrates when i turn it on as usual only display is not coming.
I have replaced the LCD screen with new one but problem is same. i dont know what to do know please help me to solve this problem. i will be very thankful to you..
Click to expand...
Click to collapse
probably u damaged yr board or the connection cable. thats why u never should do sth if u not know what u are EXACTLY doing.
we cant really help here, bcuz to do this we would dissassemble the device & take a look. bring it to a tech shop, bcuz like said sth with the HW is surely damaged. sry
today i was checking the phone LCD today and during checking phone display appeared for few moment and than disappeared again.
bejunk said:
probably u damaged yr board or the connection cable. thats why u never should do sth if u not know what u are EXACTLY doing.
we cant really help here, bcuz to do this we would dissassemble the device & take a look. bring it to a tech shop, bcuz like said sth with the HW is surely damaged. sry
Click to expand...
Click to collapse
Why, hello there!
First of all i would like to apologize for two things:
(1) My English is awful so bear with me please!
(2) I couldn't find an answer for this question and i tried really hard. So if there does exist an answer please point me to it nicely
Now, concerning my problem.
I have bought Elephone P8 from Banggood . com
(link could not be uploaded cause i am a new user)
(if you want to view the phone go to Banggood and searh for Elephone P8 :angel: )
From Day 1 I have had a problem with my screen. It touches itself!!
I didn't do anything for that problem as i didn't believe it could be possible for a phone to touch the screen itself.
Now into details:
When i unlock my phone and use it after a couple of minutes (i have enabled the option to view the clicks on the screen) i see thousand clicks on my touchscreen in a vertical line. From the speaker (where you talk) to the home button. It is always in the same line!!
And when i close the display of my phone and unlock it again, the thousand clicks stop and the phone works normally again.. :/
I know that it is hardware problem because i have changed roms, i have rooted and i did all i could to fix it softwarely! :fingers-crossed: SO i am convinsed it is Hardwared reallated issue! :victory:
MY QUESTION IS:
How can i fix this problem if i want to open my phone?? If i change the glue between the glass and the LCD will it fix it??
Please , please , please! Don't tell me to send it back and ask for a new one OR take it to an expert to fix it!
THANKS A BUNCH GUYS!!!
It could (!) be just some stress on the Screen. Maybe you could do something if you just disassemble it, look where the stress could come from, and put it together again after that.
I had that a few years before, and for me was the Solution to bend the Case a bit, in which the Screen was pressed.
Hopefully that works for you
Thanks for your reply man! I really appreciate it!
Now that you mention it, when i dissasembled my phone i couldnt unscrew the last screw that is attaching the motherboard to the screen. It was so hardly screwed!
Maybe that little screw does the job, so i will try and unscrew it!
ONE MORE THING
If for some reason i can't find the pressure point from inside the phone, what other options do i have?? Since i have scratched the front glass a bit, i am in the temptation to change the front glass and clean the Screen a bit.
What do you think?
P.S.: Further advice is very much appreciated!