important pls answer me q ! - G4

i have xda o2 mini s and it was Dutch lang. so i flashed to engish rom tnt 6
from the explain for mr its right , so now i want to flash arabic version
from i mate clup k-jam and thats the link ...
ftp://ftp.clubimate.com/K-JAM_Arabic_2160901_21609102_20710_ship.zip
BUT i mean i flash it with the way for G4 with that tool > START-sSPL.exe
and the other files < and i just add the nk.nbf to the other files than i have
arabic rom , so its work or not coz iam not sure , thx for the answer .​

NO, don't do that!
With either SoftSPL or HardSPL, you can only flash ROMs that doesn't have IPL and SPL. The original factory ROM must have IPL and SPL inside. You must extract and reassembly nk.nbf with only OS.nb, otherwise your device will brick if you continue flashing.

1st thanks so much starkwong ...
2nd with which programe i can extract and reassembly nk.nbf with only OS.nb thx again your brother magdi .

Well,it depends which method you adopted first to flash wm6 TNT rom on your phone.If you applied HardSPL,then first you'll have to remove HardSPL,flash back to official Bootloaders (IPL/SPL), only after that you can revert back to the official k-jam rom.Coz HardSPL flashes patched Bootloaders(IPL/SPL),But if you did it with SoftSPL,there's no need to do anything as it reverses itself after the flash and reboot of the phone,the original Bootloaders(IPL/SPL) are back in originality.So just download the official rom and flash.
What IPL/SPL are displayed at the present in your phone ?

1st thx mr/mrs zabardast_1
2nd i still have the orginal IPL/SPL with g4 and iam sure from it coz i didnt change them coz i was use SoftSPL..
but basicly i have room from k jam club orginal arabic ( conating extened room , ipl , spl , radio ect .. ) so i wanted to make extract and reassembly nk.nbf with only OS.nb for the OS only with nk.nbf to use it with SoftSPL patch with that file > START-sSPL.exe < and the orginal is wm5 not 6 or tnt ...thx again your brother magdi

Related

Downgrading to WM5

Hi There
I'm now running the original but updatet T-Mobile version but i'd like to upgrade to WM6. unless it's her in german i'd like to have a possibility to downgrade again!
Can i just flash the old t-mobile files if i'm mad of rading english all day long??
Or will i need special rom to reflash WM5??
YOur's
Seppel
you can downgrade to whatever WM5 rom you like.
Cheers,
vlodeck.
Downgradeing problem
I'm now in TouchFlo 2.1 and i want back to wm 5.0 but i try the two uk rom,s and i get errors like ,you can't run this nbf ,try a newer one or update utility not for this device.What should i do???
cody28 said:
I'm now in TouchFlo 2.1 and i want back to wm 5.0 but i try the two uk rom,s and i get errors like ,you can't run this nbf ,try a newer one or update utility not for this device.What should i do???
Click to expand...
Click to collapse
I used the german AKU3.3 ROM and it showed 'Upgrade from V4.0.0.0 to V3.3.0.0'.
Maybe you have used an old AKU2.x ROM to downgrade?
And... try downgrading in bootloader mode (hold tape button while soft-reset until colored bars are shown, but you need different active-sync drivers for bootloader mode)
downgade problem
I succed to downdrade to germab t-mobile rom but i need a wwe rom ,i'm not familiar with german language,and the uk roms just don,t work .update error.
Once you upgraded to AKU 3.3 you cant go back to AKU2. The only thing that could help is flashing the prophet rom but it can be dangerous. Search the prophet section if you want to do it.
Hi vlodeck
I upgraded already to aku3, but i would like to upgrade to wm6
do you know a good way to do so ?
downgrading to aku2 does not work - as you said!
regards
use
BootLoader.exe anywhere (ïîìîåìó) Forum
hmm ... didn´t find a description what to do, but tried to downgrade back to orginal aku2 in bootloader mode:
ERROR [296] : UPGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get newer NBF file.
How to downgrade 38221_382116_026921_TMO_UK_WWE_Ship
(SPL 3.08.0001) back to orginal 1120223_11202110_11220_T-MobileUK_Ship ?

Reset all (Rom ipl,spl,radio..)to the original

Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Bram87 said:
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Click to expand...
Click to collapse
Well, this is not EXACTLY correct. Check out THIS LINK for downgrade directions. You will need to get the original ROM from somewhere. It is possible that it is HERE IN THE WIKI. Chances are that one of the files there has the same Radio, IPL & SPL. You will just need to find the OS, if it is not in there. (In fact, based on the specs, it looks like the third from the bottom of the English ones - Vodafone?) To flash, you will need dutty's good nbh tool to unpack the ROM, becuase you will need to do the IPL and SPL separately from the OS and radio. See THIS LINK for that info. If you don't want to get into all the unpacking, you *could* do the SPL downgrade first, then the upgrade, but it is generally good practice to downgrade SPL as a LAST step since you lose the hardspl protection as soon as you do it. Finally, use the google search link in my signature if you need to find anything else. Good luck.
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Like Todd said it is possible.
Check out the links in my signature and read alot before actually doing so.....
That is a practice tip
The Mr VanX guide alias HTC Hermes guide has complete steps to do this!
Good Luck
Ok, tell me if i correctly understand..
I found the correct rom, after i have to unpack this rom with dutty's good nbh tool..(i have to remove Ipl & Spl?).
After the unpack i have to pack again the rom without ipl and spl and flash it in my Herm??!!is it correct? And in the end i have to change ipl and spl(is it a down grade?).
Last questions yet,
What i have to verify first that i start all this work on my herm to not brick my Herm?
Thank you to all again for the help that you are giving to me
All the best
I may have made it more complicated. That is the process I use.
Best thing to do is simply follow Mrvanx guides.
First downgrade the OS/Radio using THIS GUIDE
Then downgrade SPL/IPL using THIS GUIDE
That is all - as long as you have HardSPL, it is VERY hard to brick your device. So, do that last.
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
zetax said:
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
Click to expand...
Click to collapse
Yes. The only reason to remove HardSPL is for warranty. Just for clarification, there is no Hard IPL, only Hard SPL, but I know what you mean.
Basically, 99% of the time most of us flash we are only flashing OS or Radio. SPL and IPL don't change often. Most cooked ROMs are released as OS only.
Ah ok perfect, i'm not interested to the device warranty, because i bought it on ebay from Uk, and there is no warranty on my device, so i can only flash os without ipl and spl..
Thank you very much fo all the help
<< ZX >>
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
zetax said:
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
Click to expand...
Click to collapse
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
todd_jg said:
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
Click to expand...
Click to collapse
Todd, thanks very much, i didn't know that with winrar was possible to unpack an .exe file,now i have all i need to flash my device with the hold or the new vodafone uk rom.
Tnx my friend
I have done the flashing, it works perfect.. now i learn the way, i can flash every kind of Os in my tytn following this way?for example o2(Uk) os can be put in my device?
Where here in xda forum can i find the software(for eample the software that shaps have included in his Os) for my device customization?like today home,weather widget, or the automatic operator configurator etc etc?
Tnx todd

cannot install imate jamin original rom after installing evo8en - help

hi
i have a G4 imate jamin
i upgraded it to wm6 evo8enbefore upgrading i used the instructions to first install RUU_Prophet_220734_2207114_024721_NVID and then upgrade to wm6.
my imate has changed into a QTECK (welcome screen)
but now that i want to downgrade and use the imate original rom i cant
it gives me error 296 (the nbf file cannot be used.)
i tried to CIDunlock using the wiki method.
when i run the downgrade.bat it worked fine and finished but when i soft reset to do the next steps (runnıng unlockcid.bat) my imate freezed and did not boot.
can some body help me on how can i install the imate orginal rom on my jamin again???????
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
mcupurdija said:
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
Click to expand...
Click to collapse
yes this should be notified properly ,also usb switch is missing in instructions too .

Upgrade Issue ...

Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
skunknet said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
JumpSPL only works once, you have to run it prior to every Rom uopgrade you want to do.
The "New WM6 Upgrade Guide" is based on an other method, namely HardSPL instead of JumpSPL. The advantage is that HardSPL stays resident (until you flash another SPL) so you don't have to bother again with the SPL issue every time you want to flash.
So, if you are aquainted en comfortable with the way you did your first upgrade: Run JumpSPL first and the RUU afterwards, do it again with your new upgrade attempt. The result is the same, it's only one step more to execute.
Try~~
skunknet;1806937 said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
HERE:
http://forum.xda -developers.com /showthread.php?t=353547
enjoy ~~~
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
skunknet said:
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
Click to expand...
Click to collapse
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Sorry...
rondol1 said:
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Click to expand...
Click to collapse
Sorry for the broken link in the previous post
Please have a look here:-...
http://forum.xda-developers.com/showthread.php?t=353547
hope it helps~~ ^_^
Many thanx guys ...
i've upgrade successfully my G4 device to WM6 ....
I've upgrade to Prophet Touch VIII using jumpspl ....
Many thanx at all for information ....

T-Mobil (MDA Touch Plus) Rebuilt Shipping Rom

hello,
this german rom is rebuild by using the NetrunnerAT Niki Kitchen mixed with Kaiser Rebuilt Kitchen. It flashes only the OS Part. No Bootloader and no Splashscreen.
It's Just for Backup Purposes
I initial flashing procedure with SSPL of SSPL of jockyw2001 on phone side and CustomRUU from Niki Project Rom (I think it's this one) on PC side.
I recommend everybody, who want to try this rom to install HardSPL.
Everything you do is on your own risk.
but have fun!
Download: http://www.megaupload.com/de/?d=A1HRLPFD
what radio
is there a radio cooced in this rom and if so which version cheers
!
It´s only the OS Part
I have all ready dumped ... since over 1 month :->

Categories

Resources